arXiv subjects

Masahiro N. Machida

Publications and source records attributed to Masahiro N. Machida.

At least 145 records · Page 8Linked to original sources

arXiv2010

Gas Accretion onto a Protoplanet and Formation of a Gas Giant Planet

We investigate gas accretion onto a protoplanet, by considering the thermal effect of gas in three-dimensional hydrodynamical simulations, in which the wide region from a protoplanetary gas disk to a Jovian radius planet is resolved using the nested-grid method. We estimate the mass accretion rate and growth timescale of gas giant planets. The mass accretion rate increases with protoplanet mass for M_p < M_cri, while it becomes saturated or decreases for M_p > M_cri, where M_cri = 0.036 M_Jup (a_p/1AU)^0.75, and M_Jup and a_p are the Jovian mass and the orbital radius, respectively. The growth timescale of a gas giant planet or the timescale of the gas accretion onto the protoplanet is about 10^5 yr, that is two orders of magnitude shorter than the growth timescale of the solid core. The thermal effects barely affect the mass accretion rate because the gravitational energy dominates the thermal energy around the protoplanet. The mass accretion rate obtained in our local simulations agrees quantitatively well with those obtained in global simulations with coarser spatial resolution. The mass accretion rate is mainly determined by the protoplanet mass and the property of the protoplanetary disk. We find that the mass accretion rate is correctly calculated when the Hill or Bondi radius is sufficiently resolved. Using the oligarchic growth of protoplanets, we discuss the formation timescale of gas giant planets.

astro-ph.SR↗

arXiv2010

Radiation Magnetohydrodynamics Simulation of Proto-Stellar Collapse: Two-Component Molecular Outflow

We perform a three-dimensional nested-grid radiation magneto-hydrodynamics (RMHD) simulation with self-gravity to study the early phase of the low-mass star formation process from a rotating molecular cloud core to a first adiabatic core just before the second collapse begins. Radiation transfer is handled with the flux-limited diffusion approximation, operator-splitting and implicit time-integrator. In the RMHD simulation, the outer region of the first core attains a higher entropy and the size of first core is larger than that in the magnetohydrodynamics simulations with the barotropic approximation. Bipolar molecular outflow consisting of two components is driven by magnetic Lorentz force via different mechanisms, and shock heating by the outflow is observed. Using the RMHD simulation we can predict and interpret the observed properties of star-forming clouds, first cores and outflows with millimeter/submillimeter radio interferometers, especially the Atacama Large Millimeter/submillimeter Array (ALMA).

astro-ph.SR↗

arXiv2010

Formation Process of the Circumstellar Disk: Long-term Simulations in the Main Accretion Phase of Star Formation

The formation and evolution of the circumstellar disk in unmagnetized molecular clouds is investigated using three-dimensional hydrodynamic simulations from the prestellar core until the end of the main accretion phase. In collapsing clouds, the first (adiabatic) core with a size of ~10AU forms prior to the formation of the protostar. At its formation, the first core has a thick disk-like structure, and is mainly supported by the thermal pressure. After the protostar formation, it decreases the thickness gradually, and becomes supported by the centrifugal force. We found that the first core is a precursor of the circumstellar disk. This indicates that the circumstellar disk is formed before the protostar formation with a size of ~10AU, which means that no protoplanetary disk smaller than <10AU exists. Reflecting the thermodynamics of the collapsing gas, at the protostar formation epoch, the circumstellar disk has a mass of ~0.01-0.1 solar mass, while the protostar has a mass of ~10^-3 solar mass. Thus, just after the protostar formation, the circumstellar disk is about 10-100 times more massive than the protostar. Even in the main accretion phase that lasts for ~10^5yr, the circumstellar disk mass dominates the protostellar mass. Such a massive disk is unstable to gravitational instability, and tends to show fragmentation. Our calculations indicate that the planet or brown-dwarf mass object may form in the circumstellar disk in the main accretion phase. In addition, the mass accretion rate onto the protostar shows strong time variability that is caused by the perturbation of proto-planets and/or the spiral arms in the circumstellar disk. Such variability provides a useful signature for detecting the planet-sized companion in the circumstellar disk around very young protostars.

astro-ph.SR↗

arXiv2009

Star Formation in Relic HII Regions of the First Stars: Binarity and Outflow Driving

Star formation in relic HII regions of the first stars is investigated using magneto-hydrodynamical simulations with a nested grid method that covers 10 orders of magnitude in spatial scale and 20 orders of magnitude in density contrast. Due to larger fraction of H_2 and HD molecules, its prestellar thermal evolution is considerably different from that in the first star formation. Reflecting the difference, two hydrostatic cores appear in a nested manner: a protostar is enclosed by a transient hydrostatic core, which appears during the prestellar collapse. If the initial natal core rotates fast at a rate with rotational to gravitational energy ratio β_0 > 0.01-0.1, the transient hydrostatic core fragments to \sim 10 M_\odot sub-cores at density \sim 10^9 cm^-3. With smaller rotation energy, fragmentation occurs at higher density while a single protostar forms without fragmentation if rotation is extremely slow with β_0 < 10^-6 -10^-5. If magnetic field is present, these threshold values of β_0 is boosted owing to angular momentum transport by the magnetic breaking. Magnetic field also drives the protostellar outflows. With strong magnetic field, two distinct outflows are observed: The slower one emanates from the transient hydrostatic core, while the faster one from the protostar. These flows may affect the final stellar mass by ejecting some of masses in the initial core, and also may play some role in driving and maintenance of interstellar turbulence in young galaxies.

astro-ph.SR↗

arXiv2009

Protostellar Jet and Outflow in the Collapsing Cloud Core

We investigate the driving mechanism of outflows and jets in star formation process using resistive MHD nested grid simulations. We found two distinct flows in the collapsing cloud core: Low-velocity outflows (sim 5 km/s) with a wide opening angle, driven from the first adiabatic core, and high-velocity jets (sim 50 km/s) with good collimation, driven from the protostar. High-velocity jets are enclosed by low-velocity outflow. The difference in the degree of collimation between the two flows is caused by the strength of the magnetic field and configuration of the magnetic field lines. The magnetic field around an adiabatic core is strong and has an hourglass configuration. Therefore, the low-velocity outflow from the adiabatic core are driven mainly by the magnetocentrifugal mechanism and guided by the hourglass-like field lines. In contrast, the magnetic field around the protostar is weak and has a straight configuration owing to Ohmic dissipation in the high-density gas region. Therefore, high-velocity jet from the protostar are driven mainly by the magnetic pressure gradient force and guided by straight field lines. Differing depth of the gravitational potential between the adiabatic core and the protostar cause the difference of the flow speed. Low-velocity outflows correspond to the observed molecular outflows, while high-velocity jets correspond to the observed optical jets. We suggest that the protostellar outflow and the jet are driven by different cores (the first adiabatic core and protostar), rather than that the outflow being entrained by the jet.

astro-ph.SR↗

arXiv2009

First Direct Simulation of Brown Dwarf Formation in a Compact Cloud Core

Brown dwarf formation and star formation efficiency are studied using a nested grid simulation that covers five orders of magnitude in spatial scale (10^4 - 0.1AU). Starting with a rotating magnetized compact cloud with a mass of 0.22 M_sun, we follow the cloud evolution until the end of main accretion phase. Outflow of about 5 km/s emerges about 100 yr before the protostar formation and does not disappear until the end of the calculation. The mass accretion rate declines from 10^-6 M_sun/yr to 10^-8 - 10^-12 M_sun/yr in a short time (about 10^4 yr) after the protostar formation. This is because (1) a large fraction of mass is ejected from the host cloud by the protostellar outflow and (2) the gas escapes from the host cloud by the thermal pressure. At the end of the calculation, 74% (167 M_Jup) of the total mass (225 M_Jup) is outflowing from the protostar, in which 34% (77 M_Jup) of the total mass is ejected by the protostellar outflow with supersonic velocity and 40% (90 M_Jup) escapes with subsonic velocity. On the other hand, 20% (45 M_Jup) is converted into the protostar and 6% (13 M_Jup) remains as the circumstellar disk. Thus, the star formation efficiency is epsilon = 0.2. The resultant protostellar mass is in the mass range of brown dwarfs. Our results indicate that brown dwarfs can be formed in compact cores in the same manner as hydrogen-burning stars, and the magnetic field and protostellar outflow are essential in determining the star formation efficiency and stellar mass.

astro-ph.SR↗

arXiv2009

The Circumbinary Outflow: A Protostellar Outflow Driven by a Circumbinary Disk

The protostellar outflows have indispensable role in the formation of single stars, because they carry off the excess angular momentum from the centre of the shrinking gas cloud, and permits further collapse to form a star. On the other hand, a significant fraction of stars is supposed to be born as binaries with circumbinary disk that are frequently observed. Here, we investigate the evolution of a magnetized rotating cloud using three-dimensional resistive MHD nested-grid code, and show that the outflow is driven by the circumbinary disk and has an important role even in the binary formation. After the adiabatic core formation in the collapsing cloud core, the magnetic flux is significantly removed from the centre of the cloud by the Ohmic dissipation. Since this removal makes the magnetic braking ineffective, the adiabatic core continuously acquires the angular momentum to induce fragmentation and subsequent binary formation. The magnetic field accumulates in the circumbinary disk where the removal and accretion of magnetic field are balanced, and finally drives circumbinary outflow. This result explains the spectacular morphology of some specific young stellar objects such as L1551 IRS5. We can infer that most of the bipolar molecular outflows observed by low density tracers (i.e., CO) would correspond to circumbinary or circum-multiple outflows found in this report, since most of the young stellar objects are supposed to be binaries or multiples.

astro-ph.SR↗

arXiv2009

Binary Formation with Different Metallicities: Dependence on Initial Conditions

The fragmentation process in collapsing clouds with various metallicities is studied using three-dimensional nested-grid hydrodynamics. Initial clouds are specified by three parameters: cloud metallicity, initial rotation energy and initial cloud shape. For different combinations of these parameters, we calculate 480 models in total and study cloud evolution, fragmentation conditions, orbital separation and binary frequency. For the cloud to fragment during collapse, the initial angular momentum must be higher than a threshold value, which decreases with decreasing metallicity. Although the exact fragmentation conditions depend also on the initial cloud shape, this dependence is only modest. Our results indicate a higher binary frequency in lower-metallicity gas. In particular, with the same median rotation parameter as in the solar neighbourhood, a majority of stars are born as members of binary/multiple systems for < 10^-4 Z_sun. With initial mass < 0.1 M_sun, if fragments are ejected in embryo from the host clouds by multi-body interaction, they evolve to substellar-mass objects. This provides a formation channel for low-mass stars in zero- or low-metallicity environments.

astro-ph.GA↗

arXiv2008

Thermal Effects of Circumplanetary Disk Formation around Proto-Gas Giant Planets

The formation of a circumplanetary disk and accretion of angular momentum onto a protoplanetary system are investigated using 3D hydrodynamical simulations. The local region around a protoplanet in a protoplanetary disk is considered with sufficient spatial resolution: the region from outside the Hill sphere to the Jovian radius is covered by the nested-grid method. To investigate the thermal effects of the circumplanetary disk, various equations of state are adopted. Large thermal energy around the protoplanet slightly changes the structure of the circumplanetary disk. Compared with a model adopting an isothermal equation of state, in a model with an adiabatic equation of state, the protoplanet's gas envelope extends farther, and a slightly thick disk appears near the protoplanet. However, different equations of state do not affect the acquisition process of angular momentum for the protoplanetary system. Thus, the specific angular momentum acquired by the system is fitted as a function only of the protoplanet's mass. A large fraction of the total angular momentum contributes to the formation of the circumplanetary disk. The disk forms only in a compact region in very close proximity to the protoplanet. Adapting the results to the solar system, the proto-Jupiter and Saturn have compact disks in the region of r < 21 r_J (r < 0.028 r_HJ) and r < 66 r_S (r < 0.061 r_HS), respectively, where r_J (r_HJ) and r_S (r_HS) are the Jovian and Saturnian (Hill) radius, respectively. The surface density has a peak in these regions due to the balance between centrifugal force and gravity of the protoplanet. The size of these disks corresponds well to the outermost orbit of regular satellites around Jupiter and Saturn. Regular satellites may form in such compact disks around proto-gas giant planets.

astro-ph↗

arXiv2008

Magneto-Hydrodynamics of Population III Star Formation

Jet driving and fragmentation process in collapsing primordial cloud are studied using three-dimensional MHD nested grid simulations. Starting from a rotating magnetized spherical cloud with the number density of n=10^3 cm^-3, we follow the evolution of the cloud up to the stellar density n=10^22 cm^-3. We calculate 36 models parameterizing the initial magnetic and rotational energies (γ_0, β_0). In the collapsing primordial clouds, the cloud evolutions are characterized by the ratio of the initial rotational to magnetic energy, γ_0/β_0. The Lorentz force significantly affects the cloud evolution when γ_0 > β_0, while the centrifugal force is more dominant than the Lorentz force when β_0 > γ_0. When the cloud rotates rapidly with angular velocity of Ω_0 > 10^-17 (n/10^3 cm^-3)^2/3 s^-1 and β_0 > γ_0, fragmentation occurs before the protostar is formed, but no jet appears after the protostar formation. On the other hand, a strong jet appears after the protostar formation without fragmentation when the initial cloud has the magnetic field of B_0 > 10^-9 (n/10^3 cm^-3)^2/3 G and γ_0 > β_0. Our results indicate that proto-Population III stars frequently show fragmentation and protostellar jet. Population III stars are therefore born as binary or multiple stellar systems, and they can drive strong jets, which disturb the interstellar medium significantly, as well as in the present-day star formation, and thus they may induce the formation of next generation stars.

astro-ph↗

arXiv2008

Binary Formation in Star-Forming Clouds with Various Metallicities

Cloud evolution for various metallicities is investigated by three-dimensional nested grid simulations, in which the initial ratio of rotational to gravitational energy of the host cloud β_0 (=10^-1 - 10^-6) and cloud metallicity Z (=0 - Z_\odot) are parameters. Starting from a central number density of n = 10^4 cm^-3, cloud evolution for 48 models is calculated until the protostar is formed (n \simeq 10^23 cm^-3) or fragmentation occurs. The fragmentation condition depends both on the initial rotational energy and cloud metallicity. Cloud rotation promotes fragmentation, while fragmentation tends to be suppressed in clouds with higher metallicity. Fragmentation occurs when β_0 > 10^-3 in clouds with solar metallicity, while fragmentation occurs when β_0 > 10^-5 in the primordial gas cloud. Clouds with lower metallicity have larger probability of fragmentation, which indicates that the binary frequency is a decreasing function of cloud metallicity. Thus, the binary frequency at the early universe (or lower metallicity environment) is higher than at present day (or higher metallicity environment). In addition, binary stars born from low-metallicity clouds have shorter orbital periods than those from high-metallicity clouds. These trends are explained in terms of the thermal history of the collapsing cloud.

astro-ph↗

arXiv2008

The Effect of Poloidal Magnetic Field on Type I Planetary Migration: Significance of Magnetic Resonance

We study the effect of poloidal magnetic field on type I planetary migration by linear perturbation analysis in the shearing-sheet approximation and the analytic results are compared with numerical calculations. In contrast to the unmagnetized case, the basic equations that describe the wake due to the planet in the disk allow magnetic resonances at which density perturbation diverges. In order to simplify the problem, we consider the case without magneto-rotational instability. We perform two sets of analyses: two-dimensional and three-dimensional. In two-dimensional analysis, we find the generalization of the torque formula previously known in unmagnetized case. In three-dimensional calculations, we focus on the disk with very strong magnetic field and derive a new analytic formula for the torque exerted on the planet. We find that when Alfven velocity is much larger than sound speed, two-dimensional torque is suppressed and three-dimensional modes dominate, in contrast to the unmagnetized case.

astro-ph↗

arXiv2008

Angular Momentum Accretion onto a Gas Giant Planet

We investigate the accretion of angular momentum onto a protoplanet system using three-dimensional hydrodynamical simulations. We consider a local region around a protoplanet in a protoplanetary disk with sufficient spatial resolution. We describe the structure of the gas flow onto and around the protoplanet in detail. We find that the gas flows onto the protoplanet system in the vertical direction crossing the shock front near the Hill radius of the protoplanet, which is qualitatively different from the picture established by two-dimensional simulations. The specific angular momentum of the gas accreted by the protoplanet system increases with the protoplanet mass. At Jovian orbit, when the protoplanet mass M_p is M_p < 1 M_J, where M_J is Jovian mass, the specific angular momentum increases as j \propto M_p. On the other hand, it increases as j \propto M_p^2/3 when the protoplanet mass is M_p > 1 M_J. The stronger dependence of the specific angular momentum on the protoplanet mass for M_p < 1 M_J is due to thermal pressure of the gas. The estimated total angular momentum of a system of a gas giant planet and a circumplanetary disk is two-orders of magnitude larger than those of the present gas giant planets in the solar system. A large fraction of the total angular momentum contributes to the formation of the circumplanetary disk. We also discuss the satellite formation from the circumplanetary disk.

astro-ph↗

arXiv2007

Conditions for the Formation of First-Star Binaries

The fragmentation process of primordial-gas cores during prestellar collapse is studied using three-dimensional nested-grid hydrodynamics. Starting from the initial central number density of n \sim10^3 cm^-3, we follow the evolution of rotating spherical cores up to the stellar density n \simeq 10^{22} cm^-3. An initial condition of the cores is specified by three parameters: the ratios of the rotation and thermal energies to the gravitational energy (β_0, and α_0, respectively), and the amplitude of the bar-mode density perturbation (A_ϕ). Cores with rotation β_0 > 10^{-6} are found to fragment during the collapse. The fragmentation condition hardly depends on either the initial thermal energy α_0 or amplitude of bar-mode perturbation A_ϕ. Since the critical rotation parameter for fragmentation is lower than that expected in the first star formation, binaries or multiples are also common for the first stars.

astro-ph↗

arXiv2007

Formation Scenario for Wide and Close Binary Systems

Fragmentation and binary formation processes are studied using three-dimensional resistive MHD nested grid simulations. Starting with a Bonnor-Ebert isothermal cloud rotating in a uniform magnetic field, we calculate the cloud evolution from the molecular cloud core (n=10^4 cm^-3) to the stellar core (n \simeq 10^22 cm^-3). We calculated 147 models with different initial magnetic, rotational, and thermal energies, and the amplitudes of the non-axisymmetric perturbation. In a collapsing cloud, fragmentation is mainly controlled by the initial ratio of the rotational to the magnetic energy, regardless of the initial thermal energy and amplitude of the non-axisymmetric perturbation. When the clouds have large rotational energies in relation to magnetic energies, fragmentation occurs in the low-density evolution phase (10^12 cm^-3 < n < 10^15 cm^-3) with separations of 3-300 AU. Fragments that appeared in this phase are expected to evolve into wide binary systems. On the other hand, fragmentation does not occur in the low-density evolution phase, when initial clouds have large magnetic energies in relation to the rotational energies. In these clouds, fragmentation only occurs in the high-density evolution phase (n > 10^17 cm^-3) after the clouds experience significant reduction of the magnetic field owing to Ohmic dissipation in the period of 10^12 cm^-3 < n < 10^15 cm^-3. Fragments appearing in this phase have separations of < 0.3 AU, and are expected to evolve into close binary systems. As a result, we found two typical fragmentation epochs, which cause different stellar separations. Although these typical separations are disturbed in the subsequent gas accretion phase, we might be able to observe two peaks of binary separations in extremely young stellar groups.

astro-ph↗

arXiv2007

Magnetic Fields and Rotations of Protostars

The evolution of the magnetic field and angular momentum in the collapsing cloud core is studied using three-dimensional resistive MHD nested grid simulations. Starting with a Bonnor-Ebert isothermal cloud rotating in a uniform magnetic field, we calculate the cloud evolution from the molecular cloud core (n=10^4 cm^-3) to the stellar core (n \simeq 10^22 cm^-3). The magnetic field strengths at the center of the clouds converge to a certain value as the clouds collapse, when the clouds have the same angular momenta but different strengths of the magnetic fields at the initial state. For 10^12 cm^-3 < n < 10^16 cm^-3, Ohmic dissipation considerably removes the magnetic field from the collapsing cloud core, and the magnetic field lines, which are strongly twisted for n <10^12 cm^-3, is de-collimated. The magnetic field lines are twisted and amplified again for nc > 10^16 cm^-3, because the magnetic field is recoupled with the warm gas. Finally, protostars at their formation epoch have 0.1-1kG of the magnetic fields, which are comparable to observations. The magnetic field strength of protostar slightly depends on the angular momentum of the host cloud. The protostar formed from the slowly rotating cloud core has a stronger magnetic field. The evolution of the angular momentum is closely related to the evolution of the magnetic field. The angular momentum in the collapsing cloud is removed by the magnetic effect. The formed protostars have 0.1-2 days of the rotation period at their formation epoch, which are slightly shorter than the observation. This indicates that the further removal mechanism of the angular momentum such as interaction between the protostar and disk, wind gas or jet is important in further evolution of the protostar.

astro-ph↗

arXiv2007

Driving Mechanism of Jets and Outflows in Star Formation Process

The driving mechanism of jets and outflows in star formation process is studied using resistive MHD nested grid simulations. We calculated cloud evolution from the molecular cloud core to the stellar core. In the collapsing cloud core, we found two distinct flows: Low-velocity flows (sim 5 km/s) with a wide opening angle, driven from the adiabatic core, and high-velocity flows (sim 30 km/s) with good collimation, driven from the protostar. High-velocity flows are enclosed by low-velocity flows after protostar formation. The difference in the degree of collimation between the two flows is caused by the strength of the magnetic field and configuration of the magnetic field lines. The magnetic field around an adiabatic core is strong and has an hourglass configuration; therefore, flows from the adiabatic core are driven mainly by the magnetocentrifugal mechanism and guided by the hourglass-like field lines. In contrast, the magnetic field around the protostar is weak and has a straight configuration owing to Ohmic dissipation in the high-density gas region. Therefore, flows from the protostar are driven mainly by the magnetic pressure gradient force and guided by straight field lines. Differing depth of the gravitational potential between the adiabatic core and the protostar cause the difference of the flow speed. Low-velocity flows correspond to the observed molecular outflows, while high-velocity flows correspond to the observed optical jets. We suggest that the outflow and the jet are driven by different cores, rather than that the outflow being entrained by the jet.

astro-ph↗

arXiv2006

Outflows driven by Giant Protoplanets

We investigate outflows driven by a giant protoplanet using three-dimensional MHD nested grid simulations. We consider a local region around the protoplanet in the protoplanetary disk, and calculate three models: (a) unmagnetized disk model, (b) magnetized disk model having magnetic field azimuthally parallel to the disk, and (c) magnetic field perpendicular to the disk. Outflows with velocities, at least, 10 km/s are driven by the protoplanets in both magnetized disk models, while outflow does not appear in unmagnetized disk model. Tube-like outflows along the azimuthal direction of the protoplanetary disk appear in model with magnetic field being parallel to the disk. In this model, the magnetically dominated regions (i.e., density gap) are clearly contrasted from other regions and spiral waves appear near the protoplanet. On the other hand, in model with magnetic field being perpendicular to the disk, outflows are driven by a protoplanet with cone-like structure just as seen in the outflow driven by a protostar. Magnetic field lines are strongly twisted near the protoplanet and the outflows have well-collimated structures in this model.These outflows can be landmarks for searching exo-protoplanets in their formation stages. Our results indicate that the accretion rate onto the protoplanet tend to have a larger value than that expected from previous hydrodynamical calculations, since a fraction of the angular momentum of circum-planetary disk is removed by outflows, enhanced non-axisymmetric patterns caused by magnetic field, and magnetic braking. Possible implications for observation are also briefly discussed.

astro-ph↗