arXiv subjects

Masataka Kobayashi

Publications and source records attributed to Masataka Kobayashi.

5 recordsLinked to original sources

arXiv2026

Fast and wide-range wavelength tuning of a III-V/Si3N4 external-cavity laser via two-step pulsed heating

Fast and wide-range wavelength switching is desirable for optical communications and photonic systems that are frequency-agile. However, thermo-optic (TO)-tuned integrated lasers often have limited switching times and tuning rates. This study demonstrates a hybrid-integrated III-V/Si3N4 external-cavity laser (ECL), combining a dual-microring Vernier filter with thermal pumping to give wide-range and fast wavelength control. The ECL provides single-mode static lasing wavelength tuning in the 1486-1614 nm range. Impulsive thermal pumping that is applied through microheaters with shorter duration and higher amplitude accelerates the switching time. A simple first-order thermal fit reproduces the measurements well, indicating that the TO-tuning dynamics are highly predictable. Consequently, two-step pulse thermal pumping is applied to the on-chip microheaters to exploit the initial quasi-linear heating transient and sustain the target wavelength at a subsequent equilibrium. The results show that 101 and 104 nm red- and blue-shift switches are achieved with quasi-linear tuning rates of 8.91 and 9.68 nm/us, respectively. This approach provides a practical route toward fast wavelength switching in TO-tuned ECLs, potentially extending their applicability within frequency-agile systems, such as wavelength-division multiplexed transceivers.

physics.optics↗

arXiv2026

Few-picosecond pulse generation featuring ultrafast spectral dynamics in gain-switched surface-grating DFB lasers via impulsive optical pumping

To investigate the physics of picosecond gain-switching dynamics in single-mode lasers under femtosecond optical pumping at room temperature, we designed and fabricated first-order surface-grating GaAs distributed-feedback (DFB) lasers with five systematically varied grating periods (120-124 nm), corresponding to lasing wavelengths of 825.7-849.5 nm (1.502-1.459 eV). The 124-nm-period device, closest to the quantum-well gain peak among the investigated devices, exhibited the highest output power and spectral bandwidth. Among all devices, the 122-nm-period DFB laser (838.2 nm, 1.480 eV) generated the shortest pulses, despite lasing at a higher photon energy and lower output power than the device closest to the gain peak. All devices exhibited characteristic down-chirp behavior that increased with excitation power. The shortest pulses had a chirped pulse width of 6.6 ps and a chirp rate of 0.13 meV/ps, whereas spectrally resolved measurements revealed a minimum pulse width of 3.8 ps (2.3 ps after deconvolution of the detection time resolution) near the central photon energy of the pulse spectrum. Numerical simulations revealed temporally and spatially resolved dynamics of photons, carriers, gain, and refractive index, reproducing the experimental results qualitatively and quantitatively. Furthermore, a mechanism for generating the shortest pulses at photon energies above the gain peak was identified and attributed to higher differential gain, saturation gain, and a higher transparency carrier density in the high-energy region of the gain spectrum. These experimental and theoretical results elucidate the intrinsic dynamics of picosecond pulse generation in gain-switched DFB lasers and provide design guidance for short-pulse generation and computational tools applicable to both optical and electrical pumping.

physics.optics↗

arXiv2025

Performance Evaluation of an Integrated System for Visible Light Communication and Positioning Using an Event Camera

Event cameras, featuring high temporal resolution and high dynamic range, offer visual sensing capabilities comparable to conventional image sensors while capturing fast-moving objects and handling scenes with extreme lighting contrasts such as tunnel exits. Leveraging these properties, this study proposes a novel self-localization system that integrates visible light communication (VLC) and visible light positioning (VLP) within a single event camera. The system enables a vehicle to estimate its position even in GPS-denied environments, such as tunnels, by using VLC to obtain coordinate information from LED transmitters and VLP to estimate the distance to each transmitter. Multiple LEDs are installed on the transmitter side, each assigned a unique pilot sequence based on Walsh-Hadamard codes. The event camera identifies individual LEDs within its field of view by correlating the received signal with these codes, allowing clear separation and recognition of each light source. This mechanism enables simultaneous high-capacity MISO (multi-input single-output) communication through VLC and precise distance estimation via phase-only correlation (POC) between multiple LED pairs. To the best of our knowledge, this is the first vehicle-mounted system to achieve simultaneous VLC and VLP functionalities using a single event camera. Field experiments were conducted by mounting the system on a vehicle traveling at 30 km/h (8.3 m/s). The results demonstrated robust real-world performance, with a root mean square error (RMSE) of distance estimation within 0.75 m for ranges up to 100 m and a bit error rate (BER) below 0.01 across the same range.

cs.RO↗

arXiv2025

Distance Estimation in Outdoor Driving Environments Using Phase-only Correlation Method with Event Cameras

With the growing adoption of autonomous driving, the advancement of sensor technology is crucial for ensuring safety and reliable operation. Sensor fusion techniques that combine multiple sensors such as LiDAR, radar, and cameras have proven effective, but the integration of multiple devices increases both hardware complexity and cost. Therefore, developing a single sensor capable of performing multiple roles is highly desirable for cost-efficient and scalable autonomous driving systems. Event cameras have emerged as a promising solution due to their unique characteristics, including high dynamic range, low latency, and high temporal resolution. These features enable them to perform well in challenging lighting conditions, such as low-light or backlit environments. Moreover, their ability to detect fine-grained motion events makes them suitable for applications like pedestrian detection and vehicle-to-infrastructure communication via visible light. In this study, we present a method for distance estimation using a monocular event camera and a roadside LED bar. By applying a phase-only correlation technique to the event data, we achieve sub-pixel precision in detecting the spatial shift between two light sources. This enables accurate triangulation-based distance estimation without requiring stereo vision. Field experiments conducted in outdoor driving scenarios demonstrated that the proposed approach achieves over 90% success rate with less than 0.5-meter error for distances ranging from 20 to 60 meters. Future work includes extending this method to full position estimation by leveraging infrastructure such as smart poles equipped with LEDs, enabling event-camera-based vehicles to determine their own position in real time. This advancement could significantly enhance navigation accuracy, route optimization, and integration into intelligent transportation systems.

eess.IV↗

arXiv2021

Throat effects on shadows of Kerr-like wormholes

We revisit to investigate shadows cast by Kerr-like wormholes. The boundary of the shadow is determined by unstable circular photon orbits. We find that, in certain parameter regions, the orbit is located at the throat of the Kerr-like wormhole, which was not considered in the literature. In these cases, the existence of the throat alters the shape of the shadow significantly, and makes it possible for us to differentiate it from that of a Kerr black hole.

gr-qc↗