arXiv subjects

Masatoshi Okutomi

Publications and source records attributed to Masatoshi Okutomi.

At least 55 records · Page 3Linked to original sources

arXiv2020

Spectral Reflectance Estimation Using Projector with Unknown Spectral Power Distribution

A lighting-based multispectral imaging system using an RGB camera and a projector is one of the most practical and low-cost systems to acquire multispectral observations for estimating the scene's spectral reflectance information. However, existing projector-based systems assume that the spectral power distribution (SPD) of each projector primary is known, which requires additional equipment such as a spectrometer to measure the SPD. In this paper, we present a method for jointly estimating the spectral reflectance and the SPD of each projector primary. In addition to adopting a common spectral reflectance basis model, we model the projector's SPD by a low-dimensional model using basis functions obtained by a newly collected projector's SPD database. Then, the spectral reflectances and the projector's SPDs are alternatively estimated based on the basis models. We experimentally show the performance of our joint estimation using a different number of projected illuminations and investigate the potential of the spectral reflectance estimation using a projector with unknown SPD.

eess.IV↗

arXiv2020

Deep Snapshot HDR Imaging Using Multi-Exposure Color Filter Array

In this paper, we propose a deep snapshot high dynamic range (HDR) imaging framework that can effectively reconstruct an HDR image from the RAW data captured using a multi-exposure color filter array (ME-CFA), which consists of a mosaic pattern of RGB filters with different exposure levels. To effectively learn the HDR image reconstruction network, we introduce the idea of luminance normalization that simultaneously enables effective loss computation and input data normalization by considering relative local contrasts in the "normalized-by-luminance" HDR domain. This idea makes it possible to equally handle the errors in both bright and dark areas regardless of absolute luminance levels, which significantly improves the visual image quality in a tone-mapped domain. Experimental results using two public HDR image datasets demonstrate that our framework outperforms other snapshot methods and produces high-quality HDR images with fewer visual artifacts.

cs.CV↗

arXiv2020

Adaptive Future Frame Prediction with Ensemble Network

Future frame prediction in videos is a challenging problem because videos include complicated movements and large appearance changes. Learning-based future frame prediction approaches have been proposed in kinds of literature. A common limitation of the existing learning-based approaches is a mismatch of training data and test data. In the future frame prediction task, we can obtain the ground truth data by just waiting for a few frames. It means we can update the prediction model online in the test phase. Then, we propose an adaptive update framework for the future frame prediction task. The proposed adaptive updating framework consists of a pre-trained prediction network, a continuous-updating prediction network, and a weight estimation network. We also show that our pre-trained prediction model achieves comparable performance to the existing state-of-the-art approaches. We demonstrate that our approach outperforms existing methods especially for dynamically changing scenes.

cs.CV↗

arXiv2020

Human Segmentation with Dynamic LiDAR Data

Consecutive LiDAR scans compose dynamic 3D sequences, which contain more abundant information than a single frame. Similar to the development history of image and video perception, dynamic 3D sequence perception starts to come into sight after inspiring research on static 3D data perception. This work proposes a spatio-temporal neural network for human segmentation with the dynamic LiDAR point clouds. It takes a sequence of depth images as input. It has a two-branch structure, i.e., the spatial segmentation branch and the temporal velocity estimation branch. The velocity estimation branch is designed to capture motion cues from the input sequence and then propagates them to the other branch. So that the segmentation branch segments humans according to both spatial and temporal features. These two branches are jointly learned on a generated dynamic point cloud dataset for human recognition. Our works fill in the blank of dynamic point cloud perception with the spherical representation of point cloud and achieves high accuracy. The experiments indicate that the introduction of temporal feature benefits the segmentation of dynamic point cloud.

cs.CV↗

arXiv2020

Monochrome and Color Polarization Demosaicking Using Edge-Aware Residual Interpolation

A division-of-focal-plane or microgrid image polarimeter enables us to acquire a set of polarization images in one shot. Since the polarimeter consists of an image sensor equipped with a monochrome or color polarization filter array (MPFA or CPFA), the demosaicking process to interpolate missing pixel values plays a crucial role in obtaining high-quality polarization images. In this paper, we propose a novel MPFA demosaicking method based on edge-aware residual interpolation (EARI) and also extend it to CPFA demosaicking. The key of EARI is a new edge detector for generating an effective guide image used to interpolate the missing pixel values. We also present a newly constructed full color-polarization image dataset captured using a 3-CCD camera and a rotating polarizer. Using the dataset, we experimentally demonstrate that our EARI-based method outperforms existing methods in MPFA and CPFA demosaicking.

eess.IV↗

arXiv2020

Polarimetric Multi-View Inverse Rendering

A polarization camera has great potential for 3D reconstruction since the angle of polarization (AoP) of reflected light is related to an object's surface normal. In this paper, we propose a novel 3D reconstruction method called Polarimetric Multi-View Inverse Rendering (Polarimetric MVIR) that effectively exploits geometric, photometric, and polarimetric cues extracted from input multi-view color polarization images. We first estimate camera poses and an initial 3D model by geometric reconstruction with a standard structure-from-motion and multi-view stereo pipeline. We then refine the initial model by optimizing photometric and polarimetric rendering errors using multi-view RGB and AoP images, where we propose a novel polarimetric rendering cost function that enables us to effectively constrain each estimated surface vertex's normal while considering four possible ambiguous azimuth angles revealed from the AoP measurement. Experimental results using both synthetic and real data demonstrate that our Polarimetric MVIR can reconstruct a detailed 3D shape without assuming a specific polarized reflection depending on the material.

cs.CV↗

arXiv2020

3D Pipe Network Reconstruction Based on Structure from Motion with Incremental Conic Shape Detection and Cylindrical Constraint

Pipe inspection is a critical task for many industries and infrastructure of a city. The 3D information of a pipe can be used for revealing the deformation of the pipe surface and position of the camera during the inspection. In this paper, we propose a 3D pipe reconstruction system using sequential images captured by a monocular endoscopic camera. Our work extends a state-of-the-art incremental Structure-from-Motion (SfM) method to incorporate prior constraints given by the target shape into bundle adjustment (BA). Using this constraint, we can minimize the scale-drift that is the general problem in SfM. Moreover, our method can reconstruct a pipe network composed of multiple parts including straight pipes, elbows, and tees. In the experiments, we show that the proposed system enables more accurate and robust pipe mapping from a monocular camera in comparison with existing state-of-the-art methods.

cs.CV↗

arXiv2020

Classifying degraded images over various levels of degradation

Classification for degraded images having various levels of degradation is very important in practical applications. This paper proposes a convolutional neural network to classify degraded images by using a restoration network and an ensemble learning. The results demonstrate that the proposed network can classify degraded images over various levels of degradation well. This paper also reveals how the image-quality of training data for a classification network affects the classification performance of degraded images.

cs.CV↗

arXiv2020

Stomach 3D Reconstruction Based on Virtual Chromoendoscopic Image Generation

Gastric endoscopy is a standard clinical process that enables medical practitioners to diagnose various lesions inside a patient's stomach. If any lesion is found, it is very important to perceive the location of the lesion relative to the global view of the stomach. Our previous research showed that this could be addressed by reconstructing the whole stomach shape from chromoendoscopic images using a structure-from-motion (SfM) pipeline, in which indigo carmine (IC) blue dye sprayed images were used to increase feature matches for SfM by enhancing stomach surface's textures. However, spraying the IC dye to the whole stomach requires additional time, labor, and cost, which is not desirable for patients and practitioners. In this paper, we propose an alternative way to achieve whole stomach 3D reconstruction without the need of the IC dye by generating virtual IC-sprayed (VIC) images based on image-to-image style translation trained on unpaired real no-IC and IC-sprayed images. We have specifically investigated the effect of input and output color channel selection for generating the VIC images and found that translating no-IC green-channel images to IC-sprayed red-channel images gives the best SfM reconstruction result.

cs.CV↗

arXiv2020

Learning-Based Human Segmentation and Velocity Estimation Using Automatic Labeled LiDAR Sequence for Training

In this paper, we propose an automatic labeled sequential data generation pipeline for human segmentation and velocity estimation with point clouds. Considering the impact of deep neural networks, state-of-the-art network architectures have been proposed for human recognition using point clouds captured by Light Detection and Ranging (LiDAR). However, one disadvantage is that legacy datasets may only cover the image domain without providing important label information and this limitation has disturbed the progress of research to date. Therefore, we develop an automatic labeled sequential data generation pipeline, in which we can control any parameter or data generation environment with pixel-wise and per-frame ground truth segmentation and pixel-wise velocity information for human recognition. Our approach uses a precise human model and reproduces a precise motion to generate realistic artificial data. We present more than 7K video sequences which consist of 32 frames generated by the proposed pipeline. With the proposed sequence generator, we confirm that human segmentation performance is improved when using the video domain compared to when using the image domain. We also evaluate our data by comparing with data generated under different conditions. In addition, we estimate pedestrian velocity with LiDAR by only utilizing data generated by the proposed pipeline.

cs.CV↗

arXiv2019

Is This The Right Place? Geometric-Semantic Pose Verification for Indoor Visual Localization

Visual localization in large and complex indoor scenes, dominated by weakly textured rooms and repeating geometric patterns, is a challenging problem with high practical relevance for applications such as Augmented Reality and robotics. To handle the ambiguities arising in this scenario, a common strategy is, first, to generate multiple estimates for the camera pose from which a given query image was taken. The pose with the largest geometric consistency with the query image, e.g., in the form of an inlier count, is then selected in a second stage. While a significant amount of research has concentrated on the first stage, there is considerably less work on the second stage. In this paper, we thus focus on pose verification. We show that combining different modalities, namely appearance, geometry, and semantics, considerably boosts pose verification and consequently pose accuracy. We develop multiple hand-crafted as well as a trainable approach to join into the geometric-semantic verification and show significant improvements over state-of-the-art on a very challenging indoor dataset.

cs.CV↗

arXiv2019

Pro-Cam SSfM: Projector-Camera System for Structure and Spectral Reflectance from Motion

In this paper, we propose a novel projector-camera system for practical and low-cost acquisition of a dense object 3D model with the spectral reflectance property. In our system, we use a standard RGB camera and leverage an off-the-shelf projector as active illumination for both the 3D reconstruction and the spectral reflectance estimation. We first reconstruct the 3D points while estimating the poses of the camera and the projector, which are alternately moved around the object, by combining multi-view structured light and structure-from-motion (SfM) techniques. We then exploit the projector for multispectral imaging and estimate the spectral reflectance of each 3D point based on a novel spectral reflectance estimation model considering the geometric relationship between the reconstructed 3D points and the estimated projector positions. Experimental results on several real objects demonstrate that our system can precisely acquire a dense 3D model with the full spectral reflectance property using off-the-shelf devices.

cs.CV↗

arXiv2019

3D Reconstruction of Whole Stomach from Endoscope Video Using Structure-from-Motion

Gastric endoscopy is a common clinical practice that enables medical doctors to diagnose the stomach inside a body. In order to identify a gastric lesion's location such as early gastric cancer within the stomach, this work addressed to reconstruct the 3D shape of a whole stomach with color texture information generated from a standard monocular endoscope video. Previous works have tried to reconstruct the 3D structures of various organs from endoscope images. However, they are mainly focused on a partial surface. In this work, we investigated how to enable structure-from-motion (SfM) to reconstruct the whole shape of a stomach from a standard endoscope video. We specifically investigated the combined effect of chromo-endoscopy and color channel selection on SfM. Our study found that 3D reconstruction of the whole stomach can be achieved by using red channel images captured under chromo-endoscopy by spreading indigo carmine (IC) dye on the stomach surface.

cs.CV↗

arXiv2019

Improving Transparency of Deep Neural Inference Process

Deep learning techniques are rapidly advanced recently, and becoming a necessity component for widespread systems. However, the inference process of deep learning is black-box, and not very suitable to safety-critical systems which must exhibit high transparency. In this paper, to address this black-box limitation, we develop a simple analysis method which consists of 1) structural feature analysis: lists of the features contributing to inference process, 2) linguistic feature analysis: lists of the natural language labels describing the visual attributes for each feature contributing to inference process, and 3) consistency analysis: measuring consistency among input data, inference (label), and the result of our structural and linguistic feature analysis. Our analysis is simplified to reflect the actual inference process for high transparency, whereas it does not include any additional black-box mechanisms such as LSTM for highly human readable results. We conduct experiments and discuss the results of our analysis qualitatively and quantitatively, and come to believe that our work improves the transparency of neural networks. Evaluated through 12,800 human tasks, 75% workers answer that input data and result of our feature analysis are consistent, and 70% workers answer that inference (label) and result of our feature analysis are consistent. In addition to the evaluation of the proposed analysis, we find that our analysis also provide suggestions, or possible next actions such as expanding neural network complexity or collecting training data to improve a neural network.

cs.LG↗

arXiv2019

Automatic Labeled LiDAR Data Generation based on Precise Human Model

Following improvements in deep neural networks, state-of-the-art networks have been proposed for human recognition using point clouds captured by LiDAR. However, the performance of these networks strongly depends on the training data. An issue with collecting training data is labeling. Labeling by humans is necessary to obtain the ground truth label; however, labeling requires huge costs. Therefore, we propose an automatic labeled data generation pipeline, for which we can change any parameters or data generation environments. Our approach uses a human model named Dhaiba and a background of Miraikan and consequently generated realistic artificial data. We present 500k+ data generated by the proposed pipeline. This paper also describes the specification of the pipeline and data details with evaluations of various approaches.

cs.CV↗

arXiv2018

Estimation and Restoration of Compositional Degradation Using Convolutional Neural Networks

Image restoration from a single image degradation type, such as blurring, hazing, random noise, and compression has been investigated for decades. However, image degradations in practice are often a mixture of several types of degradation. Such compositional degradations complicate restoration because they require the differentiation of different degradation types and levels. In this paper, we propose a convolutional neural network (CNN) model for estimating the degradation properties of a given degraded image. Furthermore, we introduce an image restoration CNN model that adopts the estimated degradation properties as its input. Experimental results show that the proposed degradation estimation model can successfully infer the degradation properties of compositionally degraded images. The proposed restoration model can restore degraded images by exploiting the estimated degradation properties and can achieve both blind and nonblind image restorations.

cs.CV↗

arXiv2018

Gradient-Based Low-Light Image Enhancement

A low-light image enhancement is a highly demanded image processing technique, especially for consumer digital cameras and cameras on mobile phones. In this paper, a gradient-based low-light image enhancement algorithm is proposed. The key is to enhance the gradients of dark region, because the gradients are more sensitive for human visual system than absolute values. In addition, we involve the intensity-range constraints for the image integration. By using the intensity-range constraints, we can integrate the output image with enhanced gradients preserving the given gradient information while enforcing the intensity range of the output image within a certain intensity range. Experiments demonstrate that the proposed gradient-based low-light image enhancement can effectively enhance the low-light images.

cs.CV↗

arXiv2018

Non-blind Image Restoration Based on Convolutional Neural Network

Blind image restoration processors based on convolutional neural network (CNN) are intensively researched because of their high performance. However, they are too sensitive to the perturbation of the degradation model. They easily fail to restore the image whose degradation model is slightly different from the trained degradation model. In this paper, we propose a non-blind CNN-based image restoration processor, aiming to be robust against a perturbation of the degradation model compared to the blind restoration processor. Experimental comparisons demonstrate that the proposed non-blind CNN-based image restoration processor can robustly restore images compared to existing blind CNN-based image restoration processors.

cs.CV↗