arXiv subjects

Massimiliano Rossi

Publications and source records attributed to Massimiliano Rossi.

50 records · Page 3Linked to original sources

arXiv2018

Solutal Marangoni flow as the cause of ring stains from drying salty colloidal drops

Evaporating salty droplets are ubiquitous in nature, in our home and in the laboratory. Interestingly, the transport processes in such apparently simple systems differ strongly from evaporating "freshwater" droplets since convection is partly inverted due to Marangoni stresses. Such an effect has crucial consequences to the salt crystallization process and to the deposits left behind. In this work we show unprecedented measurements that, not only confirm clearly the patterns of the flow inversion, but also elucidate their impact on the distribution of non-volatile solutes. Contrary to what has been often reported in the literature, such a flow reversal does not prevent the formation of ring-shaped stains: particles accumulate at the contact line driven solely by the interfacial flow. We can therefore conclude that the classical "coffee-stain effect" is not the only mechanism that can generate ring-shaped stains in evaporating droplets.

physics.flu-dyn↗

arXiv2018

Measurement-based quantum control of mechanical motion

Controlling a quantum system based on the observation of its dynamics is inevitably complicated by the backaction of the measurement process. Efficient measurements, however, maximize the amount of information gained per disturbance incurred. Real-time feedback then enables both canceling the measurement's backaction and controlling the evolution of the quantum state. While such measurement-based quantum control has been demonstrated in the clean settings of cavity and circuit quantum electrodynamics, its application to motional degrees of freedom has remained elusive. Here we show measurement-based quantum control of the motion of a millimetre-sized membrane resonator. An optomechanical transducer resolves the zero-point motion of the soft-clamped resonator in a fraction of its millisecond coherence time, with an overall measurement efficiency close to unity. We use this position record to feedback-cool a resonator mode to its quantum ground state (residual thermal occupation n = 0.29 +- 0.03), 9 dB below the quantum backaction limit of sideband cooling, and six orders of magnitude below the equilibrium occupation of its thermal environment. This realizes a long-standing goal in the field, and adds position and momentum to the degrees of freedom amenable to measurement-based quantum control, with potential applications in quantum information processing and gravitational wave detectors.

quant-ph↗

arXiv2018

Cavity optomechanics with feedback--controlled in--loop light

It has recently been shown [Rossi et al., Phys. Rev. Lett. 119, 123603 (2017); ibid. 120, 073601 (2018)] that feedback--controlled in--loop light can be used to enhance the efficiency of optomechanical systems. We analyse the theoretical ground at the basis of this approach and explore its potentialities and limitations. We discuss the validity of the model, analyse the properties of in-loop cavities and we show how they can be used to observe coherent optomechanical oscillations also with weakly coupled system, improve the sideband cooling performance, and increase ponderomotive squeezing.

quant-ph↗

arXiv2018

Bubble-Flip -- A New Generation Algorithm for Prefix Normal Words

We present a new recursive generation algorithm for prefix normal words. These are binary strings with the property that no substring has more 1s than the prefix of the same length. The new algorithm uses two operations on binary strings, which exploit certain properties of prefix normal words in a smart way. We introduce infinite prefix normal words and show that one of the operations used by the algorithm, if applied repeatedly to extend the string, produces an ultimately periodic infinite word, which is prefix normal. Moreover, based on the original finite word, we can predict both the length and the density of an ultimate period of this infinite word.

cs.DS↗

arXiv2018

On the Multi-Interval Ulam-Rényi Game: for 3 lies 4 intervals suffice

We study the problem of identifying an initially unknown $m$-bit number by using yes-no questions when up to a fixed number $e$ of the answers can be erroneous. In the variant we consider here questions are restricted to be the union of up to a fixed number of intervals. For any $e \geq 1$ let $k_e$ be the minimum $k$ such that for all sufficiently large $m$, there exists a strategy matching the information theoretic lower bound and only using $k$-interval questions. It is known that $k_e = O(e^2)$. However, it has been conjectured that the $k_e = Θ(e).$ This linearity conjecture is supported by the known results for small values of $e$. For $e\leq2$ we have $k_e = e.$ We extend these results to the case $e=3$. We show $k_3 \leq 4$ improving upon the previously known bound $k_3 \leq 10.$

math.CO↗

arXiv2018

Normal--mode splitting in a weakly coupled optomechanical system

Normal--mode splitting is the most evident signature of strong coupling between two interacting subsystems. It occurs when two subsystems exchange energy between themselves faster than they dissipate it to the environment. Here we experimentally show that a weakly coupled optomechanical system at room temperature can manifest normal--mode splitting when the pump field fluctuations are anti-squashed by a phase-sensitive feedback loop operating close to its instability threshold. Under these conditions the optical cavity exhibits an effectively reduced decay rate, so that the system is effectively promoted to the strong coupling regime.

quant-ph↗

arXiv2017

Clogging in constricted suspension flows

The flow of a charged-stabilized suspension through a single constricted channel is studied experimentally by tracking the particles individually. Surprisingly, the behavior is found to be qualitatively similar to that of inertial dry granular systems: For small values of the neck-to-particle size ratio (D/d<3), clogs form randomly as arches of particle span the constriction. The statistics of the clogging events are Poissonian as reported for granular systems and agree, for moderate particle volume fraction ($ϕ\approx20\%$), with a simple stochastic model for the number of particles at the neck. For larger neck sizes (D/d>3), even at the largest $ϕ$ ($\approx60\%$) achievable in the experiments, an uninterrupted particle flow is observed, which resembles that of an hourglass. This particularly small value of D/d at the transition to a practically uninterrupted flow is attributed to the low effective friction between the particles, achieved by the particle's functionalization and lubrication.

physics.flu-dyn↗

arXiv2017

Enhancing sideband cooling by feedback--controlled light

We realise a phase-sensitive closed-loop control scheme to engineer the fluctuations of the pump field which drives an optomechanical system, and show that the corresponding cooling dynamics can be significantly improved. In particular, operating in the counter-intuitive "anti-squashing" regime of positive feedback and increased field fluctuations, sideband cooling of a nanomechanical membrane within an optical cavity can be improved by 7.5~dB with respect to the case without feedback. Close to the quantum regime of reduced thermal noise, such feedback-controlled light would allow going well below the quantum backaction cooling limit.

quant-ph↗

arXiv2017

Enhancement of three-mode optomechanical interaction by feedback-controlled light

We realise a feedback-controlled optical Fabry-Perot cavity in which the transmitted cavity output is used to modulate the input amplitude fluctuations. The resulting phase-dependent fluctuations of the in-loop optical field, which may be either sub-shot- or super-shot-noise, can be engineered to favorably affect the optomechanical interaction with a nanomechanical membrane placed within the cavity. Here we show that in the super-shot-noise regime ("anti-squashed light") the in-loop field has a strongly reduced effective cavity linewidth, corresponding to an increased optomechanical cooperativity. In this regime feedback improves the simultaneous resolved sideband cooling of two nearly degenerate membrane mechanical modes by one order of magnitude.

quant-ph↗

arXiv2015

Growth control of sessile microbubbles in PDMS devices

In a microfluidic environment, the presence of bubbles is often detrimental to the functionality of the device, leading to clogging or cavitation, but microbubbles can also be an indispensable asset in other applications such as microstreaming. In either case, it is crucial to understand and control the growth or shrinkage of these bodies of air, in particular in common soft-lithography devices based on polydimethylsiloxane (PDMS), which is highly permeable to gases. In this work, we study the gas transport into and out of a bubble positioned in a microfluidic device, taking into account the direct gas exchange through PDMS as well as the transport of gas through the liquid in the device. Hydrostatic pressure regulation allows for the quantitative control of growth, shrinkage, or the attainment of a stable equilibrium bubble size. We find that the vapor pressure of the liquid plays an important role for the balance of gas transport, accounting for variability in experimental conditions and suggesting additional means of bubble size control in applications.

physics.flu-dyn↗

arXiv2015

Surfactant-driven flow transitions in evaporating droplets

An evaporating droplet is a dynamic system in which flow is spontaneously generated to minimize the surface energy, dragging particles to the borders and ultimately resulting in the so-called "coffee-stain effect". The situation becomes more complex at the droplet's surface, where surface tension gradients of different nature can compete with each other yielding different scenarios. With careful experiments and with the aid of 3D particle tracking techniques, we are able to show that different types of surfactants turn the droplet's surface either rigid or elastic, which alters the evaporating fluid flow, either enhancing the classical coffee-stain effect or leading to a total flow inversion. Our measurements lead to unprecedented and detailed measurements of the surface tension difference along an evaporating droplet's surface with good temporal and spatial resolution.

physics.flu-dyn↗

arXiv2015

Three-dimensional phenomena in microbubble acoustic streaming

Ultrasound-driven oscillating micro-bubbles have been used as active actuators in microfluidic devices to perform manifold tasks such as mixing, sorting and manipulation of microparticles. A common configuration consists on side-bubbles, created by trapping air pockets in blind channels perpendicular to the main channel direction. This configuration consists of acoustically excited bubbles with a semi-cylindrical shape that generate significant streaming flow. Due to the geometry of the channels, such flows have been generally considered as quasi two-dimensional. Similar assumptions are often made in many other microfluidic systems based on \emph{flat} micro-channels. However, in this paper we show that microparticle trajectories actually present a much richer behavior, with particularly strong out-of-plane dynamics in regions close to the microbubble interface. Using Astigmatism Particle Tracking Velocimetry, we reveal that the apparent planar streamlines are actually projections of a \emph{streamsurface} with a pseudo-toroidal shape. We therefore show that acoustic streaming cannot generally be assumed as a two-dimensional phenomenon in confined systems. The results have crucial consequences for most of the applications involving acoustic streaming as particle trapping, sorting and mixing.

physics.flu-dyn↗

arXiv2013

Ultrasound-induced acoustophoretic motion of microparticles in three dimensions

We derive analytical expressions for the three-dimensional (3D) acoustophoretic motion of spherical microparticles in rectangular microchannels. The motion is generated by the acoustic radiation force and the acoustic streaming-induced drag force. In contrast to the classical theory of Rayleigh streaming in shallow, infinite, parallel-plate channels, our theory does include the effect of the microchannel side walls. The resulting predictions agree well with numerics and experimental measurements of the acoustophoretic motion of polystyrene spheres with nominal diameters of 0.537 um and 5.33 um. The 3D particle motion was recorded using astigmatism particle tracking velocimetry under controlled thermal and acoustic conditions in a long, straight, rectangular microchannel actuated in one of its transverse standing ultrasound-wave resonance modes with one or two half-wavelengths. The acoustic energy density is calibrated in situ based on measurements of the radiation dominated motion of large 5-um-diam particles, allowing for quantitative comparison between theoretical predictions and measurements of the streaming induced motion of small 0.5-um-diam particles.

physics.flu-dyn↗

arXiv2012

Diving with microparticles in acoustic fields

Sound can move particles. A good example of this phenomenon is the Chladni plate, in which an acoustic wave is induced in a metallic plate and particles migrate to the nodes of the acoustic wave. For several years, acoustophoresis has been used to manipulate microparticles in microscopic scales. In this fluid dynamics video, submitted to the 30th Annual Gallery of Fluid Motion, we show the basic mechanism of the technique and a simple way of visualize it. Since acoustophoretic phenomena is essentially a three-dimensional effect, we employ a simple technique to visualize the particles in 3D. The technique is called Astigmatism Particle Tracking Velocimetry and it consists in the use of cylindrical lenses to induce a deformation in the particle shape, which will be then correlated with its distance from the observer. With this method we are able to dive with the particles and observe in detail particle motion that would otherwise be missed. The technique not only permits visualization but also precise quantitative measurements that can be compared with theory and simulations.

physics.flu-dyn↗