arXiv subjects

Mathieu Bertrand

Publications and source records attributed to Mathieu Bertrand.

24 records · Page 2Linked to original sources

arXiv2022

Synchronization of frequency combs by optical injection

Optical frequency combs based on semiconductor lasers are a promising technology for monolithic integration of dual-comb spectrometers. However, the stabilization of the offset frequency fceo remains a challenging feat due the lack of octave-spanning spectra. In a dual-comb configuration, the uncorrelated jitter of the offset frequencies leads to a non-periodic signal resulting in broadened beatnotes with a limited signal-to-noise ratio (SNR). Hence, expensive data acquisition schemes and complex signal processing are currently required. Here, we show that the offset frequencies of two frequency combs can be synchronized by optical injection locking, which allows full phase-stabilization when combined with electrical injection. A single comb line isolated via an optical Vernier filter serves as Master oscillator for injection locking. The resulting dual-comb signal is periodic and stable over thousands of periods. This enables coherent averaging using analog electronics, which increases the SNR and reduces the data size by one and three orders of magnitude, respectively. The presented method will enable fully phase-stabilized dual-comb spectrometers by leveraging on integrated optical filters and provides access for measuring and stabilizing fceo.

physics.optics↗

arXiv2021

Femtosecond pulses from a mid-infrared quantum cascade laser

The quantum cascade laser (QCL) has evolved to be a compact, powerful source of coherent mid-infrared (mid-IR) light. However, its fast gain dynamics strongly restricts the formation of ultrashort pulses. As such, the shortest pulses reported so far were limited to a few picoseconds with some hundreds of milliwatts of peak power, strongly narrowing their applicability for time-resolved and nonlinear experiments. Here, we demonstrate an alternative approach capable of producing near-transform-limited sub-picosecond pulses with several watts of peak power. Starting from a frequency modulated phase-locked state, which most efficiently exploits the gain of the active region, ultrashort high peak power pulses are generated via external pulse compression. We assess their temporal nature by means of a novel optical sampling method, coherent beat note interferometry and interferometric autocorrelation. These results open new pathways for nonlinear physics in the mid-infrared.

physics.optics↗

arXiv2021

Controlling Quantum Cascade Laser Optical Frequency Combs through Microwave Injection

In this work, control over the precise state emitted by quantum cascade laser frequency combs through strong radio-frequency current modulation close to their repetition frequency is demonstrated. In particular, broadening of the spectrum from about 20 cm$^{-1}$ to 60cm$^{-1}$ can be achieved throughout most of the current dynamical range while preserving the coherence, as measured by shifted wave interference Fourier transform spectroscopy (SWIFTS). The required modulation frequency to achieve this broadening is red-shifted compared to the free-running beatnote frequency at increasing modulation powers starting from 25 dBm, whereas the range where it occurs narrows. Outside of this maximum-bandwidth range, the spectral bandwidth of the laser output is gradually reduced and the new center frequency is red- or blue-shifted, directly dependent on the detuning of the modulation frequency. By switching between two modulation frequencies detuned symmetrically with respect to the free-running beatnote, we can generate two multiplexed spectral regions with negligible overlap from the same device at rates of at least 20 kHz. In the time-domain we show with both SWIFTS and interferometric autocorrelation (IAC) measurements a transition from quasi-continuous output to pulsed ($τ_p \approx 55$ ps) output by ramping up the injection power to 35 dBm.

physics.optics↗

arXiv2021

SI-traceable frequency dissemination at 1572.06 nm in a stabilized fiber network with ring topology

Frequency dissemination in phase-stabilized optical fiber networks for metrological frequency comparisons and precision measurements are promising candidates to overcome the limitations imposed by satellite techniques. However, network constraints restrict the availability of dedicated channels in the commonly-used C-band. Here, we demonstrate the dissemination of an SI-traceable ultrastable optical frequency in the L-band over a 456 km fiber network with ring topology, in which telecommunication data traffic occupies the full C-band. We characterize the optical phase noise and evaluate a link instability of $4.7\cdot 10^{-16}$ at 1 s and $3.8\cdot 10^{-19}$ at 2000 s integration time, and a link accuracy of $2\cdot 10^{-18}$, which is comparable to existing metrology networks in the C-band. We demonstrate the application of the disseminated frequency by establishing the SI-traceability of a laser in a remote laboratory. Finally, we show that our metrological frequency does not interfere with data traffic in the telecommunication channels. Our approach combines an unconventional spectral choice in the telecommunication L-band with established frequency-stabilization techniques, providing a novel, cost-effective solution for ultrastable frequency-comparison and dissemination, and may contribute to a foundation of a world-wide metrological network.

physics.ins-det↗

arXiv2020

Reduced lasing thresholds in GeSn microdisk cavities with defect management of the optically active region

GeSn alloys are nowadays considered as the most promising materials to build Group IV laser sources on silicon (Si) in a full complementary metal oxide semiconductor-compatible approach. Recent GeSn laser developments rely on increasing the band structure directness, by increasing the Sn content in thick GeSn layers grown on germanium (Ge) virtual substrates (VS) on Si. These lasers nonetheless suffer from a lack of defect management and from high threshold densities. In this work we examine the lasing characteristics of GeSn alloys with Sn contents ranging from 7 \% to 10.5 \%. The GeSn layers were patterned into suspended microdisk cavities with different diameters in the 4-\SI{8 }{\micro\meter} range. We evidence direct band gap in GeSn with 7 \% of Sn and lasing at 2-\SI{2.3 }{\micro\meter} wavelength under optical injection with reproducible lasing thresholds around \SI{10 }{\kilo\watt\per\square\centi\meter}, lower by one order of magnitude as compared to the literature. These results were obtained after the removal of the dense array of misfit dislocations in the active region of the GeSn microdisk cavities. The results offer new perspectives for future designs of GeSn-based laser sources.

physics.optics↗

arXiv2020

Mid-infrared quantum cascade laser frequency combs with a microstrip-like line waveguide geometry

In this work, a design for a mid-infrared quantum cascade laser (QCL) frequency comb source that enhances the high frequency response and the comb characteristics of the device is presented . A state-of-the-art active region (AR), grown on a heavily n-doped InP:Si substrate, was processed into a buried heterostructure with a microstrip-like line waveguide. As a result, the repetition rate frequency $f_{rep}$, around 11.09 GHz, can be locked to an injected narrow-linewidth radio frequency (RF) signal, over a range of more than 200 kHz with -10 dBm of injected power, which outperforms normal buried heterostructure schemes by an order of magnitude. Moreover, under RF injection at powers higher than 20 dBm, the lasing spectrum is flattened and significantly broadened, from 24 $cm^{-1}$ to 65 $cm^{-1}$ in bandwidth, while at the same time the coherence of the comb is maintained and verified.

physics.optics↗