arXiv subjects

Mathieu Renouf

Publications and source records attributed to Mathieu Renouf.

13 recordsLinked to original sources

arXiv2026

Origin of geometric cohesion in non-convex granular materials: interplay between interdigitation and rotational constraints enhancing frictional stability

We present a series of experiments investigating the local microstructure of cylindrical piles composed of highly concave particles. By systematically varying particle geometry -- from spheres to strongly non-convex polypods -- as well as frictional properties and the number of branches, we explore how these parameters, together with the preparation protocol, shape the internal structure of the system. Using X-ray tomography combined with a dedicated image-analysis pipeline, we accurately extract the position, orientation, and contacts of every particle in each pile. This allows us to quantify the evolution of key structural observables as a function of particle geometry and preparation method. In particular, we measure the distributions of local packing fraction, coordination number, number of neighbors, and contact locations, along with particle-particle positional and orientational correlations. More importantly, we construct a new stability indicator that correlates perfectly with the observed pile stabilities, enabling us to identify the fundamental mechanisms responsible for \textit{geometrically induced cohesion} in granular systems composed of non-interlocking particle shapes: interdigitation, rotational constraint, friction-mediated cohesion, and the ability of a pile to re-stabilize.

cond-mat.soft↗

arXiv2024

Experimental exploration of geometric cohesion and solid fraction in columns of highly non-convex Platonic polypods

In this study, we investigate the stability and solid fraction of columns comprised of highly non-convex particles. These particles are constructed by extruding arms onto the faces of Platonic solids, a configuration we term \emph{Platonic polypods}. We explore the emergence and disappearance of solid-like behavior in the absence of adhesive forces between the particles, referred to as \emph{geometric cohesion}. This investigation is conducted by varying the number of arms of the particles and the thickness of these arms. To accomplish this, columns are assembled by depositing particles within a cylindrical container, followed by the removal of the container to evaluate the stability of the resulting structures. Experiments were carried out using three distinct materials to assess the influence of the friction coefficient between the grains. Our findings reveal that certain granular systems exhibit geometric cohesion, depending on their geometrical and contact properties. Furthermore, we analyze the initial solid fraction of the columns, demonstrating that these arrangements can achieve stability even at highly loose states, which contrasts with traditional granular materials.

cond-mat.soft↗

arXiv2024

Steady Granular Flow in a Rotating Drum: Universal description of stress, velocity and packing fraction profiles covering grain shape effects from convex to very concave

The flow behavior of granular matter is significantly influenced by the shape of constituent particles. This effect is particularly pronounced for very concave particles, which exhibit unique flow characteristics such as higher porosity and sharper phase transitions between jamming and unjamming states. Despite the richness and ubiquitousness of these systems, our understanding of their intricate flow behavior and the local mechanisms driving these behaviors remains incomplete. In this work, we investigate the effect of particle shape, ranging from spherical to highly concave, on steady flows in a rotating drum - a system that facilitates a continuous phase transition from a jamming state at greater depths to an unjamming state at shallower regions. We develop an analytical model to elucidate granular behavior within the rotating drum: (i) Firstly, by decomposing the shear stress, we reconcile the discrepancy between simulation data and theoretical predictions, establishing a relationship with the angle of repose. (ii)Secondly, we extend the generalized Bagnold scaling , coupled with a non-local fluidity relation based on packing fraction, providing a framework for a correlation between shear stress, shear rate, and packing fraction. Additionally, we introduce a characteristic length to quantify the influence of particle shape and drum speed. This analytical model offers explicit functional forms for physical quantity profiles, which are validated experimentally in a thin rotating drum and numerically in a two-dimensional rotating drum. Our results demonstrate that this model accurately describes the change of velocity due to the phase transition of granular flow within a rotating drum. Moreover, for different shapes of particle and drum speeds, the characteristic length captures the interplay between shear stress, shear rate, and the variation of packing fraction.

cond-mat.soft↗

arXiv2023

Compacting an assembly of soft balls far beyond the jammed state: insights from 3D imaging

Very soft grain assemblies have unique shape-changing capabilities that allow them to be compressed far beyond the rigid jammed state by filling void spaces more effectively. However, accurately following the formation of these systems by monitoring the creation of new contacts, the changes in grain shape, and measuring grain-scale stresses is challenging. We developed an experimental method overtaking these challenges and connecting their microscale behavior to their macroscopic response. By tracking the local strain energy during compression, we reveal a transition from granular-like to continuous-like material. Mean contact geometry is shown to vary linearly with the packing fraction, which is supported by a mean field approximation. We also validate a theoretical framework which describes the compaction from a local view. Our experimental framework provides insights into the granular micro-mechanisms and opens new perspectives for rheological analysis of highly deformable grain assemblies in various fields ranging from biology to engineering.

cond-mat.soft↗

arXiv2022

Softer than soft: diving into squishy granular matter

Softer than soft, squishy granular matter is composed of grains capable of significantly changing their shape (typically larger than 10% of deformation) without tearing or breaking. Because of the difficulty to test these materials experimentally and numerically, such a family of discrete systems remains largely ignored in the granular matter physics field despite being commonly found in nature and industry. Either from a numerical, experimental, or analytical point of view, the study of highly deformable granular matter involves several challenges covering, for instance: ($i$) the need to include a large diversity of grain rheology, ($ii$) the need to consider \dc{large material} deformations, and ($iii$) the analysis upon the effects the large body distortion has on the global scale. In this article, we propose a thorough definition of these squishy granular systems, and we summarize the upcoming challenges in their study.

cond-mat.soft↗

arXiv2021

Experimental validation of a micromechanically-based compaction law for soft/hard grain mixtures

In this letter, we report on an experimental study which analyzes the compressive behavior of 2D bidisperse granular assemblies made of soft (hyperelastic) and hard grains in varying proportions ($\kappa$). By means of a recently developed uniaxial compression set-up \cite{vu2019_pre} and using advanced Digital Image Correlation (DIC) method, we follow, beyond the jamming point, the evolution of the main mechanical observables, from the global scale down to the strain field inside each deformable grain. First, we experimentally validate and extend to the uni-axial case a recently proposed micro-mechanical compaction model linking the evolution of the applied pressure $P$ to the packing fraction $\phi$ \cite{cantor2020_prl}. Second, we reveal two different linear regimes depending on whether the system is above or below a cross-over strain unraveling a transition from a discrete to a continuous-like system. Third, the evolution of these linear laws are found to vary linearly with $\kappa$, up to a saturation point around $\kappa=80$\% of hard particles. These results provide a comprehensive experimental and theoretical framework that can now be extended to a more general class of polydisperse soft granular systems.

cond-mat.soft↗

arXiv2021

Three-dimensional compaction of soft granular packings

This paper analyzes the compaction behavior of assemblies composed of soft (elastic) spherical particles beyond the jammed state, using three-dimensional non-smooth contact dynamic simulations. The assemblies of particles are characterized using the evolution of the packing fraction, the coordination number, and the von Misses stress distribution within the particles as the confining stress increases. The packing fraction increases and tends toward a maximum value close to $1$, and the mean coordination number increases as a square root of the packing fraction. As the confining stress increases, a transition is observed from a granular-like material with exponential tails of the shear stress distributions to a continuous-like material characterized by Gaussian-like distributions of the shear stresses. We develop an equation that describes the evolution of the packing fraction as a function of the applied pressure. This equation, based on the micromechanical expression of the granular stress tensor, the limit of the Hertz contact law for small deformation, and the power-law relation between the packing fraction and the coordination of the particles, provides good predictions from the jamming point up to very high densities without the need of tuning any parameters.

cond-mat.soft↗

arXiv2021

Bulk modulus of soft particle assemblies under compression

Using a numerical approach based on the coupling of the discrete and finite element methods, we explore the variation of the bulk modulus K of soft particle assemblies undergoing isotropic compression. As the assemblies densify under pressure-controlled boundary conditions, we show that the non-linearities of K rapidly deviate from predictions standing on a small-strain framework or the Equivalent Medium Theory (EMT). Using the granular stress tensor and extracting the bulk properties of single representative grains under compression, we propose a model to predict the evolution of K as a function of the sample's solid fraction and a reference state as the applied pressure P tends to zero. The model closely reproduces the trends observed in our numerical experiments confirming the behavior scalability of soft particle assemblies from the individual particle scale. Finally, we present the effect of the interparticle friction on K's evolution and how our model easily adapts to such a mechanical constraint.

cond-mat.soft↗

arXiv2021

Highly strained mixtures of bidimensional soft and rigid grains: an experimental approach from the local scale

Granular systems are not always homogeneous and can be composed of grains with very different mechanical properties. To improve our understanding of the behavior of real granular systems, in this experimental study, we compress 2D bidisperse systems made of both soft and rigid grains. By means of a recently developed experimental set-up, \md{from the measurement of the displacement field we can} follow all the mechanical observables of this granular medium from the inside of each particle up-to-the whole system scale. We \md{are able to} detect the jamming transition from these observables and study their evolution deep in the jammed state for packing fractions as high as $0.915$. We show the uniqueness of the behavior of such a system, \md{in which way} it is similar to purely soft or rigid systems and how it is different from them. This study constitutes the first step toward a better understanding of the mechanical behavior of granular materials that are polydisperse in terms of grain rheology.

cond-mat.soft↗

arXiv2020

Micromechanical description of the compaction of soft pentagon assemblies

We analyze the isotropic compaction of assemblies composed of soft pentagons interacting through classical Coulomb friction via numerical simulations. The effect of the initial particle shape is discussed by comparing packings of pentagons with packings of soft circular particles. We characterize the evolution of the packing fraction, the elastic modulus, and the microstructure (particle rearrangement, connectivity, contact force and particle stress distributions) as a function of the applied stresses. Both systems behave similarly; the packing fraction increases and tends asymptotically to a maximum value $\phi_{max}$, where the bulk modulus diverges. At the microscopic scale we show that particle rearrangements occur even beyond the jammed state, the mean coordination increases as a square root of the packing fraction and, the force and stress distributions become more homogeneous as the packing fraction increases. Soft pentagons present larger particle rearrangements than circular ones, and such behavior decreases proportionally to the friction. Interestingly, the friction between particles also contributes to a better homogenization of the contact force network in both systems. From the expression of the granular stress tensor, we develop a model that describes the compaction behavior as a function of the applied pressure, the Young modulus and the initial shape of the particles. This model, settled on the joint evolution of the particle connectivity and the contact stress, provides outstanding predictions from the jamming point up to very high densities.

cond-mat.soft↗

arXiv2020

Compaction of mixtures of rigid and highly deformable particles: a micro-mechanical model

We analyze the isotropic compaction of mixtures composed of rigid and deformable incompressible particles by the non-smooth contact dynamics approach (NSCD). The deformable bodies are simulated using a hyper-elastic neo-Hookean constitutive law by means of classical finite elements. For mixtures that varied from totally rigid to totally deformable particles, we characterize the evolution of the packing fraction, the elastic modulus, and the connectivity as a function of the applied stresses when varying inter-particle coefficient of friction. We show first that the packing fraction increases and tends asymptotically to a maximum value $\phi_{max}$, which depends on both the mixture ratio and the inter-particle friction. The bulk modulus is also shown to increase with the packing fraction and to diverges as it approaches $\phi_{max}$. From the micro-mechanical expression of the granular stress tensor, we develop a model to describe the compaction behavior as a function of the applied pressure, the Young modulus of the deformable particles, and the mixture ratio. A bulk equation is also derived from the compaction equation. This model lays on the characterization of a single deformable particle under compression together with a power-law relation between connectivity and packing fraction. This compaction model, set by well-defined physical quantities, results in outstanding predictions from the jamming point up to very high densities and allows us to give a direct prediction of $\phi_{max}$ as a function of both the mixture ratio and the friction coefficient.

cond-mat.soft↗

arXiv2008

Euler-like modelling of dense granular flows: application to a rotating drum

General conservation equations are derived for 2D dense granular flows from the Euler equation within the Boussinesq approximation. In steady flows, the 2D fields of granular temperature, vorticity and stream function are shown to be encoded in two scalar functions only. We checked such prediction on steady surface flows in a rotating drum simulated through the Non-Smooth Contact Dynamics method. This result is non trivial because granular flows are dissipative and therefore not necessarily compatible with Euler equation. Finally, we briefly discuss some possible ways to predict theoretically these two functions using statistical mechanics.

cond-mat.stat-mech↗

arXiv2005

Numerical simulation of 2D steady granular flows in rotating drum: On surface flows rheology

The rheology of 2D steady surface flow of cohesionless cylinders in a rotating drum is investigated through {\em Non Smooth Contact Dynamics} simulations. Profile of volume fraction, translational and angular velocity, rms velocity, strain rate and stress tensor were measured at the midpoint along the length of the surface flowing layer where the flow is generally considered as steady and homogeneous. Analysis of these data and their inter-relations suggest the local inertial number - defined as the ratio between local inertial forces and local confinement forces - to be the relevant dimensionless parameter to describe the transition from the quasi-static part of the packing to the flowing part at the surface of the heap. Variations of the components of the stress tensor as well as the ones of rms velocity as a function of the inertial number are analysed within both the quasi-static and the flowing phases. Their implications are discussed.

cond-mat.soft↗