arXiv subjects

Matt Dobbs

Publications and source records attributed to Matt Dobbs.

At least 19 recordsLinked to original sources

arXiv2026

The CHIME/FRB Outriggers: Commissioning the Hat Creek Outrigger and an Updated Calibration Scheme for Mitigating RFI

This work presents commissioning of the Hat Creek Outrigger (HCO), a dual-polarization 256-element radio interferometer that is part of the Canadian Hydrogen Intensity Mapping Experiment Fast Radio Burst (CHIME/FRB) Outrigger project. Driven by a complex radio-frequency interference (RFI) environment that consistently contaminates $\sim40\%$ of HCO's usable bandwidth, we implement an improved calibration scheme using Gaussian Process Regression to recover complex gain solutions over RFI contaminated channels. To validate our method, we test the performance of the array using known transients and continuum sources over relevant timescales used for fast-transient research ($\lesssim$ seconds). We find that our updated calibration scheme results in a $\sim1.69\times~\mathrm{to}~1.87\times$ improvement in the array's point-source sensitivity, while simultaneously maintaining noise properties consistent with thermal statistics. As a result, we find that the array performs consistently within theoretical expectations across $\gtrsim80\%$ of HCO's bandpass. We further observe an improvement in the interferometric performance after applying recently developed spatial filtering techniques for RFI mitigation, which rely on accurate calibration solutions for effective removal of unwanted interference. We conclude that our approach provides a valid framework for improving calibration solutions over RFI contaminated channels for large-$N$ interferometric arrays more broadly. Our work motivates future development of more sophisticated techniques to recover astrophysical information in RFI-contaminated channels, departing from the historical practice of discarding them outright.

astro-ph.IM↗

arXiv2026

Project management of the Canadian Hydrogen Observatory and Radio-transient Detector

The Canadian Hydrogen Observatory and Radio-transient Detector (CHORD) is a new drift-scan radio interferometer operating from 300-1500 MHz, optimized for 21cm intensity mapping, 21cm galaxy detection, pulsars, and transient detection and localization. The full instrument will feature a core array of 512 six-meter dishes, plus two 64-dish outriggers at several thousand kilometer baselines. The project is nearing completion of the first 64-dish sub array, which will enable commissioning activities to begin in parallel with the remaining construction. In this presentation, we discuss the project management framework that has enabled us to navigate the logistical challenges of a fixed-budget, fixed-timeline research infrastructure project through a period of significant global economic and technological volatility.

astro-ph.IM↗

arXiv2026

Evidence for Enhancement in the Rate of Fast Radio Bursts Toward Galaxy Clusters

Massive galaxy clusters can introduce gravitational lensing and populations of suppressed star formation member galaxies into the line of sight, potentially changing the distribution of observable sources toward them from that of the average sky. As a result, Fast Radio Bursts (FRBs) aligned with galaxy clusters can provide a unique window into parameter spaces of the FRB population that other lines of sight do not afford. In this study, we demonstrate that the second CHIME/FRB baseband catalog contains FRBs emitted from within or behind clusters identified from the latest DECaLS data release; we isolate a sample of 26 FRBs where this is likely, including one repeating FRB and two FRBs that intersect the Coma cluster. Comparing our results against a range of simulated FRB populations, we conclude that the number of these associations represents a $3\sigma$ rate enhancement toward galaxy clusters, constituting $1.4\pm0.4\%$ of the FRBs detected in the second CHIME/FRB baseband catalog. We suggest that this enhancement is caused by an equal proportion of member galaxies hosting additional FRBs, and gravitational lensing magnifying background sources. We demonstrate that such contributions are sensitive to alternative progenitor channels and high redshift evolution in the FRB population, providing a future avenue for constraining these features. Considering the redshifts and masses of the associated clusters, we identify FRB 20211113A, which is aligned with the strong gravitational lens Abell 2218 as a potential lensed candidate for further consideration.

astro-ph.CO↗

arXiv2026

Tunable responsivity and bandwidth in microwave kinetic inductance detectors via readout current nonlinearity

Microwave kinetic inductance detectors (MKIDs) are generally read out with microwave readout tones of high enough amplitude to adequately suppress the noise contribution of the first-stage amplifier. At high readout power, the detector's resonant frequency is altered as a result of the dependence of the kinetic inductance on the internally circulating microwave current. With the tone placed below the resonant frequency, the nonlinear frequency shift results in a positive feedback effect that can significantly enhance the responsivity of the detector, to both optical and microwave power. We report a factor of 10 enhancement in optical response by tuning the readout power and frequency to close to the resonator's bifurcation point. A corresponding decrease in the bandwidth of the resonator is observed under these conditions. We show that the strength of the feedback effect can be easily selected by adjusting the excitation, and provide a map of possible operational states to do so. Operation of MKIDs in this mode could be used to improve sensitivity when non-intrinsic noise sources are significant.

cond-mat.supr-con↗

arXiv2026

Overview of the Canadian Hydrogen Observatory and Radio Transient Detector (CHORD) Project

The Canadian Hydrogen Observatory and Radio-transient Detector (CHORD) is a next-generation wideband radio interferometer currently being constructed and commissioned at the Dominion Radio Astrophysical Observatory in British Columbia, Canada. CHORD is designed for precision 21\,cm cosmology, fast radio transient discovery, spectral line galaxy surveys, and pulsar science using a highly redundant large-N, small-diameter drift-scan array architecture. The telescope consists of a 512-element core array of 6\,m dishes operating from 300--1500\,MHz in drift-scan mode, together with two 64-dish outrigger stations located at the Hat Creek Radio Observatory and the Green Bank Observatory for long-baseline transient localization. The instrument supports multiple simultaneous digital backends for interferometric correlation, FRB detection, pulsar beamforming, and high spectral resolution surveys. CHORD is designed with an emphasis on precision beam control and stable instrumental response, incorporating lessons learned from the Canadian Hydrogen Intensity Mapping Experiment (CHIME) while providing a substantial increase in sensitivity. Initial performance has been evaluated using a three-dish engineering array, and a 64-dish pathfinder array is currently being commissioned. The full array will be commissioned in 2028.

astro-ph.IM↗

arXiv2026

Architecture and Validation of the CRS F-Engine for the CHORD Radio Telescope

We introduce the design of the t0.technology Control and Readout System (CRS) F-Engine that will be used for the Canadian Hydrogen Observatory and Radio transient Detector (CHORD), a new radio interferometer currently being commissioned at the Dominion Radio Astrophysical Observatory (DRAO) in Canada. The CRS F-Engine will directly digitize and channelize 1024 individual RF signals from the 512 dual-polarized dishes of the core array using an array of 128 CRS boards, a multi-purpose microwave readout platform using an AMD Zynq Ultrascale+ RF-System-on-Chip (RFSoC) architecture. The CRS supports the required analog and digital signal processing and is appropriately scalable, with rack-mountable crates each supporting up to 16 CRS boards, equipped with a backplane for distribution of power, common clock and time synchronization signals, and a full-mesh network for intra-crate data transmission. Implemented on the CRS boards is the chFPGA firmware which supports the digitization of 8 analog signals at 3.2 GSPS and channelizes them with a CASPER-based PFB/FFT into 8,192 frequency bins with ~195 kHz of resolution, which are then re-quantized into (4 + 4i) bits for data offload to an external X-Engine. chFPGA supports multiple post-channelization signal processing options through separate bitstream files for different applications, such as a 100 GbE packet assembler-transmitter for CHORD to feed channelized data to its external GPU-based X-Engine, as well as FPGA-based N^2 correlators, including a single-board (N = 8) correlator (the ``Pocket Correlator"), and a multi-board corner-turn engine coupled with a half-CRS crate (N = 64) correlator. We demonstrate the performance of chFPGA by injecting a wideband Gaussian noise source into a CRS board running the Pocket Correlator firmware, and find that recovered digitized timestream and channelized data are in excellent agreement with expectations.

astro-ph.IM↗

arXiv2026

A High-Bandwidth Backplane for Wideband Radio Interferometers and Integration with the CHORD Telescope Correlators

Wide-band correlators for radio astronomy interferometers demand accurate, scalable signal processing backends that sustain high aggregate throughput while preserving stable timing alignment across a large number of signal chains. Addressing these coupled constraints is challenging without a co-designed backplane architecture. We present a backplane system developed for the Control Readout System (CRS) Field Programmable Gate Array (FPGA) platform, extending its capabilities to support high channel count wideband radio correlators. The design and validation process are guided by the requirements of the Canadian Hydrogen Observatory and Radio-transient Detector (CHORD) telescope, which provides a representative use case for the system's performance evaluation. Each backplane hosts up to four CRS boards, and a single crate integrates four interconnected backplanes to accommodate sixteen CRS modules (for a total of 128 digitized inputs per crate) interconnected through 25 Gbps per-lane links and an on-backplane data shuffle network. Comprehensive validation demonstrates robust high-speed link performance, sub-sampling-level timing alignment stability, and stable thermal and power behavior across environmental variations. The architecture delivers observatory-scale scalability, providing a low-jitter and phase-consistent foundation for wideband digital correlators. By supporting expansion from single-crate to multi-crate configurations without firmware modification, the system offers a practical and flexible path toward next-generation interferometers requiring tightly synchronized, high-throughput digital backends.

astro-ph.IM↗

arXiv2026

Interpretation of 21 cm Auto Power Spectrum Measurement at $z\sim 1$ by the Canadian Hydrogen Intensity Mapping Experiment

Observations with the Canadian Hydrogen Intensity Mapping Experiment (CHIME) have been used to measure the 21 cm intensity mapping auto power spectrum, at $z\sim 1$, over a frequency range from 608.2 MHz to 707.8 MHz at wavenumbers $0.4~h~{\rm Mpc}^{-1} \lesssim k \lesssim 1.5~h~{\rm Mpc}^{-1}$. In this paper, we present the results of two different approaches to interpreting this measurement. In the first approach, we use a parametric power spectrum model to constrain an amplitude parameter, defined as $\mathcal{A}^2_{\rm HI} \equiv 10^6 \Omega_{\rm HI}^2(b^2_{\rm HI}+\langle f \mu^2\rangle)^2$, where $\Omega_{\rm HI}$ is the cosmological density parameter for atomic hydrogen ($\rm HI$), $b_{\rm HI}$ is the linear bias for $\rm HI$, and $\langle f \mu^2\rangle$ incorporates the dominant large-scale impact of redshift-space distortions on the angle-averaged power spectrum. Imposing an additional prior on either $\Omega_{\rm HI}$ or $b_{\rm HI}$, based on values in the literature, allows us to break the pairwise degeneracy between those two parameters. In the second approach, we compare CHIME's measurement with predictions for the power spectrum of $\rm HI$ from the IllustrisTNG simulations, finding that the measurement disagrees with the TNG100 run at $3.1\sigma$ and the TNG300 run at $4.0\sigma$. This disagreement is most likely attributable to the strength of nonlinear redshift-space clustering of $\rm HI$ in the simulations, rather than the total abundance of $\rm HI$, and invites further investigation of the physical processes in the simulations that determine the behavior of $\rm HI$ at nonlinear scales. These results exemplify the ability of 21 cm intensity mapping to provide astrophysical information using measurements at nonlinear scales.

astro-ph.CO↗

arXiv2026

A spatial filter for mitigating radio interference and its application to CHIME/FRB Outriggers

The sensitivity of radio telescopes is becoming increasingly limited by the presence of radio frequency interference (RFI), which will worsen as the radio spectrum becomes more crowded. One context where this poses a challenge is the field of fast radio burst (FRB) science, where there is increasing scientific interest in capturing as large of a population of bursts as possible and accurately measuring their celestial coordinates using interferometry. With several modern radio facilities actively collecting data for large FRB surveys that will be transformative to the field, properly mitigating unwanted interference is essential for the science goals of these surveys to be met. In this work, we present variations of a spatial filter based on the Karhunen-Loeve (KL) Transform to enhance the sensitivity of radio interferometers and demonstrate its applicability to FRB detection and localization. We derive a particular variation of the filter for the case of point-like radio pulses, which we show reduces to the maximum-signal-to-noise beamformer. We apply this filter to CHIME/FRB baseband data and demonstrate its capability to enhance the sensitivity and overall localization rate of CHIME/FRB Outriggers. We compare the cross-correlation signal-to-noise obtained using the spatial filter with that obtained using a spectral-kurtosis RFI flagger for a sample of 100 FRBs recorded by CHIME and its Outriggers, and show that this filter will double the total number of FRBs successfully localized with the CHIME/FRB Outrigger telescopes. While demonstrated here in the context of CHIME/FRB Outriggers, the spatial filter presented in this work--which we have made publicly available--is broadly applicable to other interferometric radio facilities engaged in FRB science and transient detection, including next-generation telescopes such as CHORD, DSA-2000, BURSTT, and CHARTS.

astro-ph.IM↗

arXiv2026

The Second CHIME/FRB Catalog of Fast Radio Bursts

We present a catalog of 4539 fast radio bursts (FRBs) observed with the Canadian Hydrogen Intensity Mapping Experiment (CHIME) telescope between 25 July 2018 and 15 September 2023. These bursts originate from 3641 unique sources, including 981 bursts from 83 known repeating sources. For each FRB, the catalog provides a $O(10')$ estimate of sky location along with corresponding measurements of cumulative exposure time and survey sensitivity over the observing period. It includes a total-intensity dynamic spectrum between 400 and 800 MHz at 0.983 ms resolution. From this spectrum, we constrain a model of the burst morphology and measure key parameters such as arrival time, intrinsic temporal width, dispersion measure, scattering time, and flux density. This second catalog includes all FRBs from the first catalog, with every event reprocessed using a uniform and improved analysis framework. We show that previously published inferences remain valid under the updated measurements. We assess consistency of the detection rate across observational parameters, present initial distributions of burst properties, and outline ongoing and future studies that will use this catalog to investigate the nature of FRBs and their utility as astrophysical and cosmological probes.

astro-ph.HE↗

arXiv2026

The Squeezed Bispectrum from CHIME HI Emission and Planck CMB Lensing: Current Sensitivity and Forecasts

Line intensity mapping using atomic hydrogen (HI) has the potential to efficiently map large volumes of the universe if the signal can be successfully separated from overwhelmingly bright radio foreground emission. This motivates cross-correlations, to ascertain the cosmological nature of measured HI fluctuations, and to study their connections with galaxies and the underlying matter density field. However, these same foregrounds render the cross-correlation with projected fields such as the lensing of the cosmic microwave background (CMB) difficult. Indeed, the correlated Fourier modes vary slowly along the line of sight, and are thus most contaminated by the smooth-spectrum radio continuum foregrounds. In this paper, we implement a method that avoids this issue by attempting to measure the non-linear gravitational coupling of the small-scale 21cm power from the Canadian Hydrogen Intensity Mapping Experiment (CHIME) with large-scale Planck CMB lensing. This measurement is a position-dependent power spectrum, i.e. a squeezed integrated bispectrum. Using 94 nights of CHIME data between $1.0 < z < 1.3$ and aggressive foreground filtering, we find that the expected signal is five times smaller than the current noise. We forecast that incorporating the additional nights of CHIME data already collected would enable a signal-to-noise ratio of 3, without any further improvements in filtering for foreground cleaning.

astro-ph.CO↗

arXiv2025

Detection of Partial Coherence due to Multipath Propagation for FRB 20220413B with CHIME/FRB

Fast radio bursts (FRBs) are a $\sim$ millisecond-long transient phenomenon that propagate across extragalactic distances and are effectively a point source. Radio wave propagation through inhomogeneous distributions of plasma can act as a lens, generating multiple images of the emitted electric field. A lens can produce images of a point source where the phase of the electric field between images remains coherent when observed by a radio telescope. FRB 20220413B shows a complicated pulse structure with time separated components that may be image copies of the main components due to plasma lensing. We perform several analyses to determine if FRB 20220413B is consistent with expectations of a plasma lensed FRB. We analyze and fit the morphology of the burst to a plasma lens model and find consistency in the spectro-temporal profile but not the observed flux. Using the complex-valued channelized voltage data from the CHIME telescope, we perform a time-lag correlation analysis and report correlation signatures present in the electric field of FRB 20220413B. We find that there exists an excess correlation signature only in absolute power and not in phase. We perform a frequency-lag correlation analysis on the spectra of all subcomponents of the burst and find a consistent scintillation bandwidth across all components. We find the scintillation bandwidth is consistent with expectations of scattering due to the Milky Way. We interpret this as all burst components propagating through the same scintillation screen located in the Milky Way, which would generate the excess variance signature observed, even in the absence of phase coherence between burst components. We find that while the burst morphology can be modeled by a plasma lens, the coherent signature present in the time-lag correlation is consistent with the expectations of a common scattering screen, but not coherent plasma lensing.

astro-ph.HE↗

arXiv2025

Detection of the Cosmological 21 cm Signal in Auto-correlation at z ~ 1 with the Canadian Hydrogen Intensity Mapping Experiment

We present the first detection of the cosmological 21 cm intensity mapping signal in auto-correlation at z ~ 1 with the Canadian Hydrogen Intensity Mapping Experiment (CHIME). Using 94 nights of observation, we have measured the 21 cm auto-power spectrum over a frequency range from 608.2 MHz to 707.8 MHz (z = 1.34 to 1.01) at 0.4 h Mpc^-1 < k < 1.5 h Mpc^-1, with a detection significance of 12.5 sigma. Our analysis employs significant improvements to the CHIME data processing pipeline compared to previous work, including novel radio frequency interference (RFI) detection and masking algorithms, achromatic beamforming techniques, and foreground filtering before time averaging to minimize spectral leakage. We establish the robustness and reliability of our detection through a comprehensive suite of validation tests. We also measure the 21 cm signal in two independent sub-bands centered at z ~ 1.08 and z ~ 1.24 with detection significance of 8.7 sigma and 9.2 sigma, respectively. We briefly discuss the theoretical interpretation of these measurements in terms of a power spectrum model, deferring the details to a companion paper. This auto-power spectrum detection demonstrates CHIME's capability to probe large-scale structure through 21 cm intensity mapping without reliance on external galaxy surveys.

astro-ph.CO↗

arXiv2025

Readout noise of digital frequency multiplexed TES detectors for CUPID

Superconducting transition-edge sensor (TES) detectors have been the standard in Cosmic Microwave Background experiments for almost two decades and are now being adapted for use in nuclear physics, such as neutrinoless double beta decay searches. In this paper we focus on a new high-bandwidth frequency multiplexed TES readout system developed for CUPID, a neutrinoless double beta decay experiment that will replace CUORE. In order to achieve the high energy resolution requirements for CUPID, the readout noise of the system must be kept to a minimum. Low TES operating resistance and long wiring between the readout SQUID and the warm electronics are needed for CUPID, prompting a careful consideration of the design parameters of this application of frequency multiplexing. In this work, we characterize the readout noise of the newly designed frequency multiplexed TES readout system for CUPID and construct a noise model to understand it. We find that current sharing between the SQUID coil impedance and other branches of the circuit, as well as the long output wiring, worsen the readout noise of the system. To meet noise requirements, a SQUID with a low input inductance, high transimpedance and/or low dynamic impedance is needed, and the wiring capacitance should be kept as small as possible. Alternatively, the option of adding a cryogenic low-noise amplifier at the output of the SQUID should be explored.

physics.ins-det↗

arXiv2025

FRB 20250316A: A Brilliant and Nearby One-Off Fast Radio Burst Localized to 13 parsec Precision

Precise localizations of a small number of repeating fast radio bursts (FRBs) using very long baseline interferometry (VLBI) have enabled multiwavelength follow-up observations revealing diverse local environments. However, the 2--3\% of FRB sources that are observed to repeat may not be representative of the full population. Here we use the VLBI capabilities of the full CHIME Outriggers array for the first time to localize a nearby (40 Mpc), bright (kJy), and apparently one-off FRB source, FRB 20250316A, to its environment on 13-pc scales. We use optical and radio observations to place deep constraints on associated transient emission and the properties of its local environment. We place a $5\sigma$ upper limit of $L_{\mathrm{9.9~\mathrm{GHz}}} < 2.1\times10^{25}~\mathrm{erg~s^{-1}~Hz^{-1}}$ on spatially coincident radio emission, a factor of 100 lower than any known compact persistent radio source associated with an FRB. Our KCWI observations allow us to characterize the gas density, metallicity, nature of gas ionization, dust extinction and star-formation rate through emission line fluxes. We leverage the exceptional brightness and proximity of this source to place deep constraints on the repetition of FRB 20250316A, and find it is inconsistent with all well-studied repeaters given the non-detection of bursts at lower spectral energies. We explore the implications of a measured offset of 190$\pm20$ pc from the center of the nearest star-formation region, in the context of progenitor channels. FRB 20250316A marks the beginning of an era of routine localizations for one-off FRBs on tens of mas-scales, enabling large-scale studies of their local environments.

astro-ph.HE↗

arXiv2025

In-situ control of the resonant frequency of kinetic inductance detectors with multiplexed readout

Large multiplexing factors are a primary advantage of kinetic inductance detectors (KIDs), but the implementation of high density arrays still presents significant challenges. Deviations between designed and achieved resonant frequencies are common, and differential loading and responsivity variation across an array may lead to dynamic inter-resonator interactions. It is therefore valuable to be able to both set and maintain the resonant frequency of a KID in situ, using the readout system. We show that it is possible to alter the resonant frequency of the devices by multiple linewidths through the application of readout current, and establish a new stable operational bias point at the driven frequency by making use of the hysteretic bistability commonly seen as bifurcation in frequency-domain measurements. We examine this interaction using a readout tone at fixed frequency positioned near or within the unbiased resonant bandwidth. Development of a control methodology based on this principle remains in an early stage, but a foundational step is understanding the interaction of the readout current with the resonator, in particular its influence on the resonant frequency. In this work, we study conventional KIDs with no physical isolation from the substrate, so we posit that the readout current primarily interacts with the resonator via non-thermal mechanisms, resulting in a predominantly reactive response. This behaviour is reproduced by a simple lumped-element circuit model of the resonance and readout system, providing a straightforward framework for analysis and interpretation. This demonstration is an important early step in the development of techniques which seek to dynamically alter the resonant frequencies of conventional KID arrays, and sets the stage for fast active resonant frequency control under operational conditions.

physics.ins-det↗

arXiv2025

CHIME/FRB Outriggers: Design Overview

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) has emerged as the world's premier facility for studying fast radio bursts (FRBs) through its fast transient search backend CHIME/FRB\@. The CHIME/FRB Outriggers project will augment this high detection rate of 2--3 FRBs per day with the ability to precisely localize them using very long baseline interferometry (VLBI). Using three strategically located stations in North America and deploying recently developed synoptic VLBI observing techniques, the Outriggers will provide $\sim 50$~milliarcsecond localization precision for the majority of detected FRBs. This paper presents an overview of the design and implementation of the Outriggers, covering their geographic distribution, structural design, and observational capabilities. We detail the scientific objectives driving the project, including the characterization of FRB populations, host galaxy demographics, and the use of FRBs as cosmological probes. We also discuss the calibration strategies available to mitigate ionospheric and instrumental effects, ensuring high-precision localization. With two stations currently in science operations, and the third in commissioning, the CHIME/FRB Outriggers project is poised to become a cornerstone of the FRB field, offering unprecedented insights into this enigmatic cosmic phenomenon.

astro-ph.HE↗

arXiv2025

Forecasting the FRB Population Observed Through Galaxy Cluster Lenses

High redshift Fast Radio Bursts (FRBs) are expected to be extremely powerful probes of our Universe. However, while a significant number of FRBs are expected to exist at high redshift, detecting them has been difficult, with only a handful robustly confirmed at redshifts greater than one. In many other fields, gravitational lensing from galaxy clusters has enabled high redshift detections by magnifying background sources. In this work we forecast the populations of FRBs expected to be detected by CHIME and upcoming instrument CHORD, for blank fields and by lensing through a range of strong lensing galaxy clusters, based on existing, observationally driven cluster models. We find that the presence of a galaxy cluster of mass $M\geq5\times10^{14} M_\odot$ within the detection beam of a transit telescope will approximately double the rate of detected high redshift ($z\geq1$ CHIME, $z\geq2$ CHORD) FRBs for that beam. Consequently, we find that knowledge of cluster positions can be used by instruments like CHIME or CHORD in tandem with novel observational strategies to isolate a sample of high redshift FRBs with $\gtrsim50\%$ purity at rate of $\lesssim3$ per year. This would provide a statistically high redshift sample of mostly gravitationally lensed FRBs, that would be ideal candidates for optical follow-up, constraining the FRB-star formation relation and for use in cosmological studies including measuring $H_0$, characterising dark matter substructures and probing reionization.

astro-ph.HE↗