Searcharxiv⌕ Search

arXiv subjects

Matteo Gatti

Publications and source records attributed to Matteo Gatti.

At least 37 records · Page 2Linked to original sources

Resonant inelastic x-ray scattering study of doping and temperature dependence of low-energy excitations in La$_{1-x}$Sr$_x$VO$_3$

We present a temperature and doping dependent resonant inelastic X-ray scattering experiment at the V L$_{2,3}$ and O K edges in La$_{1-x}$Sr$_x$VO$_3$ for $x=0$ and $x=0.1$. This material is a canonical example of a compound that exhibits a filling control metal-insulator transition and undergoes orbital ordering and antiferromagnetic transitions at low temperature. Temperature dependent measurements at the V L$_{3}$ edge reveal an intra-t$_{2g}$ excitation that blueshifts by 40 meV from room temperature to 30 K at a rate that differs between the para- and antiferromagnetic phases. The lineshape can be partially explained by a purely local model using crystal field theory calculations. At $x=0.1$ the doping is shown to affect the local electronic structure primarily on the O sites, which is in disagreement with a simple Mott-Hubbard picture. We reveal the presence of phonon overtone features at the O K edge, which evidences that the low energy part of the spectrum is dominated by phonon response.

cond-mat.str-el↗

Re-using model results to determine materials properties: connector theory approach

Computational materials design often profits from the fact that some complicated contributions are not calculated for the real material, but replaced by results of models. We turn this approximation into a very general and in principle exact theory by introducing the concept of a connector, which is a prescription of how to use the results of a model system in order to simulate a real system. We set the conditions that must be fulfilled for the existence of an exact connector. We demonstrate that, and why, this approach is a very convenient starting point for approximations. We also show that the connector theory can be used to design new functionals, for example for density functional theory. We illustrate our purposes with simple but realistic examples.

cond-mat.other↗

Subpicosecond metamagnetic phase transition driven by non-equilibrium electron dynamics

Femtosecond light-induced phase transitions between different macroscopic orders provide the possibility to tune the functional properties of condensed matter on ultrafast timescales. In first-order phase transitions, transient non-equilibrium phases and inherent phase coexistence often preclude non-ambiguous detection of transition precursors and their temporal onset. Here, we present a study combining time-resolved photoelectron spectroscopy and ab-initio electron dynamics calculations elucidating the transient subpicosecond processes governing the photoinduced generation of ferromagnetic order in antiferromagnetic FeRh. The transient photoemission spectra are accounted for by assuming that not only the occupation of electronic states is modified during the photoexcitation process. Instead, the photo-generated non-thermal distribution of electrons modifies the electronic band structure. The ferromagnetic phase of FeRh, characterized by a minority band near the Fermi energy, is established 350+- 30 fs after the laser excitation. Ab-initio calculations indicate that the phase transition is initiated by a photoinduced Rh-to-Fe charge transfer.

cond-mat.str-el↗

First-principles study of excitons in the optical spectra of silver chloride

Silver chloride is a material that has been investigated and used for many decades. Of particular interest are its optical properties, but only few fundamental theoretical studies exist. We present first-principles results for the optical properties of AgCl, obtained using time-dependent density functional theory and many-body perturbation theory. We show that optical properties exhibit strong excitonic effects, which are correctly captured only by solving the Bethe-Salpeter equation starting from quasiparticle self-consistent GW results. Numerical simulations are made feasible by using a model screening for the electron-hole interaction in a way that avoids the calculation of the static dielectric constant. A thorough analysis permits us to discuss localization in bright and dark excitons of silver chloride.

cond-mat.mtrl-sci↗

Strategies to build functionals of the density, or functionals of Green's functions: what can we learn?

The many-body problem can in general not be solved exactly, and one of the most prominent approximations is to build perturbation expansions. A huge variety of expansions is possible, which differ by the quantity to be expanded, the expansion variable, the starting point, and ideas how to resum or terminate the series. Although much has been discussed and much has been done, some choices were made for historical reasons, in particular, limited computation or storage capacities. The present work aims at examining the justifications for different choices made in different contexts, by comparing ingredients of functionals based on \GF s on one side, and on the charge density on the other side. Of particular interest will be the question of how to build an optimal starting point for the approximation of non-local quantities, making use of near- or far-sightedness, and daring to consider models beyond the homogeneous electron gas. This will include the use of connector approximations. We will also discuss why it is a good idea to build functionals of the density.

physics.chem-ph↗

Insights into one-body density matrices using deep learning

The one-body reduced density matrix (1-RDM) of a many-body system at zero temperature gives direct access to many observables, such as the charge density, kinetic energy and occupation numbers. It would be desirable to express it as a simple functional of the density or of other local observables, but to date satisfactory approximations have not yet been found. Deep learning is the state-of the art approach to perform high dimensional regressions and classification tasks, and is becoming widely used in the condensed matter community to develop increasingly accurate density functionals. Autoencoders are deep learning models that perform efficient dimensionality reduction, allowing the distillation of data to its fundamental features needed to represent it. By training autoencoders on a large data-set of 1-RDMs from exactly solvable real-space model systems, and performing principal component analysis, the machine learns to what extent the data can be compressed and hence how it is constrained. We gain insight into these machine learned constraints and employ them to inform approximations to the 1-RDM as a functional of the charge density. We exploit known physical properties of the 1-RDM in the simplest possible cases to perform feature engineering, where we inform the structure of the models from known mathematical relations, allowing us to integrate existing understanding into the machine learning methods. By comparing various deep learning approaches we gain insight into what physical features of the density matrix are most amenable to machine learning, utilising both known and learned characteristics.

physics.comp-ph↗

Non-local and non-adiabatic effects in the charge-density response of solids: a time-dependent density functional approach

The charge-density response of extended materials is usually dominated by the collective oscillation of electrons, the plasmons. Beyond this feature, however, intriguing many-body effects are observed. They cannot be described by one of the most widely used approaches for the calculation of dielectric functions, which is time-dependent density functional theory (TDDFT) in the adiabatic local density approximation (ALDA). Here we propose an approximation to the TDDFT exchange-correlation kernel which is non-adiabatic and non-local. It is derived in the homogeneous electron gas and implemented in the real system in a simple mean density approximation. This kernel contains effects that are completely absent in the ALDA; in particular, it correctly describes the double plasmon in the dynamic structure factor of sodium, and it shows the characteristic low-energy peak that appears in systems with low electronic density. It also leads to an overall quantitative improvement of spectra.

cond-mat.mtrl-sci↗

Dispersing and non-dispersing satellites in the photoemission spectra of aluminum

Satellites in electronic spectra are pure many-body effects, and their study has been of increasing interest in both experiment and theory. The presence of satellites due to plasmon excitations can be understood with simple models of electron-boson coupling. It is far from obvious how to match such a model to real spectra, where more than one kind of quasi-particle and of satellite excitation coexist. Our joint experimental and theoretical study shows that satellites in the angle-resolved photoemission spectra of the prototype simple metal aluminum consist of a superposition of dispersing and non-dispersing features. Both are due to electron-electron interaction, but the non-dispersing satellites also reflect the thermal motion of the atoms. Moreover, besides their energy dispersion, we also show and explain a strong shape dispersion of the satellites. By taking into account these effects, our first principles calculations using the GW+C approach of many-body perturbation theory reproduce and explain the experimental spectra to an unprecedented extent.

cond-mat.str-el↗

Spectroscopy of the Hubbard dimer: the spectral potential

The spectral potential is the dynamical generalization of the Kohn-Sham potential. It targets, in principle exactly, the spectral function in addition to the electronic density. Here we examine the spectral potential in one of the simplest solvable models exhibiting a non-trivial interplay between electron-electron interaction and inhomogeneity, namely the asymmetric Hubbard dimer. We discuss a general strategy to introduce approximations, which consists in calculating the spectral potential in the homogeneous limit (here represented by the symmetric Hubbard dimer) and importing it in the real inhomogeneous system through a suitable "connector". The comparison of different levels of approximation to the spectral potential with the exact solution of the asymmetric Hubbard dimer gives insights about the advantages and the difficulties of this connector strategy for applications in real materials.

cond-mat.str-el↗

Cubic BN optical gap and intragap optically active defects

We report a comprehensive study on the optical properties of cubic boron nitride (c-BN) and its optically active defects. Using electron energy-loss spectroscopy (EELS) within a monochromated scanning transmission electron microscope (STEM) on the highest-quality crystals available, we demonstrate unequivocally that the optical-gap energy of c-BN slightly exceeds 10 eV. Further theoretical analysis in the framework of the Bethe-Salpeter equation of many-body perturbation theory supports this result. The spatial localization of defect-related emissions has been investigated using nanometric resolved cathodoluminescence (nano-CL) in a STEM. By high-temperature annealing a c-BN powder, we have promoted phase transitions in nanometric domains which have been detected by the appearance of specific hexagonal-phase signatures in both EELS and CL spectra. A high number of intragap optically active centers are known in c-BN, but the literature is rather scattered and hence has been summarized here. For several emission lines we have obtained nano-CL maps which show emission spot sizes as small as few tens of nanometers. Finally, by coupling nano-CL to a Hanbury-Brown-Twiss intensity interferometer, we have addressed individual spots in order to identify the possible presence of single-photon sources. The observed CL bunching effect is compatible with a limited set of single-photon emitters and it permits obtaining emission lifetimes of the order of the nanosecond.

cond-mat.mtrl-sci↗

Laser induced phase transition in epitaxial FeRh layers studied by pump-probe valence band photoemission

We use time-resolved X-ray photoelectron spectroscopy to probe the electronic and magnetization dynamics in FeRh films after ultrafast laser excitations. We present experimental and theoretical results which investigate the electronic structure of the FeRh during the first-order phase transition identifying a clear signature of the magnetic phase. We find that a spin polarized feature at the Fermi edge is a fingerprint of the magnetic status of the system that is independent of the long-range ferromagnetic alignment of the magnetic domains. We use this feature to follow the phase transition induced by a laser pulse in a pump-probe experiment and find that the magnetic transition occurs in less than 50 ps, and reaches its maximum in 100 ps.

cond-mat.str-el↗

Cumulant Green's function calculations of plasmon satellites in bulk sodium: influence of screening and the crystal environment

We present ab initio calculations of the photoemission spectra of bulk sodium using different flavors of the cumulant expansion approximation for the Green's function. In particular, we study the dispersion and intensity of the plasmon satellites. We show that the satellite spectrum is much more sensitive to many details than the quasi-particle (QP) spectrum, which suggests that the experimental investigation of satellites could yield additional information beyond the usual studies of the band structure. In particular, a comparison to the homogeneous electron gas (HEG) shows that the satellites are influenced by the crystal environment, although the crystal potential in sodium is weak. Moreover, the temperature dependence of the lattice constant is reflected in the position of the satellites. Details of the screening also play an important role; in particular, the contribution of transitions from 2s and 2p semi-core levels influence the satellites, but not the QP. Moreover, inclusion of contributions to the screening beyond the RPA has an effect on the satellites. Finally, we elucidate the importance of the coupling of electrons and holes by comparing the results of the time-ordered (TOC) and the retarded (RC) cumulant expansion approximations. Again, we find small but noticeable differences. Since all the small effects add up, our most advanced calculation yields a satellite position which is improved with respect to previous calculations by almost one eV. This stresses the fact that the calculation of satellites is much more delicate than the calculation of a QP band structure.

cond-mat.str-el↗

Dynamical local connector approximation for electron addition and removal spectra

Realistic calculations of electron addition and removal spectra rely most often on Green's functions and complex, non-local self-energies. We introduce a shortcut to obtain the spectral function directly from a local and frequency-dependent, yet real, potential. We calculate this potential in the homogeneous electron gas (HEG), and we design a connector which prescribes the use of the HEG results to calculate spectral functions of real materials. Benchmark results for several solids demonstrate the potential of our approach.

cond-mat.mtrl-sci↗

Electron-energy-loss and time-dependent density functional theory study on the plasmon dispersion in 2H-NbS2

We examine the experimental and theoretical electron-energy loss spectra in 2$H$-Cu$_{0.2}$NbS$_2$ and find that the 1 eV plasmon in this material does not exhibit the regular positive quadratic plasmon dispersion that would be expected for a normal broad-parabolic-band system. Instead we find a nearly non-dispersing plasmon in the momentum-transfer range $q<0.35$ Å$^{-1}$. We argue that for a stoichiometric pure 2$H$-NbS$_2$ the dispersion relation is expected to have a negative slope as is the case for other transition-metal dichalcogenides. The presence of Cu impurities, required to stabilize the crystal growth, tends to shift the negative plasmon dispersion into a positive one, but the doping level in the current system is small enough to result in a nearly-non-dispersing plasmon. We conclude that a negative-slope plasmon dispersion is not connected with the existence of a charge-density-wave order in transition metal dichalcogenides.

cond-mat.str-el↗

Excitons in van der Waals materials: from monolayer to bulk hexagonal boron nitride

We present a general picture of the exciton properties of layered materials in terms of the excitations of their single-layer building blocks. To this end, we derive a model excitonic hamiltonian by drawing an analogy with molecular crystals, which are other prototypical van der Waals materials. We employ this simplified model to analyse in detail the excitation spectrum of hexagonal boron nitride (hBN) that we have obtained from the {\it ab initio} solution of the many-body Bethe-Salpeter equation as a function of momentum. In this way we identify the character of the lowest-energy excitons in hBN, discuss the effects of the interlayer hopping and the electron-hole exchange interaction on the exciton dispersion, and illustrate the relation between exciton and plasmon excitations in layered materials.

cond-mat.mtrl-sci↗

Exciton band structure in two-dimensional materials

Low-dimensional materials differ from their bulk counterpart in many respects. In particular, the screening of the Coulomb interaction is strongly reduced, which can have important consequences such as the significant increase of exciton binding energies. In bulk materials the binding energy is used as an indicator in optical spectra to distinguish different kinds of excitons, but this is not possible in low-dimensional materials, where the binding energy is large and comparable in size for excitons of very different localization. Here we demonstrate that the exciton band structure, which can be accessed experimentally, instead provides a powerful way to identify the exciton character. By comparing the ab initio solution of the many-body Bethe-Salpeter equation for graphane and single-layer hexagonal BN, we draw a general picture of the exciton dispersion in two-dimensional materials, highlighting the different role played by the exchange electron-hole interaction and by the electronic band structure. Our interpretation is substantiated by a prediction for phosphorene.

cond-mat.mtrl-sci↗

Exciton energy-momentum map of hexagonal boron nitride

Understanding and controlling the way excitons propagate in solids is a key for tailoring materials with improved optoelectronic properties. A fundamental step in this direction is the determination of the exciton energy-momentum dispersion. Here, thanks to the solution of the parameter-free Bethe- Salpeter equation (BSE), we draw and explain the exciton energy-momentum map of hexagonal boron nitride (h-BN) in the first three Brillouin zones. We show that h-BN displays strong excitonic effects not only in the optical spectra at vanishing momentum $\mathbf{q}$, as previously reported, but also at large $\mathbf{q}$. We validate our theoretical predictions by assessing the calculated exciton map by means of an inelastic x-ray scattering (IXS) experiment. Moreover, we solve the discrepancies between previous experimental data and calculations, proving then that the BSE is highly accurate through the whole momentum range. Therefore, these results put forward the combination BSE and IXS as the tool of choice for addressing the exciton dynamics in complex materials.

cond-mat.mtrl-sci↗

Stable room-temperature ferromagnetic phase at the FeRh(100) surface

Interfaces and low dimensionality are sources of strong modifications of electronic, structural, and magnetic properties of materials. FeRh alloys are an excellent example because of the first-order phase transition taking place at $\sim$400 K from an antiferromagnetic phase at room temperature to a high temperature ferromagnetic one. It is accompanied by a resistance change and volume expansion of about 1\%. We have investigated the electronic and magnetic properties of FeRh(100) epitaxially grown on MgO by combining spectroscopies characterized by different probing depths, namely X-ray magnetic circular dichroism and photoelectron spectroscopy. We thus reveal that the symmetry breaking induced at the Rh-terminated surface stabilizes a surface ferromagnetic layer involving five planes of Fe and Rh atoms in the nominally antiferromagnetic phase at room temperature. First-principles calculations provide a microscopic description of the structural relaxation and the electron spin-density distribution that fully support the experimental findings.

cond-mat.mtrl-sci↗