arXiv subjects

Matteo Nerini

Publications and source records attributed to Matteo Nerini.

At least 19 recordsLinked to original sources

arXiv2026

Microwave Linear Analog Computers (MiLACs) for Communications: Opportunities and Challenges

Future wireless systems will require ever larger antenna arrays and heavier signal processing, making conventional digital multiple-input multiple-output (MIMO) architectures difficult to scale. In this paper, we show that a possible solution is to offload part of the processing from the digital to the analog domain. This can be done through linear microwave networks designed to compute directly using the communication signals at radio frequency (RF). These networks, denoted as microwave linear analog computers (MiLACs), can perform useful matrix operations instantly through wave propagation. Remarkably, although MiLACs are linear, the output signals can depend nonlinearly on the tunable parameters of the network, enabling the computation of operations beyond simple linear transforms. In particular, MiLACs can realize matrix inversion and pseudo-inversion with complexity scaling quadratically with matrix size, rather than cubically, which is essential in zero-forcing beamforming. We then review how MiLAC-aided MIMO architectures can reduce the number of RF chains, relax the resolution requirements on digital-to-analog converters (DACs) and analog-to-digital converters (ADCs), and decrease the beamforming complexity. We finally discuss the main challenges related to MiLAC and promising directions for future research.

cs.IT↗

arXiv2026

Channel Estimation and Beamforming for Microwave Linear Analog Computers (MiLACs)-Aided Multiuser MISO Systems

Microwave linear analog computers (MiLACs) have recently gained attention for future gigantic multiple-input multiple-output (MIMO) systems by enabling beamforming with greatly reduced hardware and computational cost. However, channel estimation for MiLAC-aided multiuser systems remains an open problem. Conventional channel estimation requires many radio-frequency (RF) chains to access full-dimensional received signals, followed by massive digital processing, which undermines the advantages of MiLAC-aided systems in reducing the number of RF chains and computational complexity. In this paper, we propose computationally efficient channel estimation and beamforming schemes for MiLAC-aided multiuser multiple-input single-output (MU-MISO) systems with a limited number of RF chains. We consider the general case where different user groups experience different channel correlation matrices. By exploiting the rank deficiency of these matrices, the proposed schemes use MiLAC to compress the full-dimensional received signals in the analog domain, making them compatible with the available RF chains while preserving the essential channel information. Then, in the digital domain, only low-dimensional channel estimation is performed based on these compressed observations, substantially reducing computational cost. We further show how regularized zero-forcing beamforming (R-ZFBF) can be efficiently realized from the low-dimensional channel estimates through a cascade of two MiLACs, which offers greater computational flexibility than a single MiLAC. Numerical results show that the proposed schemes reduce computational complexity up to $1540\times$ and $16108\times$, for channel estimation and beamforming, respectively, while achieving performance comparable to digital baselines.

eess.SP↗

arXiv2026

Microwave Linear Analog Computer (MiLAC) for Simultaneous Active and Passive Beamforming

Microwave linear analog computers (MiLACs) have recently emerged to enable high-performance and efficient beamforming in the analog domain. In this paper, we introduce a dual-functionality framework for MiLAC-aided transceivers. Beyond analog-domain precoding/combining (active beamforming), a MiLAC and its antenna array can simultaneously act as a reconfigurable intelligent surface (RIS) (passive beamforming). This allows the MiLAC to execute beamforming for transmission/reception while reflecting external incident signals. We provide an optimal reconfiguration strategy for this dual-functional MiLAC, and characterize the fundamental limits on the trade-off between active and passive rate, namely the capacity region bounds and the sum-rate capacity.

cs.IT↗

arXiv2026

RIS Optimization and Scaling Laws in Multi-Operator Systems: Is Quadratic Scaling Achievable?

This paper studies multi-operator wireless communication systems aided by general reconfigurable intelligent surface (RIS), including both conventional single-connected RIS and beyond-diagonal RIS (BD-RIS). Specifically, we consider a system where multiple operators coexist in the same area over different frequency bands, each with a single-antenna base station, while one operator serves its single-antenna user with the aid of an RIS. In such a system, the RIS may unintentionally reflect signals from the non-serving operators, leading to inter-operator interference and rapid fluctuations of their effective channels. To address this issue, we propose a practical RIS design framework that maximizes the received signal power of the serving operator while enforcing fixed RIS-reflected channels of the non-serving operators. We derive closed-form solutions to the resulting optimization problem, based on a novel technique to deal with the coupled unitary and linear equality constraints. We further give scaling law analysis of the received signal power. For a two-operator system, the received signal power scales quadratically with the number of RIS elements for group-connected BD-RIS with group size Gs>=2, whereas for conventional single-connected RIS it scales only linearly. More generally, for an L-operator system with L-1 non-serving operators, the scaling-law transition occurs at Gs=L, where quadratic scaling is achieved when Gs>=L, and linear scaling otherwise. These results demonstrate that, in a multi-operator system, quadratic scaling is achievable only with BD-RIS architectures having enough interconnections. Simulation results validate the analysis and show the significant gain of BD-RIS over conventional RIS in multi-operator systems. In particular, group-connected BD-RIS with Gs=2 achieves a 13dB gain over conventional RIS in a two-operator system with a 128-element RIS.

cs.IT↗

arXiv2026

Active Beyond-Diagonal Reconfigurable Intelligent Surfaces: Modeling, Architecture Design, and Optimization

Beyond-diagonal reconfigurable intelligent surfaces (BD-RISs) are an emerging RIS 2.0 technology for future wireless communication. However, BD-RISs are primarily passive without active amplification, suffering from severe multiplicative path loss. To address the concern of multiplicative path loss, in this work we investigate the active BD-RIS including the modeling, architecture design, and optimization. We first analyze the active BD-RIS using multiport network theory with scattering parameters and derive a physical and electromagnetic compliant active BD-RIS aided communication model. We also design two new active BD-RIS architectures, namely fully- and group-connected active BD-RISs. Based on the proposed model and architecture, we investigate the active BD-RIS aided single-input single-output system and derive the closed-form optimal solution and scaling law of the signal-to-noise ratio. We further investigate the active BD-RIS aided multiple-input multiple-output system and propose an iterative algorithm based on quadratically constrained quadratic programming to maximize the spectral efficiency. Numerical results are provided and show that the active BD-RIS can achieve higher spectral efficiency than the active/passive diagonal RIS and passive BD-RIS. For example, to achieve the same spectral efficiency, the number of elements required by active BD-RIS is less than half of that required by active diagonal RIS, showing the advantages of active BD-RIS.

eess.SP↗

arXiv2026

Analog Computing with Hybrid Couplers and Phase Shifters

Analog computing with microwave signals can enable exceptionally fast computations, potentially surpassing the limits of conventional digital computing. For example, by letting some input signals propagate through a linear microwave network and reading the corresponding output signals, we can instantly compute a matrix-vector product without any digital operations. In this paper, we investigate the computational capabilities of linear microwave networks made exclusively of two low-cost and fundamental components: hybrid couplers and phase shifters, which are both implementable in microstrip. We derive a sufficient and necessary condition characterizing the class of linear transformations that can be computed in the analog domain using these two components. Within this class, we identify three transformations of particular relevance to signal processing, namely the discrete Fourier transform (DFT), the Hadamard transform, and the Haar transform. For each of these, we provide a systematic design method to construct networks of hybrid couplers and phase shifters capable of computing the transformation for any size power of two. To validate our theoretical results, a hardware prototype was designed and fabricated, integrating hybrid couplers and phase shifters to implement the $4\times4$ DFT. A systematic calibration procedure was subsequently developed to characterize the prototype and compensate for fabrication errors. Measured results from the prototype demonstrate successful DFT computation in the analog domain, showing high correlation with theoretical expectations. By realizing an analog computer through standard microwave components, this work demonstrates a practical pathway toward low-latency, real-time analog signal processing.

eess.SP↗

arXiv2026

Physics-Compliant Modeling and Optimization of MIMO Systems Aided by Microwave Linear Analog Computers

Microwave linear analog computer (MiLAC) has emerged as a promising architecture for implementing linear multiple-input multiple-output (MIMO) processing in the analog domain, with radio frequency (RF) signals. Existing studies on MiLAC-aided communications rely on idealized channel models and neglect antenna mutual coupling. However, since MiLAC performs processing at RF, mutual coupling becomes critical and alters the implemented operation, not only the channel characteristics. In this paper, we develop a physics-compliant model for MiLAC-aided MIMO systems accounting for mutual coupling with multiport network theory. We derive end-to-end system models for scenarios with MiLACs at the transmitter, the receiver, or both, showing how mutual coupling impacts the linear transformation implemented by the MiLACs. Furthermore, we formulate and solve a mutual coupling aware MiLAC optimization problem, deriving a closed-form globally optimal solution that maximizes the received signal power. We establish the fundamental performance limits of MiLAC with mutual coupling, and derive three analytical results. First, mutual coupling is beneficial in MiLAC-aided systems, on average. Second, with mutual coupling, MiLAC performs as digital architectures equipped with a matching network, while having fewer RF chains. Third, with mutual coupling, MiLAC always outperforms digital architectures with no matching network. Numerical simulations confirm our theoretical findings.

cs.IT↗

arXiv2026

Capacity of Two-User Wireless Systems Aided by Movable Signals

Movable signals have emerged as a third approach to enable smart radio environments (SREs), complementing reconfigurable intelligent surfaces (RISs) and flexible antennas. This paper investigates their potential to enhance multi-user wireless systems. Focusing on two-user systems in line-of-sight (LoS), we characterize the capacity regions of the multiple access channel (MAC) and broadcast channel (BC). Interestingly, movable signals can dynamically adjust the operating frequency to orthogonalize the user channels, thereby significantly expanding the capacity regions. We also study frequency optimization, constraining it in a limited frequency range, and show that movable signals provide up to 45% sum rate gain.

cs.IT↗

arXiv2026

Channel Estimation in MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs)

Microwave linear analog computers (MiLACs) have recently emerged as a promising solution for future gigantic multiple-input multiple-output (MIMO) systems, enabling beamforming with greatly reduced hardware and computational cost. However, channel estimation for MiLAC-aided systems remains an open problem. Conventional least squares (LS) and minimum mean square error (MMSE) estimation rely on intensive digital computation, which undermines the benefits offered by MiLACs. In this letter, we propose efficient LS and MMSE channel estimation schemes for MiLAC-aided MIMO systems. By designing training precoders and combiners implemented by MiLACs, both LS and MMSE estimation are performed fully in the analog domain, achieving identical performance to their digital counterparts while significantly reducing computational complexity, transmit RF chains, analog-to-digital/digital-to-analog converters (ADCs/DACs) resolution requirements, and peak-to-average power ratio (PAPR). Numerical results verify the effectiveness and advantages of the proposed schemes.

eess.SP↗

arXiv2026

Microwave Linear Analog Computer (MiLAC)-aided Multiuser MISO: Fundamental Limits and Beamforming Design

As wireless communication systems evolve toward the 6G era, ultra-massive/gigantic MIMO is envisioned as a key enabling technology. Recently, microwave linear analog computer (MiLAC) has emerged as a promising approach to realize beamforming entirely in the analog domain, thereby alleviating the scalability challenges associated with gigantic MIMO. In this paper, we investigate the fundamental beamforming flexibility and design of lossless and reciprocal MiLAC-aided beamforming for MU-MISO systems. We first provide a rigorous characterization of the set of beamforming matrices achievable by MiLAC. Based on this characterization, we prove that MiLAC-aided beamforming does not generally achieve the full flexibility of digital beamforming, while offering greater flexibility than conventional phase-shifter-based analog beamforming. Furthermore, we propose a hybrid digital-MiLAC architecture and show that it achieves digital beamforming flexibility when the number of radio frequency (RF) chains equals the number of data streams, halving that required by conventional hybrid beamforming. We then formulate the MiLAC-aided sum-rate maximization problem for MU-MISO systems. To solve the problem efficiently, we reformulate the MiLAC-related constraints as a convex linear matrix inequality and establish a low-dimensional subspace property that significantly reduces the problem dimension. Leveraging these results, we propose WMMSE-based algorithms for solving the resulting problem. Simulation results demonstrate that MiLAC-aided beamforming achieves performance close to that of digital beamforming in gigantic MIMO systems. Compared with hybrid beamforming, it achieves comparable or superior performance with lower hardware and computational complexity by avoiding symbol-level digital processing and enabling low-resolution digital-to-analog converters (DACs).

eess.SP↗

arXiv2026

Movable Beyond-Diagonal Reconfigurable Intelligent Surfaces: Moving, Interconnecting, or Both?

This letter proposes a movable beyond-diagonal reconfigurable intelligent surfaces (MA-BD-RIS) design, combining inter-element connectivity and movability for channel enhancement. We study a MA-BD-RIS assisted multi-user multiple input single output system where beamforming, BD-RIS configuration, and elements positions are jointly optimized to maximize the sum-rate. An efficient algorithm is developed, incorporating closed-form beamforming, a low-complexity partially proximal alternating direction method of multipliers for BD-RIS design, and successive convex approximation for element placement. Simulations show that the high-movability structure yields superior performance in small-scale RIS and rich scattering scenarios, while the high-connectivity structure dominates in large-scale RIS and massive transmit array configurations.

eess.SP↗

arXiv2026

Low-Complexity Planar Beyond-Diagonal RIS Architecture Design Using Graph Theory

Reconfigurable intelligent surfaces (RISs) enable programmable control of the wireless propagation environment and are key enablers for future networks. Beyond-diagonal RIS (BD-RIS) architectures enhance conventional RIS by interconnecting elements through tunable impedance components, offering greater flexibility with higher circuit complexity. However, excessive interconnections between BD-RIS elements require multi-layer printed circuit board (PCB) designs, increasing fabrication difficulty. In this letter, we use graph theory to characterize the BD-RIS architectures that can be realized on double-layer PCBs, denoted as planar-connected RISs. Among the possible planar-connected RISs, we identify the ones with the most degrees of freedom, expected to achieve the best performance under practical constraints.

cs.IT↗

arXiv2025

Movable Signals with Dual-Polarized Fixed Intelligent Surfaces: Beyond Diagonal Reflection Matrices

This paper investigates wireless systems aided by dual-polarized intelligent surfaces. We compare reconfigurable intelligent surface (RIS), which adjust their reflection matrices, with movable signals operating with fixed intelligent surface (FIS), which adjust the signal frequency while the surface properties remain fixed. For both RIS and FIS, we consider surfaces with a diagonal reflection matrix, named diagonal RIS/FIS, and surfaces with a reflection matrix not limited to being diagonal, named beyond-diagonal RIS/FIS. Movable signals with FIS always outperform RIS, achieving at least a fourfold gain. When transmitter and receiver polarizations differ, beyond-diagonal FIS further enhances performance.

cs.IT↗

arXiv2025

Enabling Smart Radio Environments in the Frequency Domain With Movable Signals

Smart radio environments (SREs) enhance wireless communications by allowing control over the channel. They have been enabled through surfaces with reconfigurable electromagnetic (EM) properties, known as reconfigurable intelligent surfaces (RISs), and through flexible antennas, which can be viewed as realizations of SREs in the EM domain and space domain, respectively. However, these technologies rely on electronically reconfigurable or movable components, introducing implementation challenges that could hinder commercialization. To overcome these challenges, we propose a new domain to enable SREs, the frequency domain, through the concept of movable signals, where the signal spectrum can be dynamically moved along the frequency axis. We first analyze movable signals in multiple-input single-output (MISO) systems under line-of-sight (LoS) conditions, showing that they can achieve higher average received power than quantized equal gain transmission (EGT). We then study movable signals under non-line-of-sight (NLoS) conditions, showing that they remain effective by leveraging reflections from surfaces made of uniformly spaced elements with fixed EM properties, denoted as fixed intelligent surfaces (FISs). Analytical results reveal that a FIS-aided system using movable signals can achieve up to four times the received power of a RIS-aided system using fixed-frequency signals.

cs.IT↗

arXiv2025

Beyond-Diagonal RIS Architecture Design and Optimization under Physics-Consistent Models

Reconfigurable intelligent surface (RIS) is a promising technology for future wireless communication systems. Conventional RIS is constrained to a diagonal scattering matrix, which limits its flexibility. Recently, beyond-diagonal RIS (BD-RIS) has been proposed as a more general RIS architecture class that allows inter-element connections and shows great potential for performance improvement. Despite extensive progress on BD-RIS, most existing studies rely on simplified channel models that ignore practical electromagnetic (EM) effects such as mutual coupling and impedance mismatching. To address this gap, this paper investigates the architecture design and optimization of BD-RIS under the general physics-consistent model derived with multiport network theory in recent literature. Building on a compact reformulation of this model, we show that band-connected RIS achieves the same channel-shaping capability as fully-connected RIS, which extends existing results obtained for conventional channel models. We then develop optimization methods under the general physics-consistent model; specifically, we derive closed-form solutions for single-input single-output (SISO) systems, propose a globally optimal semidefinite relaxation (SDR)-based algorithm for single-stream multi-input multi-output (MIMO) systems, and design an efficient alternating direction method of multipliers (ADMM)-based algorithm for multiuser MIMO systems. Using the proposed algorithms, we conduct comprehensive simulations to evaluate the impact of various EM effects and approximations. The results indicate that the commonly adopted unilateral approximation provides sufficient accuracy in RIS-aided systems and can therefore be readily adopted to simplify the channel model, whereas mutual coupling among RIS elements should be properly taken into account in channel modeling.

eess.SP↗

arXiv2025

MIMO Systems Aided by Microwave Linear Analog Computers: Capacity-Achieving Architectures with Reduced Circuit Complexity

To meet the demands of future wireless networks, antenna arrays must scale from massive multiple-input multiple-output (MIMO) to gigantic MIMO, involving even larger numbers of antennas. To address the hardware and computational cost of gigantic MIMO, several strategies are available that shift processing from the digital to the analog domain. Among them, microwave linear analog computers (MiLACs) offer a compelling solution by enabling fully analog beamforming through reconfigurable microwave networks. Prior work has focused on fully-connected MiLACs, whose ports are all interconnected to each other via tunable impedance components. Although such MiLACs are capacity-achieving, their circuit complexity, given by the number of required impedance components, scales quadratically with the number of antennas, limiting their practicality. To solve this issue, in this paper, we propose a graph theoretical model of MiLAC facilitating the systematic design of lower-complexity MiLAC architectures. Leveraging this model, we propose stem-connected MiLACs as a family of MiLAC architectures maintaining capacity-achieving performance while drastically reducing the circuit complexity. Besides, we optimize stem-connected MiLACs with a closed-form capacity-achieving solution. Our theoretical analysis, confirmed by numerical simulations, shows that stem-connected MiLACs are capacity-achieving, but with circuit complexity that scales linearly with the number of antennas, enabling high-performance, scalable, gigantic MIMO.

cs.IT↗

arXiv2025

Capacity of MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs)

Future wireless systems, known as gigantic multiple-input multiple-output (MIMO), are expected to enhance performance by significantly increasing the number of antennas, e.g., a few thousands. To enable gigantic MIMO overcoming the scalability limitations of digital architectures, microwave linear analog computers (MiLACs) have recently emerged. A MiLAC is a multiport microwave network that processes input microwave signals entirely in the analog domain, thereby reducing hardware costs and computational complexity of gigantic MIMO architectures. In this paper, we investigate the fundamental limits on the rate achievable in MiLAC-aided MIMO systems. We model a MIMO system employing MiLAC-aided beamforming at the transmitter and receiver, and formulate the rate maximization problem to optimize the microwave networks of the MiLACs, which are assumed lossless and reciprocal for practical reasons. Under the lossless and reciprocal constraints, we derive a global optimal solution for the microwave networks of the MiLACs in closed form. In addition, we also characterize in closed-form the capacity of MIMO systems operating MiLAC-aided beamforming. Our theoretical analysis, confirmed by numerical simulations, reveals that MiLAC-aided beamforming achieves the same capacity as digital beamforming, while significantly reducing the number of radio frequency (RF) chains, analog-to-digital converters (ADCs)/digital-to-analog converters (DACs) resolution requirements, and computational complexity.

cs.IT↗

arXiv2025

A Tutorial on Beyond-Diagonal Reconfigurable Intelligent Surfaces: Modeling, Architectures, System Design and Optimization, and Applications

Written by its inventors, this first tutorial on Beyond-Diagonal Reconfigurable Intelligent Surfaces (BD-RISs) provides the readers with the basics and fundamental tools necessary to appreciate, understand, and contribute to this emerging and disruptive technology. Conventional (Diagonal) RISs (D-RISs) are characterized by a diagonal scattering matrix $\mathbf{\Theta}$ such that the wave manipulation flexibility of D-RIS is extremely limited. In contrast, BD-RIS refers to a novel and general framework for RIS where its scattering matrix is not limited to be diagonal (hence, the ``beyond-diagonal'' terminology) and consequently, all entries of $\mathbf{\Theta}$ can potentially help shaping waves for much higher manipulation flexibility. This physically means that BD-RIS can artificially engineer and reconfigure coupling across elements of the surface thanks to inter-element reconfigurable components which allow waves absorbed by one element to flow through other elements. Consequently, BD-RIS opens the door to more general and versatile intelligent surfaces that subsumes existing RIS architectures as special cases. In this tutorial, we share all the secret sauce to model, design, and optimize BD-RIS and make BD-RIS transformative in many different applications. Topics discussed include physics-consistent and multi-port network-aided modeling; transmitting, reflecting, hybrid, and multi-sector mode analysis; reciprocal and non-reciprocal architecture designs and optimal performance-complexity Pareto frontier of BD-RIS; signal processing, optimization, and channel estimation for BD-RIS; hardware impairments (discrete-value impedance and admittance, lossy interconnections and components, wideband effects, mutual coupling) of BD-RIS; benefits and applications of BD-RIS in communications, sensing, power transfer.

eess.SP↗