arXiv subjects

Matteo Nerini

Publications and source records attributed to Matteo Nerini.

44 records · Page 3Linked to original sources

arXiv2023

Reconfigurable Intelligent Surfaces 2.0: Beyond Diagonal Phase Shift Matrices

Reconfigurable intelligent surface (RIS) has been envisioned as a promising technique to enable and enhance future wireless communications due to its potential to engineer the wireless channels in a cost-effective manner. Extensive research attention has been drawn to the use of conventional RIS 1.0 with diagonal phase shift matrices, where each RIS element is connected to its own load to ground but not connected to other elements. However, the simple architecture of RIS 1.0 limits its flexibility of manipulating passive beamforming. To fully exploit the benefits of RIS, in this paper, we introduce RIS 2.0 beyond diagonal phase shift matrices, namely beyond diagonal RIS (BD-RIS). We first explain the modeling of BD-RIS based on the scattering parameter network analysis and classify BD-RIS by the mathematical characteristics of the scattering matrix, supported modes, and architectures. Then, we provide simulations to evaluate the sum-rate performance with different modes/architectures of BD-RIS. We summarize the benefits of BD-RIS in providing high flexibility in wave manipulation, enlarging coverage, facilitating the deployment, and requiring low complexity in resolution bit and element numbers. Inspired by the benefits of BD-RIS, we also discuss potential applications of BD-RIS in various wireless systems. Finally, we list key challenges in modeling, designing, and implementing BD-RIS in practice and point to possible future research directions for BD-RIS.

eess.SP↗

arXiv2023

Pareto Frontier for the Performance-Complexity Trade-off in Beyond Diagonal Reconfigurable Intelligent Surfaces

Reconfigurable intelligent surface (RIS) is an emerging technology allowing to control the propagation environment in wireless communications. Recently, beyond diagonal RIS (BD-RIS) has been proposed to reach higher performance than conventional RIS, at the expense of higher circuit complexity. Multiple BD-RIS architectures have been developed with the goal of reaching a favorable trade-off between performance and circuit complexity. However, the fundamental limits of this trade-off are still unexplored. In this paper, we fill this gap by deriving the expression of the Pareto frontier for the performance-complexity trade-off in BD-RIS. Additionally, we characterize the optimal BD-RIS architectures reaching this Pareto frontier.

cs.IT↗

arXiv2023

Discrete-Value Group and Fully Connected Architectures for Beyond Diagonal Reconfigurable Intelligent Surfaces

Reconfigurable intelligent surfaces (RISs) allow controlling the propagation environment in wireless networks through reconfigurable elements. Recently, beyond diagonal RISs (BD-RISs) have been proposed as novel RIS architectures whose scattering matrix is not limited to being diagonal. However, BDRISs have been studied assuming continuous-value scattering matrices, which are hard to implement in practice. In this paper, we address this problem by proposing two solutions to realize discrete-value group and fully connected RISs. First, we propose scalar-discrete RISs, in which each entry of the RIS impedance matrix is independently discretized. Second, we propose vector-discrete RISs, where the entries in each group of the RIS impedance matrix are jointly discretized. In both solutions, the codebook is designed offline such as to minimize the distortion caused in the RIS impedance matrix by the discretization operation. Numerical results show that vector-discrete RISs achieve higher performance than scalar discrete RISs at the cost of increased optimization complexity. Furthermore, fewer resolution bits per impedance are necessary to achieve the performance upper bound as the group size of the group connected architecture increases. In particular, only a single resolution bit is sufficient in fully connected RISs to approximately achieve the performance upper bound.

cs.IT↗

arXiv2023

Closed-Form Global Optimization of Beyond Diagonal Reconfigurable Intelligent Surfaces

Reconfigurable intelligent surfaces (RISs) allow controlling the propagation environment in wireless networks by tuning multiple reflecting elements. RISs have been traditionally realized through single connected architectures, mathematically characterized by a diagonal scattering matrix. Recently, beyond diagonal RISs (BD-RISs) have been proposed as a novel branch of RISs whose scattering matrix is not limited to be diagonal, which creates new benefits and opportunities for RISs. Efficient BD-RIS architectures have been realized based on group and fully connected reconfigurable impedance networks. However, a closed-form solution for the global optimal scattering matrix of these architectures is not yet available. In this paper, we provide such a closed-form solution proving that the theoretical performance upper bounds can be exactly achieved for any channel realization. We first consider the received signal power maximization in single-user single-input single-output (SISO) systems aided by a BD-RIS working in reflective or transmissive mode. Then, we extend our solution to single-user multiple-input multiple-output (MIMO) and multi-user multiple-input single-output (MISO) systems. We show that our algorithm is less complex than the iterative optimization algorithms employed in the previous literature. The complexity of our algorithm grows linearly (resp. cubically) with the number of RIS elements in the case of group (resp. fully) connected architectures.

cs.IT↗

arXiv2023

Machine Learning-Based CSI Feedback With Variable Length in FDD Massive MIMO

To fully unlock the benefits of multiple-input multiple-output (MIMO) networks, downlink channel state information (CSI) is required at the base station (BS). In frequency division duplex (FDD) systems, the CSI is acquired through a feedback signal from the user equipment (UE). However, this may lead to an important overhead in FDD massive MIMO systems. Focusing on these systems, in this study, we propose a novel strategy to design the CSI feedback. Our strategy allows to optimally design variable length feedback, that is promising compared to fixed feedback since users experience channel matrices differently sparse. Specifically, principal component analysis (PCA) is used to compress the channel into a latent space with adaptive dimensionality. To quantize this compressed channel, the feedback bits are smartly allocated to the latent space dimensions by minimizing the normalized mean squared error (NMSE) distortion. Finally, the quantization codebook is determined with k-means clustering. Numerical simulations show that our strategy improves the zero-forcing beamforming sum rate by 17%, compared to CsiNetPro. The number of model parameters is reduced by 23.4 times, thus causing a significantly smaller offloading overhead. At the same time, PCA is characterized by a lightweight unsupervised training, requiring eight times fewer training samples than CsiNetPro.

cs.IT↗

arXiv2023

Overhead-Free Blockage Detection and Precoding Through Physics-Based Graph Neural Networks: LIDAR Data Meets Ray Tracing

In this letter, we address blockage detection and precoder design for multiple-input multiple-output (MIMO) links, without communication overhead required. Blockage detection is achieved by classifying light detection and ranging (LIDAR) data through a physics-based graph neural network (GNN). For precoder design, a preliminary channel estimate is obtained by running ray tracing on a 3D surface obtained from LIDAR data. This estimate is successively refined and the precoder is designed accordingly. Numerical simulations show that blockage detection is successful with 95% accuracy. Our digital precoding achieves 90% of the capacity and analog precoding outperforms previous works exploiting LIDAR for precoder design.

cs.IT↗

arXiv2022

Learning Representations for CSI Adaptive Quantization and Feedback

In this work, we propose an efficient method for channel state information (CSI) adaptive quantization and feedback in frequency division duplexing (FDD) systems. Existing works mainly focus on the implementation of autoencoder (AE) neural networks (NNs) for CSI compression, and consider straightforward quantization methods, e.g., uniform quantization, which are generally not optimal. With this strategy, it is hard to achieve a low reconstruction error, especially, when the available number of bits reserved for the latent space quantization is small. To address this issue, we recommend two different methods: one based on a post training quantization and the second one in which the codebook is found during the training of the AE. Both strategies achieve better reconstruction accuracy compared to standard quantization techniques.

eess.SP↗

arXiv2021

5G Network Slicing for Wi-Fi Networks

Future networks will pave the way for a myriad of applications with different requirements and Wi-Fi will play an important role in local area networks. This is why network slicing is proposed by 5G networks, allowing to offer multiple logical networks tailored to the different user requirements, over a common infrastructure. However, this is not supported by current Wi-Fi networks. In this paper, we propose a standard-compliant network slicing approach for the radio access segment of Wi-Fi by defining multiple Service Set Identifiers (SSIDs) per Access Point (AP). We present two algorithms, one that assigns resources according to the requirements of slices in a static way, and another that dynamically configures the slices according to the network's conditions and relevant Key Performance Indicators (KPIs). The proposed algorithms were validated through extensive simulations, conducted in the ns-3 network simulator, and complemented by theoretical assessments. The obtained results reveal that the two proposed slicing approaches outperform today's Wi-Fi access technique, reaching lower error probability for bandwidth intensive slices and lower latency for time-critical slices. Simultaneously, the proposed approach is up to 32 times more energy efficient, when considering slices tailored for low-power and low-bandwidth devices, while increasing the overall spectrum efficiency.

cs.NI↗