arXiv subjects

Matteo Pierno

Publications and source records attributed to Matteo Pierno.

16 recordsLinked to original sources

arXiv2023

Emulsions in microfluidic channels with asymmetric boundary conditions and directional surface roughness: stress and rheology

The flow of emulsions in confined microfluidic channels is affected by surface roughness. Directional roughness effects have recently been reported in channels with asymmetric boundary conditions featuring a flat wall, and a wall textured with a directional roughness, the latter promoting a change in the velocity profiles when the flow direction of emulsions is inverted [D. Filippi et al., Adv. Mater. Technol. 8, 2201748 (2023)]. An operative protocol is needed to reconstruct the stress profile inside the channel from velocity data to shed light on the trigger of the directional response. To this aim, we performed lattice Boltzmann numerical simulations of the flow of model emulsions with a minimalist model of directional roughness in two dimensions: a confined microfluidic channel with one flat wall and the other patterned by right-angle triangular-shaped posts. Simulations are essential to develop the protocol based on mechanical arguments to reconstruct stress profiles. Hence, one can analyze data to relate directional effects in velocity profiles to different rheological responses close to the rough walls associated with opposite flow directions. We finally show the universality of this protocol by applying it to other realizations of directional roughness by considering experimental data on emulsions in a microfluidic channel featured with a flat wall and a wall textured by herringbone-shaped roughness.

physics.flu-dyn↗

arXiv2016

Fluidization and wall slip of soft-glassy materials by controlled surface roughness

The motion of soft-glassy materials (SGM) in a confined geometry is strongly impacted by surface roughness. However, the effect of the spatial distribution of the roughness remains poorly understood from a more quantitative viewpoint. Here we present a comprehensive study of concentrated emulsions flowing in microfluidic channels, one wall of which is patterned with micron-size equally spaced grooves oriented perpendicularly to the flow direction. We show that roughness-induced fluidization can be quantitatively tailored by systematically changing both the width and separation of the grooves. We find that a simple scaling law describes such fluidization as a function of the density of grooves, suggesting common scenarios for droplet trapping and release. Numerical simulations confirm these views and are used to elucidate the relation between fluidization and the rate of plastic rearrangements.

cond-mat.soft↗

arXiv2016

Droplet breakup driven by shear thinning solutions in a microfluidic T-Junction

Droplet-based microfluidics turned out to be an efficient and adjustable platform for digital analysis, encapsulation of cells, drug formulation, and polymerase chain reaction. Typically, for most biomedical applications, the handling of complex, non-Newtonian fluids is involved, e.g. synovial and salivary fluids, collagen, and gel scaffolds. In this study we investigate the problem of droplet formation occurring in a microfluidic T-shaped junction, when the continuous phase is made of shear thinning liquids. At first, we review in detail the breakup process providing extensive, side-by-side comparisons between Newtonian and non-Newtonian liquids over unexplored ranges of flow conditions and viscous responses. The non-Newtonian liquid carrying the droplets is made of Xanthan solutions, a stiff rod-like polysaccharide displaying a marked shear thinning rheology. By defining an effective Capillary number, a simple yet effective methodology is used to account for the shear-dependent viscous response occurring at the breakup. The droplet size can be predicted over a wide range of flow conditions simply by knowing the rheology of the bulk continuous phase. Experimental results are complemented with numerical simulations of purely shear thinning fluids using Lattice Boltzmann models. The good agreement between the experimental and numerical data confirm the validity of the proposed rescaling with the effective Capillary number.

cond-mat.soft↗

arXiv2016

Stretching of viscoelastic drops by steady sliding

The sliding of non-Newtonian drops down planar surfaces results in a complex, entangled balance between interfacial forces and non linear viscous dissipation, which has been scarcely inspected. In particular, a detailed understanding of the role played by the polymer flexibility and the resulting elasticity of the polymer solution is still lacking. To this aim, we have considered polyacrylamide (PAA) solutions of different molecular weights, suspended either in water or glycerol/water mixtures. In contrast to drops with stiff polymers, drops with flexible polymers exhibit a remarkable elongation in steady sliding. This difference is most likely attributed to different viscous bending as a consequence of different shear thinning. Moreover, an "optimal elasticity" of the polymer seems to be required for this drop elongation to be visible. We have complemented experimental results with numerical simulations of a viscoelastic FENE-P drop. This has been a decisive step to unravel how a change of the elastic parameters (e.g. polymer relaxation time, maximum extensibility) affects the dimensionless sliding velocity.

cond-mat.soft↗

arXiv2016

Single-file escape of colloidal particles from microfluidic channels

Single-file diffusion is a ubiquitous physical process exploited by living and synthetic systems to exchange molecules with their environment. It is paramount quantifying the escape time needed for single files of particles to exit from constraining synthetic channels and biological pores. This quantity depends on complex cooperative effects, whose predominance can only be established through a strict comparison between theory and experiments. By using colloidal particles, optical manipulation, microfluidics, digital microscopy and theoretical analysis we uncover the self-similar character of the escape process and provide closed-formula evaluations of the escape time. We find that the escape time scales inversely with the diffusion coefficient of the last particle to leave the channel. Importantly, we find that at the investigated {\bf microscale}, bias forces as tiny as $10^{-15}\;{\rm N}$ determine the magnitude of the escape time by drastically reducing interparticle collisions. Our findings provide crucial guidelines to optimize the design of micro- and nano-devices for a variety of applications including drug delivery, particle filtering and transport in geometrical constrictions.

cond-mat.soft↗

arXiv2016

Deviation of viscous drops at chemical steps

We present systematic wetting experiments and numerical simulations of gravity driven liquid drops sliding on a plane substrate decorated with a linear chemical step. Surprisingly, the optimal direction to observe crossing is not the one perpendicular to the step, but a finite angle that depends on the material parameters. We computed the landscapes of the force acting on the drop by means of a contact line mobility model showing that contact angle hysteresis dominates the dynamics at the step and determines whether the drop passes onto the lower substrate. This analysis is very well supported by the experimental dynamic phase diagram in terms of pinning, crossing, sliding and sliding followed by pinning.

physics.flu-dyn↗

arXiv2015

Sliding droplets of Xanthan solutions: a joint experimental and numerical study

We have investigated the sliding of droplets made of solutions of Xanthan, a stiff rodlike polysaccharide exhibiting a non-newtonian behavior, notably characterized by a shear-rate dependence of the viscosity. These experimental results are quantitatively compared with those of newtonian fluids (water). The impact of the non-newtonian behavior on the sliding process was shown through the relation between the average dimensionless velocity (i.e. the Capillary number) and the dimensionless volume forces (i.e. the Bond number). To this aim, it is needed to define operative strategies to compute the Capillary number for the shear thinning fluids and compare with the corresponding newtonian case. Results from experiments were complemented with lattice Boltzmann numerical simulations of sliding droplets, aimed to disentangle the influence that non-newtonian flow properties have on the sliding.

cond-mat.soft↗

arXiv2015

Frictional Transition from Superlubric Islands to Pinned Monolayers

The inertial sliding of physisorbed submonolayer islands on crystal surfaces contains unexpected information on the exceptionally incommensurate smooth sliding state associated with superlubricity and on the mechanisms of its disappearance. Here we show in a joint quartz crystal microbalance (QCM) and molecular dynamics (MD) simulation case study of Xe on Cu(111) how superlubricity emerges in the large size limit of naturally incommensurate Xe islands. Theory also predicts, as coverage approaches a full monolayer, an abrupt adhesion-driven 2D density compression of order several %, implying here a hysteretic jump from superlubric free islands to a pressurized commensurate immobile monolayer. This scenario is fully supported by QCM data showing remarkably large slip times at increasing submonolayer coverages, signaling superlubricity, followed by a dramatic drop to zero for the dense commensurate monolayer. Careful analysis of this variety of island sliding phenomena will be mandatory in future applications of friction of crystal-adsorbate interfaces.

cond-mat.mes-hall↗

arXiv2014

Generation of water-in-oil and oil-in-water microdroplets in polyester-toner microfluidic devices

This paper demonstrates that disposable polyester-toner microfluidic devices are suitable to produce either water-in-oil (W/O) or oil-in-water (O/W) droplets without using any surface treatment of the microchannels walls. Highly monodisperse W/O and O/W emulsions were generated in T-junction microdevices by simply adding appropriate surfactants to the continuous phase. The dispersion in size of droplets generated at frequencies up to 500 Hz was always less than about 2% over time intervals of a couple of hours.

cond-mat.mtrl-sci↗

arXiv2014

Active Brownian Particles Escaping a Channel in Single File

Active particles may happen to be confined in channels so narrow that they cannot overtake each other (Single File conditions). This interesting situation reveals nontrivial physical features as a consequence of the strong inter-particle correlations developed in collective rearrangements. We consider a minimal model for active Brownian particles with the aim of studying the modifications introduced by activity with respect to the classical (passive) Single File picture. Depending on whether their motion is dominated by translational or rotational diffusion, we find that active Brownian particles in Single File may arrange into clusters which are continuously merging and splitting ({\it active clusters}) or merely reproduce passive-motion paradigms, respectively. We show that activity convey to self-propelled particles a strategic advantage for trespassing narrow channels against external biases (e.g., the gravitational field).

cond-mat.stat-mech↗

arXiv2013

Stick-Slip Sliding of Water Drops on Chemically Heterogeneous Surfaces

We present a comprehensive study of water drops sliding down chemically heterogeneous surfaces formed by a periodic pattern of alternating hydrophobic and hydrophilic stripes. Drops are found to undergo a stick-slip motion whose average speed is an order of magnitude smaller than that measured on a homogeneous surface having the same static contact angle. This motion is the result of the periodic deformations of the drop interface when crossing the stripes. Numerical simulations confirm this view and are used to elucidate the principles underlying the experimental observations.

cond-mat.soft↗

arXiv2010

Brambilla, et al. Reply

Brambilla, et al. Reply: van Megen and Williams (vMW) question our recent claim that dense colloidal hard spheres enter at large volume fraction ϕa dynamical regime not observed in earlier work and not described by the mode-coupling theory (MCT) of the glass transition.

cond-mat.soft↗

arXiv2009

Probing the equilibrium dynamics of colloidal hard spheres above the mode-coupling glass transition

We use dynamic light scattering and computer simulations to study equilibrium dynamics and dynamic heterogeneity in concentrated suspensions of colloidal hard spheres. Our study covers an unprecedented density range and spans seven decades in structural relaxation time, $\ta$, including equilibrium easurements above $ϕ_{\rm c}$, the location of the glass transition deduced from fitting our data to mode-coupling theory. Instead of falling out of equilibrium, the system remains ergodic above $ϕ_{\rm c}$ and enters a new dynamical regime where $\ta$ increases with a functional form that was not anticipated by previous experiments, while the amplitude of dynamic heterogeneity grows slower than a power law with $\ta$, as found in molecular glass-formers close to the glass transition.

cond-mat.soft↗

arXiv2009

Dynamic light scattering measurements in the activated regime of dense colloidal hard spheres

We use dynamic light scattering and numerical simulations to study the approach to equilibrium and the equilibrium dynamics of systems of colloidal hard spheres over a broad range of density, from dilute systems up to very concentrated suspensions undergoing glassy dynamics. We discuss several experimental issues (sedimentation, thermal control, non-equilibrium aging effects, dynamic heterogeneity) arising when very large relaxation times are measured. When analyzed over more than seven decades in time, we find that the equilibrium relaxation time, tau_alpha, of our system is described by the algebraic divergence predicted by mode-coupling theory over a window of about three decades. At higher density, tau_alpha increases exponentially with distance to a critical volume fraction phi_0 which is much larger than the mode-coupling singularity. This is reminiscent of the behavior of molecular glass-formers in the activated regime. We compare these results to previous work, carefully discussing crystallization and size polydispersity effects. Our results suggest the absence of a genuine algebraic divergence of tau_alpha in colloidal hard spheres.

cond-mat.soft↗

arXiv2005

Direct experimental evidence of a growing length scale accompanying the glass transition

Understanding glass formation is a challenge because the existence of a true glass state, distinct from liquid and solid, remains elusive: Glasses are liquids that have become too viscous to flow. An old idea, as yet unproven experimentally, is that the dynamics becomes sluggish as the glass transition approaches because increasingly larger regions of the material have to move simultaneously to allow flow. We introduce new multipoint dynamical susceptibilities to estimate quantitatively the size of these regions and provide direct experimental evidence that the glass formation of molecular liquids and colloidal suspensions is accompanied by growing dynamic correlation length scales.

cond-mat.stat-mech↗

arXiv2005

Aging and ultra-slow equilibration in concentrated colloidal hard spheres

We study the dynamic behaviour of concentrated colloidal hard spheres using Time Resolved Correlation, a light scattering technique that can detect the slow evolution of the dynamics in out-of-equilibrium systems. Surprisingly, equilibrium is reached a very long time after sample initialization, the non-stationary regime lasting up to three orders of magnitude more than the relaxation time of the system. Before reaching equilibrium, the system displays unusual aging behaviour. The intermediate scattering function decays faster than exponentially and its relaxation time evolves non-monotonically with sample age.

cond-mat.soft↗