arXiv subjects

Matthew Brahlek

Publications and source records attributed to Matthew Brahlek.

At least 37 records · Page 2Linked to original sources

arXiv2024

Stoichiometry-induced ferromagnetism in altermagnetic candidate MnTe

The field of spintronics has seen a surge of interest in altermagnetism due to novel predictions and many possible applications. MnTe is a leading altermagnetic candidate that is of significant interest across spintronics due to its layered antiferromagnetic structure, high Neel temperature (TN ~ 310 K) and semiconducting properties. We present results on molecular beam epitaxy (MBE) grown MnTe/InP(111) films. Here, it is found that the electronic and magnetic properties are driven by the natural stoichiometry of MnTe. Electronic transport and in situ angle-resolved photoemission spectroscopy show the films are natively metallic with the Fermi level in the valence band and the band structure is in good agreement with first principles calculations for altermagnetic spin-splitting. Neutron diffraction confirms that the film is antiferromagnetic with planar anisotropy and polarized neutron reflectometry indicates weak ferromagnetism, which is linked to a slight Mn-richness that is intrinsic to the MBE grown samples. When combined with the anomalous Hall effect, this work shows that the electronic response is strongly affected by the ferromagnetic moment. Altogether, this highlights potential mechanisms for controlling altermagnetic ordering for diverse spintronic applications.

cond-mat.mtrl-sci↗

arXiv2024

Interfacially enhanced superconductivity in Fe(Te,Se)/Bi4Te3 heterostructures

Realizing topological superconductivity by integrating high-transition-temperature ($T_C$) superconductors with topological insulators can open new paths for quantum computing applications. Here, we report a new approach for increasing the superconducting transition temperature ($T_{C}^{onset}$) by interfacing the unconventional superconductor Fe(Te,Se) with the topological insulator Bi-Te system in the low-Se doping regime, near where superconductivity vanishes in the bulk. The critical finding is that the $T_{C}^{onset}$ of Fe(Te,Se) increases from nominally non-superconducting to as high as 12.5 K when $Bi_2Te_3$ is replaced with the topological phase $Bi_4Te_3$. Interfacing Fe(Te,Se) with $Bi_4Te_3$ is also found to be critical for stabilizing superconductivity in monolayer films where $T_{C}^{onset}$ can be as high as 6 K. Measurements of the electronic and crystalline structure of the $Bi_4Te_3$ layer reveal that a large electron transfer, epitaxial strain, and novel chemical reduction processes are critical factors for the enhancement of superconductivity. This novel route for enhancing $T_C$ in an important epitaxial system provides new insight on the nature of interfacial superconductivity and a platform to identify and utilize new electronic phases.

cond-mat.supr-con↗

arXiv2024

Buffer-layer-controlled Nickeline vs Zinc-Blende/Wurtzite-type MnTe growths on c-plane Al2O3 substrates

In the recent past, MnTe has proven to be a crucial component of the intrinsic magnetic topological insulator (IMTI) family [MnTe]m[Bi2Te3]n, which hosts a wide range of magneto-topological properties depending on the choice of m and n. However, bulk crystal growth allows only a few combinations of m and n for these IMTIs due to the strict limitations of the thermodynamic growth conditions. One way to overcome this challenge is to utilize atomic layer-by-layer molecular beam epitaxy (MBE) technique, which allows arbitrary sequences of [MnTe]m and [Bi2Te3]n to be formed beyond the thermodynamic limit. For such MBE growth, finding optimal growth templates and conditions for the parent building block, MnTe, is a key requirement. Here, we report that two different hexagonal phases of MnTe-nickeline (NC) and zinc-blende/wurtzite (ZB-WZ) structures, with distinct in-plane lattice constants of 4.20 +/- 0.04 A and 4.39 +/- 0.04 A, respectively-can be selectively grown on c-plane Al2O3 substrates using different buffer layers and growth temperatures. Moreover, we provide the first comparative studies of different MnTe phases using atomic-resolution scanning transmission electron microscopy and show that ZB and WZ-like stacking sequences can easily alternate between the two. Surprisingly, In2Se3 buffer layer, despite its lattice constant (4.02 A) being closer to that of the NC phase, fosters the ZB-WZ instead, whereas Bi2Te3, sharing the same lattice constant (4.39 A) with the ZB-WZ phase, fosters the NC phase. These discoveries suggest that lattice matching is not always the most critical factor determining the preferred phase during epitaxial growth. Overall, this will deepen our understanding of epitaxial growth modes for chalcogenide materials and accelerate progress toward new IMTI phases as well as other magneto-topological applications.

cond-mat.mtrl-sci↗

arXiv2024

Orbital degree of freedom in high entropy oxides

The spin, charge, and lattice degrees of freedom and their interplay in high entropy oxides were intensively investigated in recent years. However, how the orbital degree of freedom is affected by the extreme disorder in high entropy oxides hasn't been studied. In this work, using perovskite structured \textit{R}VO$_3$ as a materials playground, we report how the disorder arising from mixing different rare earth ions at the rare earth site affects the orbital ordering of V$^{3+}$ t$_{2g}$-electrons. Since each member of \textit{R}VO$_3$ crystallizes into the same orthorhombic \textit{Pbnm} structure, the configurational entropy should not be critical for the success synthesis of (\textit{R}$_1$,...,\textit{R}$_n$)VO$_3$. The spin and orbital ordering was studied by measuring magnetic properties and specific heat of single crystals. Rather than the number and type of rare earth ions, the average ionic radius and size variance are the key factors determining the spin and orbital order in (\textit{R}$_1$,...,\textit{R}$_n$)VO$_3$. When the size variance is small, the average ionic radius takes precedence in dictating spin and orbital order. Increasing size variance suppresses the G-type orbital order and C-type magnetic order but favors the C-OO/G-AF state and the spin-orbital entanglement. These findings suggest that the extreme disorder introduced by mixing multiple rare earth ions in high entropy perovskites might be employed to preserve the orbital degree of freedom to near the magnetic ordering temperature, which is necessary for the electronic driven orbital ordering in a Kugel-Khomskii compound.

cond-mat.mtrl-sci↗

arXiv2023

High-throughput combinatorial approach expedites the synthesis of a lead-free relaxor ferroelectric system

Developing novel lead-free ferroelectric materials is crucial for next-generation microelectronic technologies that are energy efficient and environment friendly. However, materials discovery and property optimization are typically time-consuming due to the limited throughput of traditional synthesis methods. In this work, we use a high-throughput combinatorial synthesis approach to fabricate lead-free ferroelectric superlattices and solid solutions of (Ba0.7Ca0.3)TiO3 (BCT) and Ba(Zr0.2Ti0.8)O3 (BZT) phases with continuous variation of composition and layer thickness. High-resolution X-ray diffraction (XRD) and analytical scanning transmission electron microscopy (STEM) demonstrate high film quality and well-controlled compositional gradients. Ferroelectric and dielectric property measurements identify the optimal property point achieved at the morphotropic phase boundary (MPB) with a composition of 48BZT-52BCT. Displacement vector maps reveal that ferroelectric domain sizes are tunable by varying {BCT-BZT}N superlattice geometry. This high-throughput synthesis approach can be applied to many other material systems to expedite new materials discovery and properties optimization, allowing for the exploration of a large area of phase space within a single growth.

cond-mat.mtrl-sci↗

arXiv2023

Ferroelectric Semimetals with $α$-Bi/SnSe van der Waals heterostructures and its Topological Currents

We show that proximity effects can be utilized to engineer van der Waals heterostructures (vd- WHs) displaying spin-ferroelectricity locking, where ferroelectricity and spin states are confined to different layers, but are correlated by means of proximity effects. Our findings are supported by first principles calculations in $α$-Bi/SnSe bilayers. We show that such systems support ferroelectrically switchable non-linear anomalous Hall effect originating from large Berry curvature dipoles as well as direct and inverse spin Hall effects with giant bulk spin-charge interconversion efficiencies. The giant efficiencies are consequences of the proximity-induced semimetallic nature of low energy electron states, which are shown to behave as two-dimensional pseudo-Weyl fermions by means of symmetry analysis, first principles calculations as well as direct angle-resolved photoemission spectroscopy measurements.

cond-mat.mtrl-sci↗

arXiv2023

Interplay between Topological States and Rashba States as Manifested on Surface Steps at Room Temperature

The unique spin texture of quantum states in topological materials underpins many proposed spintronic applications. However, realizations of such great potential are stymied by perturbations, such as temperature and local fields imposed by impurities and defects, that can render a promising quantum state uncontrollable. Here, we report room-temperature observation of interaction between Rashba states and topological surface states, which manifests unique spin textures controllable by layer thickness of thin films. Specifically, we combine scanning tunneling microscopy/spectroscopy with the first-principles theoretical calculation to find the robust Rashba states coexisting with topological surface states along the surface steps with characteristic spin textures in momentum space. The Rashba edge states can be switched off by reducing the thickness of a topological insulator Bi2Se3 to bolster their interaction with the hybridized topological surface states. The study unveils a manipulating mechanism of the spin textures at room temperature, reinforcing the necessity of thin film technology in controlling quantum states.

cond-mat.mes-hall↗

arXiv2023

Emergent magnetism with continuous control in the ultrahigh conductivity layered oxide PdCoO2

The current challenge to realizing continuously tunable magnetism lies in our inability to systematically change properties such as valence, spin, and orbital degrees of freedom as well as crystallographic geometry. Here, we demonstrate that ferromagnetism can be externally turned on with the application of low-energy helium implantation and subsequently erased and returned to the pristine state via annealing. This high level of continuous control is made possible by targeting magnetic metastability in the ultra-high conductivity, non-magnetic layered oxide PdCoO2 where local lattice distortions generated by helium implantation induce emergence of a net moment on the surrounding transition metal octahedral sites. These highly-localized moments communicate through the itinerant metal states which triggers the onset of percolated long-range ferromagnetism. The ability to continuously tune competing interactions enables tailoring precise magnetic and magnetotransport responses in an ultra-high conductivity film and will be critical to applications across spintronics.

cond-mat.mtrl-sci↗

arXiv2023

Thickness-dependent, tunable anomalous Hall effect in hydrogen-reduced PdCoO$_2$ thin films

It was recently reported that hydrogen-reduced PdCoO$_2$ films exhibit strong perpendicular magnetic anisotropy (PMA) with sign tunable anomalous Hall effect (AHE). Here, we provide extensive thickness-dependent study of this system, and show that the electronic and magnetic properties are strongly dependent on the thickness and annealing conditions. Below a critical thickness of 25 nm, AHE shows clear PMA with hysteresis, and its sign changes from positive to negative, and back to positive as the annealing temperature increases from 100 $^\circ$C to 400 $^\circ$C. Beyond the critical thickness, both PMA and AHE hysteresis disappear and the AHE sign remains positive regardless of the annealing parameters. Our results show that PMA may have a large role on AHE sign-tunability and that below the critical thickness, competition between different AHE mechanisms drives this sign change.

cond-mat.mtrl-sci↗

arXiv2023

Structural Anisotropy in Sb Thin Films

Sb thin films have attracted wide interests due to their tunable band structure, topological phases, and remarkable electronic properties. We successfully grow epitaxial Sb thin films on a closely lattice-matched GaSb(001) surface by molecular beam epitaxy. We find a novel anisotropic directional dependence of their structural, morphological, and electronic properties. The origin of the anisotropic features is elucidated using first-principles density functional theory (DFT) calculations. The growth regime of crystalline and amorphous Sb thin films was determined by mapping the surface reconstruction phase diagram of the GaSb(001) surface under Sb$_2$ flux, with confirmation of structural characterizations. Crystalline Sb thin films show a rhombohedral crystal structure along the rhombohedral (104) surface orientation parallel to the cubic (001) surface orientation of the GaSb substrate. At this coherent interface, Sb atoms are aligned with the GaSb lattice along the [1-10] crystallographic direction but are not aligned well along the [110] crystallographic direction, which results in anisotropic features in reflection high-energy electron diffraction patterns, surface morphology, and transport properties. Our DFT calculations show that the anisotropic features originate from the GaSb surface, where Sb atoms align with the Ga and Sb atoms on the reconstructed surface. The formation energy calculations confirm that the stability of the experimentally observed structures. Our results provide optimal film growth conditions for further studies of novel properties of Bi$_{1-x}$Sb$_x$ thin films with similar lattice parameters and an identical crystal structure as well as functional heterostructures of them with III-V semiconductor layers along the (001) surface orientation, supported by a theoretical understanding of the anisotropic film orientation.

cond-mat.mtrl-sci↗

arXiv2023

Observation of 2D Weyl Fermion States in Epitaxial Bismuthene

A two-dimensional (2D) Weyl semimetal featuring a spin-polarized linear band dispersion and a nodal Fermi surface is a new topological phase of matter. It is a solid-state realization of Weyl fermions in an intrinsic 2D system. The nontrivial topology of 2D Weyl cones guarantees the existence of a new form of topologically protected boundary states, Fermi string edge states. In this work, we report the realization of a 2D Weyl semimetal in monolayer-thick epitaxial bismuthene grown on SnS(Se) substrate. The intrinsic band gap of bismuthene is eliminated by the space-inversion-symmetry-breaking substrate perturbations, resulting in a gapless spin-polarized Weyl band dispersion. The linear dispersion and spin polarization of the Weyl fermion states are observed in our spin and angle-resolved photoemission measurements. In addition, the scanning tunneling microscopy/spectroscopy reveals a pronounced local density of states at the edge, suggesting the existence of Fermi string edge states. These results open the door for the experimental exploration of the exotic properties of Weyl fermion states in reduced dimensions.

cond-mat.mtrl-sci↗

arXiv2022

What is in a Name: Defining -High Entropy- Oxides

High entropy oxides are emerging as an exciting new avenue to design highly tailored functional behaviors that have no traditional counterparts. Study and application of these materials are bringing together scientists and engineers from physics, chemistry, and materials science. The diversity of each of these disciplines comes with perspectives and jargon that may be confusing to those outside of the individual fields, which can result in miscommunication of important aspects of research. In this perspective, we provide examples of research and characterization taken from these different fields to provide a framework for classifying the differences between compositionally complex oxides, high entropy oxides, and entropy stabilized oxides, which is intended to bring a common language to this emerging area. We highlight the critical importance of understanding a materials crystallinity, composition, and mixing length scales in determining its true definition.

cond-mat.mtrl-sci↗

arXiv2022

Diffusion-assisted molecular beam epitaxy of CuCrO$_2$ thin films

Using molecular beam epitaxy (MBE) to grow multi-elemental oxides (MEO) is generally challenging, partly due to difficulty in stoichiometry control. Occasionally, if one of the elements is volatile at the growth temperature, stoichiometry control can be greatly simplified using adsorption-controlled growth mode. Otherwise, stoichiometry control remains one of the main hurdles to achieving high quality MEO film growths. Here, we report another kind of self-limited growth mode, dubbed diffusion-assisted epitaxy, in which excess species diffuses into the substrate and leads to the desired stoichiometry, in a manner similar to the conventional adsorption-controlled epitaxy. Specifically, we demonstrate that using diffusion-assisted epitaxy, high-quality epitaxial CuCrO$_2$ films can be grown over a wide growth window without precise flux control using MBE.

cond-mat.mtrl-sci↗

arXiv2022

Monolayer superconductivity and tunable topological electronic structure at the Fe(Te,Se)/Bi2Te3 interface

The interface between two-dimensional topological Dirac states and an s-wave superconductor is expected to support Majorana bound states that can be used for quantum computing applications. Realizing these novel states of matter and their applications requires control over superconductivity and spin-orbit coupling to achieve spin-momentum locked topological surface states which are simultaneously superconducting. While signatures of Majorana bound states have been observed in the magnetic vortex cores of bulk FeTe0.55Se0.45, inhomogeneity and disorder from doping makes these signatures unclear and inconsistent between vortices. Here we report superconductivity in monolayer FeTe1-ySey (Fe(Te,Se)) grown on Bi2Te3 by molecular beam epitaxy. Spin and angle resolved photoemission spectroscopy directly resolve the interfacial spin and electronic structure of Fe(Te,Se)/Bi2Te3 heterostructures. We find that for y = 0.25 the Fe(Te,Se) electronic structure overlaps with the topological Bi2Te3 interfacial states which disrupts the desired spin-momentum locking. In contrast, for y = 0.1 a smaller Fe(Te,Se) Fermi surface allows for clear spin-momentum locking observed in the topological states. Hence, we demonstrate the Fe(Te,Se)/Bi2Te3 system is a highly tunable platform for realizing Majorana bound states where reduced doping can improve characteristics important for Majorana interrogation and potential applications.

cond-mat.supr-con↗

arXiv2022

Superconducting four-fold Fe(Te,Se) film on six-fold magnetic MnTe via hybrid symmetry epitaxy

Epitaxial Fe(Te,Se) thin films have been grown on various substrates but never been realized on magnetic layers. Here we report the epitaxial growth of four-fold Fe(Te,Se) film on a six-fold antiferromagnetic insulator, MnTe. The Fe(Te,Se)/MnTe heterostructure shows a clear superconducting transition at around 11 K and the critical magnetic field measurement suggests the origin of the superconductivity to be bulk-like. Structural characterizations suggest that the uniaxial lattice match between Fe(Te,Se) and MnTe allows a hybrid symmetry epitaxy mode, which was recently discovered between Fe(Te,Se) and Bi2Te3. Furthermore, Te/Fe flux ratio during deposition of the Fe(Te,Se) layer is found to be critical for its superconductivity. Now that superconducting Fe(Te,Se) can be grown on two related hexagonal platforms, Bi2Te3 and MnTe, this result opens a new possibility of combining topological superconductivity of Fe(Te,Se) with the rich physics in the intrinsic magnetic topological materials (MnTe)n(Bi2Te3)m family.

cond-mat.supr-con↗

arXiv2022

Identifying Majorana vortex modes via non-local transport

The combination of two-dimensional Dirac surface states with s-wave superconductivity is expected to generate localized topological Majorana zero modes in vortex cores. Putative experimental signatures of these modes have been reported for heterostructures of proximitized topological insulators, iron-based superconductors or certain transition metal dichalcogenides. Despite these efforts, the Majorana nature of the observed excitation is still under debate. We propose to identify the presence of Majorana vortex modes using a nonlocal transport measurement protocol originally employed for one-dimensional settings. In the case of an isolated subgap state, the protocol provides a spatial map of the ratio of local charge- and probability-density which offers a clear distinction between Majorana and ordinary fermionic modes. We show that these distinctive features survive in the experimentally relevant case of hybridizing vortex core modes.

cond-mat.mes-hall↗

arXiv2022

Surface-Driven Evolution of the Anomalous Hall Effect in Magnetic Topological Insulator MnBi2Te4 Thin Films

Understanding the effects of interfacial modification to the functional properties of magnetic topological insulator thin films is crucial for developing novel technological applications from spintronics to quantum computing. Here, we report that a large electronic and magnetic response is induced in the intrinsic magnetic topological insulator MnBi2Te4 by controlling the propagation of surface oxidation. We show that the formation of the surface oxide layer is confined to the top 1-2 unit cells but drives large changes in the overall magnetic response. Specifically, we observe a dramatic reversal of the sign of the anomalous Hall effect driven by finite thickness magnetism, which indicates that the film splits into distinct magnetic layers each with a unique electronic signature. These data reveal a delicate dependence of the overall magnetic and electronic response of MnBi2Te4 on the stoichiometry of the top layers. Our study suggests that perturbations resulting from surface oxidation may play a non-trivial role in the stabilization of the quantum anomalous Hall effect in this system and that understanding targeted modifications to the surface may open new routes for engineering novel topological and magnetic responses in this fascinating material.

cond-mat.mtrl-sci↗

arXiv2022

Phonon Chirality Induced by Vibronic-Orbital Coupling

The notion that phonons can carry pseudo-angular momentum has become popular in the last decade, with recent research efforts highlighting phonon chirality, Berry curvature of phonon band structure, and the phonon Hall effect. When a phonon is resonantly coupled to a crystal electric field excitation, a so-called vibronic bound state forms. Here, we observe angular momentum transfer of $δ$Jz = $\pm$1$\hbar$ between phonons and an orbital state in a vibronic bound state of a candidate quantum spin liquid. This observation has profound implications for the engineering of phonon band structure topology through chiral quasiparticle interactions.

cond-mat.mes-hall↗