arXiv subjects

Matthew C. Valenti

Publications and source records attributed to Matthew C. Valenti.

At least 55 records · Page 3Linked to original sources

arXiv2015

Analysis of Millimeter Wave Networked Wearables in Crowded Environments

The millimeter wave (mmWave) band has the potential to provide high throughput among wearable devices. When mmWave wearable networks are used in crowded environments, such as on a bus or train, antenna directivity and orientation hold the key to achieving Gbps rates. Previous work using stochastic geometry often assumes an infinite number of interfering nodes drawn from a Poisson Point Process (PPP). Since indoor wearable networks will be isolated due to walls, a network with a finite number of nodes may be a more suitable model. In this paper, we characterize the significant sources of interference and develop closed-form expressions for the spatially averaged performance of a typical user's wearable communication link. The effect of human body blockage on the mmWave signals and the role of network density are investigated to show that an increase in interferer density reduces the mean number of significant interferers.

cs.IT↗

arXiv2015

Unicast Barrage Relay Networks: Outage Analysis and Optimization

Barrage relays networks (BRNs) are ad hoc networks built on a rapid cooperative flooding primitive as opposed to the traditional point-to-point link abstraction. Controlled barrage regions (CBRs) can be used to contain this flooding primitive for unicast and multicast, thereby enabling spatial reuse. In this paper, the behavior of individual CBRs is described as a Markov process that models the potential cooperative relay transmissions. The outage probability for a CBR is found in closed form for a given topology, and the probability takes into account fading and co-channel interference (CCI) between adjacent CBRs. Having adopted this accurate analytical framework, this paper proceeds to optimize a BRN by finding the optimal size of each CBR, the number of relays contained within each CBR, the optimal relay locations when they are constrained to lie on a straight line, and the code rate that maximizes the transport capacity.

cs.NI↗

arXiv2015

Performance Comparisons of Geographic Routing Protocols in Mobile Ad Hoc Networks

Geographic routing protocols greatly reduce the requirements of topology storage and provide flexibility in the accommodation of the dynamic behavior of mobile ad hoc networks. This paper presents performance evaluations and comparisons of two geographic routing protocols and the popular AODV protocol. The tradeoffs among the average path reliabilities, average conditional delays, average conditional numbers of hops, and area spectral efficiencies and the effects of various parameters are illustrated for finite ad hoc networks with randomly placed mobiles. This paper uses a dual method of closed-form analysis and simple simulation that is applicable to most routing protocols and provides a much more realistic performance evaluation than has previously been possible. Some features included in the new analysis are shadowing, exclusion and guard zones, distance-dependent fading, and interference correlation.

cs.IT↗

arXiv2015

Performance Analysis of Fifth-Generation Cellular Uplink

Fifth-generation cellular networks are expected to exhibit at least three primary physical-layer differences relative to fourth-generation ones: millimeter-wave propagation, antenna-array directionality, and densification of base stations. In this paper, the effects of these differences on the performance of single-carrier frequency-domain multiple-access uplink systems with frequency hopping are assessed. A new analysis, which is much more detailed than any other in the existing literature and accommodates actual base-station topologies, captures the primary features of uplink communications. Distance-dependent power-law, shadowing, and fading models based on millimeter-wave measurements are introduced. The beneficial effects of base-station densification, highly directional sectorization, and frequency hopping are illustrated.

cs.IT↗

arXiv2015

Computationally Aware Sum-Rate Optimal Scheduling for Centralized Radio Access Networks

In a centralized or cloud radio access network, certain portions of the digital baseband processing of a group of several radio access points are executed at a central data center. Centralizing the processing improves the flexibility, scalability, and utilization of computational assets. However, the performance depends critically on how the limited data processing resources are allocated to serve the needs of the different wireless devices. As the processing load imposed by each device depends on its allocated transmission rate and channel quality, the rate-allocation aspect of the scheduling should take into account the available computing. In this paper, two computationally aware schedulers are proposed that have the objective of maximizing the sum-rate of the system while satisfying a constraint on the offered computational load. The first scheduler optimally allocates resources and is implemented according to a water-filling algorithm. The second scheduler is suboptimal, but uses a simpler and intuitive complexity-cut-off approach. The performance of both schedulers is evaluated using an LTE-compliant system level simulator. It is found that both schedulers avoid outages that are caused by an overflow of computational load (i.e., computational outages) at the cost of a slight loss of sum-rate.

cs.NI↗

arXiv2015

Optimization of an Adaptive Frequency-Hopping Network

This paper proposes a methodology for optimizing a frequency-hopping network that uses continuous-phase frequency-shift keying and adaptive capacity-approaching channel coding. The optimization takes into account the spatial distribution of the interfering mobiles, Nakagami fading, and lognormal shadowing. It includes the effects of both co-channel interference and adjacent-channel interference, which arises due to spectral-splatter effects. The average network performance depends on the choice of the modulation index, the number of frequency-hopping channels, and the fractional in-band power, which are assumed to be fixed network parameters. The performance of a given transmission depends on the code rate, which is adapted in response to the interference to meet a constraint on outage probability. The optimization proceeds by choosing a set of fixed network parameters, drawing the interferers from the spatial distribution, and determining the maximum rate that satisfies the outage constraint. The process is repeated for a large number of network realizations, and the fixed network parameters that maximize the area spectral efficiency are identified.

cs.IT↗

arXiv2015

The Complexity-Rate Tradeoff of Centralized Radio Access Networks

In a centralized RAN, the signals from multiple RAPs are processed centrally in a data center. Centralized RAN enables advanced interference coordination strategies while leveraging the elastic provisioning of data processing resources. It is particularly well suited for dense deployments, such as within a large building where the RAPs are connected via fibre and many cells are underutilized. This paper considers the computational requirements of centralized RAN with the goal of illuminating the benefits of pooling computational resources. A new analytical framework is proposed for quantifying the computational load associated with the centralized processing of uplink signals in the presence of block Rayleigh fading, distance-dependent path-loss, and fractional power control. Several new performance metrics are defined, including computational outage probability, outage complexity, computational gain, computational diversity, and the complexity-rate tradeoff. The validity of the analytical framework is confirmed by comparing it numerically with a simulator compliant with the 3GPP LTE standard. Using the developed metrics, it is shown that centralizing the computing resources provides a higher net throughput per computational resource as compared to local processing.

cs.IT↗

arXiv2015

Adjacent-Channel Interference in Frequency-Hopping Ad Hoc Networks

This paper considers ad hoc networks that use the combination of coded continuous-phase frequency-shift keying (CPFSK) and frequency-hopping multiple access. Although CPFSK has a compact spectrum, some of the signal power inevitably splatters into adjacent frequency channels, thereby causing adjacent-channel interference (ACI). The amount of ACI is controlled by setting the fractional in-band power; i.e., the fraction of the signal power that lies within the band of each frequency channel. While this quantity is often selected arbitrarily, a tradeoff is involved in the choice. This paper presents a new analysis of frequency-hopping ad hoc networks that carefully incorporates the effect of ACI. The analysis accounts for the shadowing, Nakagami fading, CPFSK modulation index, code rate, number of frequency channels, fractional in-band power, and spatial distribution of the interfering mobiles. Expressions are presented for both outage probability and transmission capacity. With the objective of maximizing the transmission capacity, the optimal fractional in-band power that should be contained in each frequency channel is identified.

cs.IT↗

arXiv2015

LDPC Code Design for Noncoherent Physical Layer Network Coding

This work considers optimizing LDPC codes in the physical-layer network coded two-way relay channel using noncoherent FSK modulation. The error-rate performance of channel decoding at the relay node during the multiple-access phase was improved through EXIT-based optimization of Tanner graph variable node degree distributions. Codes drawn from the DVB-S2 and WiMAX standards were used as a basis for design and performance comparison. The computational complexity characteristics of the standard codes were preserved in the optimized codes by maintaining the extended irregular repeat-accumulate (eIRA). The relay receiver performance was optimized considering two modulation orders M = {4, 8} using iterative decoding in which the decoder and demodulator refine channel estimates by exchanging information. The code optimization procedure yielded unique optimized codes for each case of modulation order and available channel state information. Performance of the standard and optimized codes were measured using Monte Carlo simulation in the flat Rayleigh fading channel, and error rate improvements up to 1.2 dB are demonstrated depending on system parameters.

cs.IT↗

arXiv2014

Performance Analysis of Geographic Routing Protocols in Ad Hoc Networks

Geographic routing protocols greatly reduce the requirements of topology storage and provide flexibility in the accommodation of the dynamic behavior of ad hoc networks. This paper presents performance evaluations and comparisons of two geographic routing protocols and the popular AODV protocol. The trade-offs among the average path reliabilities, average conditional delays, average conditional number of hops, and area spectral efficiencies and the effects of various parameters are illustrated for finite ad hoc networks with randomly placed mobiles. This paper uses a dual method of closed-form analysis and simple simulation that is applicable to most routing protocols and provides a much more realistic performance evaluation than has previously been possible. Some features included in the new analysis are shadowing, exclusion and guard zones, and distance-dependent fading.

cs.NI↗

arXiv2014

Distributed Estimation of a Parametric Field: Algorithms and Performance Analysis

This paper presents a distributed estimator for a deterministic parametric physical field sensed by a homogeneous sensor network and develops a new transformed expression for the Cramer-Rao lower bound (CRLB) on the variance of distributed estimates. The proposed transformation reduces a multidimensional integral representation of the CRLB to an expression involving an infinite sum. Stochastic models used in this paper assume additive noise in both the observation and transmission channels. Two cases of data transmission are considered. The first case assumes a linear analog modulation of raw observations prior to their transmission to a fusion center. In the second case, each sensor quantizes its observation to $M$ levels, and the quantized data are communicated to a fusion center. In both cases, parallel additive white Gaussian channels are assumed. The paper develops an iterative expectation-maximization (EM) algorithm to estimate unknown parameters of a parametric field, and its linearized version is adopted for numerical analysis. The performance of the developed numerical solution is compared to the performance of a simple iterative approach based on Newton's approximation. While the developed solution has a higher complexity than Newton's solution, it is more robust with respect to the choice of initial parameters and has a better estimation accuracy. Numerical examples are provided for the case of a field modeled as a Gaussian bell, and illustrate the advantages of using the transformed expression for the CRLB. However, the distributed estimator and the derived CRLB are general and can be applied to any parametric field. The dependence of the mean-square error (MSE) on the number of quantization levels, the number of sensors in the network and the SNR of the observation and transmission channels are analyzed. The variance of the estimates is compared to the derived CRLB.

cs.IT↗

arXiv2014

Adaptive Content Control for Communication amongst Cooperative Automated Vehicles

Cooperative automated vehicles exchange information to assist each other in creating a more precise and extended view of their surroundings, with the aim of improving automated-driving decisions. This paper addresses the need for scalable communication among these vehicles. To this end, a general communication framework is proposed through which automated cars exchange information derived from multi-resolution maps created using their local sensing modalities. This method can extend the region visible to a car beyond the area directly sensed by its own sensors. An adaptive, probabilistic, distance-dependent strategy is proposed that controls the content of the messages exchanged among vehicles based on performance measures associated with the load on the communication channel.

cs.NI↗

arXiv2014

The Role of Computational Outage in Dense Cloud-Based Centralized Radio Access Networks

Centralized radio access network architectures consolidate the baseband operation towards a cloud-based platform, thereby allowing for efficient utilization of computing assets, effective inter-cell coordination, and exploitation of global channel state information. This paper considers the interplay between computational efficiency and data throughput that is fundamental to centralized RAN. It introduces the concept of computational outage in mobile networks, and applies it to the analysis of complexity constrained dense centralized RAN networks. The framework is applied to single-cell and multi-cell scenarios using parameters drawn from the LTE standard. It is found that in computationally limited networks, the effective throughput can be improved by using a computationally aware policy for selecting the modulation and coding scheme, which sacrifices spectral efficiency in order to reduce the computational outage probability. When signals of multiple base stations are processed centrally, a computational diversity benefit emerges, and the benefit grows with increasing user density.

cs.NI↗

arXiv2014

A Direct Approach to Computing Spatially Averaged Outage Probability

This letter describes a direct method for computing the spatially averaged outage probability of a network with interferers located according to a point process and signals subject to fading. Unlike most common approaches, it does not require transforms such as a Laplace transform. Examples show how to directly obtain the outage probability in the presence of Rayleigh fading in networks whose interferers are drawn from binomial and Poisson point processes defined over arbitrary regions. We furthermore show that, by extending the arbitrary region to the entire plane, the result for Poisson point processes converges to the same expression found by Baccelli et al..

cs.IT↗

arXiv2014

Effects of Spatial Randomness on Locating a Point Source with Distributed Sensors

Most studies that consider the problem of estimating the location of a point source in wireless sensor networks assume that the source location is estimated by a set of spatially distributed sensors, whose locations are fixed. Motivated by the fact that the observation quality and performance of the localization algorithm depend on the location of the sensors, which could be randomly distributed, this paper investigates the performance of a recently proposed energy-based source-localization algorithm under the assumption that the sensors are positioned according to a uniform clustering process. Practical considerations such as the existence and size of the exclusion zones around each sensor and the source will be studied. By introducing a novel performance measure called the estimation outage, it will be shown how parameters related to the network geometry such as the distance between the source and the closest sensor to it as well as the number of sensors within a region surrounding the source affect the localization performance.

cs.IT↗

arXiv2014

An Accurate and Efficient Analysis of a MBSFN Network

A new accurate analysis is presented for an OFDM-based multicast-broadcast single-frequency network (MBSFN). The topology of the network is modeled by a constrained random spatial model involving a fixed number of base stations placed over a finite area with a minimum separation. The analysis is driven by a new closed-form expression for the conditional outage probability at each location of the network, where the conditioning is with respect to the network realization. The analysis accounts for the diversity combining of signals transmitted by different base stations of a given MBSFN area, and also accounts for the interference caused by the base stations of other MBSFN areas. The analysis features a flexible channel model, accounting for path loss, Nakagami fading, and correlated shadowing. The analysis is used to investigate the influence of the minimum base-station separation and provides insight regarding the optimal size of the MBSFN areas. In order to highlight the percentage of the network that will fail to successfully receive the broadcast, the area below an outage threshold (ABOT) is here used and defined as the fraction of the network that provides an outage probability (averaged over the fading) that meets a threshold.

cs.IT↗

arXiv2014

Optimal Power Allocation for Distributed BLUE Estimation with Linear Spatial Collaboration

This paper investigates the problem of linear spatial collaboration for distributed estimation in wireless sensor networks. In this context, the sensors share their local noisy (and potentially spatially correlated) observations with each other through error-free, low cost links based on a pattern defined by an adjacency matrix. Each sensor connected to a central entity, known as the fusion center (FC), forms a linear combination of the observations to which it has access and sends the resulting signal to the FC through an orthogonal fading channel. The FC combines these received signals to find the best linear unbiased estimator of the vector of unknown signals observed by individual sensors. The main novelty of this paper is the derivation of an optimal power-allocation scheme in which the coefficients used to form linear combinations of noisy observations at the sensors connected to the FC are optimized. Through this optimization, the total estimation distortion at the FC is minimized, given a constraint on the maximum cumulative transmit power in the entire network. Numerical results show that even with a moderate connectivity across the network, spatial collaboration among sensors significantly reduces the estimation distortion at the FC.

cs.IT↗

arXiv2013

Limited-Feedback-Based Channel-Aware Power Allocation for Linear Distributed Estimation

This paper investigates the problem of distributed best linear unbiased estimation (BLUE) of a random parameter at the fusion center (FC) of a wireless sensor network (WSN). In particular, the application of limited-feedback strategies for the optimal power allocation in distributed estimation is studied. In order to find the BLUE estimator of the unknown parameter, the FC combines spatially distributed, linearly processed, noisy observations of local sensors received through orthogonal channels corrupted by fading and additive Gaussian noise. Most optimal power-allocation schemes proposed in the literature require the feedback of the exact instantaneous channel state information from the FC to local sensors. This paper proposes a limited-feedback strategy in which the FC designs an optimal codebook containing the optimal power-allocation vectors, in an iterative offline process, based on the generalized Lloyd algorithm with modified distortion functions. Upon observing a realization of the channel vector, the FC finds the closest codeword to its corresponding optimal power-allocation vector and broadcasts the index of the codeword. Each sensor will then transmit its analog observations using its optimal quantized amplification gain. This approach eliminates the requirement for infinite-rate digital feedback links and is scalable, especially in large WSNs.

cs.IT↗