arXiv subjects

Matthew G. Hennessy

Publications and source records attributed to Matthew G. Hennessy.

At least 19 recordsLinked to original sources

arXiv2026

Modelling flow-driven pore closure of weakening poroelastic media

Poroelastic materials, such as polymer tissue scaffolds, porous rocks, and hydrogels, can weaken due to interactions between the solid skeleton and chemical species in the interstitial fluid. We develop a mathematical model for a poroelastic material to provide fundamental mechanistic insight into how weakening the material can affect the time-varying mechanics of the system. Our model couples large-deformation poroelasticity with an advection-diffusion equation for the solute. Furthermore, we introduce a decay equation for the material stiffness, whose rate of decay depends on the solute concentration. In this way, we describe a three-way coupling between poroelastic deformation, weakening of the skeleton and transport of solute through the material. We exploit numerical and analytical techniques to reveal the flow-driven uniaxial compression of a weakening poroelastic material and determine parameter regimes for which weakening the material facilitates pore closure at the downstream boundary. We identify parameter regimes in which (1) a steady state is attained without pore closure, (2) pore closure occurs at a finite time or (3) the pores close instantaneously; we uncover case (2) through the introduction of weakening into the system. We provide insights into the relationship between the differing behaviours and the separation between the timescales of the system. For systems with slow weakening, we derive a leading-order approximation for the time of pore closure, treating the ratio of the timescales of poroelastic relaxation and weakening as a small parameter, and investigate the accuracy of this approximation and the new behaviours that arise when these timescales become comparable.

physics.flu-dyn↗

arXiv2026

Bulldozing an immersed granular material in a confined channel

The motion of an immersed granular material in a channel is characterised by complex interactions among the grains, between the grains and the permeating liquid, and between the grains and the channel walls. Here, we develop a reduced-order continuum model for the bulldozing of an immersed, sedimented granular material by a piston in a channel. In our continuum approach, the granular pile and the overlying fluid layer evolve as a system of coupled thin films. We model the granular phase as a dense, porous, visco-plastic material that experiences Coulomb-like friction with the walls. Conservation of mass and momentum under a thin-film approximation leads to an elliptic equation for the velocity of the grains that is coupled with an evolution equation for the height of the granular pile. We solve our model numerically for a variety of different scenarios to explore the interactions between wall friction, internal viscous-like stresses, and fluid flow above and through the pile. We complement our numerical results with a series of experiments that provide insight into the validity and limitations of the model.

cond-mat.soft↗

arXiv2026

A nonlinear beam model for photoresponsive thermoelastic solids driven by localised heating

Asymptotic methods are used to derive a geometrically nonlinear beam model for thermoelastic solids with a spatially localised heat source. The asymptotic reduction is based on collapsing the heated region to a point. Away from the point of heating, the governing equations reduce to a pair of beam equations with nonlinear von Kármán strains. The effects of the localised heat source are captured through asymptotically consistent jump conditions that hold at the point of heating. The model accounts for changes in beam length due to longitudinal thermal expansion and bending moments produced by transverse thermal gradients. The model is used to study light-induced actuation of photoresponsive hydrogel beams with localised heating arising from laser irradiation. Two loading scenarios are considered. In the first, the ends of the beam are assumed to be free, resulting in a V-shaped deformation upon heating. An analytical expression for the fold angle of the V is provided. In the second, the beam is assumed to be in a pre-buckled configuration due to clamped end conditions. The critical conditions leading to light-driven snap-through are calculated. Offsetting the laser from the mid-point of the beam is found to inhibit the onset of snap through.

physics.class-ph↗

arXiv2026

Snap-through time of arches is controlled by slenderness and imperfections

Snap-through occurs in elastic structures when a stable equilibrium configuration becomes unstable, resulting in rapid motion towards a new and distinct stable state. While static analyses of snap-through are well documented, the dynamics of snap-through remain under-explored, particularly in structures with natural curvature. Using a combination of finite element simulations and multiple-scales analysis, we show that the snap-through dynamics of an arch under a central point load are controlled by its slenderness and imperfections embedded in the system. As the slenderness increases, the snap-through dynamics slow down, and the mode of snap-through changes from limit-point buckling to bifurcation buckling. When bifurcation buckling occurs, snap-through is preceded by an extended period of oscillatory behaviour. The duration of these pre-snap-through oscillations, and hence the snap-through time, is entirely controlled by imperfections in the system. Increasing the strength of imperfections dramatically reduces the snap-through time. Analytical expressions for the snap-through times are presented for limit point and bifurcation buckling. Our work suggests that natural curvature and deliberately introduced imperfections can be used to tune the snap-through dynamics of new functional materials.

cond-mat.soft↗

arXiv2025

A microstructural model of transversely isotropic, fibre-reinforced hydrogels

Fibre-reinforced hydrogels are promising materials for biomedical applications due to their strength, toughness, and tunability. However, it remains unclear how to design fibre-reinforced hydrogels for use in specific applications due to the lack of a flexible modelling framework that can predict and hence optimise their behaviour. In this paper, we present a microstructural model for transversely isotropic fibre-reinforced hydrogels that captures the specific geometry of the fibre network. The model also accounts for slack in the initial fibre network that is gradually removed upon deformation. The mechanical model for the fibre network is coupled to a nonlinear poroelastic model for the hydrogel matrix that accounts for osmotic stress. By comparing the model predictions to data from unconfined compression experiments, we show that the model can capture J-shaped stress-strain curves and time-dependent creep responses. We showcase how the model can be used to guide the design of materials for artificial cartilage by exploring how to maximise interstitial fluid pressure. We find that fluid pressurisation can be increased by using stiffer fibres, removing slack from the fibre network, and reducing the Young's modulus of the hydrogel matrix. Finally, a high-level and open-source Python package has been developed for simulating unconfined compression experiments using the model.

cond-mat.soft↗

arXiv2022

Time-dependent modelling of thin poroelastic films drying on deformable plates

Understanding the generation of mechanical stress in drying, particle-laden films is important for a wide range of industrial processes. The cantilever experiment allows the stress in a drying film that has been deposited onto a thin plate to be quantified. Mechanical stresses in the film are transmitted to the plate and drive bending. Mathematical modelling enables the film stress to be inferred from measurements of the plate deflection. The aim of this paper is to present simplified models of the cantilever experiment that have been derived from the time-dependent equations of continuum mechanics using asymptotic methods. The film is described using nonlinear poroelasticity and the plate using nonlinear elasticity. In contrast to Stoney-like formulae, the simplified models account for films with non-uniform thickness and stress. The film model reduces to a single differential equation that can be solved independently of the plate equations. The plate model reduces to an extended form of the Foppl-von Karman (FvK) equations that accounts for gradients in the longitudinal traction acting on the plate surface. Consistent boundary conditions for the FvK equations are derived by resolving the Saint-Venant boundary layers at the free edges of the plate. The asymptotically reduced models are in excellent agreement with finite element solutions of the full governing equations. As the Péclet number increases, the time evolution of the plate deflection changes from $t$ to $t^{1/2}$, in agreement with experiments.

physics.class-ph↗

arXiv2022

Fluid-fluid phase separation in a soft porous medium

Various biological and chemical processes lead to the nucleation and growth of non-wetting fluid bubbles within the pore space of a granular medium, such as the formation of gas bubbles in liquid-saturated lake-bed sediments. In sufficiently soft porous materials, the non-wetting nature of these bubbles can result in the formation of open cavities within the granular solid skeleton. Here, we consider this process through the lens of phase separation, where thermomechanics govern the separation of the non-wetting phase from a fluid-fluid-solid mixture. We construct a phase-field model informed by large-deformation poromechanics, in which two immiscible fluids interact with a poroelastic solid skeleton. Our model captures the competing effects of elasticity and fluid-fluid-solid interactions. We use a phase-field damage model to capture the mechanics of the granular solid. As a model problem, we consider an initial distribution of non-wetting fluid in the pore space that separates into multiple cavities. We use simulations and linear-stability analysis to identify the key parameters that control phase separation, the conditions that favour the formation of cavities, and the characteristic size of the resulting cavities.

cond-mat.soft↗

arXiv2022

Drying-induced stresses in poroelastic drops on rigid substrates

We develop a theory for drying-induced stresses in sessile, poroelastic drops undergoing evaporation on rigid surfaces. Using a lubrication-like approximation, the governing equations of three-dimensional nonlinear poroelasticity are reduced to a single thin-film equation for the drop thickness. We find that thin drops experience compressive elastic stresses but the total in-plane stresses are tensile. The mechanical response of the drop is dictated by the initial profile of the solid skeleton, which controls the in-plane deformation, the dominant components of elastic stress, and sets a limit on the depth of delamination that can potentially occur. Our theory suggests that the alignment of desiccation fractures in colloidal drops is selected by the shape of the drop at the point of gelation. We propose that the emergence of three distinct fracture patterns in dried blood drops is a consequence of a non-monotonic drop profile at gelation. We also show that depletion fronts, which separate wet and dry solid, can invade the drop from the contact line and localise the generation of mechanical stress during drying. Finally, the finite element method is used to explore the stress profiles in drops with large contact angles.

cond-mat.soft↗

arXiv2022

Optimal loading of hydrogel-based drug-delivery systems

Drug-loaded hydrogels provide a means to deliver pharmaceutical agents to specific sites within the body at a controlled rate. The aim of this paper is to understand how controlled drug release can be achieved by tuning the initial distribution of drug molecules in a hydrogel. A mathematical model is presented for a spherical drug-loaded hydrogel. The model captures the nonlinear elasticity of the polymer network and thermodynamics of swelling. By assuming that the drug molecules are dilute, the equations for hydrogel swelling and drug transport partially decouple. A fast optimisation method is developed to accurately compute the optimal initial drug concentration by minimising the error between the numerical drug-release profile and a target profile. By taking the target drug efflux to be piecewise constant, the optimal initial configuration consists of a central drug-loaded core with isolated drug packets near the free boundary of the hydrogel. The optimal initial drug concentration is highly effective at mitigating the burst effect, where a large amount of drug is rapidly released into the environment. The hydrogel stiffness can be used to further tune the rate of drug release. Although stiffer gels lead to less swelling and hence reduce the drug diffusivity, the drug-release kinetics are faster than for soft gels due to the decreased distance that drug molecules must travel to reach the free surface.

math.OC↗

arXiv2022

The electric double layer at the interface between a polyelectrolyte gel and salt bath

The electric double layer (EDL) that forms at the interface between a polyelectrolyte gel and a salt bath is studied using asymptotic and numerical methods. Specifically, matched asymptotic expansions, based on the smallness of the Debye length relative to the typical gel dimensions, are used to construct solutions of the governing equations and derive electroneutral models with consistent jump conditions across the gel-bath interface. A general approach for solving the equations of incompressible nonlinear elasticity in a curved boundary layer is developed and used to resolve the gel mechanics in the EDL. A critical feature of the model is that it accounts for phase separation within the gel, which gives rise to diffuse interfaces with a characteristic thickness described by the Kuhn length. We show that the solutions of the electroneutral model can only be asymptotically matched to the solutions in the EDL, in general, when the Kuhn length greatly exceeds the Debye length. Conversely, if the Debye length is similar to or larger than the Kuhn length, then the entire gel can self-organise into periodic, electrically charged domains via phase separation. The breakdown of electroneutrality demonstrates that the commonly invoked electroneutral assumption must be used with caution, as it generally only applies when the Debye length is much smaller than the Kuhn length.

cond-mat.soft↗

arXiv2021

A kinetic model of a polyelectrolyte gel undergoing phase separation

In this study we use non-equilibrium thermodynamics to systematically derive a phase-field model of a polyelectrolyte gel coupled to a hydrodynamic model for a salt solution surrounding the gel. The governing equations for the gel account for the free energy of the internal interfaces which form upon phase separation, the nonlinear elasticity of the polyelectrolyte network, and multi-component diffusive transport following a Stefan--Maxwell approach. The time-dependent model describes the evolution of the gel across multiple time and spatial scales and so is able to capture the large-scale solvent flux and the emergence of long-time pattern formation in the system. We explore the model for the case of a constrained gel undergoing uni-axial deformations. Numerical simulations show that rapid changes in the gel volume occur once the volume phase transition sets in, as well as the triggering of spinodal decomposition that leads to strong inhomogeneities in the lateral stresses, potentially leading to experimentally visible patterns.

cond-mat.soft↗

arXiv2021

The dynamics of a collapsing polyelectrolyte gel

We analyse the dynamics of different routes to collapse of a constrained polyelectrolyte gel in contact with an ionic bath. The evolution of the gel is described by a model that incorporates non-linear elasticity, Stefan-Maxwell diffusion and interfacial gradient free energy to account for phase separation of the gel. A bifurcation analysis of the homogeneous equilibrium states reveals three solution branches at low ion concentrations in the bath, giving way to only one above a critical ion concentration. We present numerical solutions that capture both the spatial heterogeneity and the multiple time-scales involved in the process of collapse. These solutions are complemented by two analytical studies. Firstly, a phase-plane analysis that reveals the existence of a depletion front for the transition from the highly swollen to the new collapsed equilibrium state. This depletion front is initiated after the fast ionic diffusion has set the initial condition for this time regime. Secondly, we perform a linear stability analysis about the homogeneous states that show that for a range of ion concentrations in the bath, spinodal decomposition of the swollen state gives rise to localized solvent-rich(poor) and, due to the electro-neutrality condition, ion-poor(rich) phases that coarsen on the route to collapse. This dynamics of a collapsing polyelectrolyte gel has not been described before.

cond-mat.soft↗

arXiv2019

Host-virus evolutionary dynamics with specialist and generalist infection strategies: bifurcations, bistability and chaos

In this work we have investigated the evolutionary dynamics of a generalist pathogen, e.g. a virus population, that evolves towards specialisation in an environment with multiple host types. We have particularly explored under which conditions generalist viral strains may rise in frequency and coexist with specialist strains or even dominate the population. By means of a nonlinear mathematical model and bifurcation analysis, we have determined the theoretical conditions for stability of nine identified equilibria and provided biological interpretation in terms of the infection rates for the viral specialist and generalist strains. By means of a stability diagram we identified stable fixed points and stable periodic orbits, as well as regions of bistability. For arbitrary biologically feasible initial population sizes, the probability of evolving towards stable solutions is obtained for each point of the analyzed parameter space. This probability map shows combinations of infection rates of the generalist and specialist strains that might lead to equal chances for each type becoming the dominant strategy. Furthermore, we have identified infection rates for which the model predicts the onset of chaotic dynamics. Several degenerate Bogdanov-Takens and zero-Hopf bifurcations are detected along with generalized Hopf and zero-Hopf bifurcations. This manuscript provides additional insights into the dynamical complexity of host-pathogen evolution towards different infection strategies.

math.DS↗

arXiv2019

Asymptotic reduction, solution, and homogenisation of a thermo-electrochemical model for a lithium-ion battery

We study two thermo-electrochemical models for lithium-ion batteries. The first is based on volume averaging the electrode microstructure whereas the second is based on the pseudo-two-dimensional (P2D) approach which treats the electrode as a collection of spherical particles. A scaling analysis is used to reduce the volume-averaged model and show that the electrochemical reactions are the dominant source of heat. Matched asymptotic expansions are used to compute solutions of the volume-averaged model for the cases of constant applied current, oscillating applied current, and constant cell potential. The asymptotic and numerical solutions of the volume-averaged model are in remarkable agreement with numerical solutions of the thermal P2D model for (dis)charge rates up to 2C, and reasonable agreement is found at 4C. Homogenisation is then used to derive a thermal model for a battery consisting of several connected lithium-ion cells. Despite accounting for the Arrhenius dependence of the reaction coefficients, we show that thermal runaway does not occur in the model. Instead, the cell potential is simply pushed closer to the open-circuit potential. We also show that in many cases, the homogenised battery model can be solved analytically, making it ideal for use in on-board thermal management systems.

physics.app-ph↗

arXiv2019

Asymptotic reduction of a porous electrode model for lithium-ion batteries

We present a porous electrode model for lithium-ion batteries using Butler--Volmer reaction kinetics. We model lithium concentration in both the solid and fluid phase along with solid and liquid electric potential. Through asymptotic reduction, we show that the electric potentials are spatially homogeneous which decouples the problem into a series of time-dependent problems. These problems can be solved on three distinguished time scales, an early time scale where capacitance effects in the electrode dominate, a mid-range time scale where a spatial concentration gradient forms in the electrolyte, and a long-time scale where each of the electrodes saturate and deplete with lithium respectively. The solid-phase concentration profiles are linear functions of time and the electrolyte potential is everywhere zero, which allows the model to be reduced to a system of two uncoupled ordinary differential equations. Analytic and numerical results are compared with full numerical simulations and experimental discharge curves demonstrating excellent agreement.

physics.app-ph↗

arXiv2019

The one-dimensional Stefan problem with non-Fourier heat conduction

We investigate the one-dimensional growth of a solid into a liquid bath, starting from a small crystal, using the Guyer-Krumhansl and Maxwell-Cattaneo models of heat conduction. By breaking the solidification process into the relevant time regimes we are able to reduce the problem to a system of two coupled ordinary differential equations describing the evolution of the solid-liquid interface and the heat flux. The reduced formulation is in good agreement with numerical simulations. In the case of silicon, differences between classical and non-classical solidification kinetics are relatively small, but larger deviations can be observed in the evolution in time of the heat flux through the growing solid. From this study we conclude that the heat flux provides more information about the presence of non-classical modes of heat transport during phase-change processes.

cond-mat.mes-hall↗

arXiv2019

The Stefan problem with variable thermophysical properties and phase change temperature

In this paper we formulate a Stefan problem appropriate when the thermophysical properties are distinct in each phase and the phase-change temperature is size or velocity dependent. Thermophysical properties invariably take different values in different material phases but this is often ignored for mathematical simplicity. Size and velocity dependent phase change temperatures are often found at very short length scales, such as nanoparticle melting or dendrite formation; velocity dependence occurs in the solidification of supercooled melts. To illustrate the method we show how the governing equations may be applied to a standard one-dimensional problem and also the melting of a spherically symmetric nanoparticle. Errors which have propagated through the literature are highlighted. By writing the system in non-dimensional form we are able to study the large Stefan number formulation and an energy-conserving one-phase reduction. The results from the various simplifications and assumptions are compared with those from a finite difference numerical scheme. Finally, we briefly discuss the failure of Fourier's law at very small length and time-scales and provide an alternative formulation which takes into account the finite time of travel of heat carriers (phonons) and the mean free distance between collisions.

physics.comp-ph↗

arXiv2018

Modelling ultra-fast nanoparticle melting with the Maxwell-Cattaneo equation

The role of thermal relaxation in nanoparticle melting is studied using a mathematical model based on the Maxwell--Cattaneo equation for heat conduction. The model is formulated in terms of a two-phase Stefan problem. We consider the cases of the temperature profile being continuous or having a jump across the solid-liquid interface. The jump conditions are derived from the sharp-interface limit of a phase-field model that accounts for variations in the thermal properties between the solid and liquid. The Stefan problem is solved using asymptotic and numerical methods. The analysis reveals that the Fourier-based solution can be recovered from the classical limit of zero relaxation time when either boundary condition is used. However, only the jump condition avoids the onset of unphysical `supersonic' melting, where the speed of the melt front exceeds the finite speed of heat propagation. These results conclusively demonstrate that the jump condition, not the continuity condition, is the most suitable for use in models of phase change based on the Maxwell--Cattaneo equation. Numerical investigations show that thermal relaxation can increase the time required to melt a nanoparticle by more than a factor of ten. Thus, thermal relaxation is an important process to include in models of nanoparticle melting and is expected to be relevant in other rapid phase-change processes.

cond-mat.mes-hall↗