arXiv subjects

Matthew J. West

Publications and source records attributed to Matthew J. West.

At least 19 recordsLinked to original sources

arXiv2026

Energy Evolution from the Chromosphere to the Heliosphere in the 2021 October 28 Solar Eruption

We perform a detailed study of the energetics for a well-observed solar eruption and flare that occurred on 28 October 2021. This event included a GOES class X1.0 flare, a global EUV wave, and a coronal mass ejection that reached speeds of >2000 km/s. The event was observed from a variety of spacecraft in NASA's Heliophysics System Observatory, including multiple missions near Earth, STEREO-A off the Sun-Earth line, and Solar Orbiter, near the Sun-Earth line at about 0.8 au. Using remote sensing, in situ observations, and in some cases scaling laws based on previous observations, we characterize the following quantities: free magnetic energy, energy in non-thermal electrons, energy in non-thermal ions, bolometric energy, energy deposited in the chromosphere, thermal energy radiated in the flare loops, energy dissipated by the EUV wave, CME kinetic and gravitational potential energy, CME energy flux in the heliosphere, and the energy partition in the CME shock. We find that the total energy released during the event is consistent with estimates of the pre-event stored magnetic energy, and the CME kinetic + potential energy dominates the energy partition.

astro-ph.SR↗

arXiv2026

Polarimeter to Unify the Corona and Heliosphere (PUNCH)

The Polarimeter to Unify the Corona and Heliosphere (PUNCH) mission is a NASA Small Explorer to determine the cross-scale processes that unify the solar corona and heliosphere. PUNCH has two science objectives: (1) understand how coronal structures become the ambient solar wind, and (2) understand the dynamic evolution of transient structures, such as coronal mass ejections, in the young solar wind. To address these objectives, PUNCH uses a constellation of four small spacecraft in Sun-synchronous low Earth orbit, to collect linearly polarized images of the K corona and young solar wind. The four spacecraft each carry one visible-light imager in a 1+3 configuration: a single Narrow Field Imager solar coronagraph captures images of the outer corona at all position angles, and at solar elongations from 1.5 degrees (6 R$_\odot$) to 8 degrees (32 R$_\odot$); and three separate Wide Field Imager heliospheric imagers together capture views of the entire inner solar system, at solar elongations from 3 degrees (12 R$_\odot$) to 45 degrees (180 R$_\odot$) from the Sun. PUNCH images include linear-polarization data, to enable inferring the three-dimensional structure of visible features without stereoscopy. The instruments are matched in wavelength passband, support overlapping instantaneous fields of view, and are operated synchronously, to act as a single ``virtual instrument'' with a 90 degree wide field of view, centered on the Sun. PUNCH launched in March of 2025 and began science operations in June of 2025. PUNCH has an open data policy with no proprietary period, and PUNCH Science Team Meetings are open to all.

astro-ph.SR↗

arXiv2025

Evidence of Extreme Ultraviolet Resonant Excitation in the Middle Corona During A Solar Flare

We present observations of an eruptive solar flare on 2016 January 6 that occurred behind the solar limb from the perspective of the Earth, but was well observed by STEREO and the Solar Extreme Ultraviolet Monitor on the Mars Atmosphere and {Volatile} EvolutioN (MAVEN) mission. Light curves showing the evolution of the flare's irradiance as a function of time taken by MAVEN are well correlated with the brightness evolution of fan structures observed in the PROBA2 SWAP 174 Å passband, suggesting that the radiance of structures near the flare site was influenced by emission from the flare. Because SWAP did not directly observe the flare itself, this event represents a rare opportunity to study the evolution of emission near a flare without the risk of instrumental scattered light contaminating the observations. We analyze this evolution and implement a simple model to explore the possibility that resonant excitation (or resonant scattering) plays an important role in driving coronal EUV emission during flaring events. Our modeling shows that for a large flare, resonant excitation could increase emission from nearby structures by about 45%, consistent with our findings that the involved structures observed by SWAP increased in brightness by about 60% during the flare. We conclude that resonant excitation may play an important role in driving coronal EUV emission under certain circumstances and should be accounted for in models and emission-based analysis tools.

astro-ph.SR↗

arXiv2024

CATEcor: an Open Science, Shaded-Truss, Externally-Occulted Coronagraph

We present the design of a portable coronagraph, CATEcor, that incorporates a novel "shaded truss" style of external occultation and serves as a proof-of-concept for that family of coronagraphs. The shaded truss design style has the potential for broad application in various scientific settings. We conceived CATEcor itself as a simple instrument to observe the corona during the darker skies available during a partial solar eclipse, or for students or interested amateurs to detect the corona under ideal non-eclipsed conditions. CATEcor is therefore optimized for simplicity and accessibility to the public. It is implemented using an existing dioptric telescope and an adapter rig that mounts in front of the objective lens, restricting the telescope aperture and providing external occultation. The adapter rig, including occulter, is fabricated using fusion deposition modeling (FDM; colloquially "3D printing"), greatly reducing cost. The structure is designed to be integrated with moderate care and may be replicated in a university or amateur setting. While CATEcor is a simple demonstration unit, the design concept, process, and trades are useful for other more sophisticated coronagraphs in the same general family, which might operate under normal daytime skies outside the annular-eclipse conditions used for CATEcor.

astro-ph.IM↗

arXiv2024

Observations of the Polarized Solar Corona during the Annular Eclipse of October 14, 2023

We present results of a dual eclipse expedition to observe the solar corona from two sites during the annular solar eclipse of 2023 October 14, using a novel coronagraph designed to be accessible for amateurs and students to build and deploy. The coronagraph "CATEcor" builds on the standardized eclipse observing equipment developed for the Citizen CATE 2024 experiment. The observing sites were selected for likelihood of clear observations, for historic relevance (near the Climax site in the Colorado Rocky Mountains), and for centrality to the annular eclipse path (atop Sandia Peak above Albuquerque, New Mexico). The novel portion of CATEcor is an external occulter assembly that slips over the front of a conventional dioptric telescope, forming a "shaded-truss" externally occulted coronagraph. CATEcor is specifically designed to be easily constructed in a garage or "makerspace" environment. We successfully observed some bright features in the solar corona to an altitude of approximately 2.25 R$_\odot$ during the annular phases of the eclipse. Future improvements to the design, in progress now, will reduce both stray light and image artifacts; our objective is to develop a design that can be operated successfully by amateur astronomers at sufficient altitude even without the darkened skies of a partial or annular eclipse.

astro-ph.SR↗

arXiv2023

A Chromatic Treatment of Linear Polarization in the Solar Corona at the 2023 Total Solar Eclipse

The broadband solar K-corona is linearly polarized due to Thomson scattering. Various strategies have been used to represent coronal polarization. Here, we present a new way to visualize the polarized corona, using observations from the 2023 April 20 total solar eclipse in Australia in support of the Citizen CATE 2024 project. We convert observations in the common four-polarizer orthogonal basis (0°, 45°, 90°, & 135°) to -60°, 0°, and +60° (MZP) polarization, which is homologous to R, G, B color channels. The unique image generated provides some sense of how humans might visualize polarization if we could perceive it in the same way we perceive color.

physics.pop-ph↗

arXiv2023

High-fidelity 3D Reconstruction of Solar Coronal Physics with the Updated CROBAR Method

We present an extension of the Coronal Reconstruction Onto B-Aligned Regions (CROBAR) method to Linear Force Free Field (LFFF) extrapolations, and apply it to the reconstruction of a set of AIA, MDI, and STEREO EUVI data. The results demonstrate that CROBAR can not only reconstruct coronal emission structures, but also that it can help constrain the coronal field extrapolations via the LFFF's helicity $α$ parameter. They also provide a real-world example of how CROBAR can easily incorporate information from multiple perspectives to improve its reconstructions, and we also use the additional perspectives to help validate the reconstructions. We furthermore touch on the use of real-world emission passbands rather than idealized power-law type ones using DEMs. We conclude with a comparison of CROBAR generated emission to observed emission and those produced with idealized DEM based power-laws. These results further illustrate the promise of CROBAR for real-world applications, and we make available a preliminary release of the software available for download.

astro-ph.SR↗

arXiv2023

The Closest View of a Fast Coronal Mass Ejection: How Faulty Assumptions near Perihelion Lead to Unrealistic Interpretations of PSP/WISPR Observations

We report on the closest view of a coronal mass ejection observed by the Parker Solar Probe (PSP)/Wide-field Imager for {Parker} Solar PRobe (WISPR) instrument on September 05, 2022, when PSP was traversing from a distance of 15.3~to~13.5~R$_\odot$ from the Sun. The CME leading edge and an arc-shaped {\emph{concave-up} structure near the core} was tracked in WISPR~field of view using the polar coordinate system, for the first time. Using the impact distance on Thomson surface, we measured average speeds of CME leading edge and concave-up structure as $\approx$2500~$\pm$~270\,km\,s$^{-1}$ and $\approx$400~$\pm$~70\,km\,s$^{-1}$ with a deceleration of $\approx$20~m~s$^{-2}$ for the later. {The use of the plane-of-sky approach yielded an unrealistic speed of more than three times of this estimate.} We also used single viewpoint STEREO/COR-2A images to fit the Graduated Cylindrical Shell (GCS) model to the CME while incorporating the source region location from EUI of Solar Orbiter and estimated a 3D speed of $\approx$2700\,km\,s$^{-1}$. We conclude that this CME exhibits the highest speed during the ascending phase of solar cycle 25. This places it in the category of extreme speed CMEs, which account for only 0.15\% of all CMEs listed in the CDAW CME catalog.

astro-ph.SR↗

arXiv2023

The Critical Coronal Transition Region: A Physics-framed Strategy to Uncover the Genesis of the Solar Wind and Solar Eruptions

Our current theoretical and observational understanding suggests that critical properties of the solar wind and Coronal Mass Ejections (CMEs) are imparted within 10 Rs, particularly below 4 Rs. This seemingly narrow spatial region encompasses the transition of coronal plasma processes through the entire range of physical regimes from fluid to kinetic, and from primarily closed to open magnetic field structures. From a physics perspective, therefore, it is more appropriate to refer to this region as the Critical Coronal Transition Region (CCTR) to emphasize its physical, rather than spatial, importance to key Heliophysics science. This white paper argues that the comprehensive exploration of the CCTR will answer two of the most central Heliophysics questions, "How and where does the solar wind form?" and "How do eruptions form?", by unifying hardware/software/modeling development and seemingly disparate research communities and frameworks. We describe the outlines of decadal-scale plan to achieve that by 2050.

astro-ph.IM↗

arXiv2023

Magnetic Energy Powers the Corona: How We Can Understand its 3D Storage & Release

The coronal magnetic field is the prime driver behind many as-yet unsolved mysteries: solar eruptions, coronal heating, and the solar wind, to name a few. It is, however, still poorly observed and understood. We highlight key questions related to magnetic energy storage, release, and transport in the solar corona, and their relationship to these important problems. We advocate for new and multi-point co-optimized measurements, sensitive to magnetic field and other plasma parameters, spanning from optical to $γ$-ray wavelengths, to bring closure to these long-standing and fundamental questions. We discuss how our approach can fully describe the 3D magnetic field, embedded plasma, particle energization, and their joint evolution to achieve these objectives.

astro-ph.IM↗

arXiv2023

Improving Multi-Dimensional Data Formats, Access, and Assimilation Tools for the Twenty-First Century

Heliophysics image data largely relies on a forty-year-old ecosystem built on the venerable Flexible Image Transport System (FITS) data standard. While many in situ measurements use newer standards, they are difficult to integrate with multiple data streams required to develop global understanding. Additionally, most data users still engage with data in much the same way as they did decades ago. However, contemporary missions and models require much more complex support for 3D multi-parameter data, robust data assimilation strategies, and integration of multiple individual data streams required to derive complete physical characterizations of the Sun and Heliospheric plasma environment. In this white paper we highlight some of the 21$^\mathsf{st}$ century challenges for data frameworks in heliophysics, consider an illustrative case study, and make recommendations for important steps the field can take to modernize its data products and data usage models. Our specific recommendations include: (1) Investing in data assimilation capability to drive advanced data-constrained models, (2) Investing in new strategies for integrating data across multiple instruments to realize measurements that cannot be produced from single observations, (3) Rethinking old data use paradigms to improve user access, develop deep understanding, and decrease barrier to entry for new datasets, and (4) Investing in research on data formats better suited for multi-dimensional data and cloud-based computing.

astro-ph.IM↗

arXiv2023

COMPLETE: A flagship mission for complete understanding of 3D coronal magnetic energy release

COMPLETE is a flagship mission concept combining broadband spectroscopic imaging and comprehensive magnetography from multiple viewpoints around the Sun to enable tomographic reconstruction of 3D coronal magnetic fields and associated dynamic plasma properties, which provide direct diagnostics of energy release. COMPLETE re-imagines the paradigm for solar remote-sensing observations through purposefully co-optimized detectors distributed on multiple spacecraft that operate as a single observatory, linked by a comprehensive data/model assimilation strategy to unify individual observations into a single physical framework. We describe COMPLETE's science goals, instruments, and mission implementation. With targeted investment by NASA, COMPLETE is feasible for launch in 2032 to observe around the maximum of Solar Cycle 26.

astro-ph.IM↗

arXiv2023

The SWAP Filter: A Simple Azimuthally Varying Radial Filter for Wide-Field EUV Solar Images

We present the SWAP Filter: an azimuthally varying, radial normalizing filter specifically developed for EUV images of the solar corona, named for the Sun Watcher with Active Pixels and Image Processing (SWAP) instrument on the Project for On-Board Autonomy 2 spacecraft. We discuss the origins of our technique, its implementation and key user-configurable parameters, and highlight its effects on data via a series of examples. We discuss the filter's strengths in a data environment in which wide field-of-view observations that specifically target the low signal-to-noise middle corona are newly available and expected to grow in the coming years.

astro-ph.SR↗

arXiv2023

Defining the Middle Corona

The middle corona, the region roughly spanning heliocentric altitudes from $1.5$ to $6\,R_\odot$, encompasses almost all of the influential physical transitions and processes that govern the behavior of coronal outflow into the heliosphere. Eruptions that could disrupt the near-Earth environment propagate through it. Importantly, it modulates inflow from above that can drive dynamic changes at lower heights in the inner corona. Consequently, this region is essential for comprehensively connecting the corona to the heliosphere and for developing corresponding global models. Nonetheless, because it is challenging to observe, the middle corona has been poorly studied by major solar remote sensing missions and instruments, extending back to the Solar and Heliospheric Observatory (SoHO) era. Thanks to recent advances in instrumentation, observational processing techniques, and a realization of the importance of the region, interest in the middle corona has increased. Although the region cannot be intrinsically separated from other regions of the solar atmosphere, there has emerged a need to define the region in terms of its location and extension in the solar atmosphere, its composition, the physical transitions it covers, and the underlying physics believed to be encapsulated by the region. This paper aims to define the middle corona and give an overview of the processes that occur there.

astro-ph.SR↗

arXiv2023

Radio Studies of the Middle Corona: Current State and New Prospects in the Next Decade

The "middle corona," defined by West et al. (2022) as the region between ~1.5-6 solar radii, is a critical transition region that connects the highly structured lower corona to the outer corona where the magnetic field becomes predominantly radial. At radio wavelengths, remote-sensing of the middle corona falls in the meter-decameter wavelength range where a critical transition of radio emission mechanisms occurs. In addition, plasma properties of the middle corona can be probed by trans-coronal radio propagation methods including radio scintillation and Faraday rotation techniques. Together they offer a wealth of diagnostic tools for the middle corona, complementing current and planned missions at other wavelengths. These diagnostics include unique means for detecting and measuring the magnetic field and energetic electrons associated with coronal mass ejections, mapping coronal shocks and electron beam trajectories, as well as constraining the plasma density, magnetic field, and turbulence of the "young" solar wind. Following a brief overview of pertinent radio diagnostic methods, this white paper will discuss the current state of radio studies on the middle corona, challenges to obtaining a more comprehensive picture, and recommend an outlook in the next decade. Our specific recommendations for advancing the middle coronal sciences from the radio perspective are: (1) Prioritizing solar-dedicated radio facilities in the ~0.1-1 GHz range with broadband, high-dynamic-range imaging spectropolarimetry capabilities. (2) Developing facilities and techniques to perform multi-perspective, multiple lines-of-sight trans-coronal radio Faraday Rotation measurements.

astro-ph.IM↗

arXiv2021

Three-Polarizer Treatment of Linear Polarization in Coronagraphs and Heliospheric Imagers

Linear polarized light has been used to view the solar corona for over 150 years. While the familiar Stokes representation for polarimetry is complete, it is best matched to a laboratory setting and therefore is not the most convenient representation either for coronal instrument design or for coronal data analysis. Over the last 100 years of development of coronagraphs and heliospheric imagers, various representations have been used both for direct measurement and analysis. These systems include famous representations such as the (B, pB) system that is analogous to the Stokes system in solar observing coordinates, and also internal representations such as in-instrument Stokes parameters with fixed or variable "vertical" direction, and brightness values through a particular polarizing optic or set thereof. Many polarimetric instruments currently use a symmetric three-polarizer measurement and representation system, which we refer to as "(M, Z, P)", to derive the (B, pB) or Stokes parameters. We present a symmetric derivation of (B, pB) and Stokes parameters from (M, Z, P), analyze the noise properties of (M, Z, P) in the context of instrument design, develop (M, Z, P) as a useful intermediate system for data analysis including background subtraction, and draw a helpful analogy between linear polarimetric systems and the large existing body of work on photometric colorimetry.

astro-ph.IM↗

arXiv2021

SunCET: A compact EUV instrument to fill a critical observational gap

The Sun Coronal Ejection Tracker (SunCET) is an extreme ultraviolet imager and spectrograph instrument concept for tracking coronal mass ejections through the region where they experience the majority of their acceleration: the difficult-to-observe middle corona. It contains a wide field of view (0-4~\Rs) imager and a 1~Å spectral-resolution-irradiance spectrograph spanning 170-340~Å. It leverages new detector technology to read out different areas of the detector with different integration times, resulting in what we call "simultaneous high dynamic range", as opposed to the traditional high dynamic range camera technique of subsequent full-frame images that are then combined in post-processing. This allows us to image the bright solar disk with short integration time, the middle corona with a long integration time, and the spectra with their own, independent integration time. Thus, SunCET does not require the use of an opaque or filtered occulter. SunCET is also compact -- $\sim$15 $\times$ 15 $\times$ 10~cm in volume -- making it an ideal instrument for a CubeSat or a small, complementary addition to a larger mission. Indeed, SunCET is presently in a NASA-funded, competitive Phase A as a CubeSat and has also been proposed to NASA as an instrument onboard a 184 kg Mission of Opportunity.

astro-ph.SR↗

arXiv2020

Automated Detection of Accelerating Solar Eruptions using Parabolic Hough Transform

Solar eruptions such as Coronal Mass Ejections (CMEs) observed in the inner solar corona (up to 4 R$_{\odot}$) show acceleration profiles which appear as parabolic ridges in height-time plots. Inspired by the white-light automated detection algorithms, Computer Aided CME Tracking System (CACTus) and Solar Eruptive Events Detection System (SEEDS), we employ the parabolic Hough Transform for the first time to automatically detect off-disk solar eruptions {from height-time plots. Due to the limited availability of white-light observations in the inner corona, we use Extreme UltraViolet (EUV) images of the Sun. In this paper we present a new algorithm, CME Identification in Inner Solar Corona (CIISCO), which is based on Fourier motion filtering and the parabolic Hough transform, and demonstrate its implementation using EUV observations taken from {\it Atmospheric Imaging Assembly} (AIA) on-board the Solar Dynamics Observatory (SDO), {\it Extreme Ultra Violet Imager} (EUVI) on-board the STEREO-A and B satellites, and {\it Sun Watcher using Active Pixel System detector and Image Processing} (SWAP) Imager on-board PROBA2. We show that CIISCO is able to identify any {off-disk} outward moving feature in EUV images. The use of automated detection algorithms, like CIISCO, can potentially be used to provide early warnings of CMEs if an EUV telescope is located at $\pm$ 90$^{\circ}$ from the Sun-Earth line, providing CME characteristics and kinematics close to the Sun. This paper also presents the limitations of this algorithm and the prospects for future improvement.

astro-ph.SR↗