arXiv subjects

Matthew Kokshoorn

Publications and source records attributed to Matthew Kokshoorn.

9 recordsLinked to original sources

arXiv2019

Extended Kalman Filter Beam Tracking for Millimeter Wave Vehicular Communications

Millimeter-wave (mmWave) communication is a promising technology to meet the ever-growing data traffic of vehicular communications. Unfortunately, more frequent channel estimations are required in this spectrum due to the narrow beams employed to compensate for the high path loss. Hence, the development of highly efficient beam tracking algorithms is essential to enable the technology, particularly for fast-changing environments in vehicular communications. In this paper, we propose an innovative scheme for beam tracking based on the Extended Kalman Filter (EKF), improving the mean square error performance by 49% in vehicular settings. We propose to use the position, velocity, and channel coefficient as state variables of the EKF algorithm and show that such an approach results in improved beam tracking with low computational complexity by taking the kinematic characteristics of the system into account. We also explicitly derive the closed-from expressions for the Jacobian matrix of the EKF algorithm.

eess.SP↗

arXiv2019

Fast Channel Estimation and Beam Tracking for Millimeter Wave Vehicular Communications

Millimeter wave (mmWave) has been claimed to be the only viable solution for high-bandwidth vehicular communications. However, frequent channel estimation and beamforming required to provide a satisfactory quality of service limits mmWave for vehicular communications. In this paper, we propose a novel channel estimation and beam tracking framework for mmWave communications in a vehicular network setting. For channel estimation, we propose an algorithm termed robust adaptive multi-feedback (RAF) that achieves comparable estimation performance as existing channel estimation algorithms, with a significantly smaller number of feedback bits. We derive upper and lower bounds on the probability of estimation error (PEE) of the RAF algorithm, given a number of channel estimations, whose accuracy is verified through Monte Carlo simulations. For beam tracking, we propose a new practical model for mmWave vehicular communications. In contrast to the prior works, the model is based on position, velocity, and channel coefficient, which allows a significant improvement of the tracking performance. Focused on the new beam tracking model, we re-derive the equations for Jacobian matrices, reducing the complexity for vehicular communications. An extensive number of simulations is conducted to show the superiority of our proposed channel estimation method and beam tracking algorithm in comparison with the existing algorithms and models. Our simulations suggest that the RAF algorithm can achieve the desired PEE, while on average, reducing the feedback overhead by 75.5% and the total channel estimation time by 14%. The beam tracking algorithm is also shown to significantly improve beam tracking performance, allowing more room for data transmission.

eess.SP↗

arXiv2018

Ray-of-Arrival Passing for Indirect Beam Training in Cooperative Millimeter Wave MIMO Networks

This paper is concerned with the channel estimation problem in multi-cell Millimeter (mmWave) wireless systems. We develop a novel Ray-of-Arrival Passing for Indirect (RAPID) Beam Training framework, in which a network consisting of multiple BS are able to work cooperatively to estimate jointly the UE channels. To achieve this aim, we consider the spatial geometry of the mmWave environment and transform conventional angular domain beamforming concepts into the more euclidean, Ray-based domain. Leveraging this model, we then consider the conditional probabilities that pilot signals are received in each direction, given that the deployment of each BS is known to the network. Simulation results show that RAPID is able to improve the average estimation of the network and significantly increase the rate of poorer quality links. Furthermore, we also show that, when a coverage rate threshold is considered, RAPID is able to improve greatly the probability that multiple link options will be available to a user at any given time.

cs.IT↗

arXiv2018

Beam-On-Graph: Simultaneous Channel Estimation for mmWave MIMO Systems with Multiple Users

This paper is concerned with the channel estimation problem in multi-user millimeter wave (mmWave) wireless systems with large antenna arrays. We develop a novel simultaneous-estimation with iterative fountain training (SWIFT) framework, in which multiple users estimate their channels at the same time and the required number of channel measurements is adapted to various channel conditions of different users. To achieve this, we represent the beam direction estimation process by a graph, referred to as the beam-on-graph, and associate the channel estimation process with a code-on-graph decoding problem. Specifically, the base station (BS) and each user measure the channel with a series of random combinations of transmit/receive beamforming vectors until the channel estimate converges. As the proposed SWIFT does not adapt the BS's beams to any single user, we are able to estimate all user channels simultaneously. Simulation results show that SWIFT can significantly outperform the existing random beamforming-based approaches, which use a predetermined number of measurements, over a wide range of signal-to-noise ratios and channel coherence time. Furthermore, by utilizing the users' order in terms of completing their channel estimation, our SWIFT framework can infer the sequence of users' channel quality and perform effective user scheduling to achieve superior performance.

cs.IT↗

arXiv2018

Fast Channel Estimation for Millimetre Wave Wireless Systems Using Overlapped Beam Patterns

This paper is concerned with the channel estimation problem in millimetre wave (MMW) wireless systems with large antenna arrays. By exploiting the sparse nature of the MMW channel, we present an efficient estimation algorithm based on a novel overlapped beam pattern design. The performance of the algorithm is analyzed and an upper bound on the probability of channel estimation failure is derived. Results show that the algorithm can significantly reduce the number of required measurements in channel estimation (e.g., by 225% when a single overlap is used) when compared to the existing channel estimation algorithm based on non-overlapped beam patterns.

cs.IT↗

arXiv2018

RAF: Robust Adaptive Multi-Feedback Channel Estimation for Millimeter Wave MIMO Systems

Millimeter wave is a promising technology for the next generation of wireless systems. As it is well-known for its high path loss, the systems working in this spectrum tend to exploit the shorter wavelength to equip the transceivers with a large number of antennas to overcome the path loss issue. The large number of antennas leads to large channel matrices and consequently a challenging channel estimation problem. The channel estimation algorithms that have been proposed so far either neglect the probability of estimation error or require a high feedback overload from receivers to ensure the target probability of estimation error. In this paper, we propose a multi-stage adaptive channel estimation algorithm called robust adaptive multi-feedback (RAF). The algorithm is based on using the estimated channel coefficient to predict a lower bound for the required number of measurements. Our simulations demonstrate that compared with existing algorithms, RAF can achieve the desired probability of estimation error while on average reducing the feedback overhead by 75.5% and the total channel estimation time by 14%.

cs.IT↗

arXiv2017

Fountain Code-Inspired Channel Estimation for Multi-user Millimeter Wave MIMO Systems

This paper develops a novel channel estimation approach for multi-user millimeter wave (mmWave) wireless systems with large antenna arrays. By exploiting the inherent mmWave channel sparsity, we propose a novel simultaneous-estimation with iterative fountain training (SWIFT) framework, in which the average number of channel measurements is adapted to various channel conditions. To this end, the base station (BS) and each user continue to measure the channel with a random subset of transmit/receive beamforming directions until the channel estimate converges. We formulate the channel estimation process as a compressed sensing problem and apply a sparse estimation approach to recover the virtual channel information. As SWIFT does not adapt the BS's transmitting beams to any single user, we are able to estimate all user channels simultaneously. Simulation results show that SWIFT can significantly outperform existing random-beamforming based approaches that use a fixed number of measurements, over a range of signal-to-noise ratios and channel coherence times.

cs.IT↗

arXiv2016

Millimeter Wave MIMO Channel Estimation using Overlapped Beam Patterns and Rate Adaptation

This paper is concerned with the channel estimation problem in Millimeter wave (mmWave) wireless systems with large antenna arrays. By exploiting the inherent sparse nature of the mmWave channel, we first propose a fast channel estimation (FCE) algorithm based on a novel overlapped beam pattern design, which can increase the amount of information carried by each channel measurement and thus reduce the required channel estimation time compared to the existing non-overlapped designs. We develop a maximum likelihood (ML) estimator to optimally extract the path information from the channel measurements. Then, we propose a novel rate-adaptive channel estimation (RACE) algorithm, which can dynamically adjust the number of channel measurements based on the expected probability of estimation error (PEE). The performance of both proposed algorithms is analyzed. For the FCE algorithm, an approximate closed-form expression for the PEE is derived. For the RACE algorithm, a lower bound for the minimum signal energy-to-noise ratio required for a given number of channel measurements is developed based on the Shannon-Hartley theorem. Simulation results show that the FCE algorithm significantly reduces the number of channel estimation measurements compared to the existing algorithms using non-overlapped beam patterns. By adopting the RACE algorithm, we can achieve up to a 6dB gain in signal energy-to-noise ratio for the same PEE compared to the existing algorithms.

cs.IT↗

arXiv2016

RACE: A Rate Adaptive Channel Estimation Approach for Millimeter Wave MIMO Systems

In this paper, we consider the channel estimation problem in Millimeter wave (mmWave) wireless systems with large antenna arrays. By exploiting the inherent sparse nature of the mmWave channel, we develop a novel rate-adaptive channel estimation (RACE) algorithm, which can adaptively adjust the number of required channel measurements based on an expected probability of estimation error (PEE). To this end, we design a maximum likelihood (ML) estimator to optimally extract the path information and the associated probability of error from the increasing number of channel measurements. Based on the ML estimator, the algorithm is able to measure the channel using a variable number of beam patterns until the receiver believes that the estimated direction is correct. This is in contrast to the existing mmWave channel estimation algorithms, in which the number of measurements is typically fixed. Simulation results show that the proposed algorithm can significantly reduce the number of channel estimation measurements while still retaining a high level of accuracy, compared to existing multi-stage channel estimation algorithms.

cs.IT↗