arXiv subjects

Matthew Mattina

Publications and source records attributed to Matthew Mattina.

36 records · Page 2Linked to original sources

arXiv2020

TinyLSTMs: Efficient Neural Speech Enhancement for Hearing Aids

Modern speech enhancement algorithms achieve remarkable noise suppression by means of large recurrent neural networks (RNNs). However, large RNNs limit practical deployment in hearing aid hardware (HW) form-factors, which are battery powered and run on resource-constrained microcontroller units (MCUs) with limited memory capacity and compute capability. In this work, we use model compression techniques to bridge this gap. We define the constraints imposed on the RNN by the HW and describe a method to satisfy them. Although model compression techniques are an active area of research, we are the first to demonstrate their efficacy for RNN speech enhancement, using pruning and integer quantization of weights/activations. We also demonstrate state update skipping, which reduces the computational load. Finally, we conduct a perceptual evaluation of the compressed models to verify audio quality on human raters. Results show a reduction in model size and operations of 11.9$\times$ and 2.9$\times$, respectively, over the baseline for compressed models, without a statistical difference in listening preference and only exhibiting a loss of 0.55dB SDR. Our model achieves a computational latency of 2.39ms, well within the 10ms target and 351$\times$ better than previous work.

eess.AS↗

arXiv2020

Systolic Tensor Array: An Efficient Structured-Sparse GEMM Accelerator for Mobile CNN Inference

Convolutional neural network (CNN) inference on mobile devices demands efficient hardware acceleration of low-precision (INT8) general matrix multiplication (GEMM). The systolic array (SA) is a pipelined 2D array of processing elements (PEs), with very efficient local data movement, well suited to accelerating GEMM, and widely deployed in industry. In this work, we describe two significant improvements to the traditional SA architecture, to specifically optimize for CNN inference. Firstly, we generalize the traditional scalar PE, into a Tensor-PE, which gives rise to a family of new Systolic Tensor Array (STA) microarchitectures. The STA family increases intra-PE operand reuse and datapath efficiency, resulting in circuit area and power dissipation reduction of as much as 2.08x and 1.36x respectively, compared to the conventional SA at iso-throughput with INT8 operands. Secondly, we extend this design to support a novel block-sparse data format called density-bound block (DBB). This variant (STA-DBB) achieves a 3.14x and 1.97x improvement over the SA baseline at iso-throughput in area and power respectively, when processing specially-trained DBB-sparse models, while remaining fully backwards compatible with dense models.

cs.DC↗

arXiv2020

Searching for Winograd-aware Quantized Networks

Lightweight architectural designs of Convolutional Neural Networks (CNNs) together with quantization have paved the way for the deployment of demanding computer vision applications on mobile devices. Parallel to this, alternative formulations to the convolution operation such as FFT, Strassen and Winograd, have been adapted for use in CNNs offering further speedups. Winograd convolutions are the fastest known algorithm for spatially small convolutions, but exploiting their full potential comes with the burden of numerical error, rendering them unusable in quantized contexts. In this work we propose a Winograd-aware formulation of convolution layers which exposes the numerical inaccuracies introduced by the Winograd transformations to the learning of the model parameters, enabling the design of competitive quantized models without impacting model size. We also address the source of the numerical error and propose a relaxation on the form of the transformation matrices, resulting in up to 10% higher classification accuracy on CIFAR-10. Finally, we propose wiNAS, a neural architecture search (NAS) framework that jointly optimizes a given macro-architecture for accuracy and latency leveraging Winograd-aware layers. A Winograd-aware ResNet-18 optimized with wiNAS for CIFAR-10 results in 2.66x speedup compared to im2row, one of the most widely used optimized convolution implementations, with no loss in accuracy.

cs.LG↗

arXiv2020

Compressing RNNs for IoT devices by 15-38x using Kronecker Products

Recurrent Neural Networks (RNN) can be difficult to deploy on resource constrained devices due to their size.As a result, there is a need for compression techniques that can significantly compress RNNs without negatively impacting task accuracy. This paper introduces a method to compress RNNs for resource constrained environments using Kronecker product (KP). KPs can compress RNN layers by 15-38x with minimal accuracy loss. By quantizing the resulting models to 8-bits, we further push the compression factor to 50x. We show that KP can beat the task accuracy achieved by other state-of-the-art compression techniques across 5 benchmarks spanning 3 different applications, while simultaneously improving inference run-time. We show that the KP compression mechanism does introduce an accuracy loss, which can be mitigated by a proposed hybrid KP (HKP) approach. Our HKP algorithm provides fine-grained control over the compression ratio, enabling us to regain accuracy lost during compression by adding a small number of model parameters.

cs.LG↗

arXiv2020

Noisy Machines: Understanding Noisy Neural Networks and Enhancing Robustness to Analog Hardware Errors Using Distillation

The success of deep learning has brought forth a wave of interest in computer hardware design to better meet the high demands of neural network inference. In particular, analog computing hardware has been heavily motivated specifically for accelerating neural networks, based on either electronic, optical or photonic devices, which may well achieve lower power consumption than conventional digital electronics. However, these proposed analog accelerators suffer from the intrinsic noise generated by their physical components, which makes it challenging to achieve high accuracy on deep neural networks. Hence, for successful deployment on analog accelerators, it is essential to be able to train deep neural networks to be robust to random continuous noise in the network weights, which is a somewhat new challenge in machine learning. In this paper, we advance the understanding of noisy neural networks. We outline how a noisy neural network has reduced learning capacity as a result of loss of mutual information between its input and output. To combat this, we propose using knowledge distillation combined with noise injection during training to achieve more noise robust networks, which is demonstrated experimentally across different networks and datasets, including ImageNet. Our method achieves models with as much as two times greater noise tolerance compared with the previous best attempts, which is a significant step towards making analog hardware practical for deep learning.

cs.LG↗

arXiv2019

Ternary MobileNets via Per-Layer Hybrid Filter Banks

MobileNets family of computer vision neural networks have fueled tremendous progress in the design and organization of resource-efficient architectures in recent years. New applications with stringent real-time requirements on highly constrained devices require further compression of MobileNets-like already compute-efficient networks. Model quantization is a widely used technique to compress and accelerate neural network inference and prior works have quantized MobileNets to 4-6 bits albeit with a modest to significant drop in accuracy. While quantization to sub-byte values (i.e. precision less than or equal to 8 bits) has been valuable, even further quantization of MobileNets to binary or ternary values is necessary to realize significant energy savings and possibly runtime speedups on specialized hardware, such as ASICs and FPGAs. Under the key observation that convolutional filters at each layer of a deep neural network may respond differently to ternary quantization, we propose a novel quantization method that generates per-layer hybrid filter banks consisting of full-precision and ternary weight filters for MobileNets. The layer-wise hybrid filter banks essentially combine the strengths of full-precision and ternary weight filters to derive a compact, energy-efficient architecture for MobileNets. Using this proposed quantization method, we quantized a substantial portion of weight filters of MobileNets to ternary values resulting in 27.98% savings in energy, and a 51.07% reduction in the model size, while achieving comparable accuracy and no degradation in throughput on specialized hardware in comparison to the baseline full-precision MobileNets.

cs.LG↗

arXiv2019

Pushing the limits of RNN Compression

cs.LG↗

arXiv2019

SpArSe: Sparse Architecture Search for CNNs on Resource-Constrained Microcontrollers

The vast majority of processors in the world are actually microcontroller units (MCUs), which find widespread use performing simple control tasks in applications ranging from automobiles to medical devices and office equipment. The Internet of Things (IoT) promises to inject machine learning into many of these every-day objects via tiny, cheap MCUs. However, these resource-impoverished hardware platforms severely limit the complexity of machine learning models that can be deployed. For example, although convolutional neural networks (CNNs) achieve state-of-the-art results on many visual recognition tasks, CNN inference on MCUs is challenging due to severe finite memory limitations. To circumvent the memory challenge associated with CNNs, various alternatives have been proposed that do fit within the memory budget of an MCU, albeit at the cost of prediction accuracy. This paper challenges the idea that CNNs are not suitable for deployment on MCUs. We demonstrate that it is possible to automatically design CNNs which generalize well, while also being small enough to fit onto memory-limited MCUs. Our Sparse Architecture Search method combines neural architecture search with pruning in a single, unified approach, which learns superior models on four popular IoT datasets. The CNNs we find are more accurate and up to $4.35\times$ smaller than previous approaches, while meeting the strict MCU working memory constraint.

cs.LG↗

arXiv2019

Learning low-precision neural networks without Straight-Through Estimator(STE)

The Straight-Through Estimator (STE) is widely used for back-propagating gradients through the quantization function, but the STE technique lacks a complete theoretical understanding. We propose an alternative methodology called alpha-blending (AB), which quantizes neural networks to low-precision using stochastic gradient descent (SGD). Our method (AB) avoids STE approximation by replacing the quantized weight in the loss function by an affine combination of the quantized weight w_q and the corresponding full-precision weight w with non-trainable scalar coefficient $α$ and $1-α$. During training, $α$ is gradually increased from 0 to 1; the gradient updates to the weights are through the full-precision term, $(1-α)w$, of the affine combination; the model is converted from full-precision to low-precision progressively. To evaluate the method, a 1-bit BinaryNet on CIFAR10 dataset and 8-bits, 4-bits MobileNet v1, ResNet_50 v1/2 on ImageNet dataset are trained using the alpha-blending approach, and the evaluation indicates that AB improves top-1 accuracy by 0.9%, 0.82% and 2.93% respectively compared to the results of STE based quantization.

cs.LG↗

arXiv2019

Measuring scheduling efficiency of RNNs for NLP applications

Recurrent neural networks (RNNs) have shown state of the art results for speech recognition, natural language processing, image captioning and video summarizing applications. Many of these applications run on low-power platforms, so their energy efficiency is extremely important. We observed that cache-oblivious RNN scheduling during inference typically results in 30-50x more data transferred on and off the CPU than the application's working set size. This can potentially impact its energy efficiency. This paper presents a new metric called Data Reuse Efficiency to gauge the RNN scheduling efficiency of a platform and shows the factors that influence the DRE value. Additionally, this paper discusses an optimization to improve reuse in RNNs and highlights the positive impact of this optimization on the total amount of memory read from or written to the memory controller (and, hence, the DRE value) during the execution of an RNN application for a mobile SoC.

cs.DC↗

arXiv2019

Efficient Winograd or Cook-Toom Convolution Kernel Implementation on Widely Used Mobile CPUs

The Winograd or Cook-Toom class of algorithms help to reduce the overall compute complexity of many modern deep convolutional neural networks (CNNs). Although there has been a lot of research done on model and algorithmic optimization of CNN, little attention has been paid to the efficient implementation of these algorithms on embedded CPUs, which usually have very limited memory and low power budget. This paper aims to fill this gap and focuses on the efficient implementation of Winograd or Cook-Toom based convolution on modern Arm Cortex-A CPUs, widely used in mobile devices today. Specifically, we demonstrate a reduction in inference latency by using a set of optimization strategies that improve the utilization of computational resources, and by effectively leveraging the ARMv8-A NEON SIMD instruction set. We evaluated our proposed region-wise multi-channel implementations on Arm Cortex-A73 platform using several representative CNNs. The results show significant performance improvements in full network, up to 60%, over existing im2row/im2col based optimization techniques

cs.LG↗

arXiv2019

Ternary Hybrid Neural-Tree Networks for Highly Constrained IoT Applications

Machine learning-based applications are increasingly prevalent in IoT devices. The power and storage constraints of these devices make it particularly challenging to run modern neural networks, limiting the number of new applications that can be deployed on an IoT system. A number of compression techniques have been proposed, each with its own trade-offs. We propose a hybrid network which combines the strengths of current neural- and tree-based learning techniques in conjunction with ternary quantization, and show a detailed analysis of the associated model design space. Using this hybrid model we obtained a 11.1% reduction in the number of computations, a 52.2% reduction in the model size, and a 30.6% reduction in the overall memory footprint over a state-of-the-art keyword-spotting neural network, with negligible loss in accuracy.

cs.LG↗

arXiv2019

FixyNN: Efficient Hardware for Mobile Computer Vision via Transfer Learning

The computational demands of computer vision tasks based on state-of-the-art Convolutional Neural Network (CNN) image classification far exceed the energy budgets of mobile devices. This paper proposes FixyNN, which consists of a fixed-weight feature extractor that generates ubiquitous CNN features, and a conventional programmable CNN accelerator which processes a dataset-specific CNN. Image classification models for FixyNN are trained end-to-end via transfer learning, with the common feature extractor representing the transfered part, and the programmable part being learnt on the target dataset. Experimental results demonstrate FixyNN hardware can achieve very high energy efficiencies up to 26.6 TOPS/W ($4.81 \times$ better than iso-area programmable accelerator). Over a suite of six datasets we trained models via transfer learning with an accuracy loss of $<1\%$ resulting in up to 11.2 TOPS/W - nearly $2 \times$ more efficient than a conventional programmable CNN accelerator of the same area.

cs.CV↗

arXiv2019

Energy Efficient Hardware for On-Device CNN Inference via Transfer Learning

On-device CNN inference for real-time computer vision applications can result in computational demands that far exceed the energy budgets of mobile devices. This paper proposes FixyNN, a co-designed hardware accelerator platform which splits a CNN model into two parts: a set of layers that are fixed in the hardware platform as a front-end fixed-weight feature extractor, and the remaining layers which become a back-end classifier running on a conventional programmable CNN accelerator. The common front-end provides ubiquitous CNN features for all FixyNN models, while the back-end is programmable and specific to a given dataset. Image classification models for FixyNN are trained end-to-end via transfer learning, with front-end layers fixed for the shared feature extractor, and back-end layers fine-tuned for a specific task. Over a suite of six datasets, we trained models via transfer learning with an accuracy loss of <1%, resulting in a FixyNN hardware platform with nearly 2 times better energy efficiency than a conventional programmable CNN accelerator of the same silicon area (i.e. hardware cost).

cs.LG↗

arXiv2019

SCALE-Sim: Systolic CNN Accelerator Simulator

Systolic Arrays are one of the most popular compute substrates within Deep Learning accelerators today, as they provide extremely high efficiency for running dense matrix multiplications. However, the research community lacks tools to insights on both the design trade-offs and efficient mapping strategies for systolic-array based accelerators. We introduce Systolic CNN Accelerator Simulator (SCALE-Sim), which is a configurable systolic array based cycle accurate DNN accelerator simulator. SCALE-Sim exposes various micro-architectural features as well as system integration parameters to the designer to enable comprehensive design space exploration. This is the first systolic-array simulator tuned for running DNNs to the best of our knowledge. Using SCALE-Sim, we conduct a suite of case studies and demonstrate the effect of bandwidth, data flow and aspect ratio on the overall runtime and energy of Deep Learning kernels across vision, speech, text, and games. We believe that these insights will be highly beneficial to architects and ML practitioners.

cs.DC↗

arXiv2018

Efficient and Robust Machine Learning for Real-World Systems

While machine learning is traditionally a resource intensive task, embedded systems, autonomous navigation and the vision of the Internet-of-Things fuel the interest in resource efficient approaches. These approaches require a carefully chosen trade-off between performance and resource consumption in terms of computation and energy. On top of this, it is crucial to treat uncertainty in a consistent manner in all but the simplest applications of machine learning systems. In particular, a desideratum for any real-world system is to be robust in the presence of outliers and corrupted data, as well as being `aware' of its limits, i.e.\ the system should maintain and provide an uncertainty estimate over its own predictions. These complex demands are among the major challenges in current machine learning research and key to ensure a smooth transition of machine learning technology into every day's applications. In this article, we provide an overview of the current state of the art of machine learning techniques facilitating these real-world requirements. First we provide a comprehensive review of resource-efficiency in deep neural networks with focus on techniques for model size reduction, compression and reduced precision. These techniques can be applied during training or as post-processing and are widely used to reduce both computational complexity and memory footprint. As most (practical) neural networks are limited in their ways to treat uncertainty, we contrast them with probabilistic graphical models, which readily serve these desiderata by means of probabilistic inference. In that way, we provide an extensive overview of the current state-of-the-art of robust and efficient machine learning for real-world systems.

cs.LG↗

arXiv2018

Euphrates: Algorithm-SoC Co-Design for Low-Power Mobile Continuous Vision

Continuous computer vision (CV) tasks increasingly rely on convolutional neural networks (CNN). However, CNNs have massive compute demands that far exceed the performance and energy constraints of mobile devices. In this paper, we propose and develop an algorithm-architecture co-designed system, Euphrates, that simultaneously improves the energy-efficiency and performance of continuous vision tasks. Our key observation is that changes in pixel data between consecutive frames represents visual motion. We first propose an algorithm that leverages this motion information to relax the number of expensive CNN inferences required by continuous vision applications. We co-design a mobile System-on-a-Chip (SoC) architecture to maximize the efficiency of the new algorithm. The key to our architectural augmentation is to co-optimize different SoC IP blocks in the vision pipeline collectively. Specifically, we propose to expose the motion data that is naturally generated by the Image Signal Processor (ISP) early in the vision pipeline to the CNN engine. Measurement and synthesis results show that Euphrates achieves up to 66% SoC-level energy savings (4 times for the vision computations), with only 1% accuracy loss.

cs.CV↗

arXiv2018

Mobile Machine Learning Hardware at ARM: A Systems-on-Chip (SoC) Perspective

Machine learning is playing an increasingly significant role in emerging mobile application domains such as AR/VR, ADAS, etc. Accordingly, hardware architects have designed customized hardware for machine learning algorithms, especially neural networks, to improve compute efficiency. However, machine learning is typically just one processing stage in complex end-to-end applications, involving multiple components in a mobile Systems-on-a-chip (SoC). Focusing only on ML accelerators loses bigger optimization opportunity at the system (SoC) level. This paper argues that hardware architects should expand the optimization scope to the entire SoC. We demonstrate one particular case-study in the domain of continuous computer vision where camera sensor, image signal processor (ISP), memory, and NN accelerator are synergistically co-designed to achieve optimal system-level efficiency.

cs.LG↗