arXiv subjects

Matthew T. Miles

Publications and source records attributed to Matthew T. Miles.

26 records · Page 2Linked to original sources

arXiv2023

Search for an isotropic gravitational-wave background with the Parkes Pulsar Timing Array

Pulsar timing arrays aim to detect nanohertz-frequency gravitational waves (GWs). A background of GWs modulates pulsar arrival times and manifests as a stochastic process, common to all pulsars, with a signature spatial correlation. Here we describe a search for an isotropic stochastic gravitational-wave background (GWB) using observations of 30 millisecond pulsars from the third data release of the Parkes Pulsar Timing Array (PPTA), which spans 18 years. Using current Bayesian inference techniques we recover and characterize a common-spectrum noise process. Represented as a strain spectrum $h_c = A(f/1 {\rm yr}^{-1})^α$, we measure $A=3.1^{+1.3}_{-0.9} \times 10^{-15}$ and $α=-0.45 \pm 0.20$ respectively (median and 68% credible interval). For a spectral index of $α=-2/3$, corresponding to an isotropic background of GWs radiated by inspiraling supermassive black hole binaries, we recover an amplitude of $A=2.04^{+0.25}_{-0.22} \times 10^{-15}$. However, we demonstrate that the apparent signal strength is time-dependent, as the first half of our data set can be used to place an upper limit on $A$ that is in tension with the inferred common-spectrum amplitude using the complete data set. We search for spatial correlations in the observations by hierarchically analyzing individual pulsar pairs, which also allows for significance validation through randomizing pulsar positions on the sky. For a process with $α=-2/3$, we measure spatial correlations consistent with a GWB, with an estimated false-alarm probability of $p \lesssim 0.02$ (approx. $2σ$). The long timing baselines of the PPTA and the access to southern pulsars will continue to play an important role in the International Pulsar Timing Array.

astro-ph.HE↗

arXiv2023

The gravitational-wave background null hypothesis: Characterizing noise in millisecond pulsar arrival times with the Parkes Pulsar Timing Array

The noise in millisecond pulsar (MSP) timing data can include contributions from observing instruments, the interstellar medium, the solar wind, solar system ephemeris errors, and the pulsars themselves. The noise environment must be accurately characterized in order to form the null hypothesis from which signal models can be compared, including the signature induced by nanohertz-frequency gravitational waves (GWs). Here we describe the noise models developed for each of the MSPs in the Parkes Pulsar Timing Array (PPTA) third data release, which have been used as the basis of a search for the isotropic stochastic GW background. We model pulsar spin noise, dispersion measure variations, scattering variations, events in the pulsar magnetospheres, solar wind variability, and instrumental effects. We also search for new timing model parameters and detected Shapiro delays in PSR~J0614$-$3329 and PSR~J1902$-$5105. The noise and timing models are validated by testing the normalized and whitened timing residuals for Gaussianity and residual correlations with time. We demonstrate that the choice of noise models significantly affects the inferred properties of a common-spectrum process. Using our detailed models, the recovered common-spectrum noise in the PPTA is consistent with a power law with a spectral index of $γ=13/3$, the value predicted for a stochastic GW background from a population of supermassive black hole binaries driven solely by GW emission.

astro-ph.HE↗

arXiv2023

Improving pulsar-timing solutions through dynamic pulse fitting

Precision pulsar timing is integral to the detection of the nanohertz stochastic gravitational-wave background as well as understanding the physics of neutron stars. Conventional pulsar timing often uses fixed time and frequency-averaged templates to determine the pulse times of arrival, which can lead to reduced accuracy when the pulse profile evolves over time. We illustrate a dynamic timing method that fits each observing epoch using basis functions. By fitting each epoch separately, we allow for the evolution of the pulse shape epoch to epoch. We apply our method to PSR J1103$-$5403 and demonstrate that it undergoes mode changing, making it the fourth millisecond pulsar to exhibit such behaviour. Our method, which is able to identify and time a single mode, yields a timing solution with a root-mean-square error of 1.343 $μ\mathrm{s}$, a factor of 1.78 improvement over template fitting on both modes. In addition, the white-noise amplitude is reduced 4.3 times, suggesting that fitting the full data set causes the mode changing to be incorrectly classified as white noise. This reduction in white noise boosts the signal-to-noise ratio of a gravitational-wave background signal for this particular pulsar by 32%. We discuss the possible applications for this method of timing to study pulsar magnetospheres and further improve the sensitivity of searches for nanohertz gravitational waves.

astro-ph.IM↗

arXiv2022

The MeerKAT Pulsar Timing Array: First Data Release

We present the first 2.5 years of data from the MeerKAT Pulsar Timing Array (MPTA), part of MeerTime, a MeerKAT Large Survey Project. The MPTA aims to precisely measure pulse arrival times from an ensemble of 88 pulsars visible from the Southern Hemisphere, with the goal of contributing to the search, detection and study of nanohertz-frequency gravitational waves as part of the International Pulsar Timing Array. This project makes use of the MeerKAT telescope, and operates with a typical observing cadence of two weeks using the L-band receiver that records data from 856-1712 MHz. We provide a comprehensive description of the observing system, software, and pipelines used and developed for the MeerTime project. The data products made available as part of this data release are from the 78 pulsars that had at least $30$ observations between the start of the MeerTime programme in February 2019 and October 2021. These include both sub-banded and band-averaged arrival times, as well as the initial timing ephemerides, noise models, and the frequency-dependent standard templates (portraits) used to derive pulse arrival times. After accounting for detected noise processes in the data, the frequency-averaged residuals of $67$ of the pulsars achieved a root-mean-square residual precision of $< 1 μ\rm{s}$. We also present a novel recovery of the clock correction waveform solely from pulsar timing residuals, and an exploration into preliminary findings of interest to the international pulsar timing community. The arrival times, standards and full Stokes parameter calibrated pulsar timing archives are publicly available.

astro-ph.HE↗

arXiv2022

Searches for Shapiro delay in seven binary pulsars using the MeerKAT telescope

Precision timing of millisecond pulsars in binary systems enables observers to detect the relativistic Shapiro delay induced by space time curvature. When favourably aligned, this enables constraints to be placed on the component masses and system orientation. Here we present the results of timing campaigns on seven binary millisecond pulsars observed with the 64-antenna MeerKAT radio telescope that show evidence of Shapiro delay: PSRs~J0101$-$6422, J1101$-$6424, J1125$-$6014, J1514$-$4946, J1614$-$2230, J1732$-$5049, and J1909$-$3744. Evidence for Shapiro delay was found in all of the systems, and for three the orientations and data quality enabled strong constraints on their orbital inclinations and component masses. For PSRs~J1125$-$6014, J1614$-$2230 and J1909$-$3744, we determined pulsar masses to be $M_{\rm p} = 1.68\pm 0.17 \, {\rm M_{\odot}} $, $1.94\pm 0.03 \, {\rm M_{\odot}} $ and $1.45 \pm 0.03 \, {\rm M_{\odot}}$, and companion masses to be $M_{\rm c} = 0.33\pm 0.02 \, {\rm M_{\odot}} $, $0.495\pm 0.005 \, {\rm M_{\odot}} $ and $0.205 \pm 0.003 \, {\rm M_{\odot}}$, respectively. This provides the first independent confirmation of PSR~J1614$-$2230's mass, one of the highest known. The Shapiro delays measured for PSRs~J0101$-$6422, J1101$-$6424, J1514$-$4946, and J1732$-$5049 were only weak, and could not provide interesting component mass limits. Despite a large number of millisecond pulsars being routinely timed, relatively few have accurate masses via Shapiro delays. We use simulations to show that this is expected, and provide a formula for observers to assess how accurately a pulsar mass can be determined. We also discuss the observed correlation between pulsar companion masses and spin period, and the anti-correlation between recycled pulsar mass and their companion masses.

astro-ph.HE↗

arXiv2022

Wideband timing of the Parkes Pulsar Timing Array UWL data

In 2018 an ultra-wide-bandwidth low-frequency (UWL) receiver was installed on the 64-m Parkes Radio Telescope enabling observations with an instantaneous frequency coverage from 704 to 4032 MHz. Here, we present the analysis of a three-year data set of 35 millisecond pulsars observed with the UWL by the Parkes Pulsar Timing Array (PPTA), using wideband timing methods. The two key differences compared to typical narrow-band methods are, firstly, generation of two-dimensional templates accounting for pulse shape evolution with frequency and, secondly, simultaneous measurements of the pulse time-of-arrival (ToA) and dispersion measure (DM). This is the first time that wideband timing has been applied to a uniform data set collected with a single large-fractional bandwidth receiver, for which such techniques were originally developed. As a result of our study, we present a set of profile evolution models and new timing solutions including initial noise analysis. Precision of our ToA and DM measurements is in the range of 0.005 $-$ 2.08 $μ$s and (0.043$-$14.24)$\times10^{-4}$ cm$^{-3}$ pc, respectively, with 94% of the pulsars achieving a median ToA uncertainty of less than 1 $μ$s.

astro-ph.HE↗

arXiv2021

Mode changing in J1909$-$3744: the most precisely timed pulsar

We present baseband radio observations of the millisecond pulsar J1909$-$3744, the most precisely timed pulsar, using the MeerKAT telescope as part of the MeerTime pulsar timing array campaign. During a particularly bright scintillation event the pulsar showed strong evidence of pulse mode changing, among the first millisecond pulsars and the shortest duty cycle millisecond pulsar to do so. Two modes appear to be present, with the weak (lower signal-to-noise ratio) mode arriving $9.26$ $\pm 3.94$ $μ$s earlier than the strong counterpart. Further, we present a new value of the jitter noise for this pulsar of $8.20 \pm 0.14$ ns in one hour, finding it to be consistent with previous measurements taken with the MeerKAT ($9 \pm 3$ ns) and Parkes ($8.6 \pm 0.8$ ns) telescopes, but inconsistent with the previously most precise measurement taken with the Green Bank telescope ($14 \pm 0.5$ ns). Timing analysis on the individual modes is carried out for this pulsar, and we find an approximate $10\%$ improvement in the timing precision is achievable through timing the strong mode only as opposed to the full sample of pulses. By forming a model of the average pulse from templates of the two modes, we time them simultaneously and demonstrate that this timing improvement can also be achieved in regular timing observations. We discuss the impact an improvement of this degree on this pulsar would have on searches for the stochastic gravitational wave background, as well as the impact of a similar improvement on all MeerTime PTA pulsars.

astro-ph.HE↗

arXiv2018

On the discovery of K-enhanced and possibly Mg-depleted stars throughout the Milky Way

Stars with unusual elemental abundances offer clues about rare astrophysical events or nucleosynthetic pathways. Stars with significantly depleted magnesium and enhanced potassium ([Mg/Fe] < -0.5; [K/Fe] > 1) have to date only been found in the massive globular cluster NGC 2419 and, to a lesser extent, NGC 2808. The origin of this abundance signature remains unknown, as does the reason for its apparent exclusivity to these two globular clusters. Here we present 112 field stars, identified from 454,180 LAMOST giants, that show significantly enhanced [K/Fe] and possibly depleted [Mg/Fe] abundance ratios. Our sample spans a wide range of metallicities (-1.5 < [Fe/H] < 0.3), yet none show abundance ratios of [K/Fe] or [Mg/Fe] that are as extreme as those observed in NGC 2419. If confirmed, the identified sample of stars represents evidence that the nucleosynthetic process producing the anomalous abundances ratios of [K/Fe] and [Mg/Fe] probably occurs at a wide range of metallicities. This would suggest that pollution scenarios that are limited to early epochs (such as Population III supernovae) are an unlikely explanation, although they cannot be ruled out entirely. This sample is expected to help guide modelling attempts to explain the origin of the Mg-K abundance signature.

astro-ph.SR↗