arXiv subjects

Matthias Hölzl

Publications and source records attributed to Matthias Hölzl.

4 recordsLinked to original sources

arXiv2026

AXUV synthetic diagnostic for ASDEX Upgrade and its application for SPI simulations

We introduce an Absolute eXtended UltraViolet (AXUV) diode-based camera forward-modelling tool to support the validation of mitigated disruption simulations and the interpretation of experimental phenomena, with applications to the ASDEX Upgrade (AUG) tokamak. AXUV diodes measure electromagnetic radiation across a wide spectral range with a significantly higher time resolution (~microseconds) than foil bolometers (~milliseconds), albeit with a non-uniform spectral responsivity. AXUV is suitable for examining fast phenomena, such as shattered pellet injection (SPI), where the radiation localisation and radiated power provide information on the deposition of pellet material. Due to the characteristics and degradation of AXUV diodes, absolute power measurements are subject to large systematic uncertainties, especially when the spectra are time-varying, as in e.g. mixed Ne/D2 SPI experiments. These challenges motivated the development of a synthetic diagnostic within the Cherab-Raysect optical modelling framework, which is applied here to four AXUV cameras in two poloidal cross-sections of AUG. The synthetic diagnostic provides a means to understand how the diodes measure radiation under SPI conditions and to connect first-principles plasma simulations with experimental measurements. The details of the synthetic diagnostic are presented, and the capabilities are illustrated with applications to AUG SPI simulations performed in JOREK. The synthetic signals generated from these simulations are compared with experimental measurements from the 2022 SPI campaign and show qualitatively similar features in many respects. Particularly good agreement was found in the time evolution of the studied high Ne-content (10%) pellet, whereas a different, low Ne-content (0.17%) case exhibited more pronounced differences, likely due to the absence of background impurities in the underlying SPI simulations.

physics.plasm-ph↗

arXiv2026

A new model for runaway electron transport based on chaotic Hamiltonian systems

The transport of runaway electrons (RE) in ergodic magnetic geometries is an area of active study. Computing the transport from the direct simulation of particle trajectories is computationally expensive. Instead, diffusion models, such as the one by Rechester and Rosenbluth, are often employed to incorporate transport effects into reduced simulations. However, the comparison of diffusion-based to direct simulations reveals that the transport is typically not purely diffusive. In this paper, we introduce a simple transport model, based on chaos theory, which goes beyond the Rechester-Rosenbluth approximation. Besides chaotic diffusion, our model takes into account the effect of so-called sticky regions, a trapping layer around magnetic islands, where particle escape slows down to a power-law decay rather than an exponential decay. We demonstrate the applicability of the model both in the Ullmann-Caldas map with parameters corresponding to the TBR-1 tokamak, and in a JOREK simulation of a JET disruption scenario, with remarkably good fits achieved in both cases.

physics.plasm-ph↗

arXiv2025

Quantitative Magnetohydrodynamic Modelling of Flux Pumping in ASDEX Upgrade

The sawtooth-free hybrid scenario has been achieved recently in ASDEX Upgrade (AUG) with applied non-inductive current sources and auxiliary heating [A. Burckhart et al 2023 Nucl. Fusion 63 126056]. Control experiments in AUG suggest that the self-regulating magnetic flux pumping mechanism, characterized by anomalous current redistribution, is responsible for clamping the central safety factor (q_0) close to unity, thereby preventing the sawtooth onset. This work presents a numerical and theoretical investigation of flux pumping in the AUG hybrid scenario based on the two-temperature, visco-resistive, full magnetohydrodynamic (MHD) model with the JOREK code. To quantitatively model the flux pumping, we choose realistic parameters, plasma configurations, and source terms based on AUG experiments. During the initial saturation stage of the unstable 1/1 quasi-interchange mode (on millisecond timescales), q_0 exhibits fast under-damped oscillation and reaches a value closer to unity, which is attributed to the self-regulation of core plasma and the fast dynamo effect on the order of V/m. On the longer resistive diffusion timescale of seconds, the slow negative dynamo effect on the order of mV/m induced by the 1/1 MHD instability plays an effective role in flux pumping, which provides quantitative agreement with experimental observations for the first time. The final saturated 1/1 MHD instability exhibits features of the quasi-interchange mode and tearing mode, and the associated convective plasma flow velocity is a few m/s. The toroidal negative electric field from the slow dynamo dominantly offsets the positive current drive and continuously redistributes the current density and pressure. As a result, q_0 is maintained close to unity due to the low-shear profiles of current density and pressure in the plasma core, and the system enters a sawtooth-free and quasi-stationary helical state.

physics.plasm-ph↗

arXiv2025

Modelling of shattered pellet injection experiments on the ASDEX Upgrade tokamak

In a shattered pellet injection (SPI) system the penetration and assimilation of the injected material depends on the speed and size distribution of the SPI fragments. ASDEX Upgrade (AUG) was recently equipped with a flexible SPI to study the effect of these parameters on disruption mitigation efficiency. In this paper we study the impact of different parameters on SPI assimilation with the 1.5D INDEX code. Scans of fragment sizes, speeds and different pellet compositions are carried out for single SPI into AUG H-mode plasmas. We use a semi-empirical thermal quench (TQ) onset condition to study the material assimilation trends. For mixed deuterium-neon pellets, smaller/faster fragments start to assimilate quicker. However, at the expected onset of the global reconnection event (GRE),larger/faster fragments end up assimilating more material. Variations in the injected neon content lead to a large difference in the assimilated neon for neon content below $< 10^{21}$ atoms. For larger injected neon content, a self-regulating mechanism limits the variation in the amount of assimilated neon. We use a back-averaging model to simulate the plasmoid drift during pure deuterium injections with the back-averaging parameter determined by a interpretative simulation of an experimental pure deuterium injection discharge. Again, larger and faster fragments are found to lead to higher assimilation with the material assimilation limited to the plasma edge in general, due to the plasmoid drift. The trends of assimilation for varying fragment sizes, speeds and pellet composition qualitatively agree with the previously reported experimental observations.

physics.plasm-ph↗