arXiv subjects

Matthias Hoek

Publications and source records attributed to Matthias Hoek.

9 recordsLinked to original sources

arXiv2026

Precise measurement of the $\Lambda$-binding energy difference between $^3_\Lambda$H and $^4_\Lambda$H via decay-pion spectroscopy at MAMI

We performed high-precision decay-pion spectroscopy of light $\Lambda$ hypernuclei at the Mainz Microtron (MAMI) using the A1 spectrometer facility. By measuring the monochromatic $\pi^-$ momentum from the two-body weak decay $^3_\Lambda\mathrm{H} \to {}^3\mathrm{He} + \pi^-$ and referencing it to the $^4_\Lambda\mathrm{H} \to {}^4\mathrm{He} + \pi^-$ decay, we determined the $\Lambda$ binding energy of $^3_\Lambda\mathrm{H}$ with unprecedented accuracy. The obtained value, $B_\Lambda(^3_\Lambda\mathrm{H}) = 0.523 \pm 0.013~(\mathrm{stat.}) \pm 0.075~(\mathrm{syst.})$~MeV, is consistent with the STAR result, but indicates a significantly deeper binding than inferred from earlier measurements. This result implies a stronger $\Lambda$-deuteron interaction and provides stringent constraints on hyperon-nucleon interactions.

nucl-ex↗

arXiv2025

Measurement of the helicity-dependent response in quasi-elastic proton knockout from $^{40}{\rm Ca}$

The role of the electron-helicity-dependent cross-section term and the structure function $f^{\prime}_{01}$ in the quasi-elastic $A(\vec{e}, e^{\prime}p)$ process was studied. The $f^{\prime}_{01}$ was measured for proton knockout from the $1\mathrm{d}_{3/2}$ shell in $^{40}\mathrm{Ca}$ via the $^{40}{\rm Ca}(\vec{e},e' p)^{39}{\rm K}_{\rm g.s.}$ reaction, leaving the residual nucleus in a well-defined state. It requires a longitudinally polarized electron beam and out-of-plane proton detection. This structure function vanishes in the absence of final-state interactions (FSI) involving the ejected proton. Presented are the dependencies of $f^{\prime}_{01}$ on the missing momentum (closely related to the initial proton's Fermi momentum) and the angle between the knocked-out proton and the virtual photon momenta. The role of the spin-orbit interaction in FSI through the $\vec{L}\cdot \vec{S}$ term in a nuclear optical potential is discussed.

nucl-ex↗

arXiv2025

Measurement of $\rm ^{6}H$ ground state energy in an electron scattering experiment at MAMI-A1

For the first time the neutron-rich hydrogen isotope $\rm ^{6}H$ was produced in an electron scattering experiment in the reaction $\rm ^{7}Li(e,~e'p\pi^{+})^{6}H$ using the spectrometer facility of the A1 Collaboration at the Mainz Microtron accelerator. By measuring the triple coincidence between the scattered electron, the produced proton, and $\pi^{+}$, the missing mass spectrum of $\rm ^{6}H$ was obtained. A clear peak above $^3$H+n+n+n energy threshold was seen resulting in a ground state energy of $\rm ^{6}H$ at $2.3\pm0.5({\rm stat.})\pm0.4({\rm syst.})$ MeV with a width of $1.9\pm1.0({\rm stat.})\pm0.4({\rm syst.})$ MeV. This work challenges the understandings of multi-nucleon interactions and presents a new method to study light neutron-rich nuclei with electron scattering experiments.

nucl-ex↗

arXiv2021

Measurements of the electron-helicity asymmetry in the quasi-elastic ${\rm A}(\vec{e},e' p)$ process

We present measurements of the electron helicity asymmetry in quasi-elastic proton knockout from $^{2}$H and $^{12}$C nuclei by polarized electrons. This asymmetry depends on the fifth structure function, is antisymmetric with respect to the scattering plane, and vanishes in the absence of final-state interactions, and thus it provides a sensitive tool for their study. Our kinematics cover the full range in off-coplanarity angle $\phi_{pq}$, with a polar angle $\theta_{pq}$ coverage up to about 8 degrees. The missing energy resolution enabled us to determine the asymmetries for knock-out resulting in different states of the residual $^{11}$B system. We find that the helicity asymmetry for $p$-shell knockout from $^{12}$C depends on the final state of the residual system and is relatively large (up to $\approx 0.16$), especially at low missing momentum. It is considerably smaller (up to $\approx 0.01$) for $s$-shell knockout from both $^{12}$C and $^2$H. The data for $^2$H are in very good agreement with theoretical calculations, while the predictions for $^{12}$C exhibit differences with respect to the data.

nucl-ex↗

arXiv2020

Measurements of the induced polarization in the quasi-elastic $A(e,e'\vec p\,)$ process in non-coplanar kinematics

We report measurements of the induced polarization $\vec P$ of protons knocked out from $^2$H and $^{12}$C via the $A(e,e'\vec p\,)$ reaction. We have studied the dependence of $\vec P$ on two kinematic variables: the missing momentum $p_{\rm miss}$ and the "off-coplanarity" angle $ϕ_{pq}$ between the scattering and reaction planes. For the full 360$\degree$ range in $ϕ_{pq}$, both the normal ($P_y$) and, for the first time, the transverse ($P_x$) components of the induced polarization were measured with respect to the coordinate system associated with the scattering plane. $P_x$ vanishes in coplanar kinematics, however in non-coplanar kinematics, it is on the same scale as $P_y$. We find that the dependence on $ϕ_{pq}$ is sine-like for $P_x$ and cosine-like for $P_y$. For carbon, the magnitude of the induced polarization is especially large when protons are knocked out from the $p_{3/2}$ shell at very small $p_{\rm miss}$. For the deuteron, the induced polarization is near zero at small $|p_{\rm miss}|$, and its magnitude increases with $|p_{\rm miss}|$. For both nuclei such behavior is reproduced qualitatively by theoretical results, driven largely by the spin-orbit part of the final-state interactions. However, for both nuclei, sizeable discrepancies exist between experiment and theory.

nucl-ex↗

arXiv2019

The proton charge radius extracted from the Initial State Radiation experiment at MAMI

We report on a comprehensive reinterpretation of the existing cross-section data for elastic electron-proton scattering obtained by the initial-state radiation technique, resulting in a significantly improved accuracy of the extracted proton charge radius. By refining the external energy corrections we have achieved an outstanding description of the radiative tail, essential for a detailed investigation of the proton finite-size effects on the measured cross-sections. This development, together with a novel framework for determining the radius, based on a regression analysis of the cross-sections employing a polynomial model for the form factor, led us to a new value for the charge radius, which is $(0.870 \pm 0.014_\mathrm{stat.}\pm 0.024_\mathrm{sys.} \pm 0.003_\mathrm{mod.})\,\mathrm{fm}$.

nucl-ex↗

arXiv2014

Characterising encapsulated nuclear waste using cosmic-ray muon tomography

Tomographic imaging techniques using the Coulomb scattering of cosmic-ray muons have been shown previously to successfully identify and characterise low- and high-Z materials within an air matrix using a prototype scintillating-fibre tracker system. Those studies were performed as the first in a series to assess the feasibility of this technology and image reconstruction techniques in characterising the potential high-Z contents of legacy nuclear waste containers for the UK Nuclear Industry. The present work continues the feasibility study and presents the first images reconstructed from experimental data collected using this small-scale prototype system of low- and high-Z materials encapsulated within a concrete-filled stainless-steel container. Clear discrimination is observed between the thick steel casing, the concrete matrix and the sample materials assayed. These reconstructed objects are presented and discussed in detail alongside the implications for future industrial scenarios.

physics.ins-det↗

arXiv2013

The Design and Performance of a Scintillating-Fibre Tracker for the Cosmic-ray Muon Tomography of Legacy Nuclear Waste Containers

Tomographic imaging techniques using the Coulomb scattering of cosmic-ray muons are increasingly being exploited for the non-destructive assay of shielded containers in a wide range of applications. One such application is the characterisation of legacy nuclear waste materials stored within industrial containers. The design, assembly and performance of a prototype muon tomography system developed for this purpose are detailed in this work. This muon tracker comprises four detection modules, each containing orthogonal layers of Saint-Gobain BCF-10 2mm-pitch plastic scintillating fibres. Identification of the two struck fibres per module allows the reconstruction of the incoming and Coulomb-scattered muon trajectories. These allow the container content, with respect to the atomic number Z of the scattering material, to be determined through reconstruction of the scattering location and magnitude. On each detection layer, the light emitted by the fibre is detected by a single Hamamatsu H8500 MAPMT with two fibres coupled to each pixel via dedicated pairing schemes developed to ensure the identification of the struck fibre. The PMT signals are read out to QDCs. The design and assembly of the detector system are detailed and presented alongside results from performance studies with data collected after construction. These results reveal high stability during extended collection periods with detection efficiencies in the region of 80% per layer. Minor misalignments of millimetre order have been identified and corrected in software. A first image reconstructed from a test configuration of materials has been obtained using software based on the Maximum Likelihood Expectation Maximisation algorithm. The results highlight the high spatial resolution provided by the detector system. Clear discrimination between the low, medium and high-Z materials assayed is also observed.

physics.ins-det↗

arXiv2013

GEANT4 Simulation of a Scintillating-Fibre Tracker for the Cosmic-ray Muon Tomography of Legacy Nuclear Waste Containers

Cosmic-ray muons are highly penetrative charged particles that are observed at sea level with a flux of approximately one per square centimetre per minute. They interact with matter primarily through Coulomb scattering, which is exploited in the field of muon tomography to image shielded objects in a wide range of applications. In this paper, simulation studies are presented that assess the feasibility of a scintillating-fibre tracker system for use in the identification and characterisation of nuclear materials stored within industrial legacy waste containers. A system consisting of a pair of tracking modules above and a pair below the volume to be assayed is simulated within the GEANT4 framework using a range of potential fibre pitches and module separations. Each module comprises two orthogonal planes of fibres that allow the reconstruction of the initial and Coulomb-scattered muon trajectories. A likelihood-based image reconstruction algorithm has been developed that allows the container content to be determined with respect to the atomic number Z of the scattering material. Images reconstructed from this simulation are presented for a range of anticipated scenarios that highlight the expected image resolution and the potential of this system for the identification of high-Z materials within a shielded, concrete-filled container. First results from a constructed prototype system are presented in comparison with those from a detailed simulation. Excellent agreement between experimental data and simulation is observed showing clear discrimination between the different materials assayed throughout.

nucl-ex↗