arXiv subjects

Matthias Kränzler

Publications and source records attributed to Matthias Kränzler.

16 recordsLinked to original sources

arXiv2024

Energy Demand Prediction for Hardware Video Decoders Using Software Profiling

Energy efficiency for video communications is essential for mobile devices with a limited battery capacity. Therefore, hardware decoder implementations are commonly used to significantly reduce the energetic load of video playback. The energy consumption of such a hardware implementation largely depends on a previously published specification of a video coding standard that defines which coding tools and methods are included. However, during the standardization of a video coding standard, the energy demand of a hardware implementation is unknown. Hence, the hardware complexity of coding tools is judged subjectively by experts from the field of hardware programming without using standardized assessment procedures. To solve this problem, we propose a method that accurately models the energy demand of existing hardware decoders with an average error of 1.79% by exploiting information from software decoder profiling. Motivated by the low estimation error, we propose a hardware decoding energy metric that can predict and estimate the energy demand of an unknown hardware implementation using information from existing hardware decoder implementations and available software implementations of the future video decoder. By using multiple video coding standards for model training, we can predict the relative energy demand of an unknown hardware decoder with a minimum error of 4.54% without using the corresponding hardware decoder for training.

eess.IV↗

arXiv2024

Design Space Exploration at Frame-Level for Joint Decoding Energy and Quality Optimization in VVC

In the pursuit of a reduced energy demand of VVC decoders, it was found that the coding tool configuration has a substantial influence on the bit rate efficiency and the decoding energy demand. The Advanced Design Space Exploration algorithm as proposed in the literature, can derive coding tool configurations that provide optimal trade-offs between rate and energy efficiency. Yet, some trade-off points in the design space cannot be reached with the state-of-the-art methodology, which defines coding tools for an entire bitstream. This work proposes a novel, granular adjustment of the coding tool usage in VVC. Consequently, the optimization algorithm is adjusted to explore coding tool configurations that operate on frame-level. Moreover, new optimization criteria are introduced to focus the search on specific bit rates. As a result, coding tool configurations are obtained which yield so far inaccessible trade-offs between bit rate efficiency and decoding energy demand for VVC-coded sequences. The proposed methodology extends the design space and enhances the continuity of the Pareto front.

eess.IV↗

arXiv2024

A Comprehensive Review of Software and Hardware Energy Efficiency of Video Decoders

Energy and compression efficiency are two essential parts of modern video decoder implementations that have to be considered. This work comprehensively studies the following six video coding formats regarding compression and decoding energy efficiency: AVC, VP9, HEVC, AV1, VVC, and AVM. We first evaluate the energy demand of reference and optimized software decoder implementations. Furthermore, we consider the influence of the usage of SIMD instructions on those decoder implementations. We find that AV1 is a sweet spot for optimized software decoder implementations with an additional energy demand of 16.55% and bitrate savings of -43.95% compared to VP9. We furthermore evaluate the hardware decoding energy demand of four video coding formats. Thereby, we show that AV1 has energy demand increases by 117.50% compared to VP9. For HEVC, we found a sweet spot in terms of energy demand with an increase of 6.06% with respect to VP9. Relative to their optimized software counterparts, hardware video decoders reduce the energy consumption to less than 9% compared to software decoders.

eess.IV↗

arXiv2023

The Bjøntegaard Bible -- Why your Way of Comparing Video Codecs May Be Wrong

In this paper, we provide an in-depth assessment on the Bjøntegaard Delta. We construct a large data set of video compression performance comparisons using a diverse set of metrics including PSNR, VMAF, bitrate, and processing energies. These metrics are evaluated for visual data types such as classic perspective video, 360$^\circ$ video, point clouds, and screen content. As compression technology, we consider multiple hybrid video codecs as well as state-of-the-art neural network based compression methods. Using additional supporting points inbetween standard points defined by parameters such as the quantization parameter, we assess the interpolation error of the Bjøntegaard-Delta (BD) calculus and its impact on the final BD value. From the analysis, we find that the BD calculus is most accurate in the standard application of rate-distortion comparisons with mean errors below 0.5 percentage points. For other applications and special cases, e.g., VMAF quality, energy considerations, or inter-codec comparisons, the errors are higher (up to 5 percentage points), but can be halved by using a higher number of supporting points. We finally come up with recommendations on how to use the BD calculus such that the validity of the resulting BD-values is maximized. Main recommendations are as follows: First, relative curve differences should be plotted and analyzed. Second, the logarithmic domain should be used for saturating metrics such as SSIM and VMAF. Third, BD values below a certain threshold indicated by the subset error should not be used to draw recommendations. Fourth, using two supporting points is sufficient to obtain rough performance estimates.

eess.IV↗

arXiv2023

Extended Signaling Methods for Reduced Video Decoder Power Consumption Using Green Metadata

In this paper, we discuss one aspect of the latest MPEG standard edition on energy-efficient media consumption, also known as Green Metadata (ISO/IEC 232001-11), which is the interactive signaling for remote decoder-power reduction for peer-to-peer video conferencing. In this scenario, the receiver of a video, e.g., a battery-driven portable device, can send a dedicated request to the sender which asks for a video bitstream representation that is less complex to decode and process. Consequently, the receiver saves energy and extends operating times. We provide an overview on latest studies from the literature dealing with energy-saving aspects, which motivate the extension of the legacy Green Metadata standard. Furthermore, we explain the newly introduced syntax elements and verify their effectiveness by performing dedicated experiments. We show that the integration of these syntax elements can lead to dynamic energy savings of up to 90% for software video decoding and 80% for hardware video decoding, respectively.

eess.IV↗

arXiv2023

Video Decoding Energy Reduction Using Temporal-Domain Filtering

In this paper, we study decoding energy reduction opportunities using temporal-domain filtering and subsampling methods. In particular, we study spatiotemporal filtering using a contrast sensitivity function and temporal downscaling, i.e., frame rate reduction. We apply these concepts as a pre-filtering to the video before compression and evaluate the bitrate, the decoding energy, and the visual quality with a dedicated metric targeting temporally down-scaled sequences. We find that decoding energy savings yield 35% when halving the frame rate and that spatiotemporal filtering can lead to up to 5% of additional savings, depending on the content.

eess.IV↗

arXiv2022

Modeling of Energy Consumption and Streaming Video QoE using a Crowdsourcing Dataset

In the past decade, we have witnessed an enormous growth in the demand for online video services. Recent studies estimate that nowadays, more than 1% of the global greenhouse gas emissions can be attributed to the production and use of devices performing online video tasks. As such, research on the true power consumption of devices and their energy efficiency during video streaming is highly important for a sustainable use of this technology. At the same time, over-the-top providers strive to offer high-quality streaming experiences to satisfy user expectations. Here, energy consumption and QoE partly depend on the same system parameters. Hence, a joint view is needed for their evaluation. In this paper, we perform a first analysis of both end-user power efficiency and Quality of Experience of a video streaming service. We take a crowdsourced dataset comprising 447,000 streaming events from YouTube and estimate both the power consumption and perceived quality. The power consumption is modeled based on previous work which we extended towards predicting the power usage of different devices and codecs. The user-perceived QoE is estimated using a standardized model. Our results indicate that an intelligent choice of streaming parameters can optimize both the QoE and the power efficiency of the end user device. Further, the paper discusses limitations of the approach and identifies directions for future research.

eess.IV↗

arXiv2022

Sweet Streams are Made of This: The System Engineer's View on Energy Efficiency in Video Communications

In recent years, the global use of online video services has increased rapidly. Today, a manifold of applications, such as video streaming, video conferencing, live broadcasting, and social networks, make use of this technology. A recent study found that the development and the success of these services had as a consequence that, nowadays, more than 1% of the global greenhouse-gas emissions are related to online video, with growth rates close to 10% per year. This article reviews the latest findings concerning energy consumption of online video from the system engineer's perspective, where the system engineer is the designer and operator of a typical online video service. We discuss all relevant energy sinks, highlight dependencies with quality-of-service variables as well as video properties, review energy consumption models for different devices from the literature, and aggregate these existing models into a global model for the overall energy consumption of a generic online video service. Analyzing this model and its implications, we find that end-user devices and video encoding have the largest potential for energy savings. Finally, we provide an overview of recent advances in energy efficiency improvement for video streaming and propose future research directions for energy-efficient video streaming services.

eess.IV↗

arXiv2022

Decoding Energy Modeling For Versatile Video Coding

In previous research, it was shown that the software decoding energy demand of High Efficiency Video Coding (HEVC) can be reduced by 15$\%$ by using a decoding-energy-rate-distortion optimization algorithm. To achieve this, the energy demand of the decoder has to be modeled by a bit stream feature-based model with sufficiently high accuracy. Therefore, we propose two bit stream feature-based models for the upcoming Versatile Video Coding (VVC) standard. The newly introduced models are compared with models from literature, which are used for HEVC. An evaluation of the proposed models reveals that the mean estimation error is similar to the results of the literature and yields an estimation error of 1.85% with 10-fold cross-validation.

eess.IV↗

arXiv2022

A Comparative Analysis of the Time and Energy Demand of Versatile Video Coding and High Efficiency Video Coding Reference Decoders

This paper investigates the decoding energy and decoding time demand of VTM-7.0 in relation to HM-16.20. We present the first detailed comparison of two video codecs in terms of software decoder energy consumption. The evaluation shows that the energy demand of the VTM decoder is increased significantly compared to HM and that the increase depends on the coding configuration. For the coding configuration randomaccess, we find that the decoding energy is increased by over 80% at a decoding time increase of over 70%. Furthermore, results indicate that the energy demand increases by up to 207% when Single Instruction Multiple Data (SIMD) instructions are disabled, which corresponds to the HM implementation style. By measurements, it is revealed that the coding tools MIP, AMVR, TPM, LFNST, and MTS increase the energy efficiency of the decoder. Furthermore, we propose a new coding configuration based on our analysis, which reduces the energy demand of the VTM decoder by over 17% on average.

eess.IV↗

arXiv2022

Extending Video Decoding Energy Models for 360° and HDR Video Formats in HEVC

Research has shown that decoder energy models are helpful tools for improving the energy efficiency in video playback applications. For example, an accurate feature-based bit stream model can reduce the energy consumption of the decoding process. However, until now only sequences of the SDR video format were investigated. Therefore, this paper shows that the decoding energy of HEVC-coded bit streams can be estimated precisely for different video formats and coding bit depths. Therefore, we compare a state-of-the-art model from the literature with a proposed model. We show that bit streams of the 360°, HDR, and fisheye video format can be estimated with a mean estimation error lower than 3.88% if the setups have the same coding bit depth. Furthermore, it is shown that on average, the energy demand for the decoding of bit streams with a bit depth of 10-bit is 55% higher than with 8-bit.

eess.IV↗

arXiv2022

Advanced Design Space Exploration for Joint Energy and Quality Optimization for VVC

In recent studies, it could be shown that the energy demand of Versatile Video Coding (VVC) decoders can be twice as high as comparable High Efficiency Video Coding (HEVC) decoders. A significant part of this increase in complexity is attributed to the usage of new coding tools. By using a design space exploration algorithm, it was shown that the energy demand of VVC-coded sequences could be reduced if different coding tool profiles were used for the encoding process. This work extends the algorithm with several optimization strategies, methodological adjustments to optimize perceptual quality, and a new minimization criterion. As a result, we significantly improve the Pareto front, and the rate-distortion and energy efficiency of the state-of-the-art design space exploration. Therefore, we show an energy demand reduction of up to 47% with less than 30% additional bit rate, or a reduction of over 35% with approximately 6% additional bit rate.

eess.IV↗

arXiv2022

Optimized Decoding-Energy-Aware Encoding in Practical VVC Implementations

The optimization of the energy demand is crucial for modern video codecs. Previous studies show that the energy demand of VVC decoders can be improved by more than 50% if specific coding tools are disabled in the encoder. However, those approaches increase the bit rate by over 20% if the concept is applied to practical encoder implementations such as VVenC. Therefore, in this work, we investigate VVenC and study possibilities to reduce the additional bit rate, while still achieving low-energy decoding at reasonable encoding times. We show that encoding using our proposed coding tool profiles, the decoding energy efficiency is improved by over 25% with a bit rate increase of less than 5% with respect to standard encoding. Furthermore, we propose a second coding tool profile targeting maximum energy savings, which achieves 34% of energy savings at bitrate increases below 15%.

eess.IV↗

arXiv2022

Beyond Bjøntegaard: Limits of Video Compression Performance Comparisons

For 20 years, the gold standard to evaluate the performance of video codecs is to calculate average differences between ratedistortion curves, also called the "Bjøntegaard Delta". With the help of this tool, the compression performance of codecs can be compared. In the past years, we could observe that the calculus was also deployed for other metrics than bitrate and distortion in terms of peak signal-to-noise ratio, for example other quality metrics such as video multi-method assessment fusion or hardware-dependent metrics such as the decoding energy. However, it is unclear whether the Bjøntegaard Delta is a valid way to evaluate these metrics. To this end, this paper reviews several interpolation methods and evaluates their accuracy using different performancemetrics. As a result, we propose to use a novel approach based on Akima interpolation, which returns the most accurate results for a large variety of performance metrics. The approximation accuracy of this new method is determined to be below a bound of 1.5%.

eess.IV↗

arXiv2022

A Bitstream Feature Based Model for Video Decoding Energy Estimation

In this paper we show that a small amount of bit stream features can be used to accurately estimate the energy consumption of state-of-the-art software and hardware accelerated decoder implementations for four different video codecs. By testing the estimation performance on HEVC, H.264, H.263, and VP9 we show that the proposed model can be used for any hybrid video codec. We test our approach on a high amount of different test sequences to prove the general validity. We show that less than 20 features are sufficient to obtain mean estimation errors that are smaller than 8%. Finally, an example will show the performance trade-offs in terms of rate, distortion, and decoding energy for all tested codecs.

eess.IV↗

arXiv2021

Energy Efficient Video Decoding for VVC Using a Greedy Strategy Based Design Space Exploration

IP traffic has increased significantly in recent years, and it is expected that this progress will continue. Recent studies report that the viewing of online video content accounts for a share of 1% of the global greenhouse gas emissions. To reduce the data traffic of video streaming, the new standard Versatile Video Coding (VVC) has been finalized in 2020. In this paper, the energy efficiency of two different VVC decoders is analyzed in detail. Furthermore, we propose a design space exploration that uses an algorithm based on a greedy strategy to derive coding tool profiles that optimize the energy demand of the decoder. We show that the algorithm derives optimal coding tool profiles for a subset of coding tools. Additionally, we propose profiles that reduce the energy demand of VVC decoders and provide energy savings of more than 50% for sequences with 4K resolution. Thereby, we will also show that the proposed profiles can have a lower decoding energy demand than comparable HEVC-encoded bit streams while also having a significantly lower bit rate.

eess.IV↗