arXiv subjects

Matthias Mentink

Publications and source records attributed to Matthias Mentink.

5 recordsLinked to original sources

arXiv2024

Comparison of Two Detector Magnetic Systems for the Future Circular Hadron-Hadron Collider

The conceptual design study of a Future Circular hadron-hadron Collider (FCC-hh) to be con-structed at CERN with a center-of-mass energy of the order of 100 TeV requires superconducting magnetic systems with a central magnetic flux density of an order of 4 T for the experimental detectors. The developed concept of the FCC-hh detector involves the use of an iron-free magnetic system consisting of three superconducting solenoids. A superconducting magnet with a minimal steel yoke is proposed as an alternative to the baseline iron-free design. In this study, both magnetic system options for the FCC-hh detector are modeled with the same electrical parameters using Cobham$'$s program TOSCA. All the main characteristics of both designs are compared and discussed.

physics.ins-det↗

arXiv2022

Superconducting detector magnets for high energy physics

Various superconducting detector solenoids for particle physics have been developed in the world. The key technology is the aluminum-stabilized superconducting conductor for almost all the detector magnets in particle physics experiments. With the progress of the conductor, the coil fabrication technology has progressed as well, such as the inner coil winding technique, indirect cooling, transparent vacuum vessel, quench protection scheme using pure aluminum strips and so on. The detector solenoids design study is in progress for future big projects in Japan and Europe, that is, ILC, FCC and CLIC, based on the technologies established over many years. The combination of good mechanical properties and keeping a high RRR is a key point for the development of Al-stabilized conductor. The present concern for the detector solenoid development is to have been gradually losing the key technologies and experiences, because large-scale detector magnets with Al-stabilized conductor has not been fabricated after the success of CMS and ATLAS-CS in LHC. Complementary efforts are needed to resume an equivalent level of expertise, to extend the effort on research and to develop these technologies and apply them to future detector magnet projects. Especially, further effort is necessary for the industrial technology of Al-stabilized superconductor production. The worldwide collaboration with relevant institutes and industries will be critically important to re-realize and validate the required performances. Some detector solenoids for mid-scale experiment wound with conventional copper-stabilized Nb-Ti conductor require precise control of magnetic field distribution. The development efforts are on-going in terms of the magnetic field design technology with high precision simulation, coil fabrication technology and control method of magnetic field distribution.

physics.ins-det↗

arXiv2021

Numerical Analysis of the Screening Current-Induced Magnetic Field in the HTS Insert Dipole Magnet Feather-M2.1-2

Screening currents are field-induced dynamic phenomena which occur in superconducting materials, leading to persistent magnetization. Such currents are of importance in ReBCO tapes, where the large size of the superconducting filaments gives rise to strong magnetization phenomena. In consequence, superconducting accelerator magnets based on ReBCO tapes might experience a relevant degradation of the magnetic field quality in the magnet aperture, eventually leading to particle beam instabilities. Thus, persistent magnetization phenomena need to be accurately evaluated. In this paper, the 2D finite element model of the Feather-M2.1-2 magnet is presented. The model is used to analyze the influence of the screening current-induced magnetic field on the field quality in the magnet aperture. The model relies on a coupled field formulation for eddy current problems in time-domain. The formulation is introduced and verified against theoretical references. Then, the numerical model of the Feather-M2.1-2 magnet is detailed, highlighting the key assumptions and simplifications. The numerical results are discussed and validated with available magnetic measurements. A satisfactory agreement is found, showing the capability of the numerical tool in providing accurate analysis of the dynamic behavior of the Feather-M2.1-2 magnet.

physics.acc-ph↗

arXiv2020

A Coupled A-H Formulation for Magneto-Thermal Transients in High-Temperature Superconducting Magnets

The application of high-temperature superconductors to accelerator magnets for future particle colliders is under study. Numerical methods are crucial for an accurate evaluation of the complex dynamical behavior of the magnets, especially concerning the magnetic field quality and thermal behavior. We present a coupled $\textbf{A}$-$\textbf{H}$ field formulation for the analysis of magneto-thermal transients in accelerator magnets. The magnetic field strength $\textbf{H}$ accounts for the eddy current problem in the source regions containing the superconducting domains, while the magnetic vector potential $\textbf{A}$ represents the magnetoquasistatic problem in the normal and non-conducting domains. Furthermore, we include a slab approximation for the source regions, making the formulation suitable for large scale models composed of thousands of tapes. In this work, the relevant equations are derived and discussed, with emphasis on the coupling conditions. The weak formulation is derived, and numerical results are provided in order to both, verify the formulation and scale it to the size of an accelerator magnet.

physics.acc-ph↗

arXiv2018

STEAM: A Hierarchical Co-Simulation Framework for Superconducting Accelerator Magnet Circuits

Simulating the transient effects occurring in superconducting accelerator magnet circuits requires including the mutual electro-thermo-dynamic interaction among the circuit elements, such as power converters, magnets, and protection systems. Nevertheless, the numerical analysis is traditionally done separately for each element in the circuit, leading to possible non-consistent results. We present STEAM, a hierarchical co-simulation framework featuring the waveform relaxation method. The framework simulates a complex system as a composition of simpler, independent models that exchange information. The convergence of the coupling algorithm ensures the consistency of the solution. The modularity of the framework allows integrating models developed with both proprietary and in-house tools. The framework implements a user-customizable hierarchical algorithm to schedule how models participate to the co-simulation, for the purpose of using computational resources efficiently. As a case study, a quench scenario is co-simulated for the inner triplet circuit for the High Luminosity upgrade of the LHC at CERN.

physics.acc-ph↗