arXiv subjects

Matti Latva-Aho

Publications and source records attributed to Matti Latva-Aho.

At least 19 recordsLinked to original sources

arXiv2026

Beamforming and Waveform Optimization for RF Wireless Power Transfer with Beyond Diagonal Reconfigurable Intelligent Surfaces

Radio frequency (RF) wireless power transfer (WPT) is a promising technology to seamlessly charge low-power devices, but its low end-to-end power transfer efficiency remains a critical challenge. To address the latter, low-cost transmit/radiating architectures, e.g., based on reconfigurable intelligent surfaces (RISs), have shown great potential. Beyond diagonal (BD) RIS is a novel branch of RIS offering enhanced performance over traditional diagonal RIS (D-RIS) in wireless communications, but its potential gains in RF-WPT remain unexplored. Motivated by this, we analyze a BD-RIS-assisted single-antenna RF-WPT system to charge a single rectifier, and formulate a joint beamforming and multi-carrier waveform optimization problem aiming to maximize the harvested power. We propose two solutions relying on semi-definite programming for fully connected BD-RIS, a successive convex approximation (SCA)-based beamforming approach, and an efficient low-complexity iterative method relying on SCA. Numerical results show that the proposed algorithms converge and that adding transmit sub-carriers or RIS elements improves the harvesting performance. We show that the transmit power budget impacts the relative power allocation among different sub-carriers depending on the rectifier's operating regime, while BD-RIS shapes the cascade channel differently for frequency-selective and flat scenarios. Finally, we verify by simulation that BD-RIS and D-RIS achieve the same performance under pure far-field line-of-sight conditions (in the absence of mutual coupling). Meanwhile, BD-RIS outperforms D-RIS as the non-line-of-sight components of the channel become dominant.

eess.SP↗

arXiv2025

6G Resilience -- White Paper

6G must be designed to withstand, adapt to, and evolve amid prolonged, complex disruptions. Mobile networks' shift from efficiency-first to sustainability-aware has motivated this white paper to assert that resilience is a primary design goal, alongside sustainability and efficiency, encompassing technology, architecture, and economics. We promote resilience by analysing dependencies between mobile networks and other critical systems, such as energy, transport, and emergency services, and illustrate how cascading failures spread through infrastructures. We formalise resilience using the 3R framework: reliability, robustness, resilience. Subsequently, we translate this into measurable capabilities: graceful degradation, situational awareness, rapid reconfiguration, and learning-driven improvement and recovery. Architecturally, we promote edge-native and locality-aware designs, open interfaces, and programmability to enable islanded operations, fallback modes, and multi-layer diversity (radio, compute, energy, timing). Key enablers include AI-native control loops with verifiable behaviour, zero-trust security rooted in hardware and supply-chain integrity, and networking techniques that prioritise critical traffic, time-sensitive flows, and inter-domain coordination. Resilience also has a techno-economic aspect: open platforms and high-quality complementors generate ecosystem externalities that enhance resilience while opening new markets. We identify nine business-model groups and several patterns aligned with the 3R objectives, and we outline governance and standardisation. This white paper serves as an initial step and catalyst for 6G resilience. It aims to inspire researchers, professionals, government officials, and the public, providing them with the essential components to understand and shape the development of 6G resilience.

eess.SP↗

arXiv2025

Practical Challenges for Reliable RIS Deployment in Heterogeneous Multi-Operator Multi-Band Networks

Reconfigurable intelligent surfaces (RISs) have been introduced as arrays of nearly passive elements with software-tunable electromagnetic properties to dynamically manipulate the reflection/transmission of radio signals. Research works in this area are focused on two applications, namely {\it user-assist} RIS aiming at tuning the RIS to enhance the quality-of-service (QoS) of target users, and the {\it malicious} RIS aiming for an attacker to degrade the QoS at victim receivers through generating {\it intended} destructive interference. While both user-assist and malicious RIS applications have been explored extensively, the impact of RIS deployments on imposing {\it unintended} interference on various wireless user-equipments (EUs) remains underexplored. This paper investigates the challenges of integrating RISs into multi-carrier, multi-user, and multi-operator networks. We discuss how RIS deployments intended to benefit specific users can negatively impact other users served at various carrier frequencies through different network operators. While not an ideal solution, we discuss how ultra-narrowband metasurfaces can be incorporated into the manufacturing of RISs to mitigate some challenges of RIS deployment in wireless networks. We also present a simulation scenario to illuminate some practical challenges associated with the deployment of RISs in shared public environments.

eess.SY↗

arXiv2025

Assessment of the Sparsity-Diversity Trade-offs in Active Users Detection for mMTC with the Orthogonal Matching Pursuit

Wireless communication systems must increasingly support a multitude of machine-type communications (MTC) devices, thus calling for advanced strategies for active user detection (AUD). Recent literature has delved into AUD techniques based on compressed sensing, highlighting the critical role of signal sparsity. This study investigates the relationship between frequency diversity and signal sparsity in the AUD problem. Single-antenna users transmit multiple copies of non-orthogonal pilots across multiple frequency channels and the base station independently performs AUD in each channel using the orthogonal matching pursuit algorithm. We note that, although frequency diversity may improve the likelihood of successful reception of the signals, it may also damage the channel sparsity level, leading to important trade-offs. We show that a sparser signal significantly benefits AUD, surpassing the advantages brought by frequency diversity in scenarios with limited temporal resources and/or high numbers of receive antennas. Conversely, with longer pilots and fewer receive antennas, investing in frequency diversity becomes more impactful, resulting in a tenfold AUD performance improvement.

cs.IT↗

arXiv2024

Near-Field Spot Beamfocusing: A Correlation-Aware Transfer Learning Approach

Three-dimensional (3D) spot beamfocusing (SBF), in contrast to conventional angular-domain beamforming, concentrates radiating power within a very small volume in both radial and angular domains in the near-field zone. Recently the implementation of channel-state-information (CSI)-independent machine learning (ML)-based approaches have been developed for effective SBF using extremely large-scale programmable metasurface (ELPMs). These methods involve dividing the ELPMs into subarrays and independently training them with Deep Reinforcement Learning to jointly focus the beam at the desired focal point (DFP). This paper explores near-field SBF using ELPMs, addressing challenges associated with lengthy training times resulting from independent training of subarrays. To achieve a faster CSI-independent solution, inspired by the correlation between the beamfocusing matrices of the subarrays, we leverage transfer learning techniques. First, we introduce a novel similarity criterion based on the phase distribution image (PDI) of subarray apertures. Then we devise a subarray policy propagation scheme that transfers the knowledge from trained to untrained subarrays. We further enhance learning by introducing quasi-liquid layers as a revised version of the adaptive policy reuse technique. We show through simulations that the proposed scheme improves the training speed about 5 times. Furthermore, for dynamic DFP management, we devised a DFP policy blending process, which augments the convergence rate up to 8-fold.

eess.SP↗

arXiv2024

Waveform Optimization and Beam Focusing for Near-field Wireless Power Transfer with Dynamic Metasurface Antennas and Non-linear Energy Harvesters

Radio frequency (RF) wireless power transfer (WPT) is a promising technology for future wireless systems. However, the low power transfer efficiency (PTE) is a critical challenge for practical implementations. One of the main inefficiency sources is the power consumption and loss introduced by key components such as high-power amplifier (HPA) and rectenna, thus they must be carefully considered for PTE optimization. Herein, we consider a near-field RF-WPT system with a dynamic metasurface antenna (DMA) at the transmitter and non-linear energy harvesters. We provide a mathematical framework to calculate the power consumption and harvested power from multi-tone signal transmissions. Based on this, we propose an approach relying on alternating optimization and successive convex approximation for waveform optimization and beam focusing to minimize power consumption while meeting energy harvesting requirements. Numerical results show that increasing the number of transmit tones reduces the power consumption by leveraging the rectifier's non-linearity more efficiently. Moreover, they demonstrate that increasing the antenna length improves the performance, while DMA outperforms fully-digital architecture in terms of power consumption. Finally, our results verify that the transmitter focuses the energy on receivers located in the near-field, while energy beams are formed in the receivers' direction in the far-field region.

eess.SP↗

arXiv2024

6G Fresnel Spot Beamfocusing using Large-Scale Metasurfaces: A Distributed DRL-Based Approach

In this paper, we introduce the concept of spot beamfocusing (SBF) in the Fresnel zone through extremely large-scale programmable metasurfaces (ELPMs) as a key enabling technology for 6G networks. A smart SBF scheme aims to adaptively concentrate the aperture's radiating power exactly at a desired focal point (DFP) in the 3D space utilizing some Machine Learning (ML) method. This offers numerous advantages for next-generation networks including efficient wireless power transfer (WPT), interference mitigation, reduced RF pollution, and improved information security. SBF necessitates ELPMs with precise channel state information (CSI) for all ELPM elements. However, obtaining exact CSI for ELPMs is not feasible in all environments; we alleviate this by proposing an adaptive novel CSI-independent ML scheme based on the TD3 deep-reinforcement-learning (DRL) method. While the proposed ML-based scheme is well-suited for relatively small-size arrays, the computational complexity is unaffordable for ELPMs. To overcome this limitation, we introduce a modular highly scalable structure composed of multiple sub-arrays, each equipped with a TD3-DRL optimizer. This setup enables collaborative optimization of the radiated power at the DFP, significantly reducing computational complexity while enhancing learning speed. The proposed structures benefits in terms of 3D spot-like power distribution, convergence rate, and scalability are validated through simulation results.

eess.SY↗

arXiv2024

Towards Near-Field 3D Spot Beamfocusing: Possibilities, Challenges, and Use-cases

Spot beamfocusing (SBF) is the process of focusing the signal power in a small spot-like region in the 3D space, which can be either hard-tuned (HT) using traditional tools like lenses and mirrors or electronically reconfigured (ER) using modern large-scale intelligent surface phased arrays. ER-SBF can be a key enabling technology (KET) for the next-generation 6G wireless networks offering benefits to many future wireless application areas such as wireless communication and security, mid-range high-power and safe wireless chargers, medical and health, physics, etc. Although near-field HT-SBF and ER-beamfocusing have been studied in the literature and applied in the industry, there is no comprehensive study of different aspects of ER-SBF and its future applications, especially for nonoptical (mmWave, sub-THz, and THz) electromagnetic waves in the next generation wireless technology, which is the aim of this paper. The theoretical concepts behind ER-SBF, different antenna technologies for implementing ER-SBF, employing machine learning (ML)-based schemes for enabling channel-state-information (CSI)-independent ER-SBF, and different practical application areas that can benefit from ER-SBF will be explored.

cs.IT↗

arXiv2023

Energy Beamforming for RF Wireless Power Transfer with Dynamic Metasurface Antennas

Radio frequency (RF) wireless power transfer (WPT) is a promising technology for charging the Internet of Things. Practical RF-WPT systems usually require energy beamforming (EB), which can compensate for the severe propagation loss by directing beams toward the devices. The EB flexibility depends on the transmitter architecture, existing a trade-off between cost/complexity and degrees of freedom. Thus, simpler architectures such as dynamic metasurface antennas (DMAs) are gaining attention. Herein, we consider an RF-WPT system with a transmit DMA for meeting the energy harvesting requirements of multiple devices and formulate an optimization problem for the minimum-power design. First, we provide a mathematical model to capture the frequency-dependant signal propagation effect in the DMA architecture. Next, we propose a solution based on semi-definite programming and alternating optimization. Results show that a DMA-based structure can outperform a fully-digital implementation and that the required transmit power decreases with the antenna array size, while it increases and remains almost constant with frequency in DMA and FD, respectively.

eess.SP↗

arXiv2023

Decomposition Based Interference Management Framework for Local 6G Networks

Managing inter-cell interference is among the major challenges in a wireless network, more so when strict quality of service needs to be guaranteed such as in ultra-reliable low latency communications (URLLC) applications. This study introduces a novel intelligent interference management framework for a local 6G network that allocates resources based on interference prediction. The proposed algorithm involves an advanced signal pre-processing technique known as empirical mode decomposition followed by prediction of each decomposed component using the sequence-to-one transformer algorithm. The predicted interference power is then used to estimate future signal-to-interference plus noise ratio, and subsequently allocate resources to guarantee the high reliability required by URLLC applications. Finally, an interference cancellation scheme is explored based on the predicted interference signal with the transformer model. The proposed sequence-to-one transformer model exhibits its robustness for interference prediction. The proposed scheme is numerically evaluated against two baseline algorithms, and is found that the root mean squared error is reduced by up to 55% over a baseline scheme.

eess.SP↗

arXiv2023

Predictive Resource Allocation for URLLC using Empirical Mode Decomposition

Effective resource allocation is a crucial requirement to achieve the stringent performance targets of ultra-reliable low-latency communication (URLLC) services. Predicting future interference and utilizing it to design efficient interference management algorithms is one way to allocate resources for URLLC services effectively. This paper proposes an empirical mode decomposition (EMD) based hybrid prediction method to predict the interference and allocate resources for downlink based on the prediction results. EMD is used to decompose the past interference values faced by the user equipment. Long short-term memory and auto-regressive integrated moving average methods are used to predict the decomposed components. The final predicted interference value is reconstructed using individual predicted values of decomposed components. It is found that such a decomposition-based prediction method reduces the root mean squared error of the prediction by $20 - 25\%$. The proposed resource allocation algorithm utilizing the EMD-based interference prediction was found to meet near-optimal allocation of resources and correspondingly results in $2-3$ orders of magnitude lower outage compared to state-of-the-art baseline prediction algorithm-based resource allocation.

eess.SP↗

arXiv2022

Permutation Matrix Modulation

We propose a novel scheme that allows MIMO system to modulate a set of permutation matrices to send more information bits, extending our initial work on the topic. This system is called Permutation Matrix Modulation (PMM). The basic idea is to employ a permutation matrix as a precoder and treat it as a modulated symbol. We continue the evolution of index modulation in MIMO by adopting all-antenna activation and obtaining a set of unique symbols from altering the positions of the antenna transmit power. We provide the analysis of the achievable rate of PMM under Gaussian Mixture Model (GMM) distribution \revv{and finite cardinality input (FCI). Numerical results are evaluated by comparing PMM with the other existing systems.} We also present a way to attain the optimal achievable rate of PMM by solving a maximization problem via interior-point method. A low complexity detection scheme based on zero-forcing (ZF) is proposed, and maximum likelihood (ML) detection is discussed. We demonstrate the trade-off between simulation of the symbol error rate (SER) and the computational complexity where ZF performs worse in the SER simulation but requires much less computational complexity than ML.

cs.IT↗

arXiv2022

Graph Representation Learning for Wireless Communications

Wireless networks are inherently graph-structured, which can be utilized in graph representation learning to solve complex wireless network optimization problems. In graph representation learning, feature vectors for each entity in the network are calculated such that they capture spatial and temporal dependencies in their local and global neighbourhoods. Graph neural networks (GNNs) are powerful tools to solve these complex problems because of their expressive representation and reasoning power. In this paper, the potential of graph representation learning and GNNs in wireless networks is presented. An overview of graph learning is provided which covers the fundamentals and concepts such as feature design over graphs, GNNs, and their design principles. Potential of graph representation learning in wireless networks is presented via few exemplary use cases and some initial results on the GNN-based access point selection for cell-free massive MIMO systems.

cs.IT↗

arXiv2021

Deep Neural Network-Based Blind Multiple User Detection for Grant-free Multi-User Shared Access

Multi-user shared access (MUSA) is introduced as advanced code domain non-orthogonal complex spreading sequences to support a massive number of machine-type communications (MTC) devices. In this paper, we propose a novel deep neural network (DNN)-based multiple user detection (MUD) for grant-free MUSA systems. The DNN-based MUD model determines the structure of the sensing matrix, randomly distributed noise, and inter-device interference during the training phase of the model by several hidden nodes, neuron activation units, and a fit loss function. The thoroughly learned DNN model is capable of distinguishing the active devices of the received signal without any a priori knowledge of the device sparsity level and the channel state information. Our numerical evaluation shows that with a higher percentage of active devices, the DNN-MUD achieves a significantly increased probability of detection compared to the conventional approaches.

cs.IT↗

arXiv2021

Deep Learning-Based Active User Detection for Grant-free SCMA Systems

Grant-free random access and uplink non-orthogonal multiple access (NOMA) have been introduced to reduce transmission latency and signaling overhead in massive machine-type communication (mMTC). In this paper, we propose two novel group-based deep neural network active user detection (AUD) schemes for the grant-free sparse code multiple access (SCMA) system in mMTC uplink framework. The proposed AUD schemes learn the nonlinear mapping, i.e., multi-dimensional codebook structure and the channel characteristic. This is accomplished through the received signal which incorporates the sparse structure of device activity with the training dataset. Moreover, the offline pre-trained model is able to detect the active devices without any channel state information and prior knowledge of the device sparsity level. Simulation results show that with several active devices, the proposed schemes obtain more than twice the probability of detection compared to the conventional AUD schemes over the signal to noise ratio range of interest.

cs.IT↗

arXiv2021

Network Slicing for eMBB and mMTC with NOMA and Space Diversity Reception

In this work we study the coexistence in the same Radio Access Network (RAN) of two generic services present in the Fifth Generation (5G) of wireless communication systems: enhanced Mobile BroadBand (eMBB) and massive Machine-Type Communications (mMTC). eMBB services are requested for applications that demand extremely high data rates and moderate requirements on latency and reliability, whereas mMTC enables applications for connecting a massive number of low-power and low-complexity devices. The coexistence of both services is enabled by means of network slicing and Non-Orthogonal Multiple Access (NOMA) with Successive Interference Cancellation (SIC) decoding. Under the orthogonal slicing, the radio resources are exclusively allocated to each service, while in the non-orthogonal slicing the traffics from both services overlap in the same radio resources. We evaluate the uplink performance of both services in a scenario with a multi-antenna Base Station (BS). Our simulation results show that the performance gains obtained through multiple receive antennas are more accentuated for the non-orthogonal slicing than for the orthogonal allocation of resources, such that the non-orthogonal slicing outperforms its orthogonal counterpart in terms of achievable data rates or number of connected devices as the number of receive antennas increases.

eess.SP↗

arXiv2021

Non-Orthogonal Multiple Access and Network Slicing: Scalable Coexistence of eMBB and URLLC

The 5G systems will feature three generic services: enhanced Mobile BroadBand (eMBB), massive Machine-Type Communications (mMTC) and Ultra-Reliable and Low-Latency Communications (URLLC). The diverse requirements of these services in terms of data-rates, number of connected devices, latency and reliability can lead to a sub-optimal use of the 5G network, thus network slicing is proposed as a solution that creates customized slices of the network specifically designed to meet the requirements of each service. Under the network slicing, the radio resources can be shared in orthogonal and non-orthogonal schemes. Motivated by Industrial Internet of Things (IIoT) scenarios where a large number of sensors may require connectivity with stringent requirements of latency and reliability, we propose the use of Non-Orthogonal Multiple Access (NOMA) to improve the number of URLLC users that are connected in the uplink to the same base station (BS), for both orthogonal and non-orthogonal network slicing with eMBB users. The multiple URLLC users transmit simultaneously and across multiple frequency channels. We set the reliability requirements for the two services and analyze their pair of sum rates. We show that, even with overlapping transmissions from multiple eMBB and URLLC users, the use of NOMA techniques allows us to guarantee the reliability requirements for both services.

eess.SP↗

arXiv2019

Network Slicing for Vehicular Communication

Ultra-reliable vehicle-to-everything (V2X) communication is essential for enabling the next generation of intelligent vehicles. V2X communication is a growing area of communication, that connects vehicles to neighboring vehicles (V2V), infrastructure (V2I) and pedestrians (V2P). Network slicing is one of the promising technology for connectivity of the next generation devices, creating several logical networks on a common and programmable physical infrastructure. Network slicing offers an efficient way to satisfy the diverse use case requirements by exploiting the benefits of shared physical infrastructure. In this regard, we propose a network slicing based communication solution for vehicular networks. In this work, we model a highway scenario with vehicles having heterogeneous traffic demands. The autonomous driving slice (safety messages) and the infotainment slice (video stream) are the two logical slices created on a common infrastructure. We formulated a network clustering and slicing algorithm to partition the vehicles into different clusters and allocate slice leaders to each cluster. Slice leaders serve its clustered vehicles with high quality V2V links and forwards safety information with low latency. On the other hand, road side unit provides infotainment service using high quality V2I links. An extensive Long Term Evolution Advanced (LTE-A) system level simulator with enhancement of cellular V2X (C-V2X) standard is used to evaluate the performance of the proposed method, in which it is shown that the proposed network slicing technique achieves low latency and high-reliability communication.

cs.NI↗