arXiv subjects

Matti Latva-aho

Publications and source records attributed to Matti Latva-aho.

At least 73 records · Page 4Linked to original sources

arXiv2023

High-Throughput Rate-Flexible Combinational Decoders for Multi-Kernel Polar Codes

Polar codes have received growing attention in the past decade and have been selected as the coding scheme for the control channel in the fifth generation (5G) wireless communication systems. However, the conventional polar codes have only been constructed by binary (2x2) kernel which poses block length limitation to powers of 2. To attain more flexible block lengths, multi-kernel polar codes are proposed. In this paper, a combinational architecture for multi-kernel polar codes with high throughput is proposed based on successive cancellation decoding algorithm. The proposed scheme can decode pure-binary, pure-ternary (3x3), and binary-ternary mixed polar codes. The decoder's architecture is rate-flexible meaning that a new code rate can be assigned to the decoder at every clock cycle. The proposed architecture is validated by FPGA implementation and the results reveal that a code of size N=81 gains the coded throughput of 1664.5 Mbps. A novel Python-based polar compiler is also proposed to automatically generate the HDL modules for target decoders. A designer can input the target block length and kernel ordering of a polar code, and get the required VHDL files automatically. Based on our simulations, the majority of the required HDL files can be generated in less than 0.4 seconds.

cs.IT↗

arXiv2022

Reconfigurable Intelligent Surfaces: The New Frontier of Next G Security

RIS is one of the significant technological advancements that will mark next-generation wireless. RIS technology also opens up the possibility of new security threats, since the reflection of impinging signals can be used for malicious purposes. This article introduces the basic concept for a RIS-assisted attack that re-uses the legitimate signal towards a malicious objective. Specific attacks are identified from this base scenario, and the RIS-assisted signal cancellation attack is selected for evaluation as an attack that inherently exploits RIS capabilities. The key takeaway from the evaluation is that an effective attack requires accurate channel information, a RIS deployed in a favorable location (from the point of view of the attacker), and it disproportionately affects legitimate links that already suffer from reduced path loss. These observations motivate specific security solutions and recommendations for future work.

cs.CR↗

arXiv2022

A Learning-Based Trajectory Planning of Multiple UAVs for AoI Minimization in IoT Networks

Many emerging Internet of Things (IoT) applications rely on information collected by sensor nodes where the freshness of information is an important criterion. \textit{Age of Information} (AoI) is a metric that quantifies information timeliness, i.e., the freshness of the received information or status update. This work considers a setup of deployed sensors in an IoT network, where multiple unmanned aerial vehicles (UAVs) serve as mobile relay nodes between the sensors and the base station. We formulate an optimization problem to jointly plan the UAVs' trajectory, while minimizing the AoI of the received messages. This ensures that the received information at the base station is as fresh as possible. The complex optimization problem is efficiently solved using a deep reinforcement learning (DRL) algorithm. In particular, we propose a deep Q-network, which works as a function approximation to estimate the state-action value function. The proposed scheme is quick to converge and results in a lower AoI than the random walk scheme. Our proposed algorithm reduces the average age by approximately $25\%$ and requires down to $50\%$ less energy when compared to the baseline scheme.

cs.AI↗

arXiv2022

A Functional Architecture for 6G Special Purpose Industrial IoT Networks

Future industrial applications will encompass compelling new use cases requiring stringent performance guarantees over multiple key performance indicators (KPI) such as reliability, dependability, latency, time synchronization, security, etc. Achieving such stringent and diverse service requirements necessitates the design of a special-purpose Industrial Internet of Things (IIoT) network comprising a multitude of specialized functionalities and technological enablers. This article proposes an innovative architecture for such a special-purpose 6G IIoT network incorporating seven functional building blocks categorized into: special-purpose functionalities and enabling technologies. The former consists of Wireless Environment Control, Traffic/Channel Prediction, Proactive Resource Management and End-to-End Optimization functions; whereas the latter includes Synchronization and Coordination, Machine Learning and Artificial Intelligence Algorithms, and Auxiliary Functions. The proposed architecture aims at providing a resource-efficient and holistic solution for the complex and dynamically challenging requirements imposed by future 6G industrial use cases. Selected test scenarios are provided and assessed to illustrate cross-functional collaboration and demonstrate the applicability of the proposed architecture in a wireless IIoT network.

cs.NI↗

arXiv2022

Beyond 5G URLLC Evolution: New Service Modes and Practical Considerations

Ultra-reliable low latency communications (URLLC) arose to serve industrial IoT (IIoT) use cases within the 5G. Currently, it has inherent limitations to support future services. Based on state-of-the-art research and practical deployment experience, in this article, we introduce and advocate for three variants: broadband, scalable and extreme URLLC. We discuss use cases and key performance indicators and identify technology enablers for the new service modes. We bring practical considerations from the IIoT testbed and provide an outlook toward some new research directions.

cs.NI↗

arXiv2022

Constrained Deep Reinforcement Based Functional Split Optimization in Virtualized RANs

In virtualized radio access network (vRAN), the base station (BS) functions are decomposed into virtualized components that can be hosted at the centralized unit or distributed units through functional splits. Such flexibility has many benefits; however, it also requires solving the problem of finding the optimal splits of functions of the BSs in such a way that minimizes the total network cost. The underlying vRAN system is complex and precise modelling of it is not trivial. Formulating the functional split problem to minimize the cost results in a combinatorial problem that is provably NP-hard, and solving it is computationally expensive. In this paper, a constrained deep reinforcement learning (RL) approach is proposed to solve the problem with minimal assumptions about the underlying system. Since in deep RL, the action selection is the outcome of inference of a neural network, it can be done in real-time while training to update the neural networks can be done in the background. However, since the problem is combinatorial, even for a small number of functions, the action space of the RL problem becomes large. Therefore, to deal with such a large action space, a chain rule-based stochastic policy is exploited in which a long short-term memory (LSTM) network-based sequence-to-sequence model is applied to estimate the policy that is selecting the functional split actions. However, the utilized policy is still limited to an unconstrained problem, and each split decision is bounded by vRAN's constraint requirements. Hence, a constrained policy gradient method is leveraged to train and guide the policy toward constraint satisfaction. Further, a search strategy by greedy decoding or temperature sampling is utilized to improve the optimality performance at the test time. Simulations are performed to evaluate the performance of the proposed solution using synthetic and real network datasets.

cs.NI↗

arXiv2022

Joint Sum Rate and Blocklength Optimization in RIS-aided Short Packet URLLC Systems

In this paper, a multi-objective optimization problem (MOOP) is proposed for maximizing the achievable finite blocklength (FBL) rate while minimizing the utilized channel blocklengths (CBLs) in a reconfigurable intelligent surface (RIS)-assisted short packet communication system. The formulated MOOP has two objective functions namely maximizing the total FBL rate with a target error probability, and minimizing the total utilized CBLs which is directly proportional to the transmission duration. The considered MOOP variables are the base station (BS) transmit power, number of CBLs, and passive beamforming at the RIS. Since the proposed non-convex problem is intractable to solve, the Tchebyshev method is invoked to transform it into a single-objective OP, then the alternating optimization (AO) technique is employed to iteratively obtain optimized parameters in three main sub-problems. The numerical results show a fundamental trade-off between maximizing the achievable rate in the FBL regime and reducing the transmission duration. Also, the applicability of RIS technology is emphasized in reducing the utilized CBLs while increasing the achievable rate significantly.

cs.IT↗

arXiv2022

Learning-Based Orchestration for Dynamic Functional Split and Resource Allocation in vRANs

One of the key benefits of virtualized radio access networks (vRANs) is network management flexibility. However, this versatility raises previously-unseen network management challenges. In this paper, a learning-based zero-touch vRAN orchestration framework (LOFV) is proposed to jointly select the functional splits and allocate the virtualized resources to minimize the long-term management cost. First, testbed measurements of the behaviour between the users' demand and the virtualized resource utilization are collected using a centralized RAN system. The collected data reveals that there are non-linear and non-monotonic relationships between demand and resource utilization. Then, a comprehensive cost model is proposed that takes resource overprovisioning, declined demand, instantiation and reconfiguration into account. Moreover, the proposed cost model also captures different routing and computing costs for each split. Motivated by our measurement insights and cost model, LOFV is developed using a model-free reinforcement learning paradigm. The proposed solution is constructed from a combination of deep Q-learning and a regression-based neural network that maps the network state and users' demand into split and resource control decisions. Our numerical evaluations show that LOFV can offer cost savings by up to 69\% of the optimal static policy and 45\% of the optimal fully dynamic policy.

cs.NI↗

arXiv2022

Coordinated Pilot Transmissions for Detecting the Signal Sparsity Level in a Massive IoT Network under Rayleigh Fading

Grant-free protocols exploiting compressed sensing (CS) multi-user detection (MUD) are appealing for solving the random access problem in massive machine-type communications (mMTC) with sporadic device activity. Such protocols would greatly benefit from a prior deterministic knowledge of the sparsity level, i.e., instantaneous number of simultaneously active devices $K$. Aiming at this, herein we introduce a framework relying on coordinated pilot transmissions (CPT) over a short phase at the beginning of the transmission block for detecting $K$ in mMTC scenarios under Rayleigh fading. CPT can be implemented either as: i) U-CPT, which exploits only uplink transmissions, or A-CPT, which includes also downlink transmissions for channel state information (CSI) acquisition that resolve fading uncertainty. We discuss two specific implementations of A-CPT: ii) A-CPT-F, which implements CSI-based phase corrections while leveraging the same statistical inverse power control used by U-CPT, and iii) A-CPT-D, which implements a dynamic CSI-based inverse power control, although it requires some active devices to remain in silence if their corresponding channels are too faded. We derive a signal sparsity level detector for each CPT mechanism by relaxing the original integer detection/classification problem to an estimation problem in the continuous real domain followed by a rounding operation. We show that the variance of the relaxed estimator increases with $K^2$ and $K$ when operating with U-CPT and A-CPT mechanisms, respectively. The distribution of the estimators under U-CPT, A-CPT-F and A-CPT-D is found to follow an exponential, Gaussian, and Student's $t-$like distribution, respectively. Analyses evince the superiority of A-CPT-D, which is also corroborated via numerical results. We reveal several interesting trade-offs and highlight potential research directions.

cs.IT↗

arXiv2022

Deep Reinforcement Learning for Practical Phase Shift Optimization in RIS-aided MISO URLLC Systems

We study the joint active/passive beamforming and channel blocklength (CBL) allocation in a non-ideal reconfigurable intelligent surface (RIS)-aided ultra-reliable and low-latency communication (URLLC) system. The considered scenario is a finite blocklength (FBL) regime and the problem is solved by leveraging a novel deep reinforcement learning (DRL) algorithm named twin-delayed deep deterministic policy gradient (TD3). First, assuming an industrial automation system with multiple actuators, the signal-to-interference-plus-noise ratio and achievable rate in the FBL regime are identified for each actuator in terms of the phase shift configuration matrix at the RIS. Next, the joint active/passive beamforming and CBL optimization problem is formulated where the objective is to maximize the total achievable FBL rate in all actuators, subject to non-linear amplitude response at the RIS elements, BS transmit power budget, and total available CBL. Since the amplitude response equality constraint is highly non-convex and non-linear, we resort to employing an actor-critic policy gradient DRL algorithm based on TD3. The considered method relies on interacting RIS with the industrial automation environment by taking actions which are the phase shifts at the RIS elements, CBL variables, and BS beamforming to maximize the expected observed reward, i.e., the total FBL rate. We assess the performance loss of the system when the RIS is non-ideal, i.e., with non-linear amplitude response, and compare it with ideal RIS without impairments. The numerical results show that optimizing the RIS phase shifts, BS beamforming, and CBL variables via the proposed TD3 method is highly beneficial to improving the network total FBL rate as the proposed method with deterministic policy outperforms conventional methods.

cs.IT↗

arXiv2022

Massive MIMO with Radio Stripes for Indoor Wireless Energy Transfer

Radio frequency wireless energy transfer (WET) is a promising solution for powering autonomous Internet of Things (IoT) deployments. In this work, we leverage energy beamforming for powering multiple user equipments (UEs) with stringent energy harvesting (EH) demands in an indoor distributed massive multiple-input multiple-output system. Based on semi-definite programming, successive convex approximation (SCA), and maximum ratio transmission (MRT) techniques, we derive optimal and sub-optimal precoders aimed at minimizing the radio stripes' transmit power while exploiting information of the power transfer efficiency of the EH circuits at the UEs. Moreover, we propose an analytical framework to assess and control the electromagnetic field (EMF) radiation exposure in the considered indoor scenario. Numerical results show that i) the EMF radiation exposure can be more easily controlled at higher frequencies at the cost of a higher transmit power consumption, ii) training is not a very critical factor for the considered indoor system, iii) MRT/SCA-based precoders are particularly appealing when serving a small number of UEs, thus, especially suitable for implementation in a time domain multiple access (TDMA) scheduling framework, and iv) TDMA is more efficient than spatial domain multiple access (SDMA) when serving a relatively small number of UEs. Results suggest that additional boosting performance strategies are needed to increase the overall system efficiency, thus making the technology viable in practice.

cs.IT↗

arXiv2022

Supervised Learning based Sparse Channel Estimation for RIS aided Communications

An reconfigurable intelligent surface (RIS) can be used to establish line-of-sight (LoS) communication when the direct path is compromised, which is a common occurrence in a millimeter wave (mmWave) network. In this paper, we focus on the uplink channel estimation of a such network. We formulate this as a sparse signal recovery problem, by discretizing the angle of arrivals (AoAs) at the base station (BS). On-grid and off-grid AoAs are considered separately. In the on-grid case, we propose an algorithm to estimate the direct and RIS channels. Neural networks trained based on supervised learning is used to estimate the residual angles in the off-grid case, and the AoAs in both cases. Numerical results show the performance gains of the proposed algorithms in both cases.

eess.SP↗

arXiv2021

Dynamic RF Combining for Multi-Antenna Ambient Energy Harvesting

Ambient radio frequency (RF) energy harvesting (EH) technology is key to realize self-sustainable, always-on, low-power, massive Internet of Things networks. Typically, rigid (non-adaptable to channel fluctuations) multi-antenna receive architectures are proposed to support reliable EH operation. Herein, we introduce a dynamic RF combining architecture for ambient RF EH use cases, and exemplify the attainable performance gains via three simple phase shifts' exploration mechanisms, namely, brute force (BF), sequential testing (ST) and codebook based (CB). Among the proposed mechanisms, BF demands the highest power consumption, while CB requires the highest-resolution phase shifters, thus tipping the scales in favor of ST. Finally, we show that the performance gains of ST over a rigid RF combining scheme increase with the number of receive antennas and energy transmitters' deployment density.

cs.PF↗

arXiv2021

A Nonlinear Autoregressive Neural Network for Interference Prediction and Resource Allocation in URLLC Scenarios

Ultra reliable low latency communications (URLLC) is a new service class introduced in 5G which is characterized by strict reliability $(1-10^{-5})$ and low latency requirements (1 ms). To meet these requisites, several strategies like overprovisioning of resources and channel-predictive algorithms have been developed. This paper describes the application of a Nonlinear Autoregressive Neural Network (NARNN) as a novel approach to forecast interference levels in a wireless system for the purpose of efficient resource allocation. Accurate interference forecasts also grant the possibility of meeting specific outage probability requirements in URLLC scenarios. Performance of this proposal is evaluated upon the basis of NARNN predictions accuracy and system resource usage. Our proposed approach achieved a promising mean absolute percentage error of 7.8 % on interference predictions and also reduced the resource usage in up to 15 % when compared to a recently proposed interference prediction algorithm.

eess.SP↗

arXiv2021

Self-energy recycling for low-power reliable networks: Half-duplex or Full-duplex?

Self-energy recycling (sER), which allows transmit energy re-utilization, has emerged as a viable option for improving the energy efficiency (EE) in low-power Internet of Things networks. In this work, we investigate its benefits also in terms of reliability improvements and compare the performance of full-duplex (FD) and half-duplex (HD) schemes when using multi-antenna techniques in a communication system. We analyze the trade-offs when considering not only the energy spent on transmission but also the circuitry power consumption, thus making the analysis of much more practical interest. In addition to the well known spectral efficiency improvements, results show that FD also outperforms HD in terms of reliability. We show that sER introduces not only benefits in EE matters but also some modifications on how to achieve maximum reliability fairness between uplink and downlink transmissions, which is the main goal in this work. In order to achieve this objective, we propose the use of a dynamic FD scheme where the small base station (SBS) determines the optimal allocation of antennas for transmission and reception. We show the significant improvement gains of this strategy for the system outage probability when compared to the simple HD and FD schemes.

cs.NI↗

arXiv2021

LiDAR Aided Human Blockage Prediction for 6G

Leveraging higher frequencies up to THz band paves the way towards a faster network in the next generation of wireless communications. However, such shorter wavelengths are susceptible to higher scattering and path loss forcing the link to depend predominantly on the line-of-sight (LOS) path. Dynamic movement of humans has been identified as a major source of blockages to such LOS links. In this work, we aim to overcome this challenge by predicting human blockages to the LOS link enabling the transmitter to anticipate the blockage and act intelligently. We propose an end-to-end system of infrastructure-mounted LiDAR sensors to capture the dynamics of the communication environment visually, process the data with deep learning and ray casting techniques to predict future blockages. Experiments indicate that the system achieves an accuracy of 87% predicting the upcoming blockages while maintaining a precision of 78% and a recall of 79% for a window of 300 ms.

eess.SP↗

arXiv2021

Graph Neural Network Based Access Point Selection for Cell-Free Massive MIMO Systems

A graph neural network (GNN) based access point (AP) selection algorithm for cell-free massive multiple-input multiple-output (MIMO) systems is proposed. Two graphs, a homogeneous graph which includes only AP nodes representing the structure of the APs in the network, and a heterogeneous graph which includes both AP nodes and user equipment (UE) nodes are constructed to represent a cell-free massive MIMO network. A GNN based on the inductive graph learning framework GraphSAGE is used to obtain the embeddings which are then used to predict the links between the nodes. The numerical results show that compared to the proximity-based AP selection algorithms, the proposed GNN based algorithm predicts the potential APs with more accuracy. Compared to the large scale fading coefficient based AP selection algorithms, the proposed algorithm does not require measured and sorted signal strengths of all the neighbouring APs. Furthermore, the proposed algorithm is scalable in terms of the number of users in the cell-free system.

cs.IT↗

arXiv2021

CSI-free Rotary Antenna Beamforming for Massive RF Wireless Energy Transfer

Radio frequency (RF) wireless energy transfer (WET) is a key technology that may allow seamlessly powering future massive low-energy Internet of Things (IoT) networks. To enable efficient massive WET, channel state information (CSI)-limited/free multi-antenna transmit schemes have been recently proposed in the literature. The idea is to reduce/null the energy costs to be paid by energy harvesting (EH) IoT nodes from participating in large-scale time/power-consuming CSI training, but still enable some transmit spatial gains. In this paper, we take another step forward by proposing a novel CSI-free rotary antenna beamforming (RAB) WET scheme that outperforms all state-of-the-art CSI-free schemes in a scenario where a power beacon (PB) equipped with a uniform linear array (ULA) powers a large set of surrounding EH IoT devices. RAB uses a properly designed CSI-free beamformer combined with a continuous or periodic rotation of the ULA at the PB to provide average EH gains that scale as $0.85\sqrt{M}$, where $M$ is the number of PB's antenna elements. Moreover, a rotation-specific power control mechanism was proposed to i) fairly optimize the WET process if devices' positioning information is available, and/or ii) to avoid hazards to human health in terms of specific absorption rate (SAR). We show that RAB performance even approaches quickly (or surpasses, for scenarios with sufficiently large number of EH devices, or when using the proposed power control) the performance of a traditional full-CSI based transmit scheme, and it is also less sensitive to SAR constraints. Finally, we discuss important practicalities related to RAB such as its robustness against non line-of-sight conditions compared to other CSI-free WET schemes, and its generalizability to scenarios where the PB uses other than a ULA topology.

cs.IT↗