arXiv subjects

Mattia Barbanera

Publications and source records attributed to Mattia Barbanera.

8 recordsLinked to original sources

arXiv2026

Design and Performance of the Upgraded Prototype Schwarzschild-Couder Telescope Camera Module

The Cherenkov Telescope Array Observatory (CTAO) is a ground-based observatory that will improve upon the sensitivities of the current generation of very-high-energy gamma-ray instruments. The Schwarzschild-Couder Telescope (SCT) is a dual-mirror candidate design for a CTAO Medium-Sized Telescope (MST). The prototype Schwarzschild-Couder Telescope (pSCT) was inaugurated in 2019 at Fred Lawrence Whipple Observatory (FLWO) in Arizona and observed significant gamma-ray emission from the Crab Nebula with a partially populated camera. The pSCT camera is currently being upgraded to fully instrument the focal plane with 11,328 silicon photomultiplier (SiPM) pixels split between 177 camera modules. Additionally, the modules will feature upgraded electronics designed to reduce electronics crosstalk and noise. A module calibration procedure has been developed using a preproduction test module. Following this calibration procedure, performance testing shows that the upgrade module has low noise, minimal electronics crosstalk, and excellent charge resolution. After calibration and optimization, the 177 production modules will be installed in the pSCT camera for commissioning. This will be followed by observations of known VHE gamma-ray sources for camera performance validation.

astro-ph.IM↗

arXiv2026

Measurement of 80-200 MeV/n $^{16}$O nuclear cross-section on Carbon and Polyethylene targets with the nuclear emulsion detector of the FOOT experiment

Accurate knowledge of nuclear fragmentation cross-sections is essential for optimizing charged particle therapy. In this study, conducted within the framework of the FOOT (FragmentatiOn Of Target) experiment, we present the first measurements with a large angular acceptance of total charge-changing cross-section and the cross-section for the production of fragments (production cross-section) for $^{16}$O ions interacting with Carbon (C) and Polyethylene (C$_2$H$_4$) targets in the kinetic energy range of 80 to 200 MeV/nucleon. Measurements were performed using the Emulsion Cloud Chamber (ECC) technique, which combines high spatial resolution and angular acceptance, up to 45$^\circ$. The results are compared with Monte Carlo model predictions. Moreover, the total charge-changing and fragment production cross-sections for $^{16}$O on Hydrogen in the same energy range are derived.

nucl-ex↗

arXiv2026

A Telescope System for Charge and Position Measurement of High Energy Nuclei

A high-granularity telescope system with a large sensitive area and low material budget has been developed for high-energy heavy ion beam tests. The telescope consists of nine layers of silicon microstrip detectors (SSDs), whose performance was validated through a heavy ion beam test at the CERN SPS. A hybrid machine learning algorithm is proposed to address the challenges of nuclear charge measurement with SSDs. The system achieves a spatial resolution of $\mathcal{O}(1) \,$\SI{}{\micro\metre} and a charge resolution better than 0.16 charge units for nuclei from $Z = 1$ to $Z = 29$, with a sensitive area of $8 \times 8 \, \mathrm{cm}^2$. To the best of our knowledge, this represents the most precise charge and spatial resolution simultaneously achieved by a silicon telescope to date.

physics.ins-det↗

arXiv2026

Beam Test Characterization of Silicon Microstrip Detector Flight-Model Ladders for the AMS-02 Upgrade

The AMS-02 experiment plans to install a new silicon microstrip tracker layer (Layer-0) on top of the existing detector, increasing the cosmic-ray acceptance by a factor of 3. Layer-0 employs a design in which multiple silicon microstrip detectors (SSDs) are connected in series to form long detector ladders. We present a detailed performance study of the flight-model ladders using a 350~GeV mixed hadron beam at the CERN SPS. The study focuses on the following aspects: (i) the performance of ladders with different numbers of SSDs, for which the intrinsic spatial resolution at normal incidence varies from $9.5~μ\mathrm{m}$ to $11.4~μ\mathrm{m}$ for ladders composed of 8 to 12 SSDs; (ii) the response consistency for particles impacting on the \emph{Head} and \emph{Tail} regions of the ladder; and (iii) the dependence of the detector performance on the particle incidence angle.

physics.ins-det↗

arXiv2025

A Silicon Microstrip Detector for Power-Limited and Large Sensitive Area Applications

A silicon microstrip detector (SSD) has been developed to have state of the art spatial resolution and a large sensitive area under stringent power constraints. The design incorporates three floating strips with their bias resistors inserted between two aluminum readout strips. Beam test measurements with the single sensor confirmed that this configuration achieves a total detection efficiency of $99.8 \, \%$ and spatial resolution $7.6 \, \mathrm{μm}$ for MIPs. A double-$η$ algorithm was developed to optimize hit position reconstruction for this SSD. The design can be adapted for large area silicon detectors.

physics.ins-det↗

arXiv2022

Calibration of the IXPE focal plane X-ray polarimeters to polarized radiation

IXPE (Imaging X-ray Polarimetry Explorer) is a NASA Small Explorer mission -- in partnership with the Italian Space Agency (ASI) -- dedicated to X-ray polarimetry in the 2--8 keV energy band. The IXPE telescope comprises three grazing incidence mirror modules coupled to three detector units hosting each one a Gas Pixel Detector (GPD), a gas detector that allows measuring the polarization degree by using the photoelectric effect. A wide and accurate ground calibration was carried out on the IXPE Detector Units (DUs) at INAF-IAPS, in Italy, where a dedicated facility was set-up at this aim. In this paper, we present the results obtained from this calibration campaign to study the IXPE focal plane detector response to polarized radiation. In particular, we report on the modulation factor, which is the main parameter to estimate the sensitivity of a polarimeter.

astro-ph.IM↗

arXiv2021

The Imaging X-Ray Polarimetry Explorer (IXPE): Pre-Launch

Scheduled to launch in late 2021, the Imaging X-ray Polarimetry Explorer (IXPE) is a NASA Small Explorer Mission in collaboration with the Italian Space Agency (ASI). The mission will open a new window of investigation - imaging X-ray polarimetry. The observatory features 3 identical telescopes each consisting of a mirror module assembly with a polarization-sensitive imaging X-ray detector at the focus. A coilable boom, deployed on orbit, provides the necessary 4-m focal length. The observatory utilizes a 3-axis-stabilized spacecraft which provides services such as power, attitude determination and control, commanding, and telemetry to the ground. During its 2-year baseline mission, IXPE will conduct precise polarimetry for samples of multiple categories of X-ray sources, with follow-on observations of selected targets.

astro-ph.IM↗

arXiv2021

The Instrument of the Imaging X-ray Polarimetry Explorer

While X-ray Spectroscopy, Timing and Imaging have improved verymuch since 1962, when the first astronomical non-solar source was discovered, especially with the launch of Newton/X-ray Multi-Mirror Mission, Rossi/X-ray Timing Explorer and Chandra/Advanced X-ray Astrophysics Facility, the progress of X-ray polarimetry has been meager. This is in part due to the lack of sensitive polarization detectors, in part due to the fate of approved missions and in part because the celestial X-ray sources appeared less polarized than expected. Only one positive measurement has been available until now. Indeed the eight Orbiting Solar Observatory measured the polarization of the Crab nebula in the 70s. The advent of techniques of microelectronics allowed for designing a detector based on the photoelectric effect in gas in an energy range where the optics are efficient in focusing X-rays. Herewe describe the Instrument, which is the major contribution of the Italian collaboration to the SmallExplorer mission called IXPE, the Imaging X-ray Polarimetry Explorer, which will be flown in late 2021. The instrument, is composed of three Detector Units, based on this technique, and a Detector Service Unit. Three Mirror Modules provided by Marshall Space Flight Center focus X-rays onto the detectors. In the following we will show the technological choices, their scientific motivation and the results from the calibration of the Instrument. IXPE will perform imaging, timing and energy resolved polarimetry in the 2-8 keV energy band opening this window of X-ray astronomy to tens of celestial sources of almost all classes.

astro-ph.IM↗