arXiv subjects

Mattia Merluzzi

Publications and source records attributed to Mattia Merluzzi.

31 records · Page 2Linked to original sources

arXiv2023

Goal-oriented Communications for the IoT: System Design and Adaptive Resource Optimization

Internet of Things (IoT) applications combine sensing, wireless communication, intelligence, and actuation, enabling the interaction among heterogeneous devices that collect and process considerable amounts of data. However, the effectiveness of IoT applications needs to face the limitation of available resources, including spectrum, energy, computing, learning and inference capabilities. This paper challenges the prevailing approach to IoT communication, which prioritizes the usage of resources in order to guarantee perfect recovery, at the bit level, of the data transmitted by the sensors to the central unit. We propose a novel approach, called goal-oriented (GO) IoT system design, that transcends traditional bit-related metrics and focuses directly on the fulfillment of the goal motivating the exchange of data. The improvement is then achieved through a comprehensive system optimization, integrating sensing, communication, computation, learning, and control. We provide numerical results demonstrating the practical applications of our methodology in compelling use cases such as edge inference, cooperative sensing, and federated learning. These examples highlight the effectiveness and real-world implications of our proposed approach, with the potential to revolutionize IoT systems.

eess.SP↗

arXiv2023

6G goal-oriented communications: How to coexist with legacy systems?

6G will connect heterogeneous intelligent agents to make them operate complex cooperative tasks. When connecting intelligence, two main research questions arise to identify how AI and ML models behave depending on: i) their input data quality, affected by errors induced by interference and additive noise during wireless communication; ii) their contextual effectiveness and resilience to interpret and exploit the meaning behind the data. Both questions are within the realm of semantic and goal-oriented communications. With this paper we investigate how to effectively share spectrum resources between a legacy communication system and a new goal-oriented edge intelligence one. Specifically, we address the scenario of an eMBB service, i.e., a user uploading a video stream, interfering with an edge inference system, in which a user uploads images to a Mobile Edge Host that runs a classification task. Our objective is to achieve, through cooperation, the highest eMBB service data rate, subject to a targeted goal-effectiveness of the edge inference service, namely the probability of confident inference on time. We first formalize a general definition of a goal in the context of wireless communications. This includes the goal-effectiveness, as well as that of goal cost . We argue and show, through numerical evaluations, that communication reliability and goal-effectiveness are not straightforwardly linked. Then, after a performance evaluation aiming to clarify the difference between communication performance and goal-effectiveness, a long-term optimization problem is formulated and solved via Lyapunov optimization tools, to guarantee the desired performance. Finally, our numerical results assess the advantages of the proposed optimization, and the superiority of the goal-oriented strategy against baseline 5G compliant legacy approaches, under both stationary and non-stationary environments.

eess.SP↗

arXiv2023

Lyapunov-Driven Deep Reinforcement Learning for Edge Inference Empowered by Reconfigurable Intelligent Surfaces

In this paper, we propose a novel algorithm for energy-efficient, low-latency, accurate inference at the wireless edge, in the context of 6G networks endowed with reconfigurable intelligent surfaces (RISs). We consider a scenario where new data are continuously generated/collected by a set of devices and are handled through a dynamic queueing system. Building on the marriage between Lyapunov stochastic optimization and deep reinforcement learning (DRL), we devise a dynamic learning algorithm that jointly optimizes the data compression scheme, the allocation of radio resources (i.e., power, transmission precoding), the computation resources (i.e., CPU cycles), and the RIS reflectivity parameters (i.e., phase shifts), with the aim of performing energy-efficient edge classification with end-to-end (E2E) delay and inference accuracy constraints. The proposed strategy enables dynamic control of the system and of the wireless propagation environment, performing a low-complexity optimization on a per-slot basis while dealing with time-varying radio channels and task arrivals, whose statistics are unknown. Numerical results assess the performance of the proposed RIS-empowered edge inference strategy in terms of trade-off between energy, delay, and accuracy of a classification task.

cs.IT↗

arXiv2022

Blue Communications for Edge Computing: the Reconfigurable Intelligent Surfaces Opportunity

Wireless traffic is exploding, due to the myriad of new connections and the exchange of capillary data at the edge of the networks to operate real-time processing and decision making. The latter especially affects the uplink traffic, which will grow in 6G and beyond networks, calling for new optimization metrics that include energy, service delay, and electromagnetic field (EMF) exposure (EMFE). To this end, reconfigurable intelligent surfaces (RISs) represent a promising solution to mitigate the EMFE, thanks to their ability of shaping and manipulating the impinging electromagnetic waves. In line with this vision, this paper proposes an online adaptive method to mitigate the EMFE under end-to-end delay constraints of a computation offloading service, in the context of RIS and multi-access edge computing (MEC)-aided wireless networks. The goal is to minimize the long-term average of the EMF human exposure under such constraints, investigating the advantages of RISs towards blue (i.e. low EMFE) communications. A multiple-input multiple-output (MIMO) system is investigated as part of the visions towards 6G. Focusing on a typical scenario of computation offloading, the method jointly and adaptively optimizes user precoding, transmit power, RIS reflectivity parameters, and receiver combiner, with theoretical guarantees on the desired long-term performance. Besides the theoretical results, numerical simulations assess the performance of the proposed algorithm, when exploiting accurate antenna patterns, thus showing the advantage of the RIS and that of our method, compared to benchmark solutions.

eess.SP↗

arXiv2022

Reconfigurable Intelligent Surface Aided Mobile Edge Computing over Intermittent mmWave Links

The advent of Reconfigurable Intelligent Surfaces (RISs) in wireless communication networks unlocks the way to support high frequency radio access (e.g. in millimeter wave) while overcoming their sensitivity to the presence of deep fading and blockages. In support of this vision, this work exhibits the forward-looking perception of using RIS to enhance the connectivity of the communication links in edge computing scenarios, to support computation offloading services. We consider a multi-user MIMO system, and we formulate a long-term optimization problem aiming to ensure a bounded end-to-end delay with the minimum users average transmit power, by jointly selecting uplink user precoding, RIS reflectivity parameters, and computation resources at a mobile edge host. Thanks to the marriage of Lyapunov stochastic optimization, projected gradient techniques and convex optimization, the problem is efficiently solved in a per-slot basis, requiring only the observation of instantaneous realizations of time-varying radio channels and task arrivals, and that of communication and computing buffers. Numerical simulations show the effectiveness of our method and the benefits of the RIS, in striking the best trade-off between power consumption and delay for different blocking conditions, also when different levels of channel knowledge are assumed.

cs.IT↗

arXiv2022

Energy-Efficient Dynamic Edge Computing with Electromagnetic Field Exposure Constraints

We present a dynamic resource allocation strategy for energy-efficient and Electromagnetic Field (EMF) exposure aware computation offloading at the wireless network edge. The goal is to maximize the overall system sum-rate of offloaded data, under stability (i.e. finite end-to-end delay), EMF exposure and system power constraints. The latter comprises end devices for uplink transmission and a Mobile Edge Host (MEH) for computation. Our proposed method, based on Lyapunov stochastic optimization, is able to achieve this goal with theoretical guarantees on asymptotic optimality, without any prior knowledge of wireless channel statistics. Although a complex long-term optimization problem is formulated, a per-slot optimization based on instantaneous realizations is derived. Moreover, the solution of the instantaneous problem is provided with closed form expressions and fast iterative procedures. Besides the theoretical analysis, numerical results assess the performance of the proposed strategy in striking the best trade-off between offloading sum-rate, power consumption, EMF exposure, and E2E delay. To the best of our knowledge, this is the first work addressing the problem of energy and exposure aware computation offloading.

eess.SP↗

arXiv2022

Energy-Efficient Classification at the Wireless Edge with Reliability Guarantees

Learning at the edge is a challenging task from several perspectives, since data must be collected by end devices (e.g. sensors), possibly pre-processed (e.g. data compression), and finally processed remotely to output the result of training and/or inference phases. This involves heterogeneous resources, such as radio, computing and learning related parameters. In this context, we propose an algorithm that dynamically selects data encoding scheme, local computing resources, uplink radio parameters, and remote computing resources, to perform a classification task with the minimum average end devices' energy consumption, under E2E delay and inference reliability constraints. Our method does not assume any prior knowledge of the statistics of time varying context parameters, while it only requires the solution of low complexity per-slot deterministic optimization problems, based on instantaneous observations of these parameters and that of properly defined state variables. Numerical results on convolutional neural network based image classification illustrate the effectiveness of our method in striking the best trade-off between energy, delay and inference reliability.

eess.SP↗

arXiv2022

Effective Goal-oriented 6G Communications: the Energy-aware Edge Inferencing Case

Currently, the world experiences an unprecedentedly increasing generation of application data, from sensor measurements to video streams, thanks to the extreme connectivity capability provided by 5G networks. Going beyond 5G technology, such data aim to be ingested by Artificial Intelligence (AI) functions instantiated in the network to facilitate informed decisions, essential for the operation of applications, such as automated driving and factory automation. Nonetheless, while computing platforms hosting Machine Learning (ML) models are ever powerful, their energy footprint is a key impeding factor towards realizing a wireless network as a sustainable intelligent platform. Focusing on a beyond 5G wireless network, overlaid by a Multi-access Edge Computing (MEC) infrastructure with inferencing capabilities, our paper tackles the problem of energy-aware dependable inference by considering inference effectiveness as value of a goal that needs to be accomplished by paying the minimum price in energy consumption. Both MEC-assisted standalone and ensemble inference options are evaluated. It is shown that, for some system scenarios, goal effectiveness above 84% is achieved and sustained even by relaxing communication reliability requirements by one decimal digit, while enjoying a device radio energy consumption reduction of almost 23% at the same time. Also, ensemble inference is shown to improve system-wide energy efficiency and even achieve higher goal effectiveness, as compared to the standalone case for some system parameterizations.

eess.SP↗

arXiv2021

Dynamic Edge Computing empowered by Reconfigurable Intelligent Surfaces

In this paper, we propose a novel algorithm for energy-efficient, low-latency dynamic mobile edge computing (MEC), in the context of beyond 5G networks endowed with Reconfigurable Intelligent Surfaces (RISs). In our setting, new computing requests are continuously generated by a set of devices and are handled through a dynamic queueing system. Building on stochastic optimization tools, we devise a dynamic learning algorithm that jointly optimizes the allocation of radio resources (i.e., power, transmission rates, sleep mode and duty cycle), computation resources (i.e., CPU cycles), and RIS reflectivity parameters (i.e., phase shifts), while guaranteeing a target performance in terms of average end-to-end (E2E) delay. The proposed strategy is dynamic, since it performs a low-complexity optimization on a per-slot basis while dealing with time-varying radio channels and task arrivals, whose statistics are unknown. The presence and optimization of RISs helps boosting the performance of dynamic MEC, thanks to the capability to shape and adapt the wireless propagation environment. Numerical results assess the performance in terms of service delay, learning, and adaptation capabilities of the proposed strategy for RIS empowered MEC.

eess.SP↗

arXiv2021

Discontinuous Computation Offloading for Energy-Efficient Mobile Edge Computing

We propose a novel strategy for energy-efficient dynamic computation offloading, in the context of edge-computing-aided beyond 5G networks. The goal is to minimize the energy consumption of the overall system, comprising multiple User Equipment (UE), an access point (AP), and an edge server (ES), under constraints on the end-to-end service delay and the packet error rate performance over the wireless interface. To reduce the energy consumption, we exploit low-power sleep operation modes for the users, the AP and the ES, shifting the edge computing paradigm from an always on to an always available architecture, capable of guaranteeing an on-demand target service quality with the minimum energy consumption. To this aim, we propose an online algorithm for dynamic and optimal orchestration of radio and computational resources called Discontinuous Computation Offloading (DisCO). In such a framework, end-to-end delay constraints translate into constraints on overall queueing delays, including both the communication and the computation phases of the offloading service. DisCO hinges on Lyapunov stochastic optimization, does not require any prior knowledge on the statistics of the offloading traffic or the radio channels, and satisfies the long-term performance constraints imposed by the users. Several numerical results illustrate the advantages of the proposed method.

eess.SP↗

arXiv2021

Energy Efficient Edge Computing: When Lyapunov Meets Distributed Reinforcement Learning

In this work, we study the problem of energy-efficient computation offloading enabled by edge computing. In the considered scenario, multiple users simultaneously compete for limited radio and edge computing resources to get offloaded tasks processed under a delay constraint, with the possibility of exploiting low power sleep modes at all network nodes. The radio resource allocation takes into account inter- and intra-cell interference, and the duty cycles of the radio and computing equipment have to be jointly optimized to minimize the overall energy consumption. To address this issue, we formulate the underlying problem as a dynamic long-term optimization. Then, based on Lyapunov stochastic optimization tools, we decouple the formulated problem into a CPU scheduling problem and a radio resource allocation problem to be solved in a per-slot basis. Whereas the first one can be optimally and efficiently solved using a fast iterative algorithm, the second one is solved using distributed multi-agent reinforcement learning due to its non-convexity and NP-hardness. The resulting framework achieves up to 96.5% performance of the optimal strategy based on exhaustive search, while drastically reducing complexity. The proposed solution also allows to increase the network's energy efficiency compared to a benchmark heuristic approach.

cs.LG↗

arXiv2019

Resilient Design of 5G Mobile-Edge Computing Over Intermittent mmWave Links

Two enablers of the 5th Generation (5G) of mobile communication systems are the high data rates achievable with millimeter-wave radio signals and the cloudification of the network's mobile edge, made possible also by Multi-access Edge Computing (MEC). In 5G networks, user devices may exploit the high capacity of their mobile connection and the computing capabilities of the edge cloud to offload computational tasks to MEC servers, which run applications on devices' behalf. This paper investigates new methods to perform power- and latency-constrained offloading. First, aiming to minimize user devices' transmit power, the opportunity to exploit concurrent communication links between the device and the edge cloud is studied. The optimal number of channels for simultaneous transmission is characterized in a deterministic and a probabilistic scenario. Subsequently, blocking events that obstruct millimeter-wave channels making them `intermittent' are considered. Resource overprovisioning and error-correcting codes against asymmetric block erasures are proposed to jointly contrast blocking and exploit multi-link communications' diversity. The asymmetric block-erasure channel is characterized by a study of its outage probability. The analysis is performed in a framework that yields closed-form expressions. These, together with corroborating numerical results, are intended to provide reference points and bounds to optimal performance in practical applications.

cs.IT↗

arXiv2018

The edge cloud: A holistic view of communication, computation and caching

The evolution of communication networks shows a clear shift of focus from just improving the communications aspects to enabling new important services, from Industry 4.0 to automated driving, virtual/augmented reality, Internet of Things (IoT), and so on. This trend is evident in the roadmap planned for the deployment of the fifth generation (5G) communication networks. This ambitious goal requires a paradigm shift towards a vision that looks at communication, computation and caching (3C) resources as three components of a single holistic system. The further step is to bring these 3C resources closer to the mobile user, at the edge of the network, to enable very low latency and high reliability services. The scope of this chapter is to show that signal processing techniques can play a key role in this new vision. In particular, we motivate the joint optimization of 3C resources. Then we show how graph-based representations can play a key role in building effective learning methods and devising innovative resource allocation techniques.

eess.SP↗