SearcharxivSearch

arXiv subjects

Mattias Beck

Publications and source records attributed to Mattias Beck.

At least 19 recordsLinked to original sources

Dynamically reconfigurable THz quantum walk comb laser through subharmonic excitation

On-chip frequency combs are increasingly relevant to both laser science and applications. Broad bandwidths and flat-top spectral envelopes are especially desirable for precision spectroscopy and dense wavelength-division multiplexed communications. Toward these goals, active microwave modulation has emerged as a powerful strategy for generating, stabilizing, and reconfiguring frequency combs at the source. However, practical challenges associated with high-frequency modulation imposes an upper bound on the accessible cavity free spectral ranges. Here, we demonstrate a subharmonic locking scheme in a quantum walk comb laser, a recently introduced platform for broadband and highly controllable comb states. Using a THz ring quantum cascade laser, we realize quantum walk comb formation under strong microwave injection at successive subharmonics of the cavity round-trip frequency, tuning the comb spacing from 15.8 to 1.58 GHz. The resulting states arise from fast-gain dynamics and nonlinear microwave mixing in the laser cavity. Through two-tone injection, we exploit this mixing to dynamically control the comb bandwidth and spectral shape. These results establish subharmonic excitation as a route to broadband, reconfigurable semiconductor comb generation in high-FSR cavities.

physics.optics

Ultrabroadband Gain-Switched and Superluminescent Terahertz Semiconductor Lasers

Terahertz quantum cascade lasers (THz QCLs) are chip-scale semiconductor lasers operating in the frequency range between 1-6 THz, useful as compact sources for spectroscopy, communications, and non-destructive imaging and testing. Here, we apply low-frequency microwave modulation on a planarized THz QCL to generate ultrabroadband emission in the THz range. For very low modulation frequencies below 1 GHz, a gain-switched octave-spanning spectrum with a smooth spectral envelope is generated between 1.9 - 4.1 THz. Increasing the modulation frequency broadens the lasing modes until a low-coherence, continuous emission spectrum is achieved in the superluminescent regime, covering the spectral region between around 3 - 4 THz, without any discrete lasing modes or spectral gaps. We complement the experimental results with extensive analytical models and numerical simulations that capture the intracavity laser dynamics and fully explain the different operation regimes. These devices could prove useful for absorption spectroscopy without any spectral gaps, and as ultrabroadband sources of THz radiation.

physics.optics

Profiling THz Beams With Off-Label Use of Infrared Microbolometric Cameras

Visualizing the spatial profile of light beams is essential for evaluating irradiance, characterizing beam quality, and achieving precise alignment. In the optical spectral range, this is readily performed using silicon-based CCD and CMOS cameras. In the terahertz (THz) range, however, it typically requires specialized detectors with prohibitive costs. Here, we show that an infrared (IR) camera can be used outside of its labeled specifications to achieve similar performance as a dedicated microbolometric THz camera, at under 1% of the THz camera's cost. We compared the cameras by characterizing THz beam profiles from two sources: a pulsed broadband THz beam produced through optical rectification in organic crystals, and a narrowband quasi-continuous-wave (quasi-CW) THz beam emitted by a quantum cascade laser. For the broadband THz radiation, the beam width measured by the two cameras differed by only ~ 6%, well within the pixel resolution limit, and in the narrowband quasi-CW case by just ~ 1.3%. Additionally, the IR camera exhibits a lower minimum detectable power (down to 1.5 THz) than the THz camera, while also maintaining a linear and polarization-independent responsivity. These results expand the applicability of conventional IR cameras to the THz range, suggesting that they will become routine tools for high-fidelity THz beam diagnostics and imaging in scientific and industrial applications.

physics.optics

Short period InGaAs/AlInAs THz quantum cascade laser in thin double metal cavities operating up to 188K

We present a two-well terahertz (THz) quantum cascade laser designed for high temperature operation based on the InGaAs/AlInAs material system. The lighter effective mass and higher energy barriers increase the gain at high temperatures (T > 150K). When processed in copper-based double metal waveguides the devices show laser action up to a maximum operating temperature of 188K with a maximum current density of 1.4kA/cm$^2$. The low Joule heating due to reduced active region thickness and low electrical bias allows operation at 10% duty cycle up to a temperature of 170K.

physics.optics

Infrared photonics for healthcare: A roadmap for proactive and predictive health management

The field of infrared (IR) photonics is currently undergoing remarkable progress, moving rapidly towards practical sensing applications demanded by medical therapy and diagnostics (theranostics). The Developments can be divided into three main categories: (i) novel devices and measurement concepts including advanced updates of classical approaches that push medical sensing into the spotlight; (ii) new demonstrations of photonic integrated circuit (PIC-)based IR devices enabling highly miniaturized sensors for point-of-care application as well as medical and wellness wearables; and (iii) technologically-mature IR demonstrators that enable first medical sensing and treatment applications. This roadmap paper provides a consolidated overview of this highly dynamic and interdisciplinary research field with a focus on the major roadblocks that limit the widespread adoption of IR photonics in large-scale medical diagnostics. Special attention is given to the ambivalence between the molecular-level spectroscopic interpretation and a broader health-state assessment, highlighting the need for a common framework. Additionally, the paper discusses the critical importance of unified measurement standards, calibration protocols, and medical certification processes to ensure the validity of experimental results, reproducibility, and clinical trust, particularly when novel experimental techniques and AI algorithms are involved. Perspectives from major past and current contributors to application-oriented IR photonics will be provided.

physics.app-ph

Short mode-locked pulses from planarized Y-coupled THz lasers

Short THz pulses are highly attractive both for fundamental research and practical applications in this underdeveloped region of the electromagnetic spectrum. Typically, THz pulses are generated using nonlinear optical methods, starting from a high-power visible or near-IR mode-locked source, but usually suffer from low conversion efficiencies. Here, we present a direct on-chip THz source of coherent short pulse trains based on active mode-locking of an inverse-designed planarized Y-coupled THz quantum cascade laser. By employing quasi-resonant microwave modulation of the asymmetric laser cavity, mode-locked pulses as short as 2.3 ps are generated, with emission bandwidths spanning 500 and 700 GHz at a central frequency of 2.9 THz.

physics.optics

Epitaxial growth optimization, measurement and theoretical analysis of strain-compensated QCL grown on (511)A InP

Interface roughness scattering is an important limiting factor for achieving high performance Quantum Cascade Lasers. Following recent results, we study the growth conditions for a strain-compensated QCL emitting around 4.6 {\mu}m grown on a (511)A InP substrate using AFM and XRD measurements. We find that modulating the arsenic flux and correctly tailoring the III/V ratio is fundamental to achieve a good quality material. We report the first lasing device on such a platform with a current density threshold of 1.34 kA/cm2 and a slope efficiency of 1.1 W/A, which result suboptimal compared to the (100) reference. Finally, we find a 7% redshift of the (511)A spectrum which we attribute to an impurity scattering due to the increased incorporation along the exposed (111) direction. We validate this statement by verifying that the change in CBO and effective electron mass due to strain along a non-trivial direction cannot cause such a shift by using the k-p method generalized to arbitrary growth directions

physics.app-ph

Free-Running Ring Quantum Cascade Laser with 50 kHz Linewidth

We report on the noise characterization of a free-running ring quantum cascade laser resonator emitting a single frequency mode around 7.7 $\mu$m. Using a gas cell filled with N$_2$O as a frequency-to-voltage discriminator, we measured the frequency noise power spectral density of the laser from which we extracted its linewidth. The results show a full width at half maximum close to 50 kHz at 1 s integration time, which represents at least a sixfold improvement compared to state-of-the-art quantum cascade lasers operating in a spectral region above 7 $\mu$m. We also demonstrate that such lasers can be efficiently used for frequency modulation spectroscopy, which opens up new possibilities for high resolution metrology and spectroscopic applications in the mid-infrared.

physics.optics

Gate-tunable single terahertz meta-atom ultrastrong light-matter coupling

We study the electrical tunability of ultrastrong light-matter interactions between a single terahertz circuit-based complementary split ring resonator (cSRR) and a two-dimensional electron gas. For this purpose, transmission spectroscopy measurements are performed under the influence of a strong magnetic field at different set points for the electric gate bias. The resulting Landau polariton dispersion depends on the applied electric bias, as the gating technique confines the electrons in-plane down to extremely sub-wavelength dimensions as small as d = 410 nm. This confinement allows for the excitation of standing plasma waves at zero magnetic field and an effective tunability of the electron number coupled to the THz resonator. This allows the normalized coupling strength to be tuned in-situ from $\eta$ = 0.46 down to $\eta$ = 0.18. This is the first demonstration of terahertz far-field spectroscopy of an electrically tunable interaction between a single terahertz resonator and electrons in a GaAs quantum well heterostructure.

cond-mat.mes-hall

Fast and compact time-resolved spectroscopy enabled by Quantum Walk Combs

Optical frequency combs paved the way for fast and compact multi-component optical chemical analysis due to their broadband spectra. Dual-comb spectrometers embody this technology, but their design requires a pair of matched combs, adding complexity to the system. In this study, we propose and implement a scheme for a rapid, compact spectroscopic analyser that operates without moving components, leveraging the tunability and speed of a single quantum walk comb laser. Previously, these combs have been shown to deliver stable, tunable and broadband lasing. Here, a single quantum cascade laser-based comb emitting within the significant molecular fingerprint region of the mid-infrared spectrum was employed in a non-interferometric setup for targeted and non-targeted analysis of various organic solvent vapours. With a time resolution as small as 10 microseconds and a high dynamic range reaching three orders of magnitude in concentration, this approach is suitable for the real-time analysis of chemical kinetics.

physics.optics

Multi-mode Deep Strong Coupling in a Multi Quantum Well Fabry-Perot Cavity

We present multi-mode deep-strong coupling in a multi-quantum well (N=166) heterostructure. The heterostructure itself acts as a Fabry-Perot cavity, for which the even cavity modes strongly couple to the cyclotron resonance to form Landau polaritons. The experimentally observed vacuum Rabi splitting is larger than the mode spacing and well into the deep-strong coupling regime ($\eta>1$) resulting in a rich multi-mode polaritonic spectrum which is accurately reproduced by an all-to-all multi-photonic, multi-electronic Hopfield coupling model. Remarkably, light-matter decoupling is observed across the whole measurable spectrum, including in the low frequency limit ($\lambda>>L_{cav}$) where the normalized coupling strength reaches $\eta=8.1$. The system demonstrates a robust platform for exploring extreme coupling regimes and its chiral nature holds potential for chiral cavity and chiral mirror applications.

physics.optics

Time-resolved spectroscopy of noise-driven collective states of light

We study a collective liquid state of light in a fast-gain laser. Controlled temporal noise on the cavity modulation creates a fluctuating linear potential along the synthetic frequency lattice of the cavity modes. We identify three regimes of lattice occupation as noise increases: an extended distribution, a Gaussian envelope, and exponential localization. Time-resolved spectroscopy on single realizations of noise reveals distinct dynamics in the latter two: transport persists in the Gaussian regime, modulated by the fluctuating potential, but is fully suppressed at all times in the localized regime. Averaging over many noise realizations shows that noise reduces the transport speed and confirms ergodicity of the system.

physics.optics

Integrated thin film lithium niobate mid-infrared modulator

The mid-infrared spectral range holds great promise for applications such as molecular spectroscopy and telecommunications. Many key molecules exhibit strong absorption features in this range, and free-space optical communication benefits from reduced atmospheric attenuation and low transmission losses in specific wavelength bands spanning from 3 to 14 $\mu m$. Recent progress in MIR photonics has been fuelled by the rapid development of efficient light sources and detectors. However, further advancement is hindered by the lack of low-loss, high-performance integrated photonic platforms and modulators. Lithium niobate on sapphire is a promising candidate, operating across a broad spectral range from 0.4 $\mu m$ to 4.5 $\mu m$. We demonstrate a broadband, high-speed lithium niobate on sapphire Mach-Zehnder electro-optic modulator operating from 3.95 to 4.3 $\mu m$. The device achieves a 3 dB bandwidth exceeding 20 GHz, an extinction ratio of 34 dB, and a half-wave voltage of 22 V$\cdot$cm, delivering optical output power at the half-milliwatt level. These properties are leveraged to demonstrate data transmission at 10 Gbit/s. The modulator is also used to generate a frequency comb with a width of 80 GHz. Furthermore, we demonstrate full $\pi$-phase modulation in the MIR, representing a key milestone for integrated MIR photonics. These results establish a pathway toward high-speed, energy-efficient MIR photonic systems for applications in telecommunications, sensing, and quantum technologies.

physics.optics

Quantum Walk Comb in a Dual Waveguide Quantum Cascade Laser

Ring quantum cascade lasers (QCLs) proved to be a versatile tool for generating tunable and stable frequency combs in the mid infrared range in the form of quantum walk combs. By homogeneously integrating a racetrack QCL with a passive waveguide, which lays on top of the active region plane and therefore can be designed to be fully independent from the laser geometry, we improve the light outcoupling from the ring by more than 2 orders of magnitude reaching a maximum output power of 120 mW. In addition, we show that it is possible to achieve quantum walk comb operation in the devices under analysis. Finally, we prove that we can change the light dispersion by tuning the parameters of the passive waveguide, with a direct impact on the behavior of the generated comb.

quant-ph

Ultrafast Non-Hermitian Skin Effect

Topological phases of matter commonly feature protected states at their boundaries. Transferring this protection to time-metamaterials is extremely challenging, as it requires the generation of an abrupt interface between two topologically distinct bulks. Here, we realize and measure an ultrafast topological non-Hermitian skin mode bound to an interface circulating within the cavity of a fast-gain semiconductor laser. The nonlinear stationary state generated in such devices features a jump in the instantaneous frequency. We show that this discontinuity gives rise to a topological interface for the field fluctuations in the system. Using direct intensity sampling, we experimentally measure the skin modes and their positioning at the frequency jump of the stationary state. Analysis of these isolated modes reveals an ultrashort full-width at half-maximum of 583 $\pm$ 16 fs. Furthermore, we show that we can tune the shape and relative timing shift of the skin modes via external bias modulation. Finally, both numerical and experimental analysis of the noise in the system reveal that field fluctuations are funneled into the topological interface. Our findings reveal a new way to generate topologically protected states of light in time, which paves the way for novel time-varying physics as well as metrological applications.

physics.optics

Spectral shaping of fast-gain frequency combs through phases in synthetic dimensions

Optical frequency comb devices have unlocked new capabilities in telecommunications, sensing, and metrology. Yet, precise in situ control of the comb spectral envelope remains extremely challenging. By introducing mode coupling with non-trivial phases, we demonstrate a spectral shaping technique that enables continuous tuning of a dominant spectral lobe across the full bandwidth of a semiconductor laser frequency comb. We achieve this jointly leveraging the engineered geometry of the synthetic lattice formed by the cavity modes of the laser and the coherent dynamics enabled by its fast-gain recovery. We use dual-tone modulation of the cavity at its repetition rate and twice this frequency with a controlled relative phase to couple the comb modes into a triangular lattice. The relative phase between the two tones defines a lattice phase that breaks time-reversal symmetry and steers the lattice dynamics through the fast gain. With this approach, we experimentally control the spectral envelope of the comb such that a targeted region contains more than twice the intensity expected from a uniform distribution, demonstrating tunable spectral selectivity. This capability, achieved directly at the light generation stage in a fast-gain device, opens routes for efficient programmable waveform engineering with potential applications in ranging, data transmission, and sensing.

physics.optics

On-chip, inverse-designed active wavelength division multiplexer at THz frequencies

The development of photonic integrated components for terahertz has become an active and growing research field. Despite its numerous applications, several challenges are still present in hardware design. We demonstrate an on-chip active wavelength division multiplexer (WDM) operating at THz frequencies. The WDM architecture is based on an inverse design topology optimization, which is applied in this case to the active quantum cascade heterostructure material embedded within a polymer in a planarized double metal cavity. Such an approach enables the fabrication of a strongly subwavelength device, with a normalized volume of only $V/\lambda^3 \simeq 0.5$. The WDM input is integrated with a THz quantum cascade laser frequency comb, providing three broadband output ports, ranging from 2.2 THz to 3.2 THz, with $\approx$ 330 GHz bandwidth and a maximum crosstalk of -6 dB. The three ports are outcoupled via integrated broadband patch array antennas with surface emission. Such a device can be also function as a stand-alone element, unlocking complex on-chip signal processing in the THz range

physics.optics

Non-resonant Optical Injection Locking in Quantum Cascade Laser Frequency Combs

Optical injection locking of the repetition frequency of a quantum cascade laser frequency comb is demonstrated using an intensity modulated near-infrared light at 1.55 $\mu$m illuminating the front facet of the laser. Compared to the traditional electrical modulation approach, the introduced technique presents benefits from several perspectives such as the availability of mature and high bandwidth equipment in the near-infrared, circumvent the need of dedicated electronic components for the quantum cascade laser, and allows a direct link between the near and mid-infrared for amplitude to frequency modulation. We show that this stabilization scheme, used with moderate near-infrared power of a few milliwatts, allows for a strong reduction of the frequency noise. We also perform a full characterization of the mechanism and evidence that the locking range follows Adler's law. A comparison of our results with those in recent literature indicates that the optical approach leads to better performance compared to the traditional method, which we expect to benefit mid-infrared spectroscopy and metrological applications.

physics.optics