Searcharxiv⌕ Search

arXiv subjects

Maurice Fallon

Publications and source records attributed to Maurice Fallon.

At least 19 recordsLinked to original sources

SG-ODOM: Event-Driven Proprioceptive State Estimation with Stability-Gated Contact Updates for Legged Robots

Reliable proprioceptive state estimation for legged robots fuses inertial sensing with kinematic sensing from leg encoders. The latter assumes a foot is stationary during the stance phase; however, physical foot touchdown does not necessarily provide a stationary reference for odometry, particularly during impact and load transfer. Repeatedly applying kinematic corrections throughout the same contact phase can introduce redundant or unreliable information. We present SG-ODOM, a proprioceptive odometry framework that uses stability-gated contact selection to schedule kinematic updates. Following physical touchdown, a stability gate accepts the contact for state estimation only after the foot reaches a sufficiently stable support condition. The resulting validated touchdown event triggers an estimator correction, while additional timeout updates bound the maximum duration of uninterrupted IMU propagation. The framework is evaluated on multiple legged platforms, both quadrupedal and humanoid robots, against representative state-of-the-art proprioceptive estimators. Across the evaluated sequences, SG-ODOM demonstrates competitive or superior estimation accuracy, reducing Relative Pose Error (RPE) by up to 25% compared to the baseline estimator on outdoor sequences from the GrandTour dataset. Source code: https://github.com/ori-drs/SG-ODOM. Video: https://youtu.be/-583_RyuhqQ

cs.RO↗

DRS-VPT: Directly Relocalizing in a Scan with Vision Point Transformers

We present DRS-VPT, a feed-forward transformer architecture for foundational image-to-scan registration. Given query images and a reference 3D point cloud, the model predicts the scan pose and point map alongside the poses and point maps of each camera, all expressed in the first camera's frame. It additionally predicts a coarse-to- fine pyramid of per-point and per-pixel features for direct reprojective alignment of the scan to the first image. This formulation unifies downstream tasks such as camera-LiDAR calibration in autonomous driving and indoor camera-to-map relocalization. A single DRS-VPT model achieves state-of-the-art performance for image-to-LiDAR registration in autonomous driving, competitive indoor relocalization without training map-specific weights, and strong zero-shot transfer to unseen environments. We also show qualitatively that the model learns complex scan-to-image projection properties such as occlusion of back-facing points. Code and models are available at https://github.com/ori-drs/drs-vpt.

cs.CV↗

Hilti-Trimble-Oxford Dataset: 360 Visual-Inertial Benchmark with Floor Plan Priors for SLAM and Localization

Automated progress monitoring on construction sites is an active area of research and development. Robot and human-carried mapping systems have been developed to build 3D maps of building and infrastructure projects. While LiDAR-based mapping systems achieve high accuracy, the cost of LiDAR can be prohibitive. Consumer-grade cameras with wide field of view ("360 cameras") combined with embedded inertial measurement units (IMUs) provide a cost-effective alternative. To support change detection and progress monitoring, highly accurate visual simultaneous localization and mapping (SLAM) and floor plan localization systems are required. In this paper, we present a high-quality dataset collected at an active construction site, which captures realistic challenges such as variable lighting conditions, moving workers, fast motions, and repetitive structures. The dataset offers thirty visual-inertial sequences recorded across ten floors over an eight-month period of the construction project. Ground truth trajectories are collected using a high quality LiDAR-inertial SLAM system rigidly attached to the 360 camera. Additionally, we report the results of an open research challenge evaluating the best visual SLAM and localization systems from around the world. The Challenge attracted substantially higher participation in SLAM, with 62 teams compared to 22 in floor plan localization, which suggests that this task receives less attention from researchers and motivates further exploration through proposed dataset and challenge, available at: https://hilti-trimble-challenge.com/dataset-2026.

cs.RO↗

FoundationVIO: Enforcing Metric Scale in Feed-forward Visual-Inertial Odometry

Feed-forward geometric foundation models (GFMs) directly predict dense geometry and camera poses from batches of images. Emerging visual SLAM methods chain together consecutive GFM batches to form dense point cloud maps. A core challenge is how to address the ambiguous geometric scale of GFM predictions: independent predictions are locally consistent up-to-scale but not constrained by any direct physical measurements. Models trained on data with known scale improve the consistency of GFM reconstructions but again do not directly measure it. Consequently, trajectories and 3D reconstructions from GFM-enabled SLAM methods inherit this issue. Motivated by parallels with classical visual-inertial odometry, we introduce FoundationVIO which integrates inertial sensing with GFM predictions to recover metric scale reconstruction using a factor-graph based approach. We demonstrate odometry estimates competitive with classical state-of-the-art VIO methods and accurate dense reconstructions that outperform GFM-enabled SLAM methods. We also add a minimal GFM-based loop-closure mechanism to create a full Visual-Inertial SLAM system capable of creating globally accurate reconstructions and pose estimates. We evaluate our method on three datasets with well known sensor systems and demonstrate its compatibility on ubiquitous camera and IMU sensors. The method runs at approximately real-time on a consumer-grade laptop GPU. Code: https://github.com/ori-drs/FoundationVIO.

cs.RO↗

Quadruped Obstacle Avoidance and Footstep Planning with Distributed Low-cost Time-of-Flight Sensors

Quadruped robots typically rely on depth cameras and LiDAR sensors to map their local environment. However, these sensors have limited close-range coverage, are relatively expensive, and consume significant power. This study investigates whether distributed Time-of-Flight (ToF) sensors can serve as a low-cost alternative to depth cameras for near-field terrain mapping for locomotion and local navigation. We designed a distributed ToF sensing architecture for the ANYbotics ANYmal quadruped, assessed its environment reconstruction accuracy, and benchmarked it against depth cameras for terrain mapping and obstacle avoidance. Distributing these sensors around the robot can also avoid the blind spots of traditional sensors. Our results show that, despite their low resolution and higher measurement noise, distributed ToF sensors can support reliable perceptual locomotion with centimeter-level local mapping accuracy. The proposed sensing strategy provides sufficient geometric information for near-field obstacle avoidance and footstep planning, at substantially lower cost, energy consumption, and system complexity than depth cameras.

cs.RO↗

ScaRF-SLAM: Scale-Consistent Reconstruction with Feed-Forward Models and Classical Visual SLAM

Recent works have explored unifying SLAM with geometric foundation models (GFMs). However, directly using GFM predictions for tracking is highly sensitive to model capability and uncertainty, as geometric inaccuracies in the predictions can adversely affect pose estimation. To address this limitation, we propose a decoupled framework that integrates classical feature-based SLAM with GFMs, which achieves higher quality and more consistent dense reconstruction. In brief, we use classical visual SLAM for robust low-latency tracking and use GFMs exclusively for mapping. By anchoring mapping to poses produced by the SLAM module and optimizing across depth scales, the proposed design avoids propagating inaccuracies from GFM predictions into pose estimation while imposing geometric constraints on the reconstruction. The system builds submaps from multiple posed keyframes and enforces scale consistency via lightweight frame and submap scale optimization. It also performs projection-based point cloud fusion within each submap, and updates submaps online to reflect trajectory updates from the feature-based SLAM. To evaluate tracking and reconstruction of our method, we introduce a loop-rich, building-scale indoor dataset with accurate sensor trajectories and LiDAR ground-truth. Experiments show that our approach achieves superior trajectory accuracy while improving reconstruction precision by 10%-20% over existing methods, with about 2 cm reconstruction error per 10 m chunk on building-scale dataset. On large-scale outdoor datasets, it attains 10 cm error per 30 m chunk (w.r.t LiDAR ground-truth models). Code and dataset: https://github.com/ori-drs/ScaRF-SLAM

cs.RO↗

OASIS-Map: Object-Level Change Detection in Multi-Session Mapping using Semantic Correspondence Matching

Map representations which are consistent across repeated visits to a real-world semi-static environment are very useful for long-term robotic inspection. In such settings, the scene may evolve while the robot is absent, with objects appearing, disappearing, moving, or being replaced, quickly making a static map outdated. Existing change-detection methods reason through geometry, category-level semantics, or object persistence. However, achieving reliable object association across revisits remains a key challenge, especially under partial views, occlusion, and imperfect segmentation. In this work, we propose OASIS-Map, a multi-session mapping system that maintains a spatio-temporally consistent object-level map by establishing dense patch-level semantic correspondences between temporal observations. These correspondences detect where the scene has changed and incrementally associate objects across revisits as the robot re-observes the environment. We demonstrate OASIS-Map on three challenging real-world scenarios: object rearrangements in 3RScan, visually similar car replacements in a car park, and large-scale scene changes in an outdoor market. We achieve 0.783 F1 on change detection in a car replacement scenario in a car park and 0.667 F1 on moved object association in 3RScan. https://dynamic.robots.ox.ac.uk/projects/oasis-map/

cs.RO↗

GrandTour: A Legged Robotics Dataset in the Wild for Multi-Modal Perception and State Estimation

Accurate state estimation and multi-modal perception are prerequisites for autonomous legged robots in complex, large-scale environments. To date, no large-scale public legged-robot dataset captures the real-world conditions needed to develop and benchmark algorithms for legged-robot state estimation, perception, and navigation. To address this, we introduce the GrandTour dataset, a multi-modal legged-robotics dataset collected across challenging outdoor and indoor environments, featuring an ANYbotics ANYmal-D quadruped equipped with the Boxi multi-modal sensor payload. GrandTour spans a broad range of environments and operational scenarios across distinct test sites, ranging from alpine scenery and forests to demolished buildings and urban areas, and covers a wide variation in scale, complexity, illumination, and weather conditions. The dataset provides time-synchronized sensor data from spinning LiDARs, multiple RGB cameras with complementary characteristics, proprioceptive sensors, and stereo depth cameras. Moreover, it includes high-precision ground-truth trajectories from satellite-based RTK-GNSS and a Leica Geosystems total station. This dataset supports research in SLAM, high-precision state estimation, and multi-modal learning, enabling rigorous evaluation and development of new approaches to sensor fusion in legged robotic systems. With its extensive scope, GrandTour represents the largest open-access legged-robotics dataset to date. The dataset is available at https://grand-tour.leggedrobotics.com on HuggingFace (ROS-independent), and in ROS formats, along with tools and demo resources.

cs.RO↗

TreeLoc++: Robust 6-DoF LiDAR Localization in Forests with a Compact Digital Forest Inventory

Reliable localization is essential for sustainable forest management, as it allows robots to revisit and monitor the status of individual trees over long periods. In modern forestry, this management is structured around Digital Forest Inventories (DFIs), which encode stems using compact geometric attributes rather than raw data. Despite their central role, DFIs have been overlooked in localization research, and most methods still rely on dense gigabyte-sized point clouds that are costly to store and maintain. To improve upon this, we propose TreeLoc++, a global localization framework that operates directly on DFIs as a discriminative representation, eliminating the need to use the raw point clouds. TreeLoc++ reduces false matches in structurally ambiguous forests and improves the reliability of full 6-DoF pose estimation. It augments coarse retrieval with a pairwise distance histogram that encodes local tree-layout context, subsequently refining candidates via DBH-based filtering and yaw-consistent inlier selection to further reduce mismatches. Furthermore, a constrained optimization leveraging tree geometry jointly estimates roll, pitch, and height, enhancing pose stability and enabling accurate localization without reliance on dense 3D point cloud data. Evaluations on diverse forests across four countries show that TreeLoc++ achieves precise localization with centimeter-level accuracy. We further demonstrate robustness to long-term change by localizing data recorded in 2025 against inventories built from 2023 data, spanning a two-year interval. The system represents 15 sessions spanning 7.98 km of trajectories using only 250KB of map data and outperforms both hand-crafted and learning-based baselines that rely on point cloud maps. This demonstrates the scalability of TreeLoc++ for long-term deployment. TreeLoc++ is open-sourced at \bl{https://github.com/minwoo0611/TreeLoc-plusplus}.

cs.RO↗

LAPS: Improving Incremental LiDAR Mapping using Active Pooling and Sampling for Neural Distance Fields

Neural distance fields offer a compact and continuous representation of 3D geometry, making them attractive for incremental LiDAR mapping. However, their online optimization is vulnerable to catastrophic forgetting, where new observations can degrade previously reconstructed geometry. Replay-based training is commonly used to address this issue, but existing methods typically rely on passive replay buffers and uniform sampling, which can waste memory on redundant observations and under-train poorly constrained regions. We propose LAPS, a replay management framework for incremental neural mapping that improves both replay retention and replay allocation during online updates. LAPS combines reliability-based active pooling to retain reliable historical samples under limited memory with uncertainty-guided active sampling to focus optimization on under-constrained regions. Experiments on synthetic and real-world benchmarks show that LAPS consistently improves reconstruction completeness while maintaining competitive geometric accuracy. On Oxford Spires, it improves recall by 4.66 pp and F1-score by 3.79 pp over PIN-SLAM on the Blenheim Palace 05 sequence. We release our open source implementation at: https://github.com/dongjae0107/LAPS.

cs.RO↗

LEXI-SG: Monocular 3D Scene Graph Mapping with Room-Guided Feed-Forward Reconstruction

Scene graphs are becoming a standard representation for robot navigation, providing hierarchical geometric and semantic scene understanding. However, most scene graph mapping methods rely on depth cameras or LiDAR sensors. In this work, we present LEXI-SG, the first dense monocular visual mapping system for open-vocabulary 3D scene graphs using only RGB camera input. Our approach exploits the semantic priors of open-vocabulary foundation models to partition the scene into rooms, deferring feed-forward reconstruction to when each room is fully observed -- enabling scalable dense mapping without sliding-window scale inconsistencies. We propose a room-based factor graph formulation to globally align room reconstructions while preserving local map consistency and naturally imposing the semantic scene graph hierarchy. Within each room, we further support open-vocabulary object segmentation and tracking. We validate LEXI-SG on indoor scenes from the Habitat-Matterport 3D and self-collected egocentric office sequences. We evaluate its performance against existing feed-forward SLAM methods, as well as established scene graphs baselines. We demonstrate improved trajectory estimation and dense reconstruction, as well as, competitive performance in open-vocabulary segmentation. LEXI-SG shows that accurate, scalable, open-vocabulary 3D scene graphs can be achieved from monocular RGB alone. Our project page and office sequences are available here: https://ori-drs.github.io/lexisg-web/.

cs.RO↗

DigiForest: Digital Analytics and Robotics for Sustainable Forestry

Covering one third of Earth's land surface, forests are vital to global biodiversity, climate regulation, and human well-being. In Europe, forests and woodlands reach approximately 40% of land area, and the forestry sector is central to achieving the EU's climate neutrality and biodiversity goals; these emphasize sustainable forest management, increased use of long-lived wood products, and resilient forest ecosystems. To meet these goals and properly address their inherent challenges, current practices require further innovation. This chapter introduces DigiForest, a novel, large-scale precision forestry approach leveraging digital technologies and autonomous robotics. DigiForest is structured around four main components: (1) autonomous, heterogeneous mobile robots (aerial, legged, and marsupial) for tree-level data collection; (2) automated extraction of tree traits to build forest inventories; (3) a Decision Support System (DSS) for forecasting forest growth and supporting decision-making; and (4) low-impact selective logging using purpose-built autonomous harvesters. These technologies have been extensively validated in real-world conditions in several locations, including forests in Finland, the UK, and Switzerland.

cs.RO↗

Sapling-NeRF: Geo-Localised Sapling Reconstruction in Forests for Ecological Monitoring

Saplings are key indicators of forest regeneration and overall forest health. However, their fine-scale architectural traits are difficult to capture with existing 3D sensing methods, which make quantitative evaluation difficult. Terrestrial Laser Scanners (TLS), Mobile Laser Scanners (MLS), or traditional photogrammetry approaches poorly reconstruct thin branches, dense foliage, and lack the scale consistency needed for long-term monitoring. Implicit 3D reconstruction methods such as Neural Radiance Fields (NeRF) and 3D Gaussian Splatting (3DGS) are promising alternatives, but cannot recover the true scale of a scene and lack any means to be accurately geo-localised. In this paper, we present a pipeline which fuses NeRF, LiDAR SLAM, and GNSS to enable repeatable, geo-localised ecological monitoring of saplings. Our system proposes a three-level representation: (i) coarse Earth-frame localisation using GNSS, (ii) LiDAR-based SLAM for centimetre-accurate localisation and reconstruction, and (iii) NeRF-derived object-centric dense reconstruction of individual saplings. This approach enables repeatable quantitative evaluation and long-term monitoring of sapling traits. Our experiments in forest plots in Wytham Woods (Oxford, UK) and Evo (Finland) show that stem height, branching patterns, and leaf-to-wood ratios can be captured with increased accuracy as compared to TLS. We demonstrate that accurate stem skeletons and leaf distributions can be measured for saplings with heights between 0.5m and 2m in situ, giving ecologists access to richer structural and quantitative data for analysing forest dynamics.

cs.RO↗

TreeLoc: 6-DoF LiDAR Global Localization in Forests via Inter-Tree Geometric Matching

Reliable localization is crucial for navigation in forests, where GPS is often degraded and LiDAR measurements are repetitive, occluded, and structurally complex. These conditions weaken the assumptions of traditional urban-centric localization methods, which assume that consistent features arise from unique structural patterns, necessitating forest-centric solutions to achieve robustness in these environments. To address these challenges, we propose TreeLoc, a LiDAR-based global localization framework for forests that handles place recognition and 6-DoF pose estimation. We represent scenes using tree stems and their Diameter at Breast Height (DBH), which are aligned to a common reference frame via their axes and summarized using the tree distribution histogram (TDH) for coarse matching, followed by fine matching with a 2D triangle descriptor. Finally, pose estimation is achieved through a two-step geometric verification. On diverse forest benchmarks, TreeLoc outperforms baselines, achieving precise localization. Ablation studies validate the contribution of each component. We also propose applications for long-term forest management using descriptors from a compact global tree database. TreeLoc is open-sourced for the robotics community at https://github.com/minwoo0611/TreeLoc.

cs.RO↗

LT-Exosense: A Vision-centric Multi-session Mapping System for Lifelong Safe Navigation of Exoskeletons

Self-balancing exoskeletons offer a promising mobility solution for individuals with lower-limb disabilities. For reliable long-term operation, these exoskeletons require a perception system that is effective in changing environments. In this work, we introduce LT-Exosense, a vision-centric, multi-session mapping system designed to support long-term (semi)-autonomous navigation for exoskeleton users. LT-Exosense extends single-session mapping capabilities by incrementally fusing spatial knowledge across multiple sessions, detecting environmental changes, and updating a persistent global map. This representation enables intelligent path planning, which can adapt to newly observed obstacles and can recover previous routes when obstructions are removed. We validate LT-Exosense through several real-world experiments, demonstrating a scalable multi-session map that achieves an average point-to-point error below 5 cm when compared to ground-truth laser scans. We also illustrate the potential application of adaptive path planning in dynamically changing indoor environments.

cs.RO↗

PlanarMesh: Building Compact 3D Meshes from LiDAR using Incremental Adaptive Resolution Reconstruction

Building an online 3D LiDAR mapping system that produces a detailed surface reconstruction while remaining computationally efficient is a challenging task. In this paper, we present PlanarMesh, a novel incremental, mesh-based LiDAR reconstruction system that adaptively adjusts mesh resolution to achieve compact, detailed reconstructions in real-time. It introduces a new representation, planar-mesh, which combines plane modeling and meshing to capture both large surfaces and detailed geometry. The planar-mesh can be incrementally updated considering both local surface curvature and free-space information from sensor measurements. We employ a multi-threaded architecture with a Bounding Volume Hierarchy (BVH) for efficient data storage and fast search operations, enabling real-time performance. Experimental results show that our method achieves reconstruction accuracy on par with, or exceeding, state-of-the-art techniques-including truncated signed distance functions, occupancy mapping, and voxel-based meshing-while producing smaller output file sizes (10 times smaller than raw input and more than 5 times smaller than mesh-based methods) and maintaining real-time performance (around 2 Hz for a 64-beam sensor).

cs.RO↗

OpenLex3D: A Tiered Evaluation Benchmark for Open-Vocabulary 3D Scene Representations

3D scene understanding has been transformed by open-vocabulary language models that enable interaction via natural language. However, at present the evaluation of these representations is limited to datasets with closed-set semantics that do not capture the richness of language. This work presents OpenLex3D, a dedicated benchmark for evaluating 3D open-vocabulary scene representations. OpenLex3D provides entirely new label annotations for scenes from Replica, ScanNet++, and HM3D, which capture real-world linguistic variability by introducing synonymical object categories and additional nuanced descriptions. Our label sets provide 13 times more labels per scene than the original datasets. By introducing an open-set 3D semantic segmentation task and an object retrieval task, we evaluate various existing 3D open-vocabulary methods on OpenLex3D, showcasing failure cases, and avenues for improvement. Our experiments provide insights on feature precision, segmentation, and downstream capabilities. The benchmark is publicly available at: https://openlex3d.github.io/.

cs.CV↗

SiLVR: Scalable Lidar-Visual Radiance Field Reconstruction with Uncertainty Quantification

We present a neural radiance field (NeRF) based large-scale reconstruction system that fuses lidar and vision data to generate high-quality reconstructions that are geometrically accurate and capture photorealistic texture. Our system adopts the state-of-the-art NeRF representation to incorporate lidar. Adding lidar data adds strong geometric constraints on the depth and surface normals, which is particularly useful when modelling uniform texture surfaces which contain ambiguous visual reconstruction cues. A key contribution of this work is a novel method to quantify the epistemic uncertainty of the lidar-visual NeRF reconstruction by estimating the spatial variance of each point location in the radiance field given the sensor observations from the cameras and lidar. This provides a principled approach to evaluate the contribution of each sensor modality to the final reconstruction. In this way, reconstructions that are uncertain (due to e.g. uniform visual texture, limited observation viewpoints, or little lidar coverage) can be identified and removed. Our system is integrated with a real-time lidar SLAM system which is used to bootstrap a Structure-from-Motion (SfM) reconstruction procedure. It also helps to properly constrain the overall metric scale which is essential for the lidar depth loss. The refined SLAM trajectory can then be divided into submaps using Spectral Clustering to group sets of co-visible images together. This submapping approach is more suitable for visual reconstruction than distance-based partitioning. Our uncertainty estimation is particularly effective when merging submaps as their boundaries often contain artefacts due to limited observations. We demonstrate the reconstruction system using a multi-camera, lidar sensor suite in experiments involving both robot-mounted and handheld scanning. Our test datasets cover a total area of more than 20,000 square metres.

cs.RO↗