arXiv subjects

Max J. Ruckriegel

Publications and source records attributed to Max J. Ruckriegel.

8 recordsLinked to original sources

arXiv2026

Low-Frequency Charge Noise in Bilayer Graphene Quantum Dots

Bilayer graphene (BLG) quantum dots (QDs) are a promising platform for semiconductor qubits. However, the low-frequency charge noise that may ultimately limit coherence has remained largely unexplored. Here, we systematically characterize charge noise in gate-defined BLG QDs using transport-based noise spectroscopy. We extract a median amplitude of $ S_μ^{1/2} (1~\text{Hz}) = 1.16~μ\text{eV}/\sqrt{\text{Hz}}$, placing BLG well within the range reported for established semiconductor quantum-dot platforms. Across variations in charge occupation, confinement, source-drain bias, and charge-sensor operating conditions, neither the noise amplitude nor the spectral dependence shows a reproducible trend in electrostatic tuning, indicating that we extracted the intrinsic semiconductor noise. Consistent noise levels are further observed in double QDs and confirmed using an independent superconducting resonator-based dispersive readout. Extending the study to BLG devices incorporating transition metal dichalcogenide layers reveals no measurable charge noise increase in weakly proximitized QDs. These results validate BLG as a viable platform for coherent quantum information processing.

cond-mat.mes-hall↗

arXiv2025

Time-resolved Charge Detection in Transition Metal Dichalcogenide Quantum Dots

We investigate electronic transport through gate-defined quantum dots in molybdenum disulfide MoS$_2$ using an integrated charge detector. We observe a crossover from two weakly coupled single dots to a strongly coupled double quantum dot. In the regime of extremely weak dot-lead coupling, where the direct transport current is below the detection limit, we measure the dot occupation via charge detection and access the few-electron regime. Due to the large band gap of MoS$_2$, tunneling rates can be sufficiently suppressed to resolve individual tunneling events. These results establish a platform for single-shot spin- and valley-to-charge conversion and highlight the potential of transition-metal dichalcogenide quantum dots for quantum information applications.

cond-mat.mes-hall↗

arXiv2025

Microwave spectroscopy of few-carrier states in bilayer graphene quantum dots

Bilayer graphene is a maturing material platform for gate-defined quantum dots that hosts long-lived spin and valley states. Implementing solid-state qubits in bilayer graphene requires a fundamental understanding of such confined electronic systems. In particular, states of two and three carriers, for which the exchange interaction between particles plays a crucial role, are a cornerstone for qubit readout and manipulation. Here we report on the spectroscopy of few-carrier states in bilayer graphene quantum dots, using circuit quantum electrodynamics (cQED) techniques that offer substantially improved energy resolution compared to standard transport techniques. Measurements using a superconducting high-impedance resonator capacitively coupled to the double quantum dot reveal dispersive features of two and three electron states, enabling the detection of Pauli spin and valley blockade and the characterization of the spin-orbit gap at zero magnetic field. The results deepen our understanding of few-carrier spin and valley states in bilayer graphene quantum dots and demonstrate that cQED techniques are a powerful state-selective probe for semiconductor nanostructures.

cond-mat.mes-hall↗

arXiv2025

Entropy of a double quantum dot

We use charge sensing to detect entropy changes in a double quantum dot defined by electrostatic gating of a GaAs/AlGaAs heterostructure. This system can be tuned to be two separate systems, like two independent, artificial atoms, or a single coherent system, like a molecule. We study entropy changes in both regimes due to changes in the occupation of the system. First we recover the single-dot result for each dot, that the occupation of the dot by a single electron corresponds to an increase in the entropy of $k_{\mathrm{B}} \log 2$. Next we examine two different charge transitions in the "molecular" regime, and how it reveals itself in terms of the measured entropy. We also uncover a realization of Pauli blockade that clutters the entropy signal. By applying a rate equation model, we demonstrate the effect's nonequilibrium origins and exclude it from the analysis of the system's entropy. Understanding these experiments in this simplest coupled system enables the study of the entropy in other, more complicated coupled quantum systems, such as ones with topological or highly entangled ground states.

cond-mat.mes-hall↗

arXiv2025

Spin-valley locked excited states spectroscopy in a one-particle bilayer graphene quantum dot

Current semiconductor qubits rely either on the spin or on the charge degree of freedom to encode quantum information. By contrast, in bilayer graphene the valley degree of freedom, stemming from the crystal lattice symmetry, is a robust quantum number that can therefore be harnessed for this purpose. The simplest implementation of a valley qubit would rely on two states with opposite valleys as in the case of a single-carrier bilayer graphene quantum dot immersed in a small perpendicular magnetic field ($B_\perp\lesssim 100$mT). However, the single-carrier quantum dot excited states spectrum has not been resolved to date in the relevant magnetic field range. Here, we fill this gap, by measuring the parallel and perpendicular magnetic field dependence of this spectrum with an unprecedented resolution of $4μ$eV. We use a time-resolved charge detection technique that gives us access to individual tunnel events. Our results come as a direct verification of the predicted spectrum and establish a new upper-bound on inter-valley mixing, equal to our energy resolution. Our charge detection technique opens the door to measuring the relaxation time of a valley qubit in a single-carrier bilayer graphene quantum dot.

cond-mat.mes-hall↗

arXiv2025

Spin-Valley Protected Kramers Pair in Bilayer Graphene

The intrinsic valley degree of freedom makes bilayer graphene (BLG) a unique platform for semiconductor qubits. The single-carrier quantum dot (QD) ground state exhibits a two-fold degeneracy, where the two states that constitute a Kramers pair, have opposite spin and valley quantum numbers. Because of the valley-dependent Berry curvature, an out-of-plane magnetic field breaks the time-reversal symmetry of this ground state and a qubit can be encoded in the spin-valley subspace. The Kramers states are protected against known spin- and valley-mixing mechanisms because mixing requires a simultaneous change of both quantum numbers. Here, we fabricate a tunable QD device in Bernal BLG and measure a spin-valley relaxation time for the Kramers states of ${38~\mathrm{s}}$, which is two orders of magnitude longer than the ${0.4~\mathrm{s}}$ measured for purely spin-blocked states. We also show that the intrinsic Kane-Mele spin-orbit splitting enables a Kramers doublet single-shot readout even at zero magnetic field with a fidelity above ${99\%}$. If these long-lived Kramers states also possess long coherence times and can be effectively manipulated, electrostatically defined QDs in BLG may serve as long-lived semiconductor qubits, extending beyond the spin qubit paradigm.

cond-mat.mes-hall↗

arXiv2024

Dipole coupling of a bilayer graphene quantum dot to a high-impedance microwave resonator

We implement circuit quantum electrodynamics (cQED) with quantum dots in bilayer graphene, a maturing material platform for semiconductor qubits that can host long-lived spin and valley states. The presented device combines a high-impedance ($Z_\mathrm{r} \approx 1 \mathrm{kΩ}$) superconducting microwave resonator with a double quantum dot electrostatically defined in a graphene-based van der Waals heterostructure. Electric dipole coupling between the subsystems allows the resonator to sense the electric susceptibility of the double quantum dot from which we reconstruct its charge stability diagram. We achieve sensitive and fast detection with a signal-to-noise ratio of 3.5 within 1 $μ\mathrm{s}$ integration time. The charge-photon interaction is quantified in the dispersive and resonant regimes by comparing the coupling-induced change in the resonator response to input-output theory, yielding a maximal coupling strength of $g/2π = 49.7 \mathrm{MHz}$. Our results introduce cQED as a probe for quantum dots in van der Waals materials and indicate a path toward coherent charge-photon coupling with bilayer graphene quantum dots.

cond-mat.mes-hall↗

arXiv2020

Dual-Wavelength Lasing in Quantum-Dot Plasmonic Lattice Lasers

Arrays of metallic particles patterned on a substrate have emerged as a promising design for on-chip plasmonic lasers. In past examples of such devices, the periodic particles provided feedback at a single resonance wavelength, and organic dye molecules were used as the gain material. Here, we introduce a flexible template-based fabrication method that allows a broader design space for Ag particle-array lasers. Instead of dye molecules, we integrate colloidal quantum dots (QDs), which offer better photostability and wavelength tunability. Our fabrication approach also allows us to easily adjust the refractive index of the substrate and the QD-film thickness. Exploiting these capabilities, we demonstrate not only single-wavelength lasing but dual-wavelength lasing via two distinct strategies. First, by using particle arrays with rectangular lattice symmetries, we obtain feedback from two orthogonal directions. The two output wavelengths from this laser can be selected individually using a linear polarizer. Second, by adjusting the QD-film thickness, we use higher-order transverse waveguide modes in the QD film to obtain dual-wavelength lasing at normal and off-normal angles from a symmetric square array. We thus show that our approach offers various design possibilities to tune the laser output.

physics.app-ph↗