arXiv subjects

Max M. Chumley

Publications and source records attributed to Max M. Chumley.

9 recordsLinked to original sources

arXiv2026

Pulsed Optical Injection Steering in Multistable Semiconductor Laser Arrays under Correlated Noise

We demonstrate robust programmable state preparation in small Vertical Cavity Surface Emitting Laser (VCSEL) arrays with optical feedback using transient optical injection in the form of Gaussian pulses. In Lang-Kobayashi-type models of delay-coupled two- and three-laser arrays, multistability gives rise to coexisting synchronized and symmetry-broken equilibrium branches. We show that short injection pulses applied to one or more lasers can steer the system from free-running operation to any stable equilibrium branch in the absence of noise by appropriate choice of pulse detuning and amplitude, after which the selected state persists without continued forcing. With correlated noise, injection steering remains effective, but branches with small basins of attraction are effectively destabilized by noise. These results validate pulsed injection as a practical mechanism for attractor selection in multistable VCSEL arrays and point to a feasible route toward experimental realization of programmable collective-state control.

physics.optics↗

arXiv2025

Dynamical System Parameter Path Optimization using Persistent Homology

Nonlinear dynamical systems are complex and typically only simple systems can be analytically studied. In applications, these systems are usually defined with a set of tunable parameters and as the parameters are varied the system response undergoes significant topological changes or bifurcations. In a high dimensional parameter space, it is difficult to determine which direction to vary the system parameters to achieve a desired system response or state. In this paper, we introduce a new approach for optimally navigating a dynamical system parameter space that is rooted in topological data analysis. Specifically we use the differentiability of persistence diagrams to define a topological language for intuitively promoting or deterring different topological features in the state space response of a dynamical system and use gradient descent to optimally move from one point in the parameter space to another. The end result is a path in this space that guides the system to a set of parameters that yield the desired topological features defined by the loss function. We show a number of examples by applying the methods to different dynamical systems and scenarios to demonstrate how to promote different features and how to choose the hyperparameters to achieve different outcomes.

math.DS↗

arXiv2025

Topological Approach for Data Assimilation

Many dynamical systems are difficult or impossible to model using high fidelity physics based models. Consequently, researchers are relying more on data driven models to make predictions and forecasts. Based on limited training data, machine learning models often deviate from the true system states over time and need to be continually updated as new measurements are taken using data assimilation. Classical data assimilation algorithms typically require knowledge of the measurement noise statistics which may be unknown. In this paper, we introduce a new data assimilation algorithm with a foundation in topological data analysis. By leveraging the differentiability of functions of persistence, gradient descent optimization is used to minimize topological differences between measurements and forecast predictions by tuning data driven model coefficients without using noise information from the measurements. We describe the method and focus on its capabilities performance using the chaotic Lorenz 63 system as an example and we also show that the method works on a higher dimensional example with the Lorenz 96 system.

nlin.CD↗

arXiv2025

Hall Effect Thruster Forecasting using a Topological Approach for Data Assimilation

Hall Effect Thrusters (HETs) are electric thrusters that eject heavy ionized gas particles from the spacecraft to generate thrust. Although traditionally they were used for station keeping, recently They have been used for interplanetary space missions due to their high delta-V potential and their operational longevity in contrast to other thrusters, e.g., chemical. However, the operation of HETs involves complex processes such as ionization of gases, strong magnetic fields, and complicated solar panel power supply interactions. Therefore, their operation is extremely difficult to model thus necessitating Data Assimilation (DA) approaches for estimating and predicting their operational states. Because HET's operating environment is often noisy with non-Gaussian sources, this significantly limits applicable DA tools. We describe a topological approach for data assimilation that bypasses these limitations that does not depend on the noise model, and utilize it to forecast spatiotemporal plume field states of HETs. Our approach is a generalization of the Topological Approach for Data Assimilation (TADA) method that allows including different forecast functions. We show how TADA can be combined with the Long Short-Term Memory network for accurate forecasting. We then apply our approach to high-fidelity Hall Effect Thruster (HET) simulation data from the Air Force Research Laboratory (AFRL) rocket propulsion division where we demonstrate the forecast resiliency of TADA on noise contaminated, high-dimensional data.

cs.LG↗

arXiv2024

Delay Parameter Selection in Permutation Entropy Using Topological Data Analysis

Permutation Entropy (PE) is a powerful tool for quantifying the complexity of a signal which includes measuring the regularity of a time series. Additionally, outside of entropy and information theory, permutations have recently been leveraged as a graph representation, which opens the door for graph theory tools and analysis. Despite the successful application of permutations in a variety of scientific domains, permutations requires a judicious choice of the delay parameter $τ$ and dimension $n$. However, $n$ is typically selected within an accepted range giving optimal results for the majority of systems. Therefore, in this work we focus on choosing the delay parameter, while giving some general guidance on the appropriate selection of $n$ based on a statistical analysis of the permutation distribution. Selecting $τ$ is often accomplished using trial and error guided by the expertise of domain scientists. However, in this paper, we show how persistent homology, a commonly used tool from Topological Data Analysis (TDA), provides methods for the automatic selection of $τ$. We evaluate the successful identification of a suitable $τ$ from our TDA-based approach by comparing our results to both expert suggested parameters from published literature and optimized parameters (if possible) for a wide variety of dynamical systems.

physics.data-an↗

arXiv2023

A Nonlinear Delay Model for Metabolic Oscillations in Yeast Cells

We introduce two time-delay models of metabolic oscillations in yeast cells. Our model tests a hypothesis that the oscillations occur as multiple pathways share a limited resource which we equate to the number of available ribosomes. We initially explore a single-protein model with a constraint equation governing the total resource available to the cell. The model is then extended to include three proteins that share a resource pool. Three approaches are considered at constant delay to numerically detect oscillations. First, we use a spectral element method to approximate the system as a discrete map and evaluate the stability of the linearized system about its equilibria by examining its eigenvalues. For the second method, we plot amplitudes of the simulation trajectories in 2D projections of the parameter space. We use a history function that is consistent with published experimental results to obtain metabolic oscillations. Finally, the spectral element method is used to convert the system to a boundary value problem whose solutions correspond to approximate periodic solutions of the system. Our results show that certain combinations of total resource available and the time delay, lead to oscillations. We observe that an oscillation region in the parameter space is between regions admitting steady states that correspond to zero and constant production. Similar behavior is found with the three-protein model where all proteins require the same production time. However, a shift in the protein production rates peaks occurs for low available resource suggesting that our model captures the shared resource pool dynamics.

math.DS↗

arXiv2023

Persistent Homology of Coarse Grained State Space Networks

This work is dedicated to the topological analysis of complex transitional networks for dynamic state detection. Transitional networks are formed from time series data and they leverage graph theory tools to reveal information about the underlying dynamic system. However, traditional tools can fail to summarize the complex topology present in such graphs. In this work, we leverage persistent homology from topological data analysis to study the structure of these networks. We contrast dynamic state detection from time series using a coarse-grained state-space network (CGSSN) and topological data analysis (TDA) to two state of the art approaches: ordinal partition networks (OPNs) combined with TDA and the standard application of persistent homology to the time-delay embedding of the signal. We show that the CGSSN captures rich information about the dynamic state of the underlying dynamical system as evidenced by a significant improvement in dynamic state detection and noise robustness in comparison to OPNs. We also show that because the computational time of CGSSN is not linearly dependent on the signal's length, it is more computationally efficient than applying TDA to the time-delay embedding of the time series.

stat.ML↗

arXiv2023

Pattern Characterization Using Topological Data Analysis: Application to Piezo Vibration Striking Treatment

Quantifying patterns in visual or tactile textures provides important information about the process or phenomena that generated these patterns. In manufacturing, these patterns can be intentionally introduced as a design feature, or they can be a byproduct of a specific process. Since surface texture has significant impact on the mechanical properties and the longevity of the workpiece, it is important to develop tools for quantifying surface patterns and, when applicable, comparing them to their nominal counterparts. While existing tools may be able to indicate the existence of a pattern, they typically do not provide more information about the pattern structure, or how much it deviates from a nominal pattern. Further, prior works do not provide automatic or algorithmic approaches for quantifying other pattern characteristics such as depths' consistency, and variations in the pattern motifs at different level sets. This paper leverages persistent homology from Topological Data Analysis (TDA) to derive noise-robust scores for quantifying motifs' depth and roundness in a pattern. Specifically, sublevel persistence is used to derive scores that quantify the consistency of indentation depths at any level set in Piezo Vibration Striking Treatment (PVST) surfaces. Moreover, we combine sublevel persistence with the distance transform to quantify the consistency of the indentation radii, and to compare them with the nominal ones. Although the tool in our PVST experiments had a semi-spherical profile, we present a generalization of our approach to tools/motifs of arbitrary shapes thus making our method applicable to other pattern-generating manufacturing processes.

cs.CG↗

arXiv2022

Topological Measures for Pattern quantification of Impact Centers in Piezo Vibration Striking Treatment (PVST)

Surface texture influences wear and tribological properties of manufactured parts, and it plays a critical role in end-user products. Therefore, quantifying the order or structure of a manufactured surface provides important information on the quality and life expectancy of the product. Although texture can be intentionally introduced to enhance aesthetics or to satisfy a design function, sometimes it is an inevitable byproduct of surface treatment processes such as Piezo Vibration Striking Treatment (PVST). Measures of order for surfaces have been characterized using statistical, spectral, and geometric approaches. For nearly hexagonal lattices, topological tools have also been used to measure the surface order. This paper utilizes tools from Topological Data Analysis for quantifying the impact centers' pattern in PVST. We compute measures of order based on optical digital microscope images of surfaces treated using PVST. These measures are applied to the grid obtained from estimating the centers of tool impacts, and they quantify the grid's deviations from the nominal one. Our results show that TDA provides a convenient framework for the characterization of pattern type that bypasses some limitations of existing tools such as difficult manual processing of the data and the need for an expert user to analyze and interpret the surface images.

cs.CG↗