arXiv subjects

Max Silva-Feaver

Publications and source records attributed to Max Silva-Feaver.

At least 19 recordsLinked to original sources

arXiv2026

Effective Sub-Quantum Readout for Non-Monochromatic Axion Signals in High-$Q$ Haloscopes

The search for wave-like dark matter using microwave cavity haloscopes is constrained by the Standard Quantum Limit, which dictates that phase-preserving linear amplification results in a minimum of one quantum of total system noise for a narrow-band signal. We demonstrate that this limit is effectively halved for a non-monochromatic axion signal coupled to a high-$Q$ cavity. By operating a Josephson Parametric Amplifier such that the cavity resonance is centered exactly at the half-pump frequency, the axion signal symmetrically populates both the signal and idler bands. Through quadrature analysis of the homodyne readout, we show that the incoherent sum of these mirrored spectral components doubles the measured signal power while the vacuum noise remains constant. This operation yields an effective noise limit of 0.5 quanta per frequency bin, translating to an overall effective limit of $1/\sqrt{2}$ quanta after optimal matched filtering.

hep-ex↗

arXiv2026

Design of ALPHA Phase I: A Plasma Haloscope for 10--20 GHz Post-Inflation Axions

The axion is a well-motivated hypothetical particle capable of resolving both the strong CP problem and the dark matter mystery, with recent post-inflationary cosmological simulations favoring masses above 40 {\mu}eV. Plasma haloscopes serve as a promising experimental approach to reach theoretically preferred sensitivities in this mass range. ALPHA, hosted at Yale Wright Laboratory, is an international collaboration developing plasma haloscopes to search for QCD dark matter axions. In this letter we present the detailed design and sensitivity projection for the first phase of the ALPHA experiment, which will search the mass range from 10 GHz to 20 GHz (~40 {\mu}eV to 80 {\mu}eV). This search will make use of wire-array plasma resonators to decouple the physical size from the resonant frequency, a limitation typically faced by traditional microwave cavities, allowing broadband sensitivity approaching KSVZ coupling strengths.

hep-ex↗

arXiv2025

The Simons Observatory: Studies of Phase Drift in RF Transmission Lines from the First Large-Scale Deployment of Microwave Frequency Multiplexing for Cosmology

Fulfilling the science goals of the Simons Observatory, a state-of-the-art cosmic microwave background (CMB) experiment, has required deploying tens of thousands of superconducting bolometers. Reading out data from the observatory's more than 67,000 transition-edge sensor (TES) detectors while maintaining cryogenic conditions requires an effective multiplexing scheme. The SLAC microresonator radio frequency (SMuRF) electronics have been developed to provide the warm electronics for a high-density microwave frequency multiplexing readout system, and this system has been shown to achieve multiplexing factors on the order of 1,000. SMuRF has recently been deployed to the Simons Observatory, which is located at 5,200 m on Cerro Toco in Chile's Atacama Desert. As the SMuRF system is exposed to the desert's diurnal temperature swings, resulting phase drift in RF transmission lines may introduce a systematic signal contamination. We present studies of phase drift in the room-temperature RF lines of the Simons Observatory's 6 m large-aperture telescope, which hosts the largest deployment to date of TES microwave frequency multiplexing to a single telescope. We show that these phase drifts occur on time scales which are significantly longer than sky scanning, and that their contribution to on-sky in-transition detector noise is within the readout noise budget.

astro-ph.IM↗

arXiv2025

The Simons Observatory: Validation of reconstructed power spectra from simulated filtered maps for the Small Aperture Telescope survey

We present a transfer function-based method to estimate angular power spectra from filtered maps for cosmic microwave background (CMB) surveys. This is especially relevant for experiments targeting the faint primordial gravitational wave signatures in CMB polarisation at large scales, such as the Simons Observatory (SO) small aperture telescopes. While timestreams can be filtered to mitigate the contamination from low-frequency noise, usual methods that calculate the mode coupling at individual multipoles can be challenging for experiments covering large sky areas or reaching few-arcminute resolution. The method we present here, although approximate, is more practical and faster for larger data volumes. We validate it through the use of simulated observations approximating the first year of SO data, going from half-wave plate-modulated timestreams to maps, and using simulations to estimate the mixing of polarisation modes induced by an example of time-domain filtering. We show its performance through an example null test and with an end-to-end pipeline that performs inference on cosmological parameters, including the tensor-to-scalar ratio $r$. The performance demonstration uses simulated observations at multiple frequency bands. We find that the method can recover unbiased parameters for our simulated noise levels.

astro-ph.CO↗

arXiv2025

Simons Observatory: Characterization of the Large Aperture Telescope Receiver

The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) survey experiment that currently consists of three 0.42m small-aperture telescopes (SATs) and one 6m large-aperture telescope (LAT), located at an elevation of 5200m in the Atacama Desert in Chile. At the LAT's focal plane, SO will install >62,000 transition-edge sensor detectors across 13 optics tubes (OTs) within the Large Aperture Telescope Receiver (LATR), the largest cryogenic camera ever built to observe the CMB. Here we report on the validation of the LATR in the laboratory and the subsequent dark testing and validation within the LAT. We show that the LATR meets cryogenic, optical, and detector specifications required for high-sensitivity measurements of the CMB. At the time of writing, the LATR is installed in the LAT with six OTs (corresponding to >31,000 detectors), and the LAT mirrors and remaining seven OTs are undergoing development.

astro-ph.IM↗

arXiv2024

The Simons Observatory: laboratory beam characterization for the first small aperture telescope

The Simons Observatory is a ground-based telescope array located at an elevation of 5200 meters, in the Atacama Desert in Chile, designed to measure the temperature and polarization of the cosmic microwave background. It comprises four telescopes: three 0.42-meter small aperture telescopes (SATs), focused on searching for primordial gravitational waves, and one 6-meter large aperture telescope, focused on studying small-scale perturbations. Each of the SATs will field over 12,000 TES bolometers, with two SATs sensitive to both 90 and 150GHz frequency bands (SAT-MF1, and SAT-MF2), while the third SAT is sensitive to 220 and 280GHz frequency bands. Prior to its deployment in 2023, the optical properties of SAT-MF1 were characterized in the laboratory. We report on measurements of near-field beam maps acquired using a thermal source along with measurements using a holographic method that enables characterization of the amplitude and phase of the beam response, yielding an estimate of the far-field radiation pattern received by SAT-MF1. We find that the near-field half-width-half-maximum (HWHM) requirements are met across the focal plane array for the 90GHz frequency band, and through most of the focal plane array for the 150GHz frequency band. The mean of the bandpass averaged HWHM of the edge-detector focal plane modules match the simulated HWHM to 10.4%, with the discrepancy caused by fringing in the simulation. The measured beam profiles match simulations to within 2dB from the beam center to at least the -10dB level. Holography estimates of the far-field 90GHz beams match the full-width-half-maximum from simulation within 1%, and the beam profiles deviate by less than 2dB inside the central lobe. The success of the holography and thermal beam map experiments confirmed the optical performance was sufficient to meet the science requirements. On-site observations are currently underway.

astro-ph.IM↗

arXiv2024

The Simons Observatory: A Minimum-Cost Matching Algorithm for Pairing Measured Resonances with Designed Detectors

The Simons Observatory (SO) is a ground-based cosmic microwave background experiment currently being deployed to Cerro Toco in the Atacama Desert of Chile. The initial deployment of SO, consisting of three 0.46m-diameter small-aperture telescopes and one 6m-primary large-aperture telescope, will field over 60,000 transition-edge sensors that will observe at frequencies between 30 GHz and 280 GHz. SO will read out its detectors using Superconducting Quantum Interference Device (SQUID) microwave-frequency multiplexing $\mu$mux, a form of frequency division multiplexing where an RF-SQUID couples each TES bolometer to a superconducting resonator tuned to a unique frequency. Resonator frequencies are spaced roughly every 2 MHz between 4 and 6 GHz, allowing for multiplexing factors on the order of 1000. One challenge of $\mu$mux is matching each tracked resonator with its corresponding physical detector. Variations in resonator fabrication, and frequency shifts between cooldowns caused by trapped flux can cause the measured resonance frequencies to deviate significantly from their designed values. In this study, we introduce a method for pairing measured and designed resonators by constructing a bipartite graph based on the two resonator sets, and assigning edge weights based on measured resonator and detector properties such as resonance frequency, detector pointing, and assigned bias lines. Finding the minimum-cost matching for a given set of edge weights is a well-studied problem that can be solved very quickly, and this matching tells us the best assignment of measured resonators to designed detectors for our input parameters. We will present results based on the first on-sky measurements from SAT1, the first SO MF small-aperture telescope.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Dark Characterization of the Large Aperture Telescope

The Simons Observatory (SO) is a cosmic microwave background experiment composed of three 0.42 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT) in the Atacama Desert of Chile. The Large Aperture Telescope Receiver (LATR) was integrated into the LAT in August 2023; however, because mirrors were not yet installed, the LATR optical chain was capped at the 4K stage. In this dark configuration we are able to characterize many elements of the instrument without contributions from atmospheric noise. Here we show this noise is below the required upper limit and its features are well described with a simple noise model. Maps produced using this noise model have properties that are in good agreement with the white noise levels of our dark data. Additionally, we show that our nominal scan strategy has a minimal effect on the noise when compared to the noise when the telescope is stationary

astro-ph.IM↗

arXiv2024

The Simons Observatory: Deployment and current configuration of the Observatory Control System for SAT-MF1 and data access software systems

The Simons Observatory (SO) is a Cosmic Microwave Background experiment located in the Atacama Desert in Chile. SO consists of three small aperture telescopes (SATs) and one large aperture telescope (LAT) with a total of 60,000 detectors in six frequency bands. As an observatory, SO encompasses hundreds of hardware components simultaneously running at different readout rates, all separate from its 60,000 detectors on-sky and their metadata. We provide an overview of commissioning SO's data acquisition software system for SAT-MF1, the first SAT deployed to the Atacama site. Additionally, we share insights from deploying data access software for all four telescopes, detailing how performance limitations affected data loading and quality investigations, which led to site-compatible software improvements.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Alarms and Detector Quality Monitoring

The Simons Observatory (SO) is a group of modern telescopes dedicated to observing the polarized cosmic microwave background (CMB), transients, and more. The Observatory consists of four telescopes and instruments, with over 60,000 superconducting detectors in total, located at ~5,200 m altitude in the Atacama Desert of Chile. During observations, it is important to ensure the detectors, telescope platforms, calibration and receiver hardware, and site hardware are within operational bounds. To facilitate rapid response when problems arise with any part of the system, it is essential that alerts are generated and distributed to appropriate personnel if components exceed these bounds. Similarly, alerts are generated if the quality of the data has become degraded. In this paper, we describe the SO alarm system we developed within the larger Observatory Control System (OCS) framework, including the data sources, alert architecture, and implementation. We also present results from deploying the alarm system during the commissioning of the SO telescopes and receivers.

astro-ph.IM↗

arXiv2024

Simons Observatory: Observatory Scheduler and Automated Data Processing

The Simons Observatory (SO) is a next-generation ground-based telescope located in the Atacama Desert in Chile, designed to map the cosmic microwave background (CMB) with unprecedented precision. The observatory consists of three small aperture telescopes (SATs) and one large aperture telescope (LAT), each optimized for distinct but complementary scientific goals. To achieve these goals, optimized scan strategies have been defined for both the SATs and LAT. This paper describes a software system deployed in SO that effectively translates high-level scan strategies into realistic observing scripts executable by the telescope, taking into account realistic observational constraints. The data volume of SO also necessitates a scalable software infrastructure to support its daily data processing needs. This paper also outlines an automated workflow system for managing data packaging and daily data reduction at the site.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Studies of Detector Yield and Readout Noise From the First Large-Scale Deployment of Microwave Multiplexing at the Large Aperture Telescope

The Simons Observatory is a new ground-based cosmic microwave background experiment, which is currently being commissioned in Chile's Atacama Desert. During its survey, the observatory's small aperture telescopes will map 10% of the sky in bands centered at frequencies ranging from 27 to 280 GHz to constrain cosmic inflation models, and its large aperture telescope will map 40% of the sky in the same bands to constrain cosmological parameters and use weak lensing to study large-scale structure. To achieve these science goals, the Simons Observatory is deploying these telescopes' receivers with 60,000 state-of-the-art superconducting transition-edge sensor bolometers for its first five year survey. Reading out this unprecedented number of cryogenic sensors, however, required the development of a novel readout system. The SMuRF electronics were developed to enable high-density readout of superconducting sensors using cryogenic microwave SQUID multiplexing technology. The commissioning of the SMuRF systems at the Simons Observatory is the largest deployment to date of microwave multiplexing technology for transition-edge sensors. In this paper, we show that a significant fraction of the systems deployed so far to the Simons Observatory's large aperture telescope meet baseline specifications for detector yield and readout noise in this early phase of commissioning.

astro-ph.IM↗

arXiv2024

Simons Observatory: Pre-deployment Performance of a Large Aperture Telescope Optics Tube in the 90 and 150 GHz Spectral Bands

The Simons Observatory will map the temperature and polarization over half of the sky, at millimeter wavelengths in six spectral bands from the Atacama Desert in Chile. These data will provide new insights into the genesis, content, and history of our Universe; the astrophysics of galaxies and galaxy clusters; objects in our solar system; and time-varying astrophysical phenomena. This ambitious new instrument suite, initially comprising three 0.5 m small-aperture telescopes and one 6 m large aperture telescope, is designed using a common combination of new technologies and new implementations to realize an observatory significantly more capable than the previous generation. In this paper, we present the pre-deployment performance of the first mid-frequency "optics tube" which will be fielded on the large aperture telescope with sensitivity to the 90 and 150 GHz spectral bands. This optics tube contains lenses, filters, detectors, and readout components, all of which operate at cryogenic temperatures. It is one of seven that form the core of the large aperture telescope receiver in its initial deployment. We describe this optics tube, including details of comprehensive testing methods, new techniques for beam and passband characterization, and its measured performance. The performance metrics include beams, optical efficiency, passbands, and forecasts for the on-sky performance of the system. We forecast a sensitivity that exceeds the requirements of the large aperture telescope with greater than 30% margin in each spectral band, and predict that the instrument will realize diffraction-limited performance and the expected detector passbands.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Design, integration, and testing of the small aperture telescopes

The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of $σ(r)=0.002$, with quantified systematic errors well below this value. Each SAT is a self-contained cryogenic telescope with a 35$^\circ$ field of view, 42 cm diameter optical aperture, 40 K half-wave plate, 1 K refractive optics, and $<0.1$ K focal plane that holds $>12,000$ TES detectors. We describe the nominal design of the SATs and present details about the integration and testing for one operating at 93 and 145 GHz.

astro-ph.IM↗

arXiv2022

The Simons Observatory: Characterizing the Large Aperture Telescope Receiver with Radio Holography

We present near-field radio holography measurements of the Simons Observatory Large Aperture Telescope Receiver optics. These measurements demonstrate that radio holography of complex millimeter-wave optical systems comprising cryogenic lenses, filters, and feed horns can provide detailed characterization of wave propagation before deployment. We used the measured amplitude and phase, at 4K, of the receiver near-field beam pattern to predict two key performance parameters: 1) the amount of scattered light that will spill past the telescope to 300K and 2) the beam pattern expected from the receiver when fielded on the telescope. These cryogenic measurements informed the removal of a filter, which led to improved optical efficiency and reduced side-lobes at the exit of the receiver. Holography measurements of this system suggest that the spilled power past the telescope mirrors will be less than 1\% and the main beam with its near side-lobes are consistent with the nominal telescope design. This is the first time such parameters have been confirmed in the lab prior to deployment of a new receiver. This approach is broadly applicable to millimeter and sub-millimeter instruments.

astro-ph.IM↗

arXiv2022

Simons Observatory Focal-Plane Module: Detector Re-biasing With Bias-step Measurements

The Simons Observatory is a ground-based cosmic microwave background survey experiment that consists of three 0.5 m small-aperture telescopes and one 6 m large-aperture telescope, sited at an elevation of 5200 m in the Atacama Desert in Chile. SO will deploy 60,000 transition-edge sensor (TES) bolometers in 49 separate focal-plane modules across a suite of four telescopes covering 30/40 GHz low frequency (LF), 90/150 GHz mid frequency (MF), and 220/280 GHz ultra-high frequency (UHF). Each MF and UHF focal-plane module packages 1720 optical detectors spreading across 12 detector bias lines that provide voltage biasing to the detectors. During observation, detectors are subject to varying atmospheric emission and hence need to be re-biased accordingly. The re-biasing process includes measuring the detector properties such as the TES resistance and responsivity in a fast manner. Based on the result, detectors within one bias line then are biased with suitable voltage. Here we describe a technique for re-biasing detectors in the modules using the result from bias-step measurement.

astro-ph.IM↗

arXiv2022

SLAC Microresonator RF (SMuRF) Electronics: A tone-tracking readout system for superconducting microwave resonator arrays

We describe the newest generation of the SLAC Microresonator RF (SMuRF) electronics, a warm digital control and readout system for microwave-frequency resonator-based cryogenic detector and multiplexer systems such as microwave SQUID multiplexers ($μ$mux) or microwave kinetic inductance detectors (MKIDs). Ultra-sensitive measurements in particle physics and astronomy increasingly rely on large arrays of cryogenic sensors, which in turn necessitate highly multiplexed readout and accompanying room-temperature electronics. Microwave-frequency resonators are a popular tool for cryogenic multiplexing, with the potential to multiplex thousands of detector channels on one readout line. The SMuRF system provides the capability for reading out up to 3328 channels across a 4-8 GHz bandwidth. Notably, the SMuRF system is unique in its implementation of a closed-loop tone-tracking algorithm that minimizes RF power transmitted to the cold amplifier, substantially relaxing system linearity requirements and effective noise from intermodulation products. Here we present a description of the hardware, firmware, and software systems of the SMuRF electronics, comparing achieved performance with science-driven design requirements. We focus in particular on the case of large channel count, low bandwidth applications, but the system has been easily reconfigured for high bandwidth applications. The system described here has been successfully deployed in lab settings and field sites around the world and is baselined for use on upcoming large-scale observatories.

physics.ins-det↗

arXiv2022

Phase Drift Monitoring for Tone Tracking Readout of Superconducting Microwave Resonators

A number of modern millimeter, sub-millimeter, and far-infrared detectors are read out using superconducting microwave (1-10GHz) resonators. The main detector technologies are Transition Edge Sensors, read out using Microwave SQUID Multiplexers ($μ$mux) and Microwave Kinetic Inductance Detectors. In these readout schemes, sky signal is encoded as resonance frequency changes. One way to interrogate these superconducting resonators is to calibrate the probe tone phase such that any sky signal induced frequency shifts from the resonators show up primarily as voltage changes in only one of the two quadratures of the interrogation tone. However, temperature variations in the operating environment produce phase drifts that degrade the phase calibration and can source low frequency noise in the final detector time ordered data if left to drift too far from optimal calibration. We present a method for active software monitoring of the time delay through the system which could be used to feedback on the resonator probe tone calibration angle or to apply an offline cleaning. We implement and demonstrate this monitoring method using the SLAC Microresonator RF Electronics on a 65 channel $μ$mux chip from NIST.

physics.ins-det↗