arXiv subjects

Max Werninghaus

Publications and source records attributed to Max Werninghaus.

15 recordsLinked to original sources

arXiv2026

A high-fidelity two-qubit gate for multimode superconducting P-mon qubits

To scale superconducting quantum processors, it is essential to achieve long coherence times while engineering interactions that do not introduce additional decoherence channels. In superconducting qubit systems, this can be realized using multimode circuits that feature a protected qubit mode alongside a distinct mediator mode. Building on this concept, our recently developed P-mon qubit provides intrinsic protection against decoherence from the readout environment. We extend this approach to controlled two-qubit interactions, by exploiting the mediator modes of P-mons for on-demand coupling. Because direct interactions between the qubit modes are strongly suppressed, unwanted $ZZ$-type interactions are significantly reduced to below $3.6(5)~\text{kHz}$ in the idle state. When tuning the coupled mediator modes on resonance, the cross-Kerr interaction between the qubit and the hybridized mediator modes leads to a qubit-state dependent frequency shift. By selectively addressing these transitions, we implement a $180~\text{ns}$ long CZ gate and determine a fidelity of $99.62(4)~\text{%}$. These results represent a significant step toward a scalable superconducting architecture that maintains high performance at scale.

quant-ph↗

arXiv2026

Dynamical Decoupling using Universal Optimal Tracking

Dynamical decoupling (DD) is a widely used and resource-efficient technique for error suppression, but conventional DD relies on periodically repeating a short pulse block to refocus the qubit state during idle periods. Imperfections in this block cause residual errors to accumulate, ultimately degrading state recovery over long idle times. Here, we introduce a universal optimal tracking approach that extends the original tracking concept to a fully state-independent setting for designing DD sequences. By monitoring the qubit's evolution at predefined waypoints during optimization, the method dynamically compensates residual errors while preserving regular refocusing. Experimental demonstrations on a superconducting-qubit platform confirm the suppression of error accumulation under static control imperfections, in agreement with numerical predictions. Complementary simulations further show that optimal-tracking-based sequences maintain strong performance under time-dependent noise. These results establish optimal tracking as a practical and hardware-agnostic approach to designing short, robust DD sequences suitable for noisy quantum devices.

quant-ph↗

arXiv2026

Scalable Single-Step Generation of W States in 2D Superconducting Qubit Lattices

The reliable generation of multi-qubit entanglement is a prerequisite for large-scale quantum information technologies. In particular, W states are a valuable resource owing to their resilience under local loss or measurement. Nevertheless, preparing these states with sequential two-qubit gates often requires substantial time overhead. By contrast, engineered simultaneous interactions enable fast entanglement generation, even in qubit systems with limited nearest-neighbour connectivity. Here, we demonstrate a set of fast and robust operations for coherently distributing a single excitation across a lattice of arbitrary size, thereby directly generating W states from initial product states. In 2D lattices, the excitation propagates along both directions simultaneously, such that the total entanglement time scales only with the largest dimension. We exploit this property to prepare a six-qubit W state in a 3$\times$2 superconducting lattice within 99 ns, achieving a tomographic fidelity of 83.9$\pm$1.0%. We then extend the protocol to create entanglement across chains of up to seven qubits, with the largest W state generated in 264 ns with a fidelity of 79.6$\pm$1.3%.

quant-ph↗

arXiv2025

Superconducting Qubit Gates Robust to Parameter Fluctuations

State-of-the-art single-qubit gates on superconducting transmon qubits can achieve the fidelities required for error-corrected computations. However, parameter fluctuations due to qubit instabilities, environmental changes, and control inaccuracies make it difficult to maintain this performance. To mitigate the effects of these parameter variations, we numerically derive gates robust to amplitude and frequency errors using gradient ascent pulse engineering (GRAPE). We analyze how fluctuations in qubit frequency, drive amplitude, and coherence affect gate performance over time. The robust pulses suppress coherent errors from drive amplitude drifts over 15 times more than a Gaussian pulse with derivative removal by adiabatic gate (DRAG) corrections. Furthermore, the robust gates, originally designed to compensate for quasi-static errors, also demonstrate resilience to stochastic, time-dependent noise, which is reflected in the dephasing time. They suppress added errors during increases in dephasing by up to 1.7 times more than DRAG.

quant-ph↗

arXiv2025

Tackling the Challenges of Adding Pulse-level Support to a Heterogeneous HPCQC Software Stack: MQSS Pulse

We study the problem of adding native pulse-level control to heterogeneous High Performance Computing-Quantum Computing (HPCQC) software stacks, using the Munich Quantum Software Stack (MQSS) as a case study. The goal is to expand the capabilities of HPCQC environments by offering the ability for low-level access and control, currently typically not foreseen for such hybrid systems. For this, we need to establish new interfaces that integrate such pulse-level control into the lower layers of the software stack, including the need for proper representation. Pulse-level quantum programs can be fully described with only three low-level abstractions: ports (input/output channels), frames (reference signals), and waveforms (pulse envelopes). We identify four key challenges to represent those pulse abstractions at: the user-interface level, at the compiler level (including the Intermediate Representation (IR)), and at the backend-interface level (including the appropriate exchange format). For each challenge, we propose concrete solutions in the context of MQSS. These include introducing a compiled (C/C++) pulse Application Programming Interface (API) to overcome Python runtime overhead, extending its LLVM support to include pulse-related instructions, using its C-based backend interface to query relevant hardware constraints, and designing a portable exchange format for pulse sequences. Our integrated approach provides an end-to-end path for pulse-aware compilation and runtime execution in HPCQC environments. This work lays out the architectural blueprint for extending HPCQC integration to support pulse-level quantum operations without disrupting state-of-the-art classical workflows.

quant-ph↗

arXiv2025

Quantum Entrepreneurship Lab: Training a Future Workforce for the Quantum Industry

The Quantum Entrepreneurship Lab (QEL) is a one-semester, project-based course at the Technical University of Munich (TUM), designed to bridge the gap between academic research and industrial application in the quantum sector. As part of the Munich Quantum Valley (MQV) ecosystem, the course fosters interdisciplinary collaboration between technical and business students, equipping them with the skills necessary to contribute to or lead in the emerging quantum industry. The QEL curriculum integrates two complementary tracks. First, technical students form teams where they engage in cutting-edge, industry-relevant research topics under academic supervision. Meanwhile business students in a parallel course explore commercialization strategies, risks, and opportunities within the quantum technology landscape. Midway through the semester, a selection of the business students join the technical course to form interdisciplinary teams which assess the feasibility of transforming scientific concepts into viable business solutions. The course culminates in three key deliverables: a publication-style technical report, a white paper analyzing the business potential and financial requirements, and a startup pitch presented to the quantum community at a Demo Day. This work outlines the course structure, objectives, and outcomes, providing a model for other institutions seeking to cultivate a highly skilled, innovation-driven workforce in quantum science and technology.

physics.ed-ph↗

arXiv2024

Sensitivity-Adapted Closed-Loop Optimization for High-Fidelity Controlled-Z Gates in Superconducting Qubits

Achieving fast and high-fidelity qubit operations is crucial for unlocking the potential of quantum computers. In particular, reaching low gate errors in two-qubit gates has been a long-standing challenge in the field of superconducting qubits due to their typically long duration relative to coherence times. To realize fast gates, we utilize the hybridization between fixed-frequency superconducting qubits with a strongly interacting coupler mode that is tunable in frequency. To reduce population leakage during required adiabatic passages through avoided level crossings, we employ a sensitivity-adaptive closed-loop optimization method to design complex pulse shapes. We compare the performance of Gaussian-square, Fourier-series, and piecewise-constant-slope (PiCoS) pulse parametrizations and are able to reach 99.9 % controlled-Z gate fidelity using a 64 ns long Fourier-series pulse defined by only seven parameters. These high-fidelity values are achieved by analyzing the optimized pulse shapes to identify and systematically mitigate signal-line distortions in the experiment. To improve the convergence speed of the optimization we implement an adaptive cost function, which continuously maximizes the sensitivity. The demonstrated method can be used for tune-up and recalibration of superconducting quantum processors.

quant-ph↗

arXiv2024

Sub-Harmonic Control of a Fluxonium Qubit via a Purcell-Protected Flux Line

Protecting qubits from environmental noise while maintaining strong coupling for fast high-fidelity control is a central challenge for quantum information processing. Here, we demonstrate a control scheme for superconducting fluxonium qubits that eliminates qubit decay through the control channel by suppressing the environmental density of states at the transition frequency. Adding a low-pass filter on the flux line allows for flux-biasing and, at the same time, coherently controlling the fluxonium qubit by parametrically driving it at integer fractions of its transition frequency. We compare the filtered to the unfiltered configuration and find a five times longer $T_1$, and ten times improved $T_2$-echo time in the filtered case. We demonstrate coherent control with up to 11-photon sub-harmonic drives, highlighting the strong non-linearity of the fluxonium potential. Measured Rabi frequencies and drive-induced frequency shifts show excellent agreement with numerical and analytical models. Furthermore, we show the equivalence of a 3-photon sub-harmonic drive to an on-resonance drive by benchmarking sub-harmonic gate fidelities above 99.94$\,$%. These results open up a scalable path for full qubit control through a single Purcell-protected channel, providing strong suppression of control-induced decoherence and enabling wiring-efficient superconducting quantum processors.

quant-ph↗

arXiv2024

Parity-dependent state transfer for direct entanglement generation

As quantum information technologies advance, challenges in scaling and connectivity persist, particularly the need for long-range qubit connectivity and efficient entanglement generation. Perfect State Transfer enables time-optimal state transfer between distant qubits using only nearest-neighbor couplings, enhancing device connectivity. Moreover, the transfer protocol results in effective parity-dependent non-local interactions, extending its utility to entanglement generation. Here, we experimentally demonstrate Perfect State Transfer and multi-qubit entanglement generation on a chain of six superconducting transmon qubits with tunable couplers, controlled via parametric drives. By simultaneously activating and engineering all couplings, we implement the transfer for up to six qubits, verifying single-excitation dynamics for different initial states. Extending the protocol to multiple excitations, we confirm its parity-dependent nature, where excitation number controls the phase of the transferred state. Finally, leveraging this property, we prepare a Greenberger-Horne-Zeilinger state using a single transfer operation, showcasing the potential of Perfect State Transfer for efficient entanglement generation.

quant-ph↗

arXiv2023

Efficient decoupling of a non-linear qubit mode from its environment

To control and measure the state of a quantum system it must necessarily be coupled to external degrees of freedom. This inevitably leads to spontaneous emission via the Purcell effect, photon-induced dephasing from measurement back-action, and errors caused by unwanted interactions with nearby quantum systems. To tackle this fundamental challenge, we make use of the design flexibility of superconducting quantum circuits to form a multi-mode element -- an artificial molecule -- with symmetry-protected modes. The proposed circuit consists of three superconducting islands coupled to a central island via Josephson junctions. It exhibits two essential non-linear modes, one of which is flux-insensitive and used as the protected qubit mode. The second mode is flux-tunable and serves via a cross-Kerr type coupling as a mediator to control the dispersive coupling of the qubit mode to the readout resonator. We demonstrate the Purcell protection of the qubit mode by measuring relaxation times that are independent of the mediated dispersive coupling. We show that the coherence of the qubit is not limited by photon-induced dephasing when detuning the mediator mode from the readout resonator and thereby reducing the dispersive coupling. The resulting highly protected qubit with tunable interactions may serve as a basic building block of a scalable quantum processor architecture, in which qubit decoherence is strongly suppressed.

quant-ph↗

arXiv2022

Integrated tool-set for Control, Calibration and Characterization of quantum devices applied to superconducting qubits

Efforts to scale-up quantum computation have reached a point where the principal limiting factor is not the number of qubits, but the entangling gate infidelity. However, the highly detailed system characterization required to understand the underlying error sources is an arduous process and impractical with increasing chip size. Open-loop optimal control techniques allow for the improvement of gates but are limited by the models they are based on. To rectify the situation, we provide an integrated open-source tool-set for Control, Calibration and Characterization, capable of open-loop pulse optimization, model-free calibration, model fitting and refinement. We present a methodology to combine these tools to find a quantitatively accurate system model, high-fidelity gates and an approximate error budget, all based on a high-performance, feature-rich simulator. We illustrate our methods using simulated fixed-frequency superconducting qubits for which we learn model parameters with less than 1% error and derive a coherence limited cross-resonance (CR) gate that achieves 99.6% fidelity without need for calibration.

quant-ph↗

arXiv2021

Direct implementation of a perceptron in superconducting circuit quantum hardware

The utility of classical neural networks as universal approximators suggests that their quantum analogues could play an important role in quantum generalizations of machine-learning methods. Inspired by the proposal in [Torrontegui and García-Ripoll 2019 EPL 125 30004], we demonstrate a superconducting qubit implementation of an adiabatic controlled gate, which generalizes the action of a classical perceptron as the basic building block of a quantum neural network. We show full control over the steepness of the perceptron activation function, the input weight and the bias by tuning the adiabatic gate length, the coupling between the qubits and the frequency of the applied drive, respectively. In its general form, the gate realizes a multi-qubit entangling operation in a single step, whose decomposition into single- and two-qubit gates would require a number of gates that is exponential in the number of qubits. Its demonstrated direct implementation as perceptron in quantum hardware may therefore lead to more powerful quantum neural networks when combined with suitable additional standard gates.

quant-ph↗

arXiv2020

High-speed calibration and characterization of superconducting quantum processors without qubit reset

To Characterize and calibrate quantum processing devices a large amount of measurement data has to be collected. Active qubit reset increases the speed at which data can be gathered but requires additional hardware and/or calibration. The experimental apparatus can, however, be operated at elevated repetition rates without reset. In this case, the outcome of a first measurement serves as the initial state for the next experiment. Rol. $\textit{et al.}$ used this restless operation mode to accelerate the calibration of a single-qubit gate by measuring fixed-length sequences of Clifford gates which compose to $X$ gates [Phys. Rev. Appl. $7$, 041001 (2017)]. However, we find that, when measuring pulse sequences which compose to arbitrary operations, a distortion appears in the measured data. Here, we extend the restless methodology by showing how to efficiently analyze restless measurements and correct distortions to achieve an identical outcome and accuracy as compared to measurements in which the superconducting qubits are reset. This allows us to rapidly characterize and calibrate qubits. We illustrate our data collection and analysis method by measuring a Rabi oscillation at a $250~\rm{kHz}$ repetition rate without any reset, for a qubit with a decay rate of $1/2πT_1=3~\rm{kHz}$. We also show that we can measure a single- and a two-qubit average gate fidelity with Randomized Benchmarking 20 and 8 times faster, respectively, than measurements that reset the qubits through $T_1$-decay.

quant-ph↗

arXiv2020

Leakage reduction in fast superconducting qubit gates via optimal control

Reaching high speed, high fidelity qubit operations requires precise control over the shape of the underlying pulses. For weakly anharmonic systems, such as superconducting transmon qubits, short gates lead to leakage to states outside of the computational subspace. Control pulses designed with open-loop optimal control may reduce such leakage. However, model inaccuracies can severely limit the usability of such pulses. We implemented a closed-loop optimization that simultaneously adapts all control parameters based on measurements of a cost function built from Clifford gates. By parameterizing pulses with a piecewise-constant representation that matches the capabilities of the control hardware we create a $4.16~\rm{ns}$ single-qubit pulse with $99.76\,\%$ fidelity and $0.044\,\%$ leakage. This is a seven-fold reduction of the leakage rate of the best DRAG pulse we have calibrated at such short durations on the same system.

quant-ph↗

arXiv2019

Pulsed reset protocol for fixed-frequency superconducting qubits

Improving coherence times of quantum bits is a fundamental challenge in the field of quantum computing. With long-lived qubits it becomes, however, inefficient to wait until the qubits have relaxed to their ground state after completion of an experiment. Moreover, for error-correction schemes it is import to rapidly re-initialize ancilla parity-check qubits. We present a simple pulsed qubit reset protocol based on a two-pulse sequence. A first pulse transfers the excited state population to a higher excited qubit state and a second pulse into a lossy environment provided by a low-Q transmission line resonator, which is also used for qubit readout. We show that the remaining excited state population can be suppressed to $2.2\pm0.8\%$ and utilize the pulsed reset protocol to carry out experiments at enhanced rates.

quant-ph↗