SearcharxivSearch

arXiv subjects

Maxime Rizzo

Publications and source records attributed to Maxime Rizzo.

6 recordsLinked to original sources

Nancy Grace Roman Space Telescope Wide Field Instrument: Bright Point Source Saturation Response and Persistence Properties from Thermal-Vacuum Testing

The Nancy Grace Roman Space Telescope's Wide Field Instrument (WFI) will observe hundreds of thousands of bright stars across its Core Community Surveys, particularly in the dense stellar fields of the Galactic Bulge Time Domain Survey (GBTDS). Sources brighter than ~17th magnitude will saturate WFI detector pixels in typical survey exposures, with the brightest stars deeply saturating large pixel regions and potentially producing persistence signals that may impact subsequent observations. Prior detector characterization did not explore the regime of deep point source saturation. To address this gap, we conducted a bright star saturation test during WFI's second Thermal Vacuum test campaign (TVAC2) at BAE Space & Mission Systems in Boulder, CO. Using the Stimulus of Ray Cones (SORC) telescope simulator, we projected nine in-focus point sources through the F146 filter onto two Sensor Chip Assemblies (SCAs), with fluxes tuned to approximate stellar magnitudes ranging from ~4 to ~18 in ~170 s exposures. We present analyses of the saturation response and persistence properties of these detectors. We find that the saturated region of a ~4 mag source grows to ~150 pixels in diameter after ~170 s of illumination, compared to ~15 pixels for a ~12 mag source. Pixels adjacent to the expanding saturation front exhibit pronounced non-linear behavior consistent with charge leakage from saturated neighbors. For persistence, we find that the median signal in the first post-illumination dark exposure is broadly consistent across source magnitudes spanning ~4 to ~17, and that persistence decays to detector background levels ($\lesssim$0.05 e$^{-}$ s$^{-1}$) within approximately 20 minutes, consistent with flat field persistence measurements from the same TVAC2 campaign. These pre-flight characterization results inform community understanding of WFI detector response to prepare for Roman science.

astro-ph.IM

Starshade Rendezvous: Exoplanet Sensitivity and Observing Strategy

Launching a starshade to rendezvous with the Nancy Grace Roman Space Telescope would provide the first opportunity to directly image the habitable zones of nearby sunlike stars in the coming decade. A report on the science and feasibility of such a mission was recently submitted to NASA as a probe study concept. The driving objective of the concept is to determine whether Earth-like exoplanets exist in the habitable zones of the nearest sunlike stars and have biosignature gases in their atmospheres. With the sensitivity provided by this telescope, it is possible to measure the brightness of zodiacal dust disks around the nearest sunlike stars and establish how their population compares to our own. In addition, known gas-giant exoplanets can be targeted to measure their atmospheric metallicity and thereby determine if the correlation with planet mass follows the trend observed in the Solar System and hinted at by exoplanet transit spectroscopy data. In this paper we provide the details of the calculations used to estimate the sensitivity of Roman with a starshade and describe the publicly available Python-based source code used to make these calculations. Given the fixed capability of Roman and the constrained observing windows inherent for the starshade, we calculate the sensitivity of the combined observatory to detect these three types of targets and we present an overall observing strategy that enables us to achieve these objectives.

astro-ph.IM

High-Contrast Integral Field Spectrograph (HCIFS): multi-spectral wavefront control and reduced-dimensional system identification

Any high-contrast imaging instrument in a future large space-based telescope will include an integral field spectrograph (IFS) for measuring broadband starlight residuals and characterizing the exoplanet's atmospheric spectrum. In this paper, we report the development of a high-contrast integral field spectrograph (HCIFS) at Princeton University and demonstrate its application in multi-spectral wavefront control. Moreover, we propose and experimentally validate a new reduced-dimensional system identification algorithm for an IFS imaging system, which improves the system's wavefront control speed, contrast and computational and data storage efficiency.

astro-ph.IM

Key Technologies for the Wide Field Infrared Survey Telescope Coronagraph Instrument

The Wide Field Infrared Survey Telescope (WFIRST) Coronagraph Instrument (CGI) is a high-contrast imager and integral field spectrograph that will enable the study of exoplanets and circumstellar disks at visible wavelengths. Ground-based high-contrast instrumentation has fundamentally limited performance at small working angles, even under optimistic assumptions for 30m-class telescopes. There is a strong scientific driver for better performance, particularly at visible wavelengths. Future flagship mission concepts aim to image Earth analogues with visible light flux ratios of more than 10^10. CGI is a critical intermediate step toward that goal, with a predicted 10^8-9 flux ratio capability in the visible. CGI achieves this through improvements over current ground and space systems in several areas: (i) Hardware: space-qualified (TRL9) deformable mirrors, detectors, and coronagraphs, (ii) Algorithms: wavefront sensing and control; post-processing of integral field spectrograph, polarimetric, and extended object data, and (iii) Validation of telescope and instrument models at high accuracy and precision. This white paper, submitted to the 2018 NAS Exoplanet Science Strategy call, describes the status of key CGI technologies and presents ways in which performance is likely to evolve as the CGI design matures.

astro-ph.IM

The WFIRST Exoplanet Microlensing Survey

The Wide Field Infrared Survey Telescope (WFIRST) was the top ranked large space mission in the 2010 New Worlds, New Horizons decadal survey, and it was formed by merging the science programs of 3 different mission concepts, including the Microlensing Planet Finder (MPF) concept (Bennett \etal\ 2010). The WFIRST science program (Spergel \etal\ 2015) consists of a general observer program, a wavefront controlled technology program, and two targeted science programs: a program to study dark energy, and a statistical census of exoplanets with a microlensing survey, which uses nearly one quarter of WFIRST's observing time in the current design reference mission. The New Worlds, New Horizons (decadal survey) midterm assessment summarizes the science case for the WFIRST exoplanet microlensing survey with this statement: "WFIRST's microlensing census of planets beyond 1 AU will perfectly complement Kepler's census of compact systems, and WFIRST will also be able to detect free-floating planets unbound from their parent stars\rlap."

astro-ph.EP

Data Reduction Pipeline for the CHARIS Integral-Field Spectrograph I: Detector Readout Calibration and Data Cube Extraction

We present the data reduction pipeline for CHARIS, a high-contrast integral-field spectrograph for the Subaru Telescope. The pipeline constructs a ramp from the raw reads using the measured nonlinear pixel response, and reconstructs the data cube using one of three extraction algorithms: aperture photometry, optimal extraction, or $χ^2$ fitting. We measure and apply both a detector flatfield and a lenslet flatfield and reconstruct the wavelength- and position-dependent lenslet point-spread function (PSF) from images taken with a tunable laser. We use these measured PSFs to implement a $χ^2$-based extraction of the data cube, with typical residuals of ~5% due to imperfect models of the undersampled lenslet PSFs. The full two-dimensional residual of the $χ^2$ extraction allows us to model and remove correlated read noise, dramatically improving CHARIS' performance. The $χ^2$ extraction produces a data cube that has been deconvolved with the line-spread function, and never performs any interpolations of either the data or the individual lenslet spectra. The extracted data cube also includes uncertainties for each spatial and spectral measurement. CHARIS' software is parallelized, written in Python and Cython, and freely available on github with a separate documentation page. Astrometric and spectrophotometric calibrations of the data cubes and PSF subtraction will be treated in a forthcoming paper.

astro-ph.IM