arXiv subjects

Maximilian Neidhardt

Publications and source records attributed to Maximilian Neidhardt.

13 recordsLinked to original sources

arXiv2026

6D Robotic OCT Scanning of Curved Tissue Surfaces

Optical coherence tomography (OCT) is a non-invasive volumetric imaging modality with high spatial and temporal resolution. For imaging larger tissue structures, OCT probes need to be moved to scan the respective area. For handheld scanning, stitching of the acquired OCT volumes requires overlap to register the images. For robotic scanning and stitching, a typical approach is to restrict the motion to translations, as this avoids a full hand-eye calibration, which is complicated by the small field of view of most OCT probes. However, stitching by registration or by translational scanning are limited when curved tissue surfaces need to be scanned. We propose a marker for full six-dimensional hand-eye calibration of a robot mounted OCT probe. We show that the calibration results in highly repeatable estimates of the transformation. Moreover, we evaluate robotic scanning of two phantom surfaces to demonstrate that the proposed calibration allows for consistent scanning of large, curved tissue surfaces. As the proposed approach is not relying on image registration, it does not suffer from a potential accumulation of errors along a scan path. We also illustrate the improvement compared to conventional 3D-translational robotic scanning.

cs.CV↗

arXiv2025

Deep Learning for High Speed Optical Coherence Elastography with a Fiber Scanning Endoscope

Tissue stiffness is related to soft tissue pathologies and can be assessed through palpation or via clinical imaging systems, e.g., ultrasound or magnetic resonance imaging. Typically, the image based approaches are not suitable during interventions, particularly for minimally invasive surgery. To this end, we present a miniaturized fiber scanning endoscope for fast and localized elastography. Moreover, we propose a deep learning based signal processing pipeline to account for the intricate data and the need for real-time estimates. Our elasticity estimation approach is based on imaging complex and diffuse wave fields that encompass multiple wave frequencies and propagate in various directions. We optimize the probe design to enable different scan patterns. To maximize temporal sampling while maintaining three-dimensional information we define a scan pattern in a conical shape with a temporal frequency of 5.05 kHz. To efficiently process the image sequences of complex wave fields we consider a spatio-temporal deep learning network. We train the network in an end-to-end fashion on measurements from phantoms representing multiple elasticities. The network is used to obtain localized and robust elasticity estimates, allowing to create elasticity maps in real-time. For 2D scanning, our approach results in a mean absolute error of 6.31+-5.76 kPa compared to 11.33+-12.78 kPa for conventional phase tracking. For scanning without estimating the wave direction, the novel 3D method reduces the error to 4.48+-3.63 kPa compared to 19.75+-21.82 kPa for the conventional 2D method. Finally, we demonstrate feasibility of elasticity estimates in ex-vivo porcine tissue.

eess.SP↗

arXiv2025

A Digital Twin for Robotic Post Mortem Tissue Sampling using Virtual Reality

Studying tissue samples obtained during autopsies is the gold standard when diagnosing the cause of death and for understanding disease pathophysiology. Recently, the interest in post mortem minimally invasive biopsies has grown which is a less destructive approach in comparison to an open autopsy and reduces the risk of infection. While manual biopsies under ultrasound guidance are more widely performed, robotic post mortem biopsies have been recently proposed. This approach can further reduce the risk of infection for physicians. However, planning of the procedure and control of the robot need to be efficient and usable. We explore a virtual reality setup with a digital twin to realize fully remote planning and control of robotic post mortem biopsies. The setup is evaluated with forensic pathologists in a usability study for three interaction methods. Furthermore, we evaluate clinical feasibility and evaluate the system with three human cadavers. Overall, 132 needle insertions were performed with an off-axis needle placement error of 5.30+-3.25 mm. Tissue samples were successfully biopsied and histopathologically verified. Users reported a very intuitive needle placement approach, indicating that the system is a promising, precise, and low-risk alternative to conventional approaches.

cs.RO↗

arXiv2024

A Calibration Approach for Elasticity Estimation with Medical Tools

Soft tissue elasticity is directly related to different stages of diseases and can be used for tissue identification during minimally invasive procedures. By palpating a tissue with a robot in a minimally invasive fashion force-displacement curves can be acquired. However, force-displacement curves strongly depend on the tool geometry which is often complex in the case of medical tools. Hence, a tool calibration procedure is desired to directly map force-displacement curves to the corresponding tissue elasticity.We present an experimental setup for calibrating medical tools with a robot. First, we propose to estimate the elasticity of gelatin phantoms by spherical indentation with a state-of-the-art contact model. We estimate force-displacement curves for different gelatin elasticities and temperatures. Our experiments demonstrate that gelatin elasticity is highly dependent on temperature, which can lead to an elasticity offset if not considered. Second, we propose to use a more complex material model, e.g., a neural network, that can be trained with the determined elasticities. Considering the temperature of the gelatin sample we can represent different elasticities per phantom and thereby increase our training data.We report elasticity values ranging from 10 to 40 kPa for a 10% gelatin phantom, depending on temperature.

q-bio.TO↗

arXiv2024

A Modified da Vinci Surgical Instrument for OCE based Elasticity Estimation with Deep Learning

Robot-assisted surgery has advantages compared to conventional laparoscopic procedures, e.g., precise movement of the surgical instruments, improved dexterity, and high-resolution visualization of the surgical field. However, mechanical tissue properties may provide additional information, e.g., on the location of lesions or vessels. While elastographic imaging has been proposed, it is not readily available as an online modality during robot-assisted surgery. We propose modifying a da~Vinci surgical instrument to realize optical coherence elastography (OCE) for quantitative elasticity estimation. The modified da~Vinci instrument is equipped with piezoelectric elements for shear wave excitation and we employ fast optical coherence tomography (OCT) imaging to track propagating wave fields, which are directly related to biomechanical tissue properties. All high-voltage components are mounted at the proximal end outside the patient. We demonstrate that external excitation at the instrument shaft can effectively stimulate shear waves, even when considering damping. Comparing conventional and deep learning-based signal processing, resulting in mean absolute errors of 19.27 kPa and 6.29 kPa, respectively. These results illustrate that precise quantitative elasticity estimates can be obtained. We also demonstrate quantitative elasticity estimation on ex-vivo tissue samples of heart, liver and stomach, and show that the measurements can be used to distinguish soft and stiff tissue types.

eess.IV↗

arXiv2023

Collaborative Robotic Biopsy with Trajectory Guidance and Needle Tip Force Feedback

The diagnostic value of biopsies is highly dependent on the placement of needles. Robotic trajectory guidance has been shown to improve needle positioning, but feedback for real-time navigation is limited. Haptic display of needle tip forces can provide rich feedback for needle navigation by enabling localization of tissue structures along the insertion path. We present a collaborative robotic biopsy system that combines trajectory guidance with kinesthetic feedback to assist the physician in needle placement. The robot aligns the needle while the insertion is performed in collaboration with a medical expert who controls the needle position on site. We present a needle design that senses forces at the needle tip based on optical coherence tomography and machine learning for real-time data processing. Our robotic setup allows operators to sense deep tissue interfaces independent of frictional forces to improve needle placement relative to a desired target structure. We first evaluate needle tip force sensing in ex-vivo tissue in a phantom study. We characterize the tip forces during insertions with constant velocity and demonstrate the ability to detect tissue interfaces in a collaborative user study. Participants are able to detect 91% of ex-vivo tissue interfaces based on needle tip force feedback alone. Finally, we demonstrate that even smaller, deep target structures can be accurately sampled by performing post-mortem in situ biopsies of the pancreas.

cs.RO↗

arXiv2022

Ultrasound Shear Wave Elasticity Imaging with Spatio-Temporal Deep Learning

Ultrasound shear wave elasticity imaging is a valuable tool for quantifying the elastic properties of tissue. Typically, the shear wave velocity is derived and mapped to an elasticity value, which neglects information such as the shape of the propagating shear wave or push sequence characteristics. We present 3D spatio-temporal CNNs for fast local elasticity estimation from ultrasound data. This approach is based on retrieving elastic properties from shear wave propagation within small local regions. A large training data set is acquired with a robot from homogeneous gelatin phantoms ranging from 17.42 kPa to 126.05 kPa with various push locations. The results show that our approach can estimate elastic properties on a pixelwise basis with a mean absolute error of 5.01+-4.37 kPa. Furthermore, we estimate local elasticity independent of the push location and can even perform accurate estimates inside the push region. For phantoms with embedded inclusions, we report a 53.93% lower MAE (7.50 kPa) and on the background of 85.24% (1.64 kPa) compared to a conventional shear wave method. Overall, our method offers fast local estimations of elastic properties with small spatio-temporal window sizes.

eess.IV↗

arXiv2022

Modeling R$^3$ Needle Steering in Uppaal

Medical cyber-physical systems are safety-critical, and as such, require ongoing verification of their correct behavior, as system failure during run time may cause severe (or even fatal) personal damage. However, creating a verifiable model often conflicts with other application requirements, most notably regarding data precision and model accuracy, as efficient model checking promotes discrete data (over continuous) and abstract models to reduce the state space. In this paper, we approach the task of medical needle steering in soft tissue around potential obstacles. We design a verifiable model of needle motion (implemented in Uppaal Stratego) and a framework embedding the model for online needle steering. We mitigate the conflict by imposing boundedness on both the data types, reducing from R^3 to Z^3 when needed, and the motion and environment models, reducing the set of allowed local actions and global paths. In experiments, we successfully apply the static model alone, as well as the dynamic framework in scenarios with varying environment complexity and both a virtual and real needle setting, where up to 100% of targets were reached depending on the scenario and needle.

eess.SY↗

arXiv2022

Robotic Tissue Sampling for Safe Post-mortem Biopsy in Infectious Corpses

In pathology and legal medicine, the histopathological and microbiological analysis of tissue samples from infected deceased is a valuable information for developing treatment strategies during a pandemic such as COVID-19. However, a conventional autopsy carries the risk of disease transmission and may be rejected by relatives. We propose minimally invasive biopsy with robot assistance under CT guidance to minimize the risk of disease transmission during tissue sampling and to improve accuracy. A flexible robotic system for biopsy sampling is presented, which is applied to human corpses placed inside protective body bags. An automatic planning and decision system estimates optimal insertion point. Heat maps projected onto the segmented skin visualize the distance and angle of insertions and estimate the minimum cost of a puncture while avoiding bone collisions. Further, we test multiple insertion paths concerning feasibility and collisions. A custom end effector is designed for inserting needles and extracting tissue samples under robotic guidance. Our robotic post-mortem biopsy (RPMB) system is evaluated in a study during the COVID-19 pandemic on 20 corpses and 10 tissue targets, 5 of them being infected with SARS-CoV-2. The mean planning time including robot path planning is (5.72+-1.67) s. Mean needle placement accuracy is (7.19+-4.22) mm.

cs.RO↗

arXiv2021

Online Strategy Synthesis for Safe and Optimized Control of Steerable Needles

Autonomous systems are often applied in uncertain environments, which require prospective action planning and retrospective data evaluation for future planning to ensure safe operation. Formal approaches may support these systems with safety guarantees, but are usually expensive and do not scale well with growing system complexity. In this paper, we introduce online strategy synthesis based on classical strategy synthesis to derive formal safety guarantees while reacting and adapting to environment changes. To guarantee safety online, we split the environment into region types which determine the acceptance of action plans and trigger local correcting actions. Using model checking on a frequently updated model, we can then derive locally safe action plans (prospectively), and match the current model against new observations via reachability checks (retrospectively). As use case, we successfully apply online strategy synthesis to medical needle steering, i.e., navigating a (flexible and beveled) needle through tissue towards a target without damaging its surroundings.

eess.SY↗

arXiv2020

Deep Learning for High Speed Optical Coherence Elastography

Mechanical properties of tissue provide valuable information for identifying lesions. One approach to obtain quantitative estimates of elastic properties is shear wave elastography with optical coherence elastography (OCE). However, given the shear wave velocity, it is still difficult to estimate elastic properties. Hence, we propose deep learning to directly predict elastic tissue properties from OCE data. We acquire 2D images with a frame rate of 30 kHz and use convolutional neural networks to predict gelatin concentration, which we use as a surrogate for tissue elasticity. We compare our deep learning approach to predictions from conventional regression models, using the shear wave velocity as a feature. Mean absolut prediction errors for the conventional approaches range from 1.32$\pm$0.98 p.p. to 1.57$\pm$1.30 p.p. whereas we report an error of 0.90$\pm$0.84 p.p for the convolutional neural network with 3D spatio-temporal input. Our results indicate that deep learning on spatio-temporal data outperforms elastography based on explicit shear wave velocity estimation.

eess.IV↗

arXiv2020

Synthesizing Strategies for Needle Steering in Gelatin Phantoms

In medicine, needles are frequently used to deliver treatments to subsurface targets or to take tissue samples from the inside of an organ. Current clinical practice is to insert needles under image guidance or haptic feedback, although that may involve reinsertions and adjustments since the needle and its interaction with the tissue during insertion cannot be completely controlled. (Automated) needle steering could in theory improve the accuracy with which a target is reached and thus reduce surgical traumata especially for minimally invasive procedures, e.g., brachytherapy or biopsy. Yet, flexible needles and needle-tissue interaction are both complex and expensive to model and can often be computed approximatively only. In this paper we propose to employ timed games to navigate flexible needles with a bevel tip to reach a fixed target in tissue. We use a simple non-holonomic model of needle-tissue interaction, which abstracts in particular from the various physical forces involved and appears to be simplistic compared to related models from medical robotics. Based on the model, we synthesize strategies from which we can derive sufficiently precise motion plans to steer the needle in soft tissue. However, applying those strategies in practice, one is faced with the problem of an unpredictable behavior of the needle at the initial insertion point. Our proposal is to implement a preprocessing step to initialize the model based on data from the real system, once the needle is inserted. Taking into account the actual needle tip angle and position, we generate strategies to reach the desired target. We have implemented the model in Uppaal Stratego and evaluated it on steering a flexible needle in gelatin phantoms; gelatin phantoms are commonly used in medical technology to simulate the behavior of soft tissue. The experiments show that strategies can be synthesized for both generated and measured needle motions with a maximum deviation of 1.84mm.

eess.SY↗

arXiv2020

High-Speed Markerless Tissue Motion Tracking Using Volumetric Optical Coherence Tomography Images

Modern optical coherence tomography (OCT) devices provide volumetric images with micrometer-scale spatial resolution and a temporal resolution beyond video rate. In this work, we analyze an OCT-based prototypical tracking system which processes 831 volumes per second, estimates translational motion, and automatically adjusts the field-of-view, which has a size of few millimeters, to follow a sample even along larger distances. The adjustment is realized by two galvo mirrors and a motorized reference arm, such that no mechanical movement of the scanning setup is necessary. Without requiring a marker or any other knowledge about the sample, we demonstrate that reliable tracking of velocities up to 25 mm/s is possible with mean tracking errors in the order of 0.25 mm. Further, we report successful tracking of lateral velocities up to 70 mm/s with errors below 0.3 mm.

eess.IV↗