arXiv subjects
Publications and source records attributed to Maximilian Schlosshauer.
We compare the performance of protective quantum measurements to that of standard projective measurements. Performance is quantified in terms of the uncertainty in the measured expectation value. We derive an expression for the relative performance of these two types of quantum measurements and show explicitly that protective measurements can provide a significant performance advantage over standard projective measurements.
We experimentally demonstrate protective measurements by weakly coupling the polarization of a single-photon-level field to a measurement pointer that corresponds to the arrival time of the photon. By using an optical loop, we implement a variable, controlled number (1-9) of protection and measurement stages. We demonstrate the measurement of expectation values of photon polarization by measuring arrival times while simultaneously protecting the polarization state. No knowledge of the initial photon state is required or available in our experiment, demonstrating that protective measurements provide a genuine information gain that cannot simply be reduced to a priori information about the protection procedure.
I offer a few selected reflections on the decoherence program, with an emphasis on Zeh's role and views. First, I discuss Zeh's commitment to a realistic interpretation of the quantum state, which he saw as necessary for a consistent understanding of the decoherence process. I suggest that this commitment has been more fundamental than, and prior to, his support of an Everett-style interpretation of quantum mechanics. Seen through this lens, both his defense of Everett and the genesis of his ideas on decoherence emerge as consequences of his realistic view of the quantum state. Second, I give an overview of experiments on decoherence and describe, using the study of collisional decoherence as an example, the close interplay between experimental advances and theoretical modeling in decoherence research.
Ideal quantum random number generators (QRNGs) can produce algorithmically random and thus incomputable sequences, in contrast to pseudo-random number generators. However, the verification of the presence of algorithmic randomness and incomputability is a nontrivial task. We present the results of a search for algorithmic randomness and incomputability in the output from two different QRNGs, performed by applying tests based on the Solovay-Strassen test of primality and the Chaitin-Schwartz theorem. The first QRNG uses measurements of quantum vacuum fluctuations. The second QRNG is based on polarization measurements on entangled single photons; for this generator, we use looped (and thus highly compressible) strings that also allow us to assess the ability of the tests to detect repeated bit patterns. Compared to a previous search for algorithmic randomness, our study increases statistical power by almost 3 orders of magnitude.
We describe the generation of sequences of random bits from the parity of photon counts produced by polarization measurements on a polarization-entangled state. The resulting sequences are bias free, pass the applicable tests in the NIST battery of statistical randomness tests, and are shown to be Borel normal, without the need for experimental calibration stages or postprocessing of the output. Because the photon counts are produced in the course of a measurement of the violation of the Clauser-Horne-Shimony-Holt inequality, we are able to concurrently verify the nonclassical nature of the photon statistics and estimate a lower bound on the min-entropy of the bit-generating source. The rate of bit production in our experiment is around 13 bits/s.
We study the protective measurement of a qubit by a second qubit acting as a probe. Consideration of this model is motivated by the possibility of its experimental implementation in multiqubit systems such as trapped ions. In our scheme, information about the expectation value of an arbitrary observable of the system qubit is encoded in the rotation of the state of the probe qubit. We describe the structure of the Hamiltonian that gives rise to this measurement and analyze the resulting dynamics under a variety of realistic conditions, such as noninfinitesimal measurement strengths, repeated measurements, non-negligible intrinsic dynamics of the probe, and interactions of the system and probe qubits with an environment. We propose an experimental realization of our model in an ion trap. The experiment may be performed with existing technology and makes use of established experimental methods for the engineering and control of Hamiltonians for quantum gates and quantum simulations of spin systems.
Randomness is a valuable resource in science, cryptography, engineering, and information technology. Quantum-mechanical sources of randomness are attractive because of the indeterminism of individual quantum processes. Here we consider the production of random bits from polarization measurements on photons. We first present a pedagogical discussion of how the quantum randomness inherent in such measurements is connected to quantum coherence, and how it can be quantified in terms of the quantum state and an associated entropy value known as min-entropy. We then explore these concepts by performing a series of single-photon experiments that are suitable for the undergraduate laboratory. We prepare photons in different nonentangled and entangled states, and measure these states tomographically. We use the information about the quantum state to determine, in terms of the min-entropy, the minimum amount of randomness produced from a given photon state by different bit-generating measurements. This is helpful in assessing the presence of quantum randomness and in ensuring the quality and security of the random-bit source.
We study protective quantum measurements in the presence of an environment and decoherence. We consider the model of a protectively measured qubit that also interacts with a spin environment during the measurement. We investigate how the coupling to the environment affects the two characteristic properties of a protective measurement, namely, (i) the ability to leave the state of the system approximately unchanged and (ii) the transfer of information about expectation values to the apparatus pointer. We find that even when the interaction with the environment is weak enough not to lead to appreciable decoherence of the initial qubit state, it causes a significant broadening of the probability distribution for the position of the apparatus pointer at the conclusion of the measurement. This washing out of the pointer position crucially diminishes the accuracy with which the desired expectation values can be measured from a readout of the pointer. We additionally show that even when the coupling to the environment is chosen such that the state of the system is immune to decoherence, the environment may still detrimentally affect the pointer readout.
I give a pedagogical overview of decoherence and its role in providing a dynamical account of the quantum-to-classical transition. The formalism and concepts of decoherence theory are reviewed, followed by a survey of master equations and decoherence models. I also discuss methods for mitigating decoherence in quantum information processing and describe selected experimental investigations of decoherence processes.
Quantum decoherence plays a pivotal role in the dynamical description of the quantum-to-classical transition and is the main impediment to the realization of devices for quantum information processing. This paper gives an overview of the theory and experimental observation of the decoherence mechanism. We introduce the essential concepts and the mathematical formalism of decoherence, focusing on the picture of the decoherence process as a continuous monitoring of a quantum system by its environment. We review several classes of decoherence models and discuss the description of the decoherence dynamics in terms of master equations. We survey methods for avoiding and mitigating decoherence and give an overview of several experiments that have studied decoherence processes. We also comment on the role decoherence may play in interpretations of quantum mechanics and in addressing foundational questions.
This paper presents a proof-of-principle scheme for the protective measurement of a single photon. In this scheme, the photon is looped arbitrarily many times through an optical stage that implements a weak measurement of a polarization observable followed by a strong measurement protecting the state. The ability of this scheme to realize a large number of such interaction-protection steps means that the uncertainty in the measurement result can be drastically reduced while maintaining a sufficient probability for the photon to survive the measurement.
We report an experimental realization of the quantum paradox of the separation of a single photon from one of its properties (the so-called "quantum Cheshire cat"). We use a modified Sagnac interferometer with displaced paths to produce appropriately pre- and postselected states of heralded single photons. Weak measurements of photon presence and circular polarization are performed in each arm of the interferometer by introducing weak absorbers and small polarization rotations and analyzing changes in the postselected signal. The absorber is found to have an appreciable effect only in one arm of the interferometer, while the polarization rotation significantly affects the signal only when performed in the other arm. We carry out both sequential and simultaneous weak measurements and find good agreement between measured and predicted weak values. In the language of Aharonov et al. and in the sense of the ensemble averages described by weak values, the experiment establishes the separation of a particle from one its properties during the passage through the interferometer.
Conventionally, unknown quantum states are characterized using quantum-state tomography based on strong or weak measurements carried out on an ensemble of identically prepared systems. By contrast, the use of protective measurements offers the possibility of determining quantum states from a series of weak, long measurements performed on a single system. Because the fidelity of a protectively measured quantum state is determined by the amount of state disturbance incurred during each protective measurement, it is crucial that the initial quantum state of the system is disturbed as little as possible. Here we show how to systematically minimize the state disturbance in the course of a protective measurement, thus enabling the maximization of the fidelity of the quantum-state measurement. Our approach is based on a careful tuning of the time dependence of the measurement interaction and is shown to be dramatically more effective in reducing the state disturbance than the previously considered strategy of weakening the measurement strength and increasing the measurement time. We describe a method for designing the measurement interaction such that the state disturbance exhibits polynomial decay to arbitrary order in the inverse measurement time $1/T$. We also show how one can achieve even faster, subexponential decay, and we find that it represents the smallest possible state disturbance in a protective measurement. In this way, our results show how to optimally measure the state of a single quantum system using protective measurements.
In a delayed-choice quantum eraser, interference fringes are obtained by erasing which-way information after the interfering particle has already been irreversibly detected. Following an introductory review of delayed-choice experiments and quantum erasure, we describe the experimental realization of an optical delayed-choice quantum eraser, suitable for advanced undergraduates, based on polarization-entangled pairs of single photons. In our experiment, the delay of the erasure is implemented using two different setups. The first setup employs an arrangement of mirrors to increase the optical path length of the photons carrying which-way information. In the second setup, we use fiber-optic cables to elongate the path of these photons after their passage through the polarization analyzer but prior to their arrival at the detector. We compare our results to data obtained in the absence of a delay and find excellent agreement. This shows that the timing of the erasure is irrelevant, as also predicted by quantum mechanics. The experiment can serve as a valuable pedagogical tool for conveying the fundamentals of quantum mechanics.
A distinguishing feature of protective measurement is the possibility of obtaining information about expectation values while making the disturbance of the initial state arbitrarily small. Quantifying this state disturbance is of paramount importance. Here we derive exact and perturbative expressions for the state disturbance and the faithfulness of the measurement outcome in a model describing a spin-1/2 particle protectively measured by an inhomogeneous magnetic field. We determine constraints on the experimentally required field strengths from bounds imposed on the allowable state disturbance. We also demonstrate that the protective measurement may produce an incorrect result even when the particle's spin state is unaffected by the measurement, and show that successive measurements using multiple magnetic fields produce the same state disturbance as a single measurement involving a superposition of these fields. Our results supply comprehensive understanding of a paradigmatic model for protective measurement, may aid the experimental implementation of the measurement scheme, and illustrate fundamental properties of protective measurements.
This document is the second installment of three in the Cerro Grande Fire Series. Like its predecessor arXiv:quant-ph/0105039, "Notes on a Paulian Idea," it is a collection of letters written to various friends and colleagues, most of whom regularly circuit this archive. The unifying theme of all the letters is that each has something to do with the quantum. Particularly, the collection chronicles the emergence of Quantum Bayesianism as a robust view of quantum theory, eventually evolving into the still-more-radical "QBism" (with the B standing for no particular designation anymore), as it took its most distinctive turn away from various Copenhagen Interpretations. Included are many anecdotes from the history of quantum information theory: for instance, the story of the origin of the terms "qubit" and "quantum information" from their originator's own mouth, a copy of a rejection letter written by E. T. Jaynes for one of Rolf Landauer's original erasure-cost principle papers, and much more. Specialized indices are devoted to historical, technical, and philosophical matters. More roundly, the document is an attempt to provide an essential ingredient, unavailable anywhere else, for turning QBism into a live option within the vast spectrum of quantum foundational thought.
Niels Bohr's doctrine of the primacy of "classical concepts" is arguably his most criticized and misunderstood view. We present a new, careful historical analysis that makes clear that Bohr's doctrine was primarily an epistemological thesis, derived from his understanding of the functional role of experiment. A hitherto largely overlooked disagreement between Bohr and Heisenberg about the movability of the "cut" between measuring apparatus and observed quantum system supports the view that, for Bohr, such a cut did not originate in dynamical (ontological) considerations, but rather in functional (epistemological) considerations. As such, both the motivation and the target of Bohr's doctrine of classical concepts are of a fundamentally different nature than what is understood as the dynamical problem of the quantum-to-classical transition. Our analysis suggests that, contrary to claims often found in the literature, Bohr's doctrine is not, and cannot be, at odds with proposed solutions to the dynamical problem of the quantum-classical transition that were pursued by several of Bohr's followers and culminated in the development of decoherence theory.
We investigate the disturbance of the state of a quantum system in a protective measurement for finite measurement times and different choices of the time-dependent system-apparatus coupling function. The ability to minimize this state disturbance is essential to protective measurement. We show that for a coupling strength that remains constant during the measurement interaction of duration $T$, the state disturbance scales as $T^{-2}$, while a simple smoothing of the coupling function significantly improves the scaling behavior to $T^{-6}$. We also prove that the shift of the apparatus pointer in the course of a protective measurement is independent of the particular time dependence of the coupling function, suggesting that the guiding principle for choosing the coupling function should be the minimization of the state disturbance. Our results illuminate the dynamics of protective measurement under realistic circumstances and may aid in the experimental realization of such measurements.