arXiv subjects

Maximum Wilder-Smith

Publications and source records attributed to Maximum Wilder-Smith.

6 recordsLinked to original sources

arXiv2026

VR-DAgger: Immersive VR for Dexterous Data Collection and Uncertainty-Guided On-Policy Correction

Learning from demonstrations is effective for robotic manipulation, but collecting sufficient task-specific data remains a major bottleneck. Under distribution shift, small errors compound, performance degrades, and expert time is often spent on redundant, low-value corrections instead of the few critical failure cases. We present VR-DAgger, a human-in-the-loop framework centered on an immersive VR application for dexterous teleoperation, demonstration collection, and selective policy correction. The VR client provides intuitive hand control with synchronized scene visualization, while a backend workstation runs simulation and learning, enabling autonomous rollouts without continuous operator oversight. We use Monte Carlo (MC) dropout to score uncertainty during Isaac Lab rollouts of a diffusion policy and select informative failure segments for correction. These segments are replayed in VR as clips, where the operator selectively labels and corrects the policy's behavior, concentrating supervision where uncertainty is highest without full-rollout monitoring or a separate intervention classifier. We evaluate on three dexterous manipulation tasks (Pan pick-and-place, Drawer opening, Valve turning) with a 10-DoF XHand under standard and challenging initial configurations. Active labeling consistently improves over behavioral cloning across all tasks, with gains of up to 23 percentage points. Compared to unguided human-in-the-loop inspection, VR-DAgger reduces per-sample collection time by approximately 40% by focusing review on selected segments rather than full rollouts.

cs.RO↗

arXiv2026

ViserDex: Visual Sim-to-Real for Robust Dexterous In-hand Reorientation

In-hand object reorientation requires precise estimation of the object pose to handle complex task dynamics. While RGB sensing offers rich semantic cues for pose tracking, existing solutions rely on multi-camera setups or costly ray tracing. We present a sim-to-real framework for monocular RGB in-hand reorientation that integrates 3D Gaussian Splatting (3DGS) to bridge the visual sim-to-real gap. Our key insight is performing domain randomization in the Gaussian representation space: by applying physically consistent, pre-rendering augmentations to 3D Gaussians, we generate photorealistic, randomized visual data for object pose estimation. The manipulation policy is trained using curriculum-based reinforcement learning with teacher-student distillation, enabling efficient learning of complex behaviors. Importantly, both perception and control models can be trained independently on consumer-grade hardware, eliminating the need for large compute clusters. Experiments show that the pose estimator trained with 3DGS data outperforms those trained using conventional rendering data in challenging visual environments. We validate the system on a physical multi-fingered hand equipped with an RGB camera, demonstrating robust reorientation of five diverse objects even under challenging lighting conditions. Our results highlight Gaussian splatting as a practical path for RGB-only dexterous manipulation. For videos of the hardware deployments and additional supplementary materials, please refer to the project website: https://rffr.leggedrobotics.com/works/viserdex/

cs.RO↗

arXiv2026

MOSAIC-GS: Monocular Scene Reconstruction via Advanced Initialization for Complex Dynamic Environments

We present MOSAIC-GS, a novel, fully explicit, and computationally efficient approach for high-fidelity dynamic scene reconstruction from monocular videos using Gaussian Splatting. Monocular reconstruction is inherently ill-posed due to the lack of sufficient multiview constraints, making accurate recovery of object geometry and temporal coherence particularly challenging. To address this, we leverage multiple geometric cues, such as depth, optical flow, dynamic object segmentation, and point tracking. Combined with rigidity-based motion constraints, these cues allow us to estimate preliminary 3D scene dynamics during an initialization stage. Recovering scene dynamics prior to the photometric optimization reduces reliance on motion inference from visual appearance alone, which is often ambiguous in monocular settings. To enable compact representations, fast training, and real-time rendering while supporting non-rigid deformations, the scene is decomposed into static and dynamic components. Each Gaussian in the dynamic part of the scene is assigned a trajectory represented as time-dependent Poly-Fourier curve for parameter-efficient motion encoding. We demonstrate that MOSAIC-GS achieves substantially faster optimization and rendering compared to existing methods, while maintaining reconstruction quality on par with state-of-the-art approaches across standard monocular dynamic scene benchmarks.

cs.CV↗

arXiv2025

DiskChunGS: Large-Scale 3D Gaussian SLAM Through Chunk-Based Memory Management

Recent advances in 3D Gaussian Splatting (3DGS) have demonstrated impressive results for novel view synthesis with real-time rendering capabilities. However, integrating 3DGS with SLAM systems faces a fundamental scalability limitation: methods are constrained by GPU memory capacity, restricting reconstruction to small-scale environments. We present DiskChunGS, a scalable 3DGS SLAM system that overcomes this bottleneck through an out-of-core approach that partitions scenes into spatial chunks and maintains only active regions in GPU memory while storing inactive areas on disk. Our architecture integrates seamlessly with existing SLAM frameworks for pose estimation and loop closure, enabling globally consistent reconstruction at scale. We validate DiskChunGS on indoor scenes (Replica, TUM-RGBD), urban driving scenarios (KITTI), and resource-constrained Nvidia Jetson platforms. Our method uniquely completes all 11 KITTI sequences without memory failures while achieving superior visual quality, demonstrating that algorithmic innovation can overcome the memory constraints that have limited previous 3DGS SLAM methods.

cs.RO↗

arXiv2025

FOCI: Trajectory Optimization on Gaussian Splats

3D Gaussian Splatting (3DGS) has recently gained popularity as a faster alternative to Neural Radiance Fields (NeRFs) in 3D reconstruction and view synthesis methods. Leveraging the spatial information encoded in 3DGS, this work proposes FOCI (Field Overlap Collision Integral), an algorithm that is able to optimize trajectories directly on the Gaussians themselves. FOCI leverages a novel and interpretable collision formulation for 3DGS using the notion of the overlap integral between Gaussians. Contrary to other approaches, which represent the robot with conservative bounding boxes that underestimate the traversability of the environment, we propose to represent the environment and the robot as Gaussian Splats. This not only has desirable computational properties, but also allows for orientation-aware planning, allowing the robot to pass through very tight and narrow spaces. We extensively test our algorithm in both synthetic and real Gaussian Splats, showcasing that collision-free trajectories for the ANYmal legged robot that can be computed in a few seconds, even with hundreds of thousands of Gaussians making up the environment. The project page and code are available at https://rffr.leggedrobotics.com/works/foci/

cs.RO↗

arXiv2024

Radiance Fields for Robotic Teleoperation

Radiance field methods such as Neural Radiance Fields (NeRFs) or 3D Gaussian Splatting (3DGS), have revolutionized graphics and novel view synthesis. Their ability to synthesize new viewpoints with photo-realistic quality, as well as capture complex volumetric and specular scenes, makes them an ideal visualization for robotic teleoperation setups. Direct camera teleoperation provides high-fidelity operation at the cost of maneuverability, while reconstruction-based approaches offer controllable scenes with lower fidelity. With this in mind, we propose replacing the traditional reconstruction-visualization components of the robotic teleoperation pipeline with online Radiance Fields, offering highly maneuverable scenes with photorealistic quality. As such, there are three main contributions to state of the art: (1) online training of Radiance Fields using live data from multiple cameras, (2) support for a variety of radiance methods including NeRF and 3DGS, (3) visualization suite for these methods including a virtual reality scene. To enable seamless integration with existing setups, these components were tested with multiple robots in multiple configurations and were displayed using traditional tools as well as the VR headset. The results across methods and robots were compared quantitatively to a baseline of mesh reconstruction, and a user study was conducted to compare the different visualization methods. For videos and code, check out https://rffr.leggedrobotics.com/works/teleoperation/.

cs.RO↗