arXiv subjects

Maxwell A. Millar-Blanchaer

Publications and source records attributed to Maxwell A. Millar-Blanchaer.

At least 19 recordsLinked to original sources

arXiv2026

A Misaligned Debris Disk relative to the Host Star CPD-72 2713 from JWST/NIRCam Imaging

Observations of debris disks provide a valuable window to investigate the formation and evolution of planetary systems. We present high-contrast JWST/NIRCam observations of CPD-72 2713, a 24 Myr-old star that belongs to the $β$ Pic moving group. We obtained the first scattered-light images of the disk in both F210M and F444W filters, revealing a nearly face-on orientation. Forward modeling yields disk radii of $\rm 55.4^{+3.0}_{-3.2}\,AU$ (F210M) and $\rm 39.1^{+4.6}_ {-2.6}\,AU$ (F444W), both significantly smaller than the thermal emission radii measured with ALMA and Herschel/PACS. This discrepancy suggests that scattered light traces the inner region of the disk while thermal emission probes the outer regions. Combining the stellar rotation period ($4.47\pm0.67$ days) from TESS light curves and spectroscopic $v\sin i_*$, we constrained the stellar inclination to $47^{\circ}.2^{+11.1}_{-7.7}$ ($1σ$). The minimum star-disk mutual inclinations are $27^{\circ}.6 _{-8.2} ^{+11.5}\ (1σ)$ from F210M data and $27^{\circ}.3 _{-10.9}^{ +12.5}\ (1σ)$ in F444W data. We find that the minimum star--disk mutual inclination exceeds $10^\circ$ at the $95\%$ credible level in both F210M and F444W, suggesting a misalignment between the scattered-light disk and the stellar equatorial plane. We note that variation among published disk inclination measurements and potential systematic uncertainties may affect this probability. With JWST high-contrast imaging, we rule out planets down to $0.3\ \rm M_{J}$ at $0.5^{\prime\prime}$ and beyond, disfavoring a planet as the driver of the star-disk misalignment.

astro-ph.EP↗

arXiv2026

The JWST Sub-Jupiters Survey: Direct Imaging Discovery of a Giant Planet and a Debris Disk Around the Young M-dwarf RX J0534.0-0221

We present the discovery of RX J0534.0-0221 b, a giant planet orbiting an M-dwarf star in the $β$ Pictoris moving group. RX J0534 was originally observed with JWST/NIRCam in the F444W and F200W filters. Observations in F444W reveal a point source at signal-to-noise ratio $\sim17.5$ at $\sim0.41$ arcsec ($\sim14$ au) from the host star, with no detection of the source in F200W. A follow-up observation with LBTI/LMIRCam in $L'$ band re-detects the source 16 months after the JWST epoch, providing evidence for common proper motion over a chance alignment with a background interloper at the $6-7σ$ level. Atmospheric grid model fits to the available photometry yield bolometric luminosity log$_{10}(L/L_\odot) = -5.48^{+0.10}_{-0.19}$ dex. At an age of $18-26$ Myr, hot-start evolutionary models predict $M=2.8^{+0.5}_{-0.5}$ M$_{\text{Jup}}$ and $T_{\text{eff}}=674^{+57}_{-49}$ K. From the $L'-F444W$ color and magnitudes we find evidence for disequilibrium chemistry or enhanced metallicity in the planet atmosphere. Additionally, an extended structure is detected in the JWST F200W observation, consistent with a resolved debris disk with peak density radius of $79^{+3}_{-3}$ au and an inclination of $56.5^{+1.5}_{-1.5}$ deg. RX J0534 b is one of the lowest-mass planets imaged to date. After TWA 7 b, it is the second imaged planet around an M-dwarf orbiting at Solar System scales (the first within 50 au), and the first to be confirmed via common proper motion. Future orbital monitoring and atmospheric characterization will shed light on its formation history, a particularly interesting question given the challenging nature of giant planet formation around M-dwarfs.

astro-ph.EP↗

arXiv2026

The Nancy Grace Roman Space Telescope Coronagraph Community Participation Program

In preparation for the operational phase of the Nancy Grace Roman Space Telescope, NASA has created the Coronagraph Community Participation Program (CPP) to prepare for and execute Coronagraph Instrument technology demonstration observations. The CPP is composed of 7 small, US-based teams, selected competitively via the Nancy Grace Roman Space Telescope Research and Support Participation Opportunity, members of the Roman Project Team, and international partner teams from ESA, JAXA, CNES, and the Max Planck Institute for Astronomy. The primary goals of the CPP are to prepare simulation tools, target databases, and data reduction software for the execution of the Coronagraph Instrument observation phase. Here, we present the current status of the CPP and its working groups, along with plans for future CPP activities up through Roman's launch. We also discuss plans to potentially enable future commissioning of currently-unsupported modes.

astro-ph.IM↗

arXiv2026

NIRC2-Pol: First Light of Near-Infrared Polarimetry on Keck II

NIRC2, the Near Infrared Camera 2 on the Keck II telescope, was recently upgraded with a new suite of polarimetric observing modes. The new polarimetry modes (referred to as NIRC2-Pol) open up a wide range of new studies, including investigations of exoplanets, the Galactic center, active galactic nuclei, and solar system objects. The new modes enabled by the upgrade span the 1.1 to 4.1 micron range (i.e. J through L' bands) and include imaging polarimetry, coronagraphic imaging polarimetry, and spectropolarimetry. NIRC2-Pol is unique, as Keck II is the largest telescope (10 m) on which AO-fed infrared polarimetry capabilities are available, one of few with L' polarimetric imaging, and the only one where there is both a polarimetric mode and a vortex coronagraph. Here, we introduce the design of NIRC2-Pol, its capabilities, and its current operational status. We also present its first on-sky results: the first L' polarimetric images of the AB Aurigae circumstellar disk. These images more clearly reveal the disk's iconic spiral arms than previous L' total intensity imaging.

astro-ph.IM↗

arXiv2026

Demonstration of simultaneous PIAA- coronagraphy and wavefront sensing using a single metasurface-based focal-plane optic

Controlling residual wavefront aberrations downstream of an extreme adaptive optics (ExAO) system is a major challenge in high-contrast imaging. These aberrations produce quasi-static speckles due to differences between the wavefront-sensing and science paths. Highly sensitive wavefront sensors, such as Zernike wavefront sensors (ZWFSs), are used to mitigate these non-common path aberrations. High-performing coronagraphs, such as complex mask coronagraphs (CMCs), are also implemented in the focal plane. Both perform better with lossless apodization such as phase-induced amplitude apodization (PIAA) optics. Metasurfaces can have chromatic responses, allowing a single focal-plane optic to have different functionalities in different wavelength bands. We demonstrate such an optic by manufacturing a hybrid metasurface designed to function as a CMC and a ZWFS in two intermediate-band filters in the H band, each with a fractional bandwidth of approximately 1\%. We show measured optical responses with phases of $\sim π/2$ at shorter wavelengths and $π$ at longer wavelengths between $1500$ and $1700,\text{nm}$. This would allow for wavefront sensing at the shorter wavelength of $\sim1500\,\text{nm}$ and coronagraphy at the longer wavelength of $\sim1700\,\text{nm}$. Additionally, we tested the mask on-sky with the MagAO-X instrument at the Magellan Clay 6.5 m telescope at Las Campanas Observatory, Chile. On-sky results show a contrast of $\sim 10^{-1}$ at a non-ideal wavelength of $\sim 1600\,\text{nm}$. This is comparable to simulated contrast curves using the measured optical responses around that wavelength. Finally, we evaluated the wavefront-sensing performance of the metasurface using the MagAO-X internal source at $1300\,\mathrm{nm}$. The measured reconstruction error is consistent with simulations of an ideal Zernike wavefront sensor, confirming its wavefront-sensing functionality.

astro-ph.IM↗

arXiv2026

The Roman Coronagraph Community Participation Program: early calibration plan and pilot observation of a companion

Roman is set to launch in weeks! The Coronagraph Instrument - technology pathfinder for future direct imaging missions - is ready to fly too. According to predictions, laboratory tests and high fidelity simulations, it will open a new contrast regime enabling the imaging of mature, giant planets in visible reflected light. The Community Participation Program is responsible for preparing a comprehensive observing program with associated data processing software and calibrations. We give a brief update about the on-going "baseline" calibration plan for the first months. Additionally, we describe a pilot program aiming for the stellar companion HD 29992 B at moderate ~1e-5 to ~1e-6 Band 1 (575 nm) contrast, to be carried out as soon as the instrument is operational. The idea is to generate a canonical data set with a self luminous companion that is easily recoverable. This functional checkout will be precious to best prepare our community, exercise our calibration plan and suite of tools.

astro-ph.IM↗

arXiv2026

The Roman Coronagraph Community Participation Program: calibration strategy for the Mueller matrix using on-sky sources

The Nancy Grace Roman Space Telescope Coronagraph Instrument will provide space-based polarimetric observations of circumstellar disks and exoplanetary systems. Accurate reconstruction of the linear polarization fraction requires calibration of the instrumental Mueller matrix using polarized and weakly polarized standard stars. We constructed a candidate catalog by combining published optical polarimetry with Gaia DR3 astrometry and photometry and selected separate samples for coronagraphic calibration observations and observations using a neutral-density filter. Precursor $VRI$-band polarimetry of 18 faint candidates was obtained with HONIR on the 1.5-m Kanata telescope. The wavelength dependence of their normalized Stokes parameters was modeled using the Serkowski law to predict their polarization properties in \cgi\ Bands~1 and 4, and 2 sets of 3 calibrators were selected for the 2 calibration scenarios. We then estimated the achievable LPF reconstruction accuracy using Monte Carlo simulations that include uncertainties in the calibrator polarization properties, photometric noise, and residual detector-response errors. A dithered observing configuration was also simulated to reduce differential detector-response errors among the calibrators. The current estimates indicate LPF reconstruction errors at the few-percentage-point level, with a small bias arising from treating a weakly polarized calibrator as unpolarized. Finally, we present progress toward an end-to-end test using \texttt{corgisim} and \texttt{corgiDRP}, including successful processing of simulated datasets from Level~1 through Level~2b.

astro-ph.IM↗

arXiv2026

The Roman Coronagraph Community Participation Program: data reduction pipeline design and implementation

The Roman Space Telescope Coronagraph Instrument will demonstrate a series of technologies and techniques to enable the direct detection of reflected-light planets with space-based observatories. To characterize and validate the performance of the Coronagraph Instrument, the Community Participation Program is developing corgidrp, an open-source Python-based data reduction pipeline. The pipeline can process data from the required and best-effort observing modes and their associated calibration sequences into calibrated science-ready data products. We present the software design and implementation of corgidrp and the motivation behind specific design decisions. We describe the software architecture, data flow, processing steps, automation tools, testing framework, and development philosophy. We also outline future development plans in preparation for on-sky data.

astro-ph.IM↗

arXiv2026

The Roman Coronagraph Community Participation Program: pre-launch reference star list and impact of reference star properties on post-processing performance

The upcoming Roman Coronagraph will be the first high-contrast instrument in space capable of high-order wavefront sensing and control technologies, a critical technology demonstration for the proposed Habitable Worlds Observatory (HWO) that aims to directly image and characterize habitable exoEarths. The nominal Roman Coronagraph observing plan involves alternating observations of a science target and a bright, nearby reference star for both wavefront calibration and reference differential imaging post-processing. Reference star criteria for the most demanding coronagraph mode are restrictive, limiting the sample to only 40 candidates for which thorough observational vetting is needed to assess their suitability. Reference star properties such as resolved diameters, presence of circumstellar dust, and close point sources may also have more subtle impacts on post-processing efficacy that may inhibit final contrast performance. In this work, we describe the current progress of the CoronaGraph Instrument Reference stars for Exoplanets (CorGI-REx) observing campaign, a 300+-hour observing campaign that utilizes instruments from around the world to vet reference stars for high-order wavefront control suitability. We will present the pre-launch list of reference star candidates being utilized for the Roman Coronagraph Observation Phase constructed from a thorough analysis of high contrast and interferometric observations. We will also present the results of simulations investigating the impact of reference star resolved diameters and companions on post-processing performance. We conclude by discussing the importance of reference star selection for scheduling observations and optimizing contrast performance for the Roman Coronagraph along with implications for HWO coronagraph operations.

astro-ph.IM↗

arXiv2026

The Roman Coronagraph Community Participation Program: Observation planning and data reduction for polarimetric mode

Reflected-light polarimetry of exoplanets constrains and resolves degeneracies in atmospheric properties, while polarized light observations of debris disks enable the characterization of dust-grain properties. The best-effort polarimetric mode of the Roman Coronagraph Instrument will be able to perform multi-wavelength observations of planetary systems using both the Hybrid Lyot Coronagraph (HLC) and the Shaped Pupil Coronagraph (SPC). This paper presents an overview of observation planning, simulations, and data reduction procedures for the polarimetric mode of the Roman Coronagraph. As an initial test of simulation and data reduction, a dataset of polarimetric observing sequences for the debris disk HD 172555 in HLC mode was generated using corgisim with estimated observation parameters, and data reduction was performed using corgidrp, incorporating all relevant noise factors and calibration products. Currently, mock calibration products are used in corgidrp; these will be replaced with simulated calibration products in future updates

astro-ph.IM↗

arXiv2026

Enabling Quantitative Polarimetry for Keck/NIRC2: Preliminary Mueller Matrix Model Calibration

The Keck/NIRC2 infrared imager was upgraded in 2025 with dual-beam polarimetric observing modes spanning approximately 1.1--4.1 microns (JHKL' bands). We present a preliminary JHK calibration of NIRC2 Polarimetry using a wavelength-dependent Mueller matrix model of the Keck tertiary mirror (M3), half-wave plate (HWP), image rotator (IMR), downstream optics, and Wollaston prism. We constrain the model downstream of M3 using dome flat sequences spanning ten HWP and nine IMR angles in each band. Although the model reproduces the dominant modulation, the residuals show structure dependent on HWP and IMR angle. Measurement matrix inversion of unpolarized standard star observations gives M3 diattenuations of 0.0119+/-0.0009, 0.0098+/-0.0004, and 0.0068+/-0.0005 in J, H, and Kp, substantially closer to Fresnel predictions for aluminum than the values derived from dome flats. The larger dome flat modulation may indicate polarization in the incident dome illumination or Mueller matrix model inaccuracies. These results establish an initial calibration framework while motivating improved input polarization constraints, fixed HWP parameters from previous laboratory measurements, model validation with polarized standard stars, and extension to L'.

astro-ph.IM↗

arXiv2026

An open-source data processing pipeline for Keck / NIRC2-Polarimetry

The Keck/NIRC2 infrared imager was recently upgraded with a new suite of polarimetric observing modes. This polarimetry upgrade (referred to as NIRC2-Pol) will open up a wide range of new astronomical studies, including investigations of exoplanets, the Galactic center, active galactic nuclei and the solar system. Astronomical polarimeters require sophisticated data reduction, especially for quantitative polarimetry requiring the use of a Mueller Matrix model for instrumental polarization calibration. This work presents the design of a flexible, user-friendly, open-source data processing pipeline intended for use with NIRC2-Pol, summarizing its key steps and details of its ongoing implementation.

astro-ph.IM↗

arXiv2026

Updating the SCExAO/CHARIS polarimetric calibration following the Nasmyth beam-switcher upgrade

Subaru/SCExAO/CHARIS enables near-infrared integral field spectropolarimetry. Quantitative polarimetry is useful for a variety of science cases, particularly measurements related to dust grain properties in circumstellar disks. This capability requires correcting for polarization effects from the optical path via a Mueller matrix model. We present an updated model accounting for the recently installed SCExAO near-infrared wavefront sensor YJH50 dichroic beamsplitter and the major Subaru Nasmyth beam-switcher upgrade. Using internal light source measurements from before and after the beam switcher installation, we find an elliptical retarder model for the image derotator improves polarimetric accuracy over the previous linear retarder model. We additionally find the YJH50 dichroic produces faint polarization effects that we cannot characterize with our Mueller matrix modeling capabilities, and that the Nasmyth beam-switcher has minimal polarization effects other than inducing a sign flip in Q and V polarized light. Using unpolarized standard star calibration measurements, we fit the diattenuation of Subaru's tertiary mirror as a function of wavelength and find that the diattenuation has increased since the previous CHARIS calibration. We calculate that the polarimetric accuracy of the model in the degree of linear polarization ranges from 0.02% to 0.12% for a 1% polarized target. This model update will soon be incorporated into CHARIS's data processing pipeline, and should be used for any polarimetric data taken after the Nasmyth beam-switcher update in October 2025. Additionally, we provide the code for this calibration as part of an open-source Python package for polarimetric calibration called pyPolCal, enabling straightforward re-calibration of the system after any future changes, e.g. the recent recoating of M3.

astro-ph.IM↗

arXiv2026

Visible-Light High-Contrast Polarimetry with MagAO-X: Characterization and Initial Results

MagAO-X is a visible-light extreme adaptive optics instrument on the 6.5 meter Magellan Clay Telescope, recently upgraded to enable high-contrast polarimetric differential imaging (PDI) in r', i', and z' filters. Polarimetry is a powerful technique for suppressing unpolarized starlight and isolating the faint, polarized signal scattered by circumstellar dust, but it demands precise calibration of instrumental polarization effects introduced by the telescope and instrument optics. We present an overview of the MagAO-X polarimeter and characterize its polarimetric response using a purpose-built polarization generator that injects light of a known polarization state. From these measurements, we fit a Mueller-matrix model of the instrument and quantify its polarimetric efficiency and instrumental polarization as a function of the k-mirror image rotator angle and observing filter. The initial characterization revealed significant, dynamic inefficiencies driven by the image rotator, motivating the deployment of a dual rotating quarter-wave plate (DQWP) compensator that dynamically reorients the input polarization to the instrument's eigenpolarization. Following installation of the DQWP, we measured an average increase in polarimetric efficiency of +17.5% (to 87.4%) and a reduction in instrumental polarization of -5.4% (to 8.3%) across all filters. Finally, we demonstrate the on-sky performance of the polarimeter with i' imaging of the debris disk around HR 4796, producing one of the closest inner-working-angle views of the bright, forward-scattering side of the disk. These results help pave the way for polarimeters on future extremely large telescopes such as GMT and ELT.

astro-ph.IM↗

arXiv2026

The JWST Early Release Science Program for Direct Observations of Exoplanetary Systems VIII: patchy forsterite and enstatite clouds in the atmosphere of VHS 1256 b, retrieval lessons learned and outlook to the future

JWST defines a new era for the data-driven approach of retrieval modelling, which has become a cornerstone tool for the statistical inference of exoplanetary and brown dwarf properties. The Early Release Science program #1386 observations of VHS 1256 b represent a huge jump in data quality, data quantity and spectral coverage for such objects. VHS 1256 b is a young, planetary mass and extremely variable companion that populates the enigmatic L/T cohort of substellar atmospheres. In this first retrieval analysis of the full 1 - 18 micron dataset, we apply the Brewster retrieval framework to the NIRSpec and MIRI spectroscopic observations of VHS 1256 b, exploring a variety of cloud species and structures. Using Delta(BIC) we find that the data is best described by a forsterite (Mg$_{2}$SiO$_{4}$) and enstatite (MgSiO$_{3}$) cloud combination. Our analysis shows a strong preference for patchy silicate cloud coverage, which aligns with VHS 1256 b's extensive and well documented spectral variability. Our retrieval is able to place constraints on the abundances of H$_{2}$O, CO, CO$_{2}$, CH$_{4}$ as well as NH$_{3}$. We also show that the retrieved parameters are sensitive to the data used and the relative signal-to-noise ratios between data from different instruments. We conclude with the next steps for the wider retrieval community to better understand young and cloudy exoplanetary atmospheres.

astro-ph.EP↗

arXiv2026

GRaTer-JAX: An Accelerated Package for Debris Disk Modeling

GRaTer-JAX is a Python package for modeling debris disks, disks of dust around stars that pro- vide important clues about the formation, structure, and evolution of planetary systems. GRaTer (Generator of Ring-like, axisymmetric, optically Thin dust disks for regularized fitting) is a debris disk modeling framework originally developed for generating and fitting models of optically thin, ax- isymmetric dust disks. JAX is a Python package for high-performance computing that implements just-in-time compilation and auto-differentiation, enabling significant speedups in forward modeling workflows. GRaTer-JAX delivers a more powerful, efficient, and robust debris disk modeling framework than previous tools. Its JAX-based backend provides orders-of-magnitude speedups and analytic gradients, while its intuitive and extensible API unifies forward modeling, optimization, and inference within a single workflow. Combined with key additions to its disk model, it is capable of more advanced debris disk modeling, enabling research that was previously computationally impractical such as explorations of additional morphological parameters and disk composition via scattering phase functions.

astro-ph.EP↗

arXiv2026

Connecting Polarization to Exoplanet Yield Calculations for HWO

The Habitable Worlds Observatory (HWO) aims to enable the detection and characterization of Earth-like planets around Sun-like stars to search for possible signs of life elsewhere in our universe. This requires an incredibly sensitive coronagraph instrument that suppresses the light from the star by a factor of 10 billion, which must contend with error terms that have not previously limited high-contrast instrumentation at lower levels of starlight suppression. Polarization aberrations are one such source of error that is particularly problematic for coronagraphy on a large space telescope. Optical rays in large, compact astronomical observatories can have large changes in angle of incidence over the beam, which induce polarization aberrations that decrease sensitivities to faint signals at small angular separations. Limiting variation in angles of incidence along the optical path could lead to longer, less stable observatories. This could negatively impact the total number of exo-Earths HWO would be able to detect. This study links open-source physical optics modeling tools to an exoplanet yield optimizer to understand how polarization aberrations influence science return for HWO. We also explore how polarization aberrations scale with change in angle of incidence, which could drive the primary-secondary mirror distance and overall observatory stability. In the visible, we find that decreasing the EAC-1 barrel from 16m to 12m results in $\approx 10^{-10}$ contrast at the IWA where we expect exo-Earths to be. In the UV we appear to be less sensitive to polarization because exo-Earths are farther from the IWA. We also find a limited range over which the design reference mission of EAC-1 can be optimized to compensate for polarization aberrations using altruistic yield optimization. We then report on mitigation strategies to minimize the presence of polarization aberrations in HWO.

astro-ph.IM↗

arXiv2025

A second planetesimal collision in the Fomalhaut system

The nearby star Fomalhaut is orbited by a compact source, Fomalhaut b, which has previously been interpreted as either a dust-enshrouded exoplanet or a dust cloud generated by the collision of two planetesimals. Such collisions are rarely observed but their debris can appear in direct imaging. We report Hubble Space Telescope observations that show the appearance in 2023 of a second point source around Fomalhaut, resembling the appearance of Fomalhaut b twenty years earlier. We interpret this additional source as a dust cloud produced by a recent impact between two planetesimals. The positions and motion of two impact-generated dust clouds over twenty years provide constraints on the collisional dynamics in the debris belt.

astro-ph.EP↗