Searcharxiv⌕ Search

arXiv subjects

Maya Mekel

Publications and source records attributed to Maya Mekel.

2 recordsLinked to original sources

Power Scaling Across Link Utilization with GPAM-4 Signaling and Event-Driven Reception

This work highlights the potential of combining event-based signaling with event-driven reception to achieve receiver power scaling across link utilization, without requiring wake-up, locking, or data-rate reconfiguration. The approach is demonstrated using the proposed four-level Gaussian pulse-amplitude modulation (GPAM-4) scheme and a corresponding event-driven receiver. By employing a resettable ring voltage-controlled oscillator (RRVCO) as its front end, the receiver achieves inherently event-driven symbol measurement, initiated directly by each received pulse. Symbols are decoded directly from the final RRVCO phase state, eliminating a counter-based back end. Simulated in 28-nm CMOS, the receiver power is evaluated across a $100\times$ range of effective data rates---from 0.15 mW at the peak rate of 8 Gb/s, down to 2.5 $μ$W under active/idle operation and 1.6 $μ$W under data rate change at 80 Mb/s. The receiver thus achieves power reductions of $59.5\times$ and $90.0\times$, while its energy per bit increases by only $1.68\times$ and $1.11\times$, respectively.

cs.ET↗

Self-Calibrating Integrate-and-Fire Time Encoding Machine

In this paper, we introduce a novel self-calibrating integrate-and-fire time encoding machine (S-IF-TEM) that enables simultaneous parameter estimation and signal reconstruction during sampling, thereby effectively mitigating mismatch effects. The proposed framework is developed over a new practical IF-TEM (P-IF-TEM) setting, which extends classical models by incorporating device mismatches and imperfections that can otherwise lead to significant reconstruction errors. Unlike existing IF-TEM settings, P-IF-TEM accounts for scenarios where (i) system parameters are inaccurately known and may vary over time, (ii) the integrator discharge time after firings can vary, and (iii) the sampler may operate in its nonlinear region under large input dynamic ranges. For this practical model, we derive sampling rate bounds and reconstruction conditions that ensure perfect recovery. Analytical results establish the conditions for perfect reconstruction under self-calibration, and evaluation studies demonstrate substantial improvements - exceeding 59dB - highlighting the effectiveness of the proposed approach.

eess.SP↗