SearcharxivSearch

arXiv subjects

Md Abdullah-Al Kaiser

Publications and source records attributed to Md Abdullah-Al Kaiser.

At least 19 recordsLinked to original sources

Hardware-Aware Learned Representation Compression for Distributed In-Sensor Vision

In-sensor computing reduces the cost of transmitting high-resolution image data by performing early-stage processing near the sensor. However, the logic chip integrated with a CMOS image sensor (CIS) is tightly constrained in compute and memory, limiting conventional deep neural network partitioning. We present OASIS, a distributed in-sensor vision framework that uses a lightweight encoder to generate compact, task-relevant representations before off-chip transmission. The encoder is trained end-to-end using task, entropy, and reconstruction objectives, while the decoder is used only during training. OASIS supports two complementary deployment paths. The first applies 4-bit quantization and Huffman coding while preserving the spatial structure required by classification and dense-prediction tasks. The second uses Sobol-based hyperdimensional computing (HDC) to transform the encoder latent into a fixed-dimensional binary hypervector for associative-memory classification. For the SwinViT-based VWW model, mapping a $3\times3\times8$ latent to a 64-dimensional hypervector provides an additional $1.77\times$ communication reduction with less than one percentage point of accuracy loss relative to the 128-dimensional configuration, yielding an overall $18{,}816\times$ reduction compared with raw 8-bit image transmission. We implement the digital near-sensor pipeline on an AMD Xilinx Zynq UltraScale+ FPGA and characterize it using direct board-level power measurements and Vivado post-implementation analysis, together with circuit-simulated CIS models and a 7-nm ASIC projection. Across visual wake-word classification, hand tracking, and eye tracking, OASIS reduces total system energy by approximately $2\times$-$4.5\times$ while maintaining competitive accuracy, demonstrating a practical hardware-algorithm co-design path for communication-efficient in-sensor vision.

cs.LG

System-Level Performance Modeling of Photonic In-Memory Computing

Photonic in-memory computing is a high-speed, low-energy alternative to traditional transistor-based digital computing that utilizes high photonic operating frequencies and bandwidths. In this work, we develop a comprehensive system-level performance model for photonic in-memory computing, capturing the effects of key latency sources such as external memory access and opto-electronic conversion. We perform algorithm-to-hardware mapping across a range of workloads, including the Sod shock tube problem, Matricized Tensor Times Khatri-Rao Product (MTTKRP), and the Vlasov-Maxwell equation, to evaluate how the latencies impact real-world high-performance computing workloads. Our performance model shows that, while accounting for system overheads, a compact 1x256 bit single-wavelength photonic SRAM array, fabricated using the standard silicon photonics process by GlobalFoundries, sustains up to 1.5 TOPS, 0.9 TOPS, and 1.3 TOPS on the Sod shock tube problem, MTTKRP, and the Vlasov-Maxwell equation with an average energy efficiency of 2.5 TOPS/W.

cs.DC

A Mixed-Signal Photonic SRAM-based High-Speed Energy-Efficient Photonic Tensor Core with Novel Electro-Optic ADC

The rapid surge in data generated by Internet of Things (IoT), artificial intelligence (AI), and machine learning (ML) applications demands ultra-fast, scalable, and energy-efficient hardware, as traditional von Neumann architectures face significant latency and power challenges due to data transfer bottlenecks between memory and processing units. Furthermore, conventional electrical memory technologies are increasingly constrained by rising bitline and wordline capacitance, as well as the resistance of compact and long interconnects, as technology scales. In contrast, photonics-based in-memory computing systems offer substantial speed and energy improvements over traditional transistor-based systems, owing to their ultra-fast operating frequencies, low crosstalk, and high data bandwidth. Hence, we present a novel differential photonic SRAM (pSRAM) bitcell-augmented scalable mixed-signal multi-bit photonic tensor core, enabling high-speed, energy-efficient matrix multiplication operations using fabrication-friendly integrated photonic components. Additionally, we propose a novel 1-hot encoding electro-optic analog-to-digital converter (eoADC) architecture to convert the multiplication outputs into digital bitstreams, supporting processing in the electrical domain. Our designed photonic tensor core, utilizing GlobalFoundries' monolithic 45SPCLO technology node, achieves computation speeds of 4.10 tera-operations per second (TOPS) and a power efficiency of 3.02 TOPS/W.

physics.optics

X-pSRAM: A Photonic SRAM with Embedded XOR Logic for Ultra-Fast In-Memory Computing

Traditional von Neumann architectures suffer from fundamental bottlenecks due to continuous data movement between memory and processing units, a challenge that worsens with technology scaling as electrical interconnect delays become more significant. These limitations impede the performance and energy efficiency required for modern data-intensive applications. In contrast, photonic in-memory computing presents a promising alternative by harnessing the advantages of light, enabling ultra-fast data propagation without length-dependent impedance, thereby significantly reducing computational latency and energy consumption. This work proposes a novel differential photonic static random access memory (pSRAM) bitcell that facilitates electro-optic data storage while enabling ultra-fast in-memory Boolean XOR computation. By employing cross-coupled microring resonators and differential photodiodes, the XOR-augmented pSRAM (X-pSRAM) bitcell achieves at least 10 GHz read, write, and compute operations entirely in the optical domain. Additionally, wavelength-division multiplexing (WDM) enables n-bit XOR computation in a single-shot operation, supporting massively parallel processing and enhanced computational efficiency. Validated on GlobalFoundries' 45SPCLO node, the X-pSRAM consumed 13.2 fJ energy per bit for XOR computation, representing a significant advancement toward next-generation optical computing with applications in cryptography, hyperdimensional computing, and neural networks.

eess.SY

A Retina-Inspired Pathway to Real-Time Motion Prediction inside Image Sensors for Extreme-Edge Intelligence

The ability to predict motion in real time is fundamental to many maneuvering activities in animals, particularly those critical for survival, such as attack and escape responses. Given its significance, it is no surprise that motion prediction in animals begins in the retina. Similarly, autonomous systems utilizing computer vision could greatly benefit from the capability to predict motion in real time. Therefore, for computer vision applications, motion prediction should be integrated directly at the camera pixel level. Towards that end, we present a retina-inspired neuromorphic framework capable of performing real-time, energy-efficient MP directly within camera pixels. Our hardware-algorithm framework, implemented using GlobalFoundries 22nm FDSOI technology, integrates key retinal MP compute blocks, including a biphasic filter, spike adder, nonlinear circuit, and a 2D array for multi-directional motion prediction. Additionally, integrating the sensor and MP compute die using a 3D Cu-Cu hybrid bonding approach improves design compactness by minimizing area usage and simplifying routing complexity. Validated on real-world object stimuli, the model delivers efficient, low-latency MP for decision-making scenarios reliant on predictive visual computation, while consuming only 18.56 pJ/MP in our mixed-signal hardware implementation.

eess.IV

Design of Energy-Efficient Cross-coupled Differential Photonic-SRAM (pSRAM) Bitcell for High-Speed On-Chip Photonic Memory and Compute Systems

In this work, we propose a novel differential photonic static random access memory (pSRAM) bitcell design using fabrication-friendly photonic components. The proposed pSRAM overcomes the key limitations of traditional electrical SRAMs, which struggle with speed and power efficiency due to increasing bitline/wordline capacitance and interconnect resistance associated with long electrical wires as technology scales. By utilizing cross-coupled micro-ring resonators and differential photodiode structures, along with optical waveguides instead of traditional wordlines and bitlines, our pSRAM exhibits high-speed, and energy-efficient performance. The pSRAM bitcell demonstrates a read/write speed of 40 GHz, with a switching (static) energy consumption of approximately 0.6 pJ (0.03 pJ) per bit and a footprint of 330x290 um^2 using the GlobalFoundries 45SPCLO process node. These bitcells can be arranged into a 2D memory array, enabling large-scale, on-chip photonic memory subsystems ideal for high-speed memory, data processing and computing applications.

physics.optics

Predictive Performance of Photonic SRAM-based In-Memory Computing for Tensor Decomposition

Photonics-based in-memory computing systems have demonstrated a significant speedup over traditional transistor-based systems because of their ultra-fast operating frequencies and high data bandwidths. Photonic static random access memory (pSRAM) is a crucial component for achieving the objective of ultra-fast photonic in-memory computing systems. In this work, we model and evaluate the performance of a novel photonic SRAM array architecture in development. Additionally, we examine hyperspectral operation through wavelength division multiplexing (WDM) to enhance the throughput of the pSRAM array. We map Matricized Tensor Times Khatri-Rao Product (MTTKRP), a computational kernel commonly used in tensor decomposition, to the proposed pSRAM array architecture. We also develop a predictive performance model to estimate the sustained performance of different configurations of the pSRAM array. Using the predictive performance model, we demonstrate that the pSRAM array achieves 17 PetaOps while performing MTTKRP in a practical hardware configuration.

cs.DC

Retina-Inspired Object Motion Segmentation for Event-Cameras

Event-cameras have emerged as a revolutionary technology with a high temporal resolution that far surpasses standard active pixel cameras. This technology draws biological inspiration from photoreceptors and the initial retinal synapse. This research showcases the potential of additional retinal functionalities to extract visual features. We provide a domain-agnostic and efficient algorithm for ego-motion compensation based on Object Motion Sensitivity (OMS), one of the multiple features computed within the mammalian retina. We develop a method based on experimental neuroscience that translates OMS' biological circuitry to a low-overhead algorithm to suppress camera motion bypassing the need for deep networks and learning. Our system processes event data from dynamic scenes to perform pixel-wise object motion segmentation using a real and synthetic dataset. This paper introduces a bio-inspired computer vision method that dramatically reduces the number of parameters by $\text{10}^\text{3}$ to $\text{10}^\text{6}$ orders of magnitude compared to previous approaches. Our work paves the way for robust, high-speed, and low-bandwidth decision-making for in-sensor computations.

cs.CV

Hardware-Algorithm Re-engineering of Retinal Circuit for Intelligent Object Motion Segmentation

Recent advances in retinal neuroscience have fueled various hardware and algorithmic efforts to develop retina-inspired solutions for computer vision tasks. In this work, we focus on a fundamental visual feature within the mammalian retina, Object Motion Sensitivity (OMS). Using DVS data from EV-IMO dataset, we analyze the performance of an algorithmic implementation of OMS circuitry for motion segmentation in presence of ego-motion. This holistic analysis considers the underlying constraints arising from the hardware circuit implementation. We present novel CMOS circuits that implement OMS functionality inside image sensors, while providing run-time re-configurability for key algorithmic parameters. In-sensor technologies for dynamical environment adaptation are crucial for ensuring high system performance. Finally, we verify the functionality and re-configurability of the proposed CMOS circuit designs through Cadence simulations in 180nm technology. In summary, the presented work lays foundation for hardware-algorithm re-engineering of known biological circuits to suit application needs.

cs.NE

Voltage-Controlled Magnetic Tunnel Junction based ADC-less Global Shutter Processing-in-Pixel for Extreme-Edge Intelligence

The vast amount of data generated by camera sensors has prompted the exploration of energy-efficient processing solutions for deploying computer vision tasks on edge devices. Among the various approaches studied, processing-in-pixel integrates massively parallel analog computational capabilities at the extreme-edge, i.e., within the pixel array and exhibits enhanced energy and bandwidth efficiency by generating the output activations of the first neural network layer rather than the raw sensory data. In this article, we propose an energy and bandwidth efficient ADC-less processing-in-pixel architecture. This architecture implements an optimized binary activation neural network trained using Hoyer regularizer for high accuracy on complex vision tasks. In addition, we also introduce a global shutter burst memory read scheme utilizing fast and disturb-free read operation leveraging innovative use of nanoscale voltage-controlled magnetic tunnel junctions (VC-MTJs). Moreover, we develop an algorithmic framework incorporating device and circuit constraints (characteristic device switching behavior and circuit non-linearity) based on state-of-the-art fabricated VC-MTJ characteristics and extensive circuit simulations using commercial GlobalFoundries 22nm FDX technology. Finally, we evaluate the proposed system's performance on two complex datasets - CIFAR10 and ImageNet, showing improvements in front-end and communication energy efficiency by 8.2x and 8.5x respectively and reduction in bandwidth by 6x compared to traditional computer vision systems, without any significant drop in the test accuracy.

cs.AR

Energy-Efficient & Real-Time Computer Vision with Intelligent Skipping via Reconfigurable CMOS Image Sensors

Current video-based computer vision (CV) applications typically suffer from high energy consumption due to reading and processing all pixels in a frame, regardless of their significance. While previous works have attempted to reduce this energy by skipping input patches or pixels and using feedback from the end task to guide the skipping algorithm, the skipping is not performed during the sensor read phase. As a result, these methods can not optimize the front-end sensor energy. Moreover, they may not be suitable for real-time applications due to the long latency of modern CV networks that are deployed in the back-end. To address this challenge, this paper presents a custom-designed reconfigurable CMOS image sensor (CIS) system that improves energy efficiency by selectively skipping uneventful regions or rows within a frame during the sensor's readout phase, and the subsequent analog-to-digital conversion (ADC) phase. A novel masking algorithm intelligently directs the skipping process in real-time, optimizing both the front-end sensor and back-end neural networks for applications including autonomous driving and augmented/virtual reality (AR/VR). Our system can also operate in standard mode without skipping, depending on application needs. We evaluate our hardware-algorithm co-design framework on object detection based on BDD100K and ImageNetVID, and gaze estimation based on OpenEDS, achieving up to 53% reduction in front-end sensor energy while maintaining state-of-the-art (SOTA) accuracy.

cs.CV

Toward High Performance, Programmable Extreme-Edge Intelligence for Neuromorphic Vision Sensors utilizing Magnetic Domain Wall Motion-based MTJ

The desire to empower resource-limited edge devices with computer vision (CV) must overcome the high energy consumption of collecting and processing vast sensory data. To address the challenge, this work proposes an energy-efficient non-von-Neumann in-pixel processing solution for neuromorphic vision sensors employing emerging (X) magnetic domain wall magnetic tunnel junction (MDWMTJ) for the first time, in conjunction with CMOS-based neuromorphic pixels. Our hybrid CMOS+X approach performs in-situ massively parallel asynchronous analog convolution, exhibiting low power consumption and high accuracy across various CV applications by leveraging the non-volatility and programmability of the MDWMTJ. Moreover, our developed device-circuit-algorithm co-design framework captures device constraints (low tunnel-magnetoresistance, low dynamic range) and circuit constraints (non-linearity, process variation, area consideration) based on monte-carlo simulations and device parameters utilizing GF22nm FD-SOI technology. Our experimental results suggest we can achieve an average of 45.3% reduction in backend-processor energy, maintaining similar front-end energy compared to the state-of-the-art and high accuracy of 79.17% and 95.99% on the DVS-CIFAR10 and IBM DVS128-Gesture datasets, respectively.

cs.AR

Hardware-Algorithm Co-design Enabling Processing-in-Pixel-in-Memory (P2M) for Neuromorphic Vision Sensors

The high volume of data transmission between the edge sensor and the cloud processor leads to energy and throughput bottlenecks for resource-constrained edge devices focused on computer vision. Hence, researchers are investigating different approaches (e.g., near-sensor processing, in-sensor processing, in-pixel processing) by executing computations closer to the sensor to reduce the transmission bandwidth. Specifically, in-pixel processing for neuromorphic vision sensors (e.g., dynamic vision sensors (DVS)) involves incorporating asynchronous multiply-accumulate (MAC) operations within the pixel array, resulting in improved energy efficiency. In a CMOS implementation, low overhead energy-efficient analog MAC accumulates charges on a passive capacitor; however, the capacitor's limited charge retention time affects the algorithmic integration time choices, impacting the algorithmic accuracy, bandwidth, energy, and training efficiency. Consequently, this results in a design trade-off on the hardware aspect-creating a need for a low-leakage compute unit while maintaining the area and energy benefits. In this work, we present a holistic analysis of the hardware-algorithm co-design trade-off based on the limited integration time posed by the hardware and techniques to improve the leakage performance of the in-pixel analog MAC operations.

cs.AR

Object Motion Sensitivity: A Bio-inspired Solution to the Ego-motion Problem for Event-based Cameras

Neuromorphic (event-based) image sensors draw inspiration from the human-retina to create an electronic device that can process visual stimuli in a way that closely resembles its biological counterpart. These sensors process information significantly different than the traditional RGB sensors. Specifically, the sensory information generated by event-based image sensors are orders of magnitude sparser compared to that of RGB sensors. The first generation of neuromorphic image sensors, Dynamic Vision Sensor (DVS), are inspired by the computations confined to the photoreceptors and the first retinal synapse. In this work, we highlight the capability of the second generation of neuromorphic image sensors, Integrated Retinal Functionality in CMOS Image Sensors (IRIS), which aims to mimic full retinal computations from photoreceptors to output of the retina (retinal ganglion cells) for targeted feature-extraction. The feature of choice in this work is Object Motion Sensitivity (OMS) that is processed locally in the IRIS sensor. Our results show that OMS can accomplish standard computer vision tasks with similar efficiency to conventional RGB and DVS solutions but offers drastic bandwidth reduction. This cuts the wireless and computing power budgets and opens up vast opportunities in high-speed, robust, energy-efficient, and low-bandwidth real-time decision making.

cs.CV

Technology-Circuit-Algorithm Tri-Design for Processing-in-Pixel-in-Memory (P2M)

The massive amounts of data generated by camera sensors motivate data processing inside pixel arrays, i.e., at the extreme-edge. Several critical developments have fueled recent interest in the processing-in-pixel-in-memory paradigm for a wide range of visual machine intelligence tasks, including (1) advances in 3D integration technology to enable complex processing inside each pixel in a 3D integrated manner while maintaining pixel density, (2) analog processing circuit techniques for massively parallel low-energy in-pixel computations, and (3) algorithmic techniques to mitigate non-idealities associated with analog processing through hardware-aware training schemes. This article presents a comprehensive technology-circuit-algorithm landscape that connects technology capabilities, circuit design strategies, and algorithmic optimizations to power, performance, area, bandwidth reduction, and application-level accuracy metrics. We present our results using a comprehensive co-design framework incorporating hardware and algorithmic optimizations for various complex real-life visual intelligence tasks mapped onto our P2M paradigm.

eess.IV

A Context-Switching/Dual-Context ROM Augmented RAM using Standard 8T SRAM

The landscape of emerging applications has been continually widening, encompassing various data-intensive applications like artificial intelligence, machine learning, secure encryption, Internet-of-Things, etc. A sustainable approach toward creating dedicated hardware platforms that can cater to multiple applications often requires the underlying hardware to context-switch or support more than one context simultaneously. This paper presents a context-switching and dual-context memory based on the standard 8T SRAM bit-cell. Specifically, we exploit the availability of multi-VT transistors by selectively choosing the read-port transistors of the 8T SRAM cell to be either high-VT or low-VT. The 8T SRAM cell is thus augmented to store ROM data (represented as the VT of the transistors constituting the read-port) while simultaneously storing RAM data. Further, we propose specific sensing methodologies such that the memory array can support RAM-only or ROM-only mode (context-switching (CS) mode) or RAM and ROM mode simultaneously (dual-context (DC) mode). Extensive Monte-Carlo simulations have verified the robustness of our proposed ROM-augmented CS/DC memory on the Globalfoundries 22nm-FDX technology node.

eess.SY

Neuromorphic-P2M: Processing-in-Pixel-in-Memory Paradigm for Neuromorphic Image Sensors

Edge devices equipped with computer vision must deal with vast amounts of sensory data with limited computing resources. Hence, researchers have been exploring different energy-efficient solutions such as near-sensor processing, in-sensor processing, and in-pixel processing, bringing the computation closer to the sensor. In particular, in-pixel processing embeds the computation capabilities inside the pixel array and achieves high energy efficiency by generating low-level features instead of the raw data stream from CMOS image sensors. Many different in-pixel processing techniques and approaches have been demonstrated on conventional frame-based CMOS imagers, however, the processing-in-pixel approach for neuromorphic vision sensors has not been explored so far. In this work, we for the first time, propose an asynchronous non-von-Neumann analog processing-in-pixel paradigm to perform convolution operations by integrating in-situ multi-bit multi-channel convolution inside the pixel array performing analog multiply and accumulate (MAC) operations that consume significantly less energy than their digital MAC alternative. To make this approach viable, we incorporate the circuit's non-ideality, leakage, and process variations into a novel hardware-algorithm co-design framework that leverages extensive HSpice simulations of our proposed circuit using the GF22nm FD-SOI technology node. We verified our framework on state-of-the-art neuromorphic vision sensor datasets and show that our solution consumes ~2x lower backend-processor energy while maintaining almost similar front-end (sensor) energy on the IBM DVS128-Gesture dataset than the state-of-the-art while maintaining a high test accuracy of 88.36%.

eess.IV

In-Sensor & Neuromorphic Computing are all you need for Energy Efficient Computer Vision

Due to the high activation sparsity and use of accumulates (AC) instead of expensive multiply-and-accumulates (MAC), neuromorphic spiking neural networks (SNNs) have emerged as a promising low-power alternative to traditional DNNs for several computer vision (CV) applications. However, most existing SNNs require multiple time steps for acceptable inference accuracy, hindering real-time deployment and increasing spiking activity and, consequently, energy consumption. Recent works proposed direct encoding that directly feeds the analog pixel values in the first layer of the SNN in order to significantly reduce the number of time steps. Although the overhead for the first layer MACs with direct encoding is negligible for deep SNNs and the CV processing is efficient using SNNs, the data transfer between the image sensors and the downstream processing costs significant bandwidth and may dominate the total energy. To mitigate this concern, we propose an in-sensor computing hardware-software co-design framework for SNNs targeting image recognition tasks. Our approach reduces the bandwidth between sensing and processing by 12-96x and the resulting total energy by 2.32x compared to traditional CV processing, with a 3.8% reduction in accuracy on ImageNet.

cs.CV