arXiv subjects

Md. Ferdous Rahman

Publications and source records attributed to Md. Ferdous Rahman.

6 recordsLinked to original sources

arXiv2026

Performance Analysis of Double Perovskite-Based Solar Cells Using SCAPS-1D Simulation: A brief review

Lead-free double perovskites are among the rapidly developing next-generation solar cell technologies, providing the required low toxicity, stability, as well as high optoelectronic potential. So far, experimentally prepared lead-free perovskite solar cell devices are reported to have low power conversion efficiency (PCE) for practical application as compared to the lead-based perovskites. In recent years, numerical simulations have emerged as a cost-effective approach that plays a crucial role in expediting scientific research, can bridge the gap between experiment and theory, and provide predictive information regarding the preparation of solar cells and their PCEs without undergoing real-time experiments. The tools, such as 1D numerical simulation software SCAPS-1D, are now needed to test newer architectures and determine what exactly is holding them back. So far in the field of solar cell research, SCAPS-1D has been extensively used and looks like a powerful software due to its user-friendliness and simulation of results in a few seconds. The speed and ease of simulation make SCAPS-1D a very popular tool; as a result, it enables rapid optimization of a large number of photovoltaic devices and their performances without undergoing any experimental work, which can save time and money. However, one serious drawback is that the SCAPS-1D simulator works only for 1D configurations. It is ineffective in incorporating atomistic interactions and 3D effects. Hence, the efficacy of the SCAPS-1D simulator solely relies on the accuracy of the input parameters that the user provides, failing which may give wrong results and large deviations from accuracy.

cond-mat.mtrl-sci↗

arXiv2022

Combined DFT, SCAPS-1D, and wxAMPS frameworks for design optimization of efficient Cs2BiAgI6-based perovskite solar cells with different charge transport layers

In this study, combined DFT, SCAPS-1D, and wxAMPS frameworks are used to investigate the optimized designs of Cs2BiAgI6 double perovskite-based solar cells. The first-principle calculation is employed to investigate the structural stability, optical responses, and electronic contribution of the constituent elements in Cs2BiAgI6 absorber material, where SCAPS-1D and wxAMPS simulators are used to scrutinize different configurations of Cs2BiAgI6 solar cells. Here, PCBM, ZnO, TiO2, C60, IGZO, SnO2, WS2, and CeO2 are used as ETL, and Cu2O, CuSCN, CuSbS2, NiO, P3HT, PEDOT: PSS, Spiro-MeOTAD, CuI, CuO, V2O5, CBTS, CFTS are used as HTL, and Au is used as a back contact. About ninety-six combinations of Cs2BiAgI6-based solar cell structures are investigated, in which eight sets of solar cell structures are identified as the most efficient structures. Besides, holistic investigation on the effect of different factors such as the thickness of different layers, series and shunt resistances, temperature, capacitance, Mott-Schottky and generation-recombination rates, and J-V (current-voltage density) and QE (quantum efficiency) characteristics is performed. The results show CBTS as the best HTL for Cs2BiAgI6 with all eight ETLs used in this work, resulting in a power conversion efficiency (PCE) of 19.99%, 21.55%, 21.59%, 17.47%, 20.42%, 21.52%, 14.44%, 21.43% with PCBM, TiO2, ZnO, C60, IGZO, SnO2, CeO2, WS2, respectively. The proposed strategy may pave the way for further design optimization of lead-free double perovskite solar cells.

cond-mat.mtrl-sci↗

arXiv2022

First-principles calculations to investigate structural, elastic, electronic, thermodynamic, and thermoelectric properties of CaPd$_3$B$_4$O$_{12}$ (B = Ti, V) perovskite

This study has explored numerous physical properties of CaPd$_3$Ti$_4$O$_{1}$2 (CPTO) and CaPd$_3$V$_4$O$_{12}$ (CPVO) quadruple perovskites employing the density functional theory (DFT) method. The mechanical permanence of these two compounds was observed by the Born stability criteria as well. The band structure of CPTO reveals a 0.88 and 0.46 eV direct narrow band gap while using GGA-mBJ and GGA-PBE potentials, respectively, which is an indication of its fascinating semiconducting nature. The calculated partial density of states indicates the strong hybridization between Pd-4d and O-2p orbital electrons for CPTO, whereas Pd-4d and V-3d-O-2p for CPVO. The study of the chemical bonding nature and electronic charge distribution graph reveals the coexistence of covalent O-V/Pd bonds, ionic O-Ti/Ca bonds, as well as metallic Ti/V-Ti/V bonding for both compounds. The Fermi surface of CPVO ensures a kind of hole as well as electron faces simultaneously, indicating the multifarious band characteristic. The prediction of the static real dielectric function (optical property) of CPTO at zero energy implies its promising dielectric nature. The photoconductivity and absorption coefficient of CPBO display good qualitative compliance with the consequences of band structure computations. The calculated thermodynamic properties manifest the thermodynamical stability for CPBO, whereas phonon dispersions of CPVO exhibit stable phonon dispersion in contrast to slightly unstable phonon dispersion of CPTO. The predicted Debye temperature ($θ_D$) has been utilized to correlate its topical features including thermoelectric behaviors. The studied thermoelectric transport properties of CPTO yielded the Seebeck coefficient (186 V/K), power factor (11.9 Wcm$^{-1}$K$^{-2}$), and figure of merit (ZT) value of about 0.8 at 800 K, indicating that this material could be a promising candidate for thermoelectric applications.

physics.app-ph↗

arXiv2022

Design and numerical investigation of cadmium telluride (CdTe) and iron silicide (FeSi2) based double absorber solar cells to enhance power conversion efficiency

Inorganic CdTe and FeSi2-based solar cells have recently drawn a lot of attention because they offer superior thermal stability and good optoelectronic properties compared to conventional solar cells. In this work, a unique alternative technique is presented by using FeSi2 as a secondary absorber layer and In2S3 as the window layer for improving photovoltaic (PV) performance parameters. Simulating on SCAPS-1D, the proposed double-absorber (Cu/FTO/In2S3/CdTe/FeSi2/Ni) structure is thoroughly examined and analyzed. The window layer thickness, absorber layer thickness, acceptor density (NA), donor density (ND), defect density (Nt), series resistance (RS), and shunt resistance (Rsh) were simulated in detail for optimization of the above configuration to improve PV performance. According to this study, 0.5 um is the optimized thickness for both the CdTe and FeSi2 absorber layers in order to maximize efficiency. Here, the value of the optimum window layer thickness is 50 nm. For using CdTe as a single absorber, the efficiency is achieved by 13.26%. But for using CdTe and FeSi2 as a dual absorber, the efficiency is enhanced and the obtaining value is 27.35%. The other parameters are also improved and the obtaining values for fill factor (FF) are 83.68%, open-circuit voltage (Voc) is 0.6566V, and short circuit current density (JSc) is 49.78 mA/cm2. Furthermore, the proposed model performs good at 300 K operating temperature. The addition of the FeSi2 layer to the cell structure has resulted in a significant quantum efficiency (QE) enhancement because of the rise in solar spectrum absorption at longer wavelengths. The findings of this work offer a promising approach for producing high-performance and reasonably priced CdTe-based solar cells.

physics.app-ph↗

arXiv2022

A Review of Applications, Prospects, and Challenges of Proton-Conducting Zirconates in Electrochemical Hydrogen Devices

In the future, when fossil fuels are exhausted, alternative energy sources will be essential for everyday needs. Hydrogen-based energy can play a vital role in this aspect. This energy is green, clean, and renewable. Elec-trochemical hydrogen devices have been used extensively in nuclear power plants to manage hydrogen-based renewable fuel. Doped zirconate materials are commonly used as an electrolyte in these electrochemical devices. These materials have excellent physical stability and high proton transport numbers, which make them suitable for multiple applications. Doping enhances the physical and electronic properties of zirconate materials and makes them ideal for practical applications. This review highlights the applications of zirconate-based pro-ton-conducting materials in electrochemical cells, particularly in tritium monitors, tritium recovery, hydrogen sensors, and hydrogen pump systems. The central section of this review summarizes recent investigations and provides a comprehensive insight into the various doping schemes, experimental setup, instrumentation, op-timum operating conditions, morphology, composition, and performance of zirconate electrolyte materials. In addition, different challenges that are hindering zirconate materials from achieving their full potential in elec-trochemical hydrogen devices are discussed. Finally, this paper lays out a few pathways for aspirants who wish to undertake research in this field.

physics.app-ph↗

arXiv2022

Effect of various electron and hole transport layers on the performance of CsPbI3-based perovskite solar cells: A numerical investigation in DFT, SCAPS-1D, and wxAMPS frameworks

CsPbI3 has recently received tremendous attention as a possible absorber of perovskite solar cells (PSCs). However, CsPbI3-based PSCs have yet to achieve the high performance of the hybrid PSCs. In this work, we performed a density functional theory (DFT) study using the Cambridge Serial Total Energy Package (CASTEP) code for the cubic CsPbI3 absorber to compare and evaluate its structural, electronic, and optical properties. The calculated electronic band gap (Eg) using the GGA-PBE approach of CASTEP was 1.483 eV for this CsPbI3 absorber. Moreover, the computed density of states (DOS) exhibited the dominant contribution from the Pb-5d orbital, and most charge also accumulated for the Pb atom as seen from the electronic charge density map. Fermi surface calculation showed multiband character, and optical properties were computed to investigate the optical response of CsPbI3. Furthermore, we used IGZO, SnO2, WS2, CeO2, PCBM, TiO2, ZnO, and C60 as the electron transport layers (ETLs), and Cu2O, CuSCN, CuSbS2, Spiro-MeOTAD, V2O5, CBTS, CFTS, P3HT, PEDOT: PSS, NiO, CuO, and CuI as the hole transport layers (HTLs) to identify the best HTL/CsPbI3/ETL combinations using the SCAPS-1D solar cell simulation software. Among 96 device structures, the best-optimized device structure, ITO/TiO2/CsPbI3/CBTS/Au was identified, which exhibited an efficiency of 17.9%. The effect of absorber and ETL thickness, series resistance, shunt resistance, and operating temperature was also evaluated for the six best devices along with their corresponding generation rate, recombination rate, capacitance-voltage, current density-voltage, and quantum efficiency characteristics. The obtained results from SCAPS-1D were also compared with wxAMPS simulation software.

cond-mat.mtrl-sci↗