arXiv subjects

Meghan P. Patankar

Publications and source records attributed to Meghan P. Patankar.

14 recordsLinked to original sources

arXiv2026

Superconducting cavity probes sliding ferroelectricity in small-angle twisted WSe$_2$

Ferroelectricity is a property of materials that exhibit spontaneous charge polarization. Ferroelectricity in 2D materials is interesting because of their applications in memory devices and field-effect transistors. Recently, a new type of ferroelectricity, known as sliding ferroelectricity, has been discovered, in which parallel-stacked bilayers of hexagonal boron nitride (hBN) or transition metal dichalcogenides (TMDCs) develop an out-of-plane electric polarization. In this work, we probe the polarization of small-angle parallel stacked WSe$_2$ by measuring its high-frequency AC response, achieved by embedding it into a half-wave superconducting coplanar waveguide cavity. We observe a hysteretic response in the capacitance of the stack and quality factor of the cavity, confirming ferroelectric switching in the system. Our results further reveal relaxation effects associated with ferroelectric domain-wall motion. This cavity-based technique has potential applications in probing domain-wall dynamics in a ferroelectric system at high frequencies.

cond-mat.mes-hall↗

arXiv2025

Kerr non-linearity enhances the response of a graphene Josephson bolometer

Highly sensitive, broadband bolometers are of great interest because of their versatile usage in wide areas starting from dark matter search, radio astronomy, material science, and qubit readouts in cQED experiments. There have been different realizations of bolometers using superconducting thin films, nanowires, quantum dots, and various 2D materials in the recent past. The challenge is to have a single device that combines high sensitivity, broad bandwidth, a fast readout mechanism, and low noise. Here we demonstrate the first usage of a Josephson parametric amplifier (JPA) as a highly sensitive bolometer. Our key finding is the Kerr non-linearity of the JPA boosts the device's sensitivity. When the bolometer is biased in the non-linear regime, it enhances the sideband signals (~100 times), resulting in an order of magnitude improvement in sensitivity compared to the linear regime. In the non-linear biasing of the device, we achieve a NEP~500 aW/sqrt(Hz). Our bolometer offers a fast detection scheme with a thermal time constant of 4.26 us and an intrinsic JPA time constant of 70 ns. Our device's broadband and fast operation are key and new compared to previously studied graphene-based bolometers. In our device, the gate voltage tunability and the possibility of multiplexing combined with the sensitive bolometric performance offer an opportunity for integrated quantum sensor arrays. Our work demonstrates a way forward to enhance the performance of quantum sensors based on 2D materials by leveraging the inherent non-linear response.

cond-mat.mes-hall↗

arXiv2025

The quantromon: A qubit-resonator system with orthogonal qubit and readout modes

The measurement of a superconducting qubit is implemented by coupling it to a resonator. The common choice is transverse coupling, which, in the dispersive approximation, introduces an interaction term which enables the measurement. This cross-Kerr term provides a qubit-state dependent dispersive shift in the resonator frequency with the device parameters chosen carefully to get sufficient signal while minimizing Purcell decay of the qubit. We introduce a two-mode circuit, nicknamed quantromon, with two orthogonal modes implementing a qubit and a resonator. Unlike before, where the coupling term emerges as a perturbative expansion, the quantromon has intrinsic cross-Kerr coupling by design. Our experiments implemented in a hybrid 2D-3D cQED architecture demonstrate some unique features of the quantromon like weak dependence of the dispersive shift on the qubit-resonator detuning and intrinsic Purcell protection. In a tunable qubit-frequency device, we show that the dispersive shift ($2χ/2π$) changes by only $0.8$ MHz while the qubit-resonator detuning ($Δ/2π$) is varied between $0.398$ GHz - $3.288$ GHz. We also demonstrate Purcell protection in a second device where we tune the orthogonality between the two modes. Finally, we demonstrate a single-shot readout fidelity of $98.3\%$ without using a parametric amplifier which is comparable to the state-of-the-art and suggests a potential simplification of the measurement circuitry for scaling up quantum processors.

quant-ph↗

arXiv2024

Superconducting Cavity-Based Sensing of Band Gaps in 2D Materials

The superconducting coplanar waveguide (SCPW) cavity plays an essential role in various areas like superconducting qubits, parametric amplifiers, radiation detectors, and studying magnon-photon and photon-phonon coupling. Despite its wide-ranging applications, the use of SCPW cavities to study various van der Waals 2D materials is relatively unexplored. The resonant modes of the SCPW cavity exquisitely sense the dielectric environment. In this work, we measure the charge compressibility of bilayer graphene coupled to a half-wavelength SCPW cavity. Our approach provides a means to detect subtle changes in the capacitance of the bilayer graphene heterostructure, which depends on the compressibility of bilayer graphene, manifesting as shifts in the resonant frequency of the cavity. This method holds promise for exploring a wide class of van der Waals 2D materials, including transition metal dichalcogenides (TMDs) and their moiré where DC transport measurement is challenging.

cond-mat.mes-hall↗

arXiv2020

Long-range connectivity in a superconducting quantum processor using a ring resonator

Qubit coherence and gate fidelity are typically considered the two most important metrics for characterizing a quantum processor. An equally important metric is inter-qubit connectivity as it minimizes gate count and allows implementing algorithms efficiently with reduced error. However, inter-qubit connectivity in superconducting processors tends to be limited to nearest neighbour due to practical constraints in the physical realization. Here, we introduce a novel superconducting architecture that uses a ring resonator as a multi-path coupling element with the qubits uniformly distributed throughout its circumference. Our planar design provides significant enhancement in connectivity over state of the art superconducting processors without any additional fabrication complexity. We theoretically analyse the qubit connectivity and experimentally verify it in a device capable of supporting up to twelve qubits where each qubit can be connected to nine other qubits. Our concept is scalable, adaptable to other platforms and has the potential to significantly accelerate progress in quantum computing, annealing, simulations and error correction.

quant-ph↗

arXiv2019

Engineering Cross Resonance Interaction in Multi-modal Quantum Circuits

Existing scalable superconducting quantum processors have only nearest-neighbor coupling. This leads to reduced circuit depth, requiring large series of gates to perform an arbitrary unitary operation in such systems. Recently, multi-modal devices have been demonstrated as a promising candidate for small quantum processor units. Always on longitudinal coupling in such circuits leads to implementation of native high fidelity multi-qubit gates. We propose an architecture using such devices as building blocks for a highly connected larger quantum circuit. To demonstrate a quantum operation between such blocks, a standard transmon is coupled to the multi-modal circuit using a 3D bus cavity giving rise to small exchange interaction between the transmon and one of the modes. We study the cross resonance interaction in such systems and characterize the entangling operation as well as the unitary imperfections and cross-talk as a function of device parameters. Finally, we tune up the cross resonance drive to implement multi-qubit gates in this architecture.

quant-ph↗

arXiv2019

Multiplexed readout of four qubits in 3D cQED architecture using broadband JPA

We propose and demonstrate a frequency-multiplexed readout scheme in 3D cQED architecture. We use four transmon qubits coupled to individual rectangular cavities which are aperture-coupled to a common rectangular waveguide feedline. A coaxial to waveguide transformer at the other end of the feedline allows one to launch and collect the multiplexed signal. The reflected readout signal is amplified by an impedance engineered broadband parametric amplifier with 380 MHz of bandwidth. This provides us high fidelity single-shot readout of multiple qubits using compact microwave circuitry, an efficient way for scaling up to more qubits in 3D cQED.

quant-ph↗

arXiv2018

A programmable three-qubit superconducting processor with all-to-all connectivity

Superconducting circuits are at the forefront of quantum computing technology because of the unparalleled combination of good coherence, fast gates and flexibility in design parameters. The majority of experiments demonstrating small quantum algorithms in the superconducting architecture have used transmon qubits and transverse qubit-qubit coupling. However, efficient universal digital computing has remained a challenge due to the fact that majority of the state-of-art architectures rely on nearest-neighbor coupling in one or two dimensions. The limited connectivity and the availability of only two-qubit entangling gates result in inefficient implementation of algorithms with reduced fidelity. In this work, we present a programmable three-qubit processor, nicknamed "trimon", with strong all-to-all coupling and access to native three-qubit gates. We implement three-qubit version of various algorithms, namely Deutsch-Jozsa, Bernstein-Vazirani, Grover's search and the quantum Fourier transform, to demonstrate the performance of our processor. Our results show the potential of the trimon as a building block for larger systems with enhanced qubit-qubit connectivity.

quant-ph↗

arXiv2016

Implementation of pairwise longitudinal coupling in a three-qubit superconducting circuit

We present the "trimon", a multi-mode superconducting circuit implementing three qubits with all-to-all longitudinal coupling. This always-on interaction enables simple implementation of generalized controlled-NOT gates which form a universal set. Further, two of the three qubits are protected against Purcell decay while retaining measurability. We demonstrate high-fidelity state swapping operations between two qubits and characterize the coupling of all three qubits to a neighbouring transmon qubit. Our results offer a new paradigm for multi-qubit architecture with applications in quantum error correction, quantum simulations and quantum annealing.

quant-ph↗

arXiv2016

Broadband parametric amplification with impedance engineering: Beyond the gain-bandwidth product

We present an impedance engineered Josephson parametric amplifier capable of providing bandwidth beyond the traditional gain-bandwidth product. We achieve this by introducing a positive linear slope in the imaginary component of the input impedance seen by the Josephson oscillator using a $λ/2$ transformer. Our theoretical model predicts an extremely flat gain profile with a bandwidth enhancement proportional to the square root of amplitude gain. We experimentally demonstrate a nearly flat 20 dB gain over a 640 MHz band, along with a mean 1-dB compression point of -110 dBm and near quantum-limited noise. The results are in good agreement with our theoretical model.

cond-mat.mes-hall↗

arXiv2013

Doped Polyaniline: A Possible Anode for Organic Electronics

Polymer based printable organic thin film transistor (OTFT) is a viable low cost alternative to amorphous silicon based thin film transistors and possesses light-weight and flexibility advantage. In this paper, we report on the hole injecting properties of doped PANI in OLED devices using it as an anode. From these results we conclude that hole doped PANI layers can be used as a low contact resistance source and drain electrode material for polymer OTFTs.

cond-mat.mtrl-sci↗

arXiv2013

Study of F4TCNQ dopant diffusion using transport measurements in organic semiconductors

In this paper, we report on electrical transport in F4TCNQ doped organic semiconductor (host) materials. By monitoring the conductance of the sample in-situ during and after deposition, we show that sequential deposition of F4TCNQ and host semiconductor results in bulk doping of the semiconductor. In addition, the doping density (and conductivity) of the host can be easily controlled by adjusting the thickness of the bottom F4TCNQ layer. This alternative scheme for doping is simpler than the conventional way of doping small molecules which involves simultaneous co-evaporation of host and dopant. In the sequential doping scheme outlined here, bulk doping of the host takes place due to rapid diffusion of F4TCNQ in the host material. The motion of F4TCNQ in the host is complex and is not always described by a simple diffusion process. In situ transport measurements provide a quick and easy way of measuring dopant diffusion in new hosts. Based on the doping results, we also outline a possible route to improved transconductance for organic thin film transistors in a manufacturing environment.

cond-mat.mtrl-sci↗

arXiv2006

Bulk and contact-sensitized photocarrier generation in single layer TPD devices

In this paper, we report on the photoelectronic properties of TPD studied in sandwich geometry. In particular, we have obtained from both forward and reverse bias measurements the "mew-tau" product for holes in TPD. "mew" is the hole mobility and "tau" the carrier trapping time. The "mew-tau" product is a measure of the electronic quality of the material and allows a quantitative comparison of different samples. We have carried out numerical simulations to understand the photocurrent in these structures. We show that in reverse bias, the photocurrent (PC) is due to bulk. The carrier generation is governed by field assisted exciton dissociation at electric fields greater than 10^6 V/cm. At lower fields the generation of carriers occurs spontaneously in the bulk of the sample. In forward bias, the photocurrent is due to exciton dissociation at the ITO contact. We also obtain a "mew-tau" product for holes from forward bias PC measurements which is in agreement with the value obtained from reverse bias measurements. Based on our experiments, we demonstrate that TPD in a sandwich structure is a good candidate for cheap large area solar blind UV detector arrays.

cond-mat.mtrl-sci↗

arXiv2005

Photoconduction in Alq3

Photoelectronic properties of Alq3 were studied by photoconductivity measurements in thin film, sandwich (ITO/Alq3/LiF/Al) devices. We find that the photocurrent is dominated by bulk generation of carriers for incident photon energies greater than 2.75 eV. The quantum efficiency of photocarrier generation has been measured from carrier collection measurements to be about 10%. The quantum efficiency is largely independent of electric field. This enables a direct measurement of the electric field dependence of mobility using photoconductivity measurements, which is used for quantitative analysis of the dark forward current in these devices. Photoconductivity measurements were also used to obtain (μ_{0n} τ_n) product which can be used as a measure of material quality. For Alq3, we find that the value of (μ_{0n} τ_n) product was between 3x10^{-15} cm^2/V to 8x10^{-15} cm^2/V for different samples. In forward bias, at high field the photocurrent shows saturation accompanied by a phase shift. These effects are attributed to space charge effects in the device.

cond-mat.other↗