arXiv subjects

Meguya Ryu

Publications and source records attributed to Meguya Ryu.

At least 19 recordsLinked to original sources

arXiv2026

Diamond membranes: platform for photonic and opto-mechanical applications

Diamond 1 - 10 micrometers thick membranes are platform for photonic, quantum and opto-mechanic devices with applications across UV-IR spectral ranges. IR characterization of diamond gratings in reflection and transmission showed a change of the IR absorbance dichroism between positive and negative when the grating period was 1-2 wavelengths (free space) including inside the region of the intrinsic diamond absorbance. Femtosecond laser cutting of micrometers-wide and mm-long structures are demonstrated by steps of carbonization > 0.4 J/cm2/pulse (1030 nm/200 fs) and oxidation of diamond membranes. Light intensity distribution inside form-birefringent diamond structure was modeled for a scaled-down structure and wavelength to reveal characteristic interference patterns for different polarizations.

physics.optics↗

arXiv2026

Olivine annealed up to 1500 C: changes traced by polarised IR reflectance and magnetization

Spectral analysis at the infrared (IR) spectral range is introduced with assignment of synthetic red-green-blue (RGB) colours defined by adjustable wavelength and bandwidth. The RGB bands were selected at the phase-specific absorbance A or reflectance R bands of olivine and related materials, which can be formed via high temperature annealing (HTA) of natural minerals up to 1500 C. Natural olivines were collected from quarry at volcanic site in Mortlake, Victoria, Australia and spectrally characterised during IR-THz spectroscopy beamtime experiments at Australian Synchrotron. Phase changes in HTA natural olivines were traced by correlation of optical IR 4-polarisation spectroscopy, X-ray energy dispersive spectroscopy and magnetisation. After HTA, olivine samples were magnetized via precipitation of Fe-rich oxides.

physics.geo-ph↗

arXiv2026

Nanoscale Surface Analysis of High Entropy Alloy

Nanoscale surface analysis of 1 micrometer thick high entropy alloys (HEAs) was carried out using nano-IR for hyperspectral imaging and single point spectroscopy in the 700-1700 1/cm spectral range. Nano-IR is based on the detection of scattered light from an oscillating metal coated nano-tip in one of the arms of the Fourier transform infrared spectrometer and has a resolution defined by the tip radius of the probe, 20 nm, regardless of the excitation wavelength. HEA CuPdAgPtAu showed an absorption and reflection increase at 900-1100 1/cm band, which is consistent with Drude-Lorenz modeling of permittivity, however, could also signify oxide formation as tested by X-ray photoelectron spectroscopy of CuPdAgPtAu and CrFeCoNiCuMo. Realization of polarization analysis for nano-IR nano-spectroscopy in the plane perpendicular to the sample's surface is discussed and modeled. The currently available modality of surface analysis with the excitation-detection mode of the p-pol. antenna can be extended to full 3D analysis of the orientational dependencies of local absorbance and refractive index.

physics.optics↗

arXiv2026

High Entropy Alloy under Shock Compression: Optical-Pump X-Ray-Probe

High entropy alloys (HEAs) are multi-principal-element alloys designed for tailorable mechanical performance and have been attracting significant engineering interest, yet their fundamental behaviour under extreme dynamic conditions, such as shock loading, remains unexplored. Here, we report laser-shock experiments on two different types of 1-micrometers-thick HEA microfilms, CuPdAgPtAu and CrFeCoNiCuMo, on 25-micrometers-thick black-Kapton ablator driven by a high intensity laser pulse (532 nm, 5 ns, 16 J, 0.5-mm diameter focal spot) and probed by an X-ray free electron laser (XFEL) pulse (12 keV, 7 fs). Time-resolved X-ray diffraction (XRD) shows the formation of a transient phase with a lattice compression up to 5.1% of the CuPdAgPtAu HEA along the (111) plane; this transient compressed phase existed for 0.3 ns. The impedance matching Hugoniot analysis estimated a shock pressure of 55 +/- 6 GPa in the HEA film, while Au- and Fe-based equations of state (EoS) modelling predict 80 GPa (0.8 MBar) at the free HEA surface. The free HEA surface reached maximum velocities of ~ 5 km/s as recorded from in situ monitoring with the velocity interferometry system for any reflector (VISAR) imaging. These initial HEA results show the suitability of HEA sample preparation and XFEL-based XRD characterisation under extreme shock loading, and are promising for experimental determination of the EoS of this emerging class of materials (beamtime proposal No.: 2024A8503 for a 6-hour preliminary experiment).

cond-mat.mtrl-sci↗

arXiv2026

Structure orientation determined in transmission and reflection: q-plate

Determination of orientation in the imaged sample/scene has a large application potential when the anisotropy of properties is analysed, usually, under a linearly polarised illumination. This study combined several improvements of microscopy imaging: use of an incoherent white illumination source (a lamp) with a spectral filter to define a spectral window, a plastic circular polariser to image with circularly polarised light (instead of linear), and a 4-pol. camera with integrated polarisers for simultaneous acquisition of images at four pi/4-azimuth shifts. In the transmission mode, a high-fidelity readout of form birefringent optical elements, q-plates, was achieved using a fitting procedure based on the analytical expression of S0 (intensity) Stokes parameters at the pixel level. In the reflection mode, the S0 fit was used to determine the azimuth orientation of the q-plates, as well as a generic Amp x cos(2Q1 - 2Q0) + Offset fit (at pixel level) applied to images taken at four Q1 azimuths. The 4-pol. analysis in reflection under circularly polarised illumination is discussed.

physics.optics↗

arXiv2025

Mid infrared imaging of mass transport in polymer electrolyte membranes of an operating microfluidic water electrolyzer

This study investigates water transport in a polymer electrolyte membrane (PEM) electrolyzer using operando infrared spectroscopic imaging. By testing different H2SO4 anolyte concentrations, it examines electrochemical performance, water diffusion, and membrane hydration. Higher anolyte concentrations increased standard deviations in current densities and led to water diffusion gradients revealed by infrared imaging and confirming localized water transport variations. The study highlights the need for improved water management and optimized electrolyzer design for stable and efficient PEM electrolysis in industrial applications.

cond-mat.soft↗

arXiv2025

Anisotropy analysis of bamboo and tooth using 4-angle polarization micro-spectroscopy

To investigate the anisotropic properties of biomaterials, two distinct classes are considered: polymer-based (e.g., cellulose in plants) and crystalline-based (e.g., enamel in teeth), each demonstrating distinct structural and functional characteristics. Four-angle polarization (4-pol.) spectral mapping of sub-1 {\mu}m bamboo slices was carried out in the mid-IR spectral range (2.5-20 {\mu}m) to reveal the 3D organization of the chemical bonding of cellulose using the key characteristic absorption bands associated with C-O-C and C-N vibrational modes. The longitudinal and transverse microtome slices revealed a switch between the presence and absence of dichroism in parenchyma cell walls and vascular bundles. The cell wall showed continuous alignment of the C-O-C stretching vibrational mode (8.6 {\mu}m/1163 cm-1) down to the pixel resolution of ~ 4 {\mu}m (the step size in imaging) in the transverse slice; the cell wall thickness is ~ 1 {\mu}m. Thin microtomed slices of a tooth were measured in transmission and reflection modes. The single-point reflection measurements, performed using two perpendicular orientations, revealed orientational anisotropy in the enamel, which was absent in the dentin region. High sub-diffraction limited lateral resolution was numerically validated using a simplified-model of a Gaussian beam reading out material pixels with a defined orientation of absorption. It is shown that the orientation of small ~ {\lambda}/10 ~ 1 {\mu}m objects can be revealed using a focal spot of ~ {\lambda}/NA ~ 20 {\mu}m, defining the diffraction limit for the objective lens with a numerical aperture NA ~ 0.5.

physics.bio-ph↗

arXiv2025

Bridging Spectroscopy and Advanced Molecular Orientation Analysis with New 4+ Angle Polarization Toolbox in Quasar

Anisotropy plays a critical role in governing the mechanical, thermal, electrical, magnetic, and optical properties of materials, influencing their behavior across diverse applications. Probing and quantifying this directional dependence is crucial for advancing materials science and biomedical research, as it provides a deeper understanding of structural orientations at the molecular level, encompassing both scientific and industrial benefits. This study introduces the "4+ Angle Polarization" widget, an innovative extension to the open-source Quasar platform (https://quasar.codes/), tailored for advanced multiple-angle polarization analysis. This toolbox enables precise molecular orientation analysis of complex microspectroscopic datasets through a streamlined workflow. Using polarized Fourier transform infrared (p-FTIR) spectroscopy, we demonstrate its versatility across various sample types, including polylactic acid (PLA) organic crystals, murine cortical bone, and human osteons. By overcoming the limitations of traditional two-angle methods, the widget significantly enhances the accuracy of structural and orientational analysis. This novel analytical tool expands the potential of multiple-angle p-FTIR techniques into advanced characterization of structural anisotropy in heterogeneous systems, providing transformative insights for materials characterization, biomedical imaging and beyond.

cond-mat.mtrl-sci↗

arXiv2024

Interferometric microscale measurement of refractive index at VIS and IR wavelengths

Determination of refractive index of micro-disks of a calcinated ($1100^\circ$C in air) photo-resist SZ2080$^\mathrm{TM}$ was carried out using transmission and reflection spectroscopy. Interference fringes at specific wavenumbers/wavelengths were selected for determination of the optical thickness, hence, the refractive index when the thickness of micro-disks was measured by scanning electron microscopy (SEM). Refractive index of disks of $\sim 6\pm 1~\mu$m thickness were determined at visible and IR (2.5-13~$\mu$m) spectral ranges and where $2.2\pm 0.2$ at visible and IR wavelengths. Peculiarities of optical characterisation of micro-optical structures are discussed in view of possible uncertainties in the definition of geometric parameters, shape and mass density redistribution.

physics.optics↗

arXiv2023

Determination of Stokes vector from a single image acquisition

Four Stokes parameters (1852) define the polarisation state of light. Measured changes of the Stokes vector of light traversing an inhomogeneous sample are linked to the local anisotropies of absorption and refraction and are harnessed over an increasing range of applications in photonics, material, and space/earth observation. Several independent polarisation sensitive measurements are usually required for determination of the all four Stokes parameters, which makes such characterisation procedure time-consuming or requires complex setups. Here we introduce a single-snapshot approach to Stokes polarimetry in transmission by use of a 4-polarisation camera with the on-chip integrated polarisers. A quarter-waveplate was added in front of the sample and was illuminated by a linearly polarised light. This approach is demonstrated by measuring birefringence $\Delta n\sim 0.012$ of spider silk of only $\sim 6~\mu$m-diameter using microscopy, however, due to its generic nature, it is transferable to other spectral ranges and imaging applications, e.g., imaging from a fast moving satellite or drone or monitoring fast changing events such as phase transitions.

physics.optics↗

arXiv2020

Tilted black-Si: ~0.45 form-birefringence from sub-wavelength needles

The self-organised conical needles produced by plasma etching of silicon (Si), known as black silicon (b-Si), create a form-birefringent surface texture when etching of Si orientated at angles of $θ_i < 50 - 70^\circ$ (angle between the Si surface and vertical plasma E-field). The height of the needles in the form-birefringent region following 15~min etching was $d\sim 200$ nm and had a 100 $μ$m width of the optical retardance/birefringence, characterised using polariscopy. The height of the b-Si needles corresponds closely to the skin-depth of Si $\simλ/4$ for the visible spectral range. Reflection-type polariscope with a voltage-controlled liquid-crystal retarder is proposed to directly measure the retardance $Δn\times d/λ\approx 0.15$ of the region with tilted b-Si needles. The quantified form birefringence of $Δn = - 0.45$ over $λ= 400-700$~nm spectral window was obtained. Such high values of $Δn$ at visible wavelengths can only be observed in the most birefringence calcite or barium borate as well as in liquid crystals. The replication of b-Si into Ni-shim with high fidelity was also demonstrated and can be used for imprinting of the b-Si nanopattern into other materials.

physics.app-ph↗

arXiv2019

Nanoscale optical and structural characterisation of silk

Background: Nanoscale composition of silk defining its unique properties via a hierarchical structural anisotropy has to be analysed at the highest spatial resolution of tens-of-nanometers corresponding to the size of fibrils made of b-sheets, which are the crystalline building blocks of silk. Results: Nanoscale optical and structural properties of silk have been measured from 100-nm thick longitudinal slices of silk fibers with ~10 nm resolution, the highest so far. Optical sub-wavelength resolution in hyperspectral mapping of absorbance and molecular orientation were carried out for comparison at IR wavelengths 2-10 micrometers using synchrotron radiation. Conclusion: Reliable distinction of transmission changes by only 1-2% due to anisotropy of amide bands was obtained from nano-thin slices of silk.

physics.app-ph↗

arXiv2018

Paracetamol Micro-Structure Analysis by Optical Mapping

Domain structure of paracetamol -- popular antipyretic analgesic -- was investigated by infrared (IR) spectroscopy using synchrotron radiation. Absorbance and retardance maps reveal molecular orientation inside the micro-domains of the paracetamol form II which has a better water solubility and compressibility compared to the commercially used forms I. The developed method of analysis representing orientation of optical slow(fast)-axis is compared with azimuthal orientation of the absorbance at several specific IR bands using vector maps. High brightness of synchrotron radiation and hyper-spectral mapping of structural domains in paracetamol clearly reveals the domain boundaries and can potentially be used to observe \emph{in situ} intra-phase transformations of paracetamol forms-I, II, III and melting, which are important for making medical tablets and powders by an industrial process.

cond-mat.mtrl-sci↗

arXiv2018

Simple multi-wavelength imaging of birefringence: case study of silk

A polarised light imaging microscopy with an addition of liquid crystal (LC) phase retarder was implemented to determine the birefringence of silk fibers with the high 2 micrometers spatial resolution. The measurement was carried out with silk fiber (the optical slow axis) and the slow axis of the LC retarder set parallel (a perpendicular alignment can also be used). The direct fit of the transmission data provides a high fidelity determination of birefringence, $Dn = 1.63\times 10^{-2}$ (with 2% uncertainty) of the brown silk fiber (Antheraea pernyi) averaged over the wavelength range $l =$ (425-625) nm. By measuring retardance at four wavelengths it was possible to determine the true value of the birefringence of a thick sample when an optical path may include large number of wavelengths ($2p$ cycles in phase). The numerical procedures and required hardware are described for the do-it-yourself assembly of the imaging polariscope at a fractional budget compared with commercial units.

physics.ins-det↗

arXiv2018

Micro-thermocouple on nano-membrane: thermometer for nanoscale measurements

A thermocouple of Au-Ni with only 2.5-micrometers-wide electrodes on a 30-nm-thick Si3N4 membrane was fabricated by a simple low-resolution electron beam lithography and lift off procedure. The thermocouple is shown to be sensitive to heat generated by laser as well as an electron beam. Nano-thin membrane was used to reach a high spatial resolution of energy deposition and to realise a heat source of sub-1 micrometer diameter. This was achieved due to a limited generation of secondary electrons, which increase a lateral energy deposition. A low thermal capacitance of the fabricated devices is useful for the real time monitoring of small and fast temperature changes, e.g., due to convection, and can be detected through an optical and mechanical barrier of the nano-thin membrane. Temperature changes up to ~2x10^5 K/s can be measured at 10 kHz rate. A simultaneous down-sizing of both, the heat detector and heat source strongly required for creation of thermal microscopy is demonstrated. Peculiarities of Seebeck constant (thermopower) dependence on electron injection into thermocouple are discussed. Modeling of thermal flows on a nano-membrane with presence of a micro-thermocouple was carried out to compare with experimentally measured temporal response.

cond-mat.mes-hall↗

arXiv2017

Nanoscale chemical mapping of laser-solubilized silk

A water soluble amorphous form of silk was made by ultra-short laser pulse irradiation and detected by nanoscale IR mapping. An optical absorption-induced nanoscale surface expansion was probed to yield the spectral response of silk at IR molecular fingerprinting wavelengths with a high ~20 nm spatial resolution defined by the tip of the probe. Silk microtomed sections of 1-5 micrometers in thickness were prepared for nanoscale spectroscopy and a laser was used to induce amorphisation. Comparison of silk absorbance measurements carried out by table-top and synchrotron Fourier transform IR spectroscopy proved that chemical imaging obtained at high spatial resolution and specificity (able to discriminate between amorphous and crystalline silk) is reliably achieved by nanoscale IR. A nanoscale material characterization using synchrotron IR radiation is discussed.

physics.app-ph↗

arXiv2017

3D laser printing by ultra-short laser pulses for micro-optical applications: towards telecom wavelengths

Three dimensional (3D) fast (< 0.5 hour) printing of micro-optical elements down to sub-wavelength resolution over 100 micrometers footprint areas using femtosecond (fs-)laser oscillator is presented. Using sub-1 nJ pulse energies, optical vortex generators made of polymerised grating segments with an azimuthally changing orientation have been fabricated in SZ2080 resist; width of polymerised rods was ~150 nm and period 0.6-1 micrometers. Detailed phase retardance analysis was carried out manually with Berek compensator (under a white light illumination) and using an equivalent principle by an automated Abrio implementation at 546 nm. Direct experimental measurements of retardance was required since the period of the grating was comparable (or larger) than the wavelength of visible light. By gold sputtering, transmission-type optical vortex generators were turned into reflective ones with augmented retardance, n.h defined by the form birefringence, n, and the height h = 2d where d is the thickness of the polymerised structure. Retardance reached 315 nm as measured with Berek compensator at visible wavelengths. Birefringent phase delays of 180 degrees (or half-wavelength) required for high purity vortex generators can be made based on the proposed approach. Optical vortex generators for telecom wavelengths with sub-wavelength patterns of azimuthally oriented gratings are amenable by direct laser polymerisation.

physics.optics↗

arXiv2017

Polarisation of THz synchrotron radiation: from its measurement to control

Polarisation analysis of synchrotron THz radiation was carried out with a standard stretched polyethylene polariser and revealed that the linearly polarised (horizontal) component contributes up to 22 +/- 5% to the circular polarised synchrotron emission extracted by a gold-coated mirror with a horizontal slit inserted near a bending magnet edge. Comparison with theoretical predictions shows a qualitative match with dominance of the edge radiation. Grid polarisers 3D-printed out of commercial acrilic resin were tested for the polariser function and showed spectral regions where the dichroic ratio DR > 1 and < 1 implying importance of molecular and/or stress induced anisotropy. Metal-coated 3D-printed THz optical elements can find a range of applications in intensity and polarisation control of THz beams.

physics.ins-det↗