arXiv subjects

Mehrdad Shaygan

Publications and source records attributed to Mehrdad Shaygan.

6 recordsLinked to original sources

arXiv2020

Flexible One-Dimensional Metal-Insulator-Graphene Diode

In this work, a novel one-dimensional geometry for metal-insulator-graphene (1D-MIG) diode with low capacitance is demonstrated. The junction of the 1D-MIG diode is formed at the 1D edge of Al2O3-encapsulated graphene with TiO2 that acts as barrier material. The diodes demonstrate ultra-high current density since the transport in the graphene and through the barrier is in plane. The geometry delivers very low capacitive coupling between the cathode and anode of the diode, which shows frequency response up to 100 GHz and ensures potential high frequency performance up to 2.4 THz. The 1D-MIG diodes are demonstrated to function uniformly and stable under bending conditions down to 6.4 mm bending radius on flexible substrate.

physics.app-ph↗

arXiv2018

All CVD Boron Nitride Encapsulated Graphene FETs with CMOS Compatible Metal Edge Contacts

We report on the fabrication and characterization of field effect transistors (FETs) based on chemical vapor deposited (CVD) graphene encapsulated between few layer CVD boron nitride (BN) sheets with complementary metal oxide semiconductor (CMOS) compatible nickel edge contacts. Non-contact Tera-hertz time domain spectroscopy (THz-TDS) of large-area BN/graphene/BN (BN/G/BN) stacks reveals average sheet conductivity >1 mS/sq and average mobility of 2500 cm$^{2}$/Vs. Improved output conductance is observed in direct current (DC) measurements under ambient conditions, indicating potential for radio-frequency (RF) applications. Moreover, we report a maximum voltage gain of 6 dB from a low frequency signal amplifier circuit. RF characterization of the GFETs yields an f$_{T}$ x L$_{g}$ product of 2.64 GHz$μ$m and an f$_{Max}$ x L$_{g}$ product of 5.88 GHz$μ$m. This study presents for the first time THz-TDS usage in combination with other characterization methods for device performance assessment on BN/G/BN stacks. The results serve as a step towards scalable, all CVD 2D material-based FETs for CMOS compatible future nanoelectronic circuit architectures.

physics.app-ph↗

arXiv2018

High Responsivity and Quantum Efficiency of Graphene / Silicon Photodiodes Achieved by Interdigitating Schottky and Gated Regions

Graphene / silicon (G/Si) heterostructures have been studied extensively in the past years for applications such as photodiodes, photodetectors and solar cells, with a growing focus on efficiency and performance. Here, a specific contact pattern scheme with interdigitated Schottky and graphene/insulator/silicon (GIS) structures is explored to experimentally demonstrate highly sensitive G/Si photodiodes. With the proposed design, an external quantum efficiency (EQE) of > 80 % is achieved for wavelengths ranging from 380 to 930 nm. A maximum EQE of 98% is observed at 850 nm, where the responsivity peaks to 635 mA/W, surpassing conventional Si p-n photodiodes. This efficiency is attributed to the highly effective collection of charge carriers photogenerated in Si under the GIS parts of the diodes. The experimental data is supported by numerical simulations of the diodes. Based on these results, a definition for the true active area in G/Si photodiodes is proposed, which may serve towards standardization of G/Si based optoelectronic devices.

physics.app-ph↗

arXiv2018

High Performance Metal-Insulator-Graphene Diodes for Radio Frequency Power Detection Application

Vertical metal-insulator-graphene (MIG) diodes for radio frequency (RF) power detection are realized using a scalable approach based on graphene grown by chemical vapor deposition and TiO2 as barrier material. The temperature dependent current flow through the diode can be described by thermionic emission theory taking into account a bias induced barrier lowering at the graphene TiO2 interface. The diodes show excellent figures of merit for static operation, including high on-current density of up to 28 A/cm^2, high asymmetry of up to 520, strong maximum nonlinearity of up to 15, and large maximum responsivity of up to 26 V^{-1}, outperforming state-of-the-art metal-insulator-metal and MIG diodes. RF power detection based on MIG diodes is demonstrated, showing a responsivity of 2.8 V/W at 2.4 GHz and 1.1 V/W at 49.4 GHz.

physics.app-ph↗

arXiv2017

Flexible Hall Sensors Based on Graphene

The excellent electronic and mechanical properties of graphene provide a perfect basis for high performance flexible electronic and sensor devices. Here, we present the fabrication and characterization of flexible graphene based Hall sensors. The Hall sensors are fabricated on 50 um thick flexible Kapton foil using large scale graphene grown by chemical vapor deposition technique on copper foil. Voltage and current normalized sensitivities of up to 0.096 V/VT and 79 V/AT were measured, respectively. These values are comparable to the sensitivity of rigid silicon based Hall sensors and are the highest values reported so far for any flexible Hall sensor devices. The sensitivity of the Hall sensor shows no degradation after being bent to a minimum radius of 4 mm, which corresponds to a tensile strain of 0.6%, and after 1,000 bending cycles to a radius of 5 mm.

physics.app-ph↗

arXiv2017

Low resistive edge contacts to CVD-grown graphene using a CMOS compatible metal

The exploitation of the excellent intrinsic electronic properties of graphene for device applications is hampered by a large contact resistance between the metal and graphene. The formation of edge contacts rather than top contacts is one of the most promising solutions for realizing low ohmic contacts. In this paper the fabrication and characterization of edge contacts to large area CVD-grown monolayer graphene by means of optical lithography using CMOS compatible metals, i.e. Nickel and Aluminum is reported. Extraction of the contact resistance by Transfer Line Method (TLM) as well as the direct measurement using Kelvin Probe Force Microscopy demonstrates a very low width specific contact resistance.

cond-mat.mes-hall↗