arXiv subjects

Meng Xiong

Publications and source records attributed to Meng Xiong.

9 recordsLinked to original sources

arXiv2026

Demonstration of a High-Q Subwavelength Dielectric Nanocylinder

The development of subwavelength dielectric cavities is essential for reducing the size of photonic devices and enabling dense optoelectronic integration. However, previouslysubwavelengthoptical cavities exhibit demonstrated Q-factors <400, limiting their applications. Here, we demonstrate a high-Q subwavelength nanocylinder by leveraging bound states in the continuum (BIC). We track BIC modes of different longitudinal orders while maintaining an ultrasmall footprint. We find that the Q-factor initially increases but then saturates at higher orders. By linking quasi-normal-mode perturbation theory with coupled-mode analysis, we reveal the physical origin of this saturation and identify an optimized dimension that balances performance with fabrication feasibility. By suspending this design in free space using nanobridges and optimizing the nanofabrication process, we experimentally realize an InP subwavelength nanocylinder with a measured Q-factor exceeding 1000. Compared with a lower-Q substrate-supported counterpart, the suspended high-Q BIC nanocylinder exhibits stronger scattering and photoluminescence signals. Our work provides a route to high-Q optical devices with ultrasmall footprints.

physics.optics↗

arXiv2026

Telecom-band site-controlled quantum dots with engineered low fine-structure splitting

Deterministic quantum light sources emitting at telecom wavelengths with vanishing fine-structure splitting (FSS) are essential components for scalable quantum communication. While self-assembled Stranski-Krastanov (SK) quantum dots (QDs) are high-quality emitters, their random positioning and shape-induced anisotropy typically limit their use in entangled-photon applications. In this work, we demonstrate site-controlled SK growth where InAs/InP QDs nucleate at the symmetric apexes of truncated InP nanopyramids. Confining adatom diffusion to a small, symmetric nucleation area suppresses anisotropic growth, promoting the nucleation of highly symmetric QDs with FSS reduced to values below our statistically validated resolution limit of $9.2~\mu$eV. At the same time, lithographically defined nucleation sites enable deterministic control of the QD position, overcoming the limitations of conventional SK growth. The high structural quality of single symmetric QDs is evidenced by the single-photon character of the emission ($g^{(2)}(0)=0.07^{+0.27}_{-0.07}$) spanning the S, C, and L telecom bands, with no evidence of lithography-induced defects affecting emission dynamics. These results demonstrate that tailoring QD symmetry through nanopyramid growth engineering provides a route toward site-controlled emitters suitable for entangled photon generation and integrated quantum photonics devices.

cond-mat.mes-hall↗

arXiv2026

Nanobeam Laser Cavities with High Quality-factor and Near-Unity Outcoupling Efficiency

Cavities with high quality (Q) factor and small mode-volume are crucial to realize high-performance nanolasers suitable for optical interconnects. In this work, we propose a novel one-dimensional photonic crystal nanobeam cavity design with fins for controlled electrical injection into the active region. An effective optimization algorithm based on first-order perturbation theory of quasinormal modes is implemented and shown to significantly enhance the cavity quality factor. The one-dimensional geometry of the cavity lends itself to unidirectional coupling of the resonant mode into the waveguide by introducing asymmetry of the mirror. The resulting design is shown to achieve high extraction efficiencies ($>90\%$) while maintaining a high Q-factor ($>10 \cdot 10^3$). Through an analysis of the cavity's decay channels, we find that the introduced asymmetry induces unexpected interactions between the cavity's decay channels. Passive InP cavities are fabricated and experimentally characterized, demonstrating record-high quality factors exceeding $170 \cdot 10^3$ for designs without fins and up to $70 \cdot 10^3$ for designs with fins, confirming the efficacy of the optimization method and quality of the fabrication process.

physics.optics↗

arXiv2026

Lasing from a Quantum-Dot-Like Buried Heterostructure in an InP Nanobeam Cavity

We report lasing from a lithographically defined buried heterostructure with an estimated lateral footprint of (107 nm)^2, embedded in an InP photonic-crystal nanobeam cavity. This represents the smallest laterally confined buried heterostructure gain region from which lasing has been observed. Despite etching of the active region during cavity definition and the associated risk of surface-related nonradiative recombination, optically pumped devices exhibit a clear lasing threshold and a narrow linewidth. By systematically varying the BH size, we investigate how the lasing threshold depends on the active volume under optical pumping. The estimated intrinsic threshold under ideal carrier injection is 57 nW, comparable to values reported for single quantum-dot nanolasers, highlighting the potential of quantum-dot-scale buried heterostructures as deterministic, scalable gain media for nanophotonic lasers.

physics.optics↗

arXiv2025

Fabrication and characterization of shape- and topology-optimized optical cavities with deep sub-wavelength confinement for interfacing with colloidal quantum dots

We employ a combined shape- and topology-optimization strategy to design manufacturable two-dimensional photonic crystal-based optical nanocavities that confine light to length scales well below the resonance wavelength. We present details of the design strategy as well as scanning electron micrographs of the fabricated indium phosphide cavities with a compact footprint of ~"4.5λ*4.5λ" , which feature gaps on the order of 10 nm and theoretical mode volumes in the gap center below (0.1 (λ/2n_air))^3. Subsequent optical characterization of the far-field emission as well as Purcell-enhanced photoluminescence from the cavities with and without spin-coated colloidal quantum dots are compared to numerical simulations. The results corroborate the potential of the design strategy and fabrication process for ensuring high yield and reliable performance as well as the viability of the material platform for exploring light-matter interaction with colloidal QDs.

physics.optics↗

arXiv2024

Confocal polarization tomography of dielectric nanocavities

We employ polarization tomography to characterize the modal properties of a dielectric nanocavity with sub-wavelength mode confinement. Our analysis of reflection spectra shows that the Fano-lineshape depends strongly on the polarization in a confocal configuration, and that the lineshape can be transformed into a Lorentzian-like peak for a certain polarization. For this polarization setting, the background is almost fully suppressed in a finite range of frequencies. This enables us to identify another resonance that has not yet been experimentally reported for these nanocavities. Lastly, we use symmetry-forbidden polarizations and show that, surprisingly, the modal resonance features of the system remain visible.

physics.optics↗

arXiv2024

A nanolaser with extreme dielectric confinement

The interaction between light and matter can be enhanced by spatially concentrating the light field to boost the photon energy density and increasing the photon dwell time to prolong energy transfer between light and matter. Traditionally, strong spatial light localization has been achieved using plasmonics, which, despite its effectiveness, entails ohmic losses. Recent advances in nanostructured dielectrics offer an avenue for achieving strong light confinement without metallic losses. However, previous studies primarily focused on minimizing the optical mode volume without adequately addressing light-matter interactions. Here, we develop a nanolaser that simultaneously localizes the electromagnetic field and excited carriers within the same region of a dielectric nanobridge. This extreme dielectric confinement of both light and matter achieves a mode volume below the diffraction limit and a subwavelength carrier volume without the introduction of lateral quantum confinement, enabling continuous-wave lasing at room-temperature. Moreover, we observe a strong correlation between the mode field and carrier distribution, and unexpectedly, the enhanced mode field localization automatically leads to more pronounced carrier localization, promoting self-alignment of light and matter, which significantly reduces the laser threshold. We quantify the intensified light-matter interaction with a newly proposed interaction volume, which generalizes the concept of mode volume to a broad class of active media. Our work lays the ground for developing ultra-efficient optoelectronic devices by greatly enhancing light-matter interactions through advanced material nanostructuring.

physics.optics↗

arXiv2024

High-throughput quantum photonic devices emitting indistinguishable photons in the telecom C-band

Single indistinguishable photons at telecom C-band wavelengths are essential for quantum networks and the future quantum internet. However, high-throughput technology for single-photon generation at 1550 nm remained a missing building block to overcome present limitations in quantum communication and information technologies. Here, we demonstrate the high-throughput fabrication of quantum-photonic integrated devices operating at C-band wavelengths based on epitaxial semiconductor quantum dots. Our technique enables the deterministic integration of single pre-selected quantum emitters into microcavities based on circular Bragg gratings. Respective devices feature the triggered generation of single photons with ultra-high purity and record-high photon indistinguishability. Further improvements in yield and coherence properties will pave the way for implementing single-photon non-linear devices and advanced quantum networks at telecom wavelengths.

quant-ph↗

arXiv2022

Electrically-driven Photonic Crystal Lasers with Ultra-low Threshold

Light sources with ultra-low energy consumption and high performance are required to realize optical interconnects for on-chip communication. Photonic crystal (PhC) nanocavity lasers are one of the most promising candidates to fill this role. In this work, we demonstrate an electrically-driven PhC nanolaser with an ultra-low threshold current of 10.2 μA emitting at 1540 nm and operated at room temperature. The lasers are InP-based bonded on Si and comprise a buried heterostructure active region and lateral p-i-n junction. The static characteristics and the thermal properties of the lasers have been characterized. The effect of disorder and p-doping absorption on the Q-factor of passive cavities was studied. We also investigate the leakage current due to the lateral p-i-n geometry by comparing the optical and electrical pumping schemes.

physics.optics↗