arXiv subjects

Mengnan Jian

Publications and source records attributed to Mengnan Jian.

13 recordsLinked to original sources

arXiv2025

RIS-Enabled UAV Communications and Sensing: Opportunities, Challenges, and Key Technologies

Unmanned Aerial Vehicles (UAVs) play a pivotal role in the emerging low-altitude economy. However, they face significant challenges in achieving reliable network coverage during transit operations. This paper provides an in-depth investigation into the characteristics and challenges of communication networks tailored for UAVs. First, we outline typical operational scenarios, traffic patterns, and a dual-layer heterogeneous network topology. This topology is essential for enabling three-dimensional continuous coverage and ensuring seamless network coexistence between UAVs and other network entities. Moreover, the paper delves into the channel characteristics and specific challenges faced by UAV Integrated Sensing and Communication (ISAC) networks. It highlights the limitations of traditional Active Phased Array Antenna (APAA)-based networks, particularly regarding cost, complexity, and site deployment constraints. We then introduce Reconfigurable Intelligent Surface (RIS)-assisted networks as a promising solution for enhancing UAV signal coverage. The key technical features of RIS are discussed, including design principles, antenna tilt configurations, new beam types, and beam tracking mechanisms. In addition, we examine the impact of highfrequency bands and their absorption peaks on signal attenuation. The paper further explores network architecture designs aimed at improving UAV signal coverage, facilitating network coexistence, and supporting RIS-enhanced UAV sensing. Field trial results evaluating the effectiveness of RIS in improving UAV coverage are presented. Finally, we outline future technological trends and highlight potential advancements to further optimize UAV communication systems. We also emphasize the importance of engineering implementation and standardization efforts in RIS-based UAV-ISAC networks.

cs.IT↗

arXiv2025

Beamforming Design for Intelligent Reffecting Surface Aided Near-Field THz Communications

Intelligent reflecting surface (IRS) operating in the terahertz (THz) band has recently gained considerable interest due to its high spectrum bandwidth. Due to the exploitation of large scale of IRS, there is a high probability that the transceivers will be situated within the near-field region of the IRS. Thus, the near-field beam split effect poses a major challenge for the design of wideband IRS beamforming, which causes the radiation beam to deviate from its intended location, leading to significant gain losses and limiting the efficient use of available bandwidths. While delay-based IRS has emerged as a potential solution, current beamforming schemes generally assume unbounded range time delays (TDs). In this letter, we first investigate the near-field beam split issue at the IRS. Then, we extend the piece-wise far-field model to the IRS, based on which, a double-layer delta-delay (DLDD) IRS beamforming scheme is proposed. Specifically, we employ an element-grouping strategy and the TD imposed on each sub-surface of IRS is achieved by a series of TD modules. This method significantly reduces the required range of TDs. Numerical results show that the proposed DLDD IRS beamforming scheme can effectively mitigate the near-field beam split and achieve near-optimal performance.

eess.SP↗

arXiv2025

Joint Size and Placement Optimization for IRS-Aided Communications with Active and Passive Elements

Different types of intelligent reflecting surfaces (IRS) are exploited for assisting wireless communications. The joint use of passive IRS (PIRS) and active IRS (AIRS) emerges as a promising solution owing to their complementary advantages. They can be integrated into a single hybrid active-passive IRS (HIRS) or deployed in a distributed manner, which poses challenges in determining the IRS element allocation and placement for rate maximization. In this paper, we investigate the capacity of an IRS-aided wireless communication system with both active and passive elements. Specifically, we consider three deployment schemes: 1) base station (BS)-HIRS-user (BHU); 2) BS-AIRS-PIRS-user (BAPU); 3) BS-PIRS-AIRS-user (BPAU). Under the line-of-sight channel model, we formulate a rate maximization problem via a joint optimization of the IRS element allocation and placement. We first derive the optimized number of active and passive elements for BHU, BAPU, and BPAU schemes, respectively. Then, low-complexity HIRS/AIRS placement strategies are provided. To obtain more insights, we characterize the system capacity scaling orders for the three schemes with respect to the large total number of IRS elements, amplification power budget, and BS transmit power. Finally, simulation results are presented to validate our theoretical findings and show the performance difference among the BHU, BAPU, and BPAU schemes with the proposed joint design under various system setups.

eess.SP↗

arXiv2025

Static IRS Meets Distributed MIMO: A New Architecture for Dynamic Beamforming

Intelligent reflecting surface (IRS) has been considered as a revolutionary technology to enhance the wireless communication performance. To cater for multiple mobile users, adjusting IRS beamforming patterns over time, i.e., dynamic IRS beamforming (DIBF), is generally needed for achieving satisfactory performance, which results in high controlling power consumption and overhead. To avoid such cost, we propose a new architecture based on the static regulated IRS for wireless coverage enhancement, where the principle of distributed multiple-input multiple-output (D-MIMO) is integrated into the system to exploite the diversity of spatial directions provided by multiple access points (APs). For this new D-MIMO empowered static IRS architecture, the total target area is partitioned into several subareas and each subarea is served by an assigned AP. We consider to maximize the worst-case received power over all locations in the target area by jointly optimizing a single set of IRS beamforming pattern and AP-subarea association. Then, a two-step algorithm is proposed to obtain its high-quality solution. Theoretical analysis unveils that the fundamental squared power gain can still be achieved over all locations in the target area. The performance gap relative to the DIBF scheme is also analytically quantified. Numerical results validate our theoretical findings and demonstrate the effectiveness of our proposed design over benchmark schemes.

cs.IT↗

arXiv2024

Intelligent Reflecting Surface Aided MIMO Networks: Distributed or Centralized Architecture?

We investigate the capacity of a broadcast channel with a multi-antenna base station (BS) sending independent messages to multiple users, aided by IRSs with N elements. In particular, both the distributed and centralized IRS deployment architectures are considered. Regarding the distributed IRS, the N IRS elements form multiple IRSs and each of them is installed near a user cluster; while for the centralized IRS, all IRS elements are located in the vicinity of the BS. To draw essential insights, we first derive the maximum capacity achieved by the distributed IRS and centralized IRS, respectively, under the assumption of line-of-sight propagation and homogeneous channel setups. By capturing the fundamental tradeoff between the spatial multiplexing gain and passive beamforming gain, we rigourously prove that the capacity of the distributed IRS is higher than that of the centralized IRS provided that the total number of IRS elements is above a threshold. Motivated by the superiority of the distributed IRS, we then focus on the transmission and element allocation design under the distributed IRS. By exploiting the user channel correlation of intra-clusters and inter-clusters, an efficient hybrid multiple access scheme relying on both spatial and time domains is proposed to fully exploit both the passive beamforming gain and spatial DoF. Moreover, the IRS element allocation problem is investigated for the objectives of sum-rate maximization and minimum user rate maximization, respectively. Finally, extensive numerical results are provided to validate our theoretical finding and also to unveil the effectiveness of the distributed IRS for improving the system capacity under various system setups.

cs.IT↗

arXiv2023

Integrated Sensing and Communication based Outdoor Multi-Target Detection, Tracking and Localization in Practical 5G Networks

The 6th generation (6G) wireless networks will likely to support a variety of capabilities beyond communication, such as sensing and localization, through the use of communication networks empowered by advanced technologies. Integrated sensing and communication (ISAC) has been recognized as a critical technology as well as an usage scenario for 6G, as widely agreed by leading global standardization bodies. ISAC utilizes communication infrastructure and devices to provide the capability of sensing the environment with high resolution, as well as tracking and localizing moving objects nearby. Meeting both the requirements for communication and sensing simultaneously, ISAC based approaches celebrate the advantages of higher spectral and energy efficiency compared to two separate systems to serve two purposes, and potentially lower costs and easy deployment. A key step towards the standardization and commercialization of ISAC is to carry out comprehensive field trials in practical networks, such as the 5th generation (5G) network, to demonstrate its true capacities in practical scenarios. In this paper, an ISAC based outdoor multi-target detection, tracking and localization approach is proposed and validated in 5G networks. The proposed system comprises of 5G base stations (BSs) which serve nearby mobile users normally, while accomplishing the task of detecting, tracking and localizing drones, vehicles and pedestrians simultaneously. Comprehensive trial results demonstrate the relatively high accuracy of the proposed method in practical outdoor environment when tracking and localizing single targets and multiple targets.

cs.IT↗

arXiv2022

Hierarchical Codebook Design for Near-Field MmWave MIMO Communications Systems

Communications system with analog or hybrid analog/digital architectures usually relies on a pre-defined codebook to perform beamforming. With the increase in the size of the antenna array, the characteristics of the spherical wavefront in the near-field situation are not negligible. Therefore, it is necessary to design a codebook that is adaptive to near-field scenarios. In this letter, we investigate the hierarchical codebook design method in the near-field situation. We develop a steering beam gain calculation method and design the lower-layer codebook to satisfy the coverage of the Fresnel region. For the upper-layer codebook, we propose beam rotation and beam relocation methods to place an arbitrary beam pattern at target locations. The simulation results show the superiority of the proposed near-field hierarchical codebook design.

cs.IT↗

arXiv2022

Reconfigurable Intelligent Surface for Near Field Communications: Beamforming and Sensing

Reconfigurable intelligent surface (RIS) can improve the communications between a source and a destination. Recently, continuous aperture RIS is proved to have better communication performance than discrete aperture RIS and has received much attention. However, the conventional continuous aperture RIS is designed to convert the incoming planar waves into the outgoing planar waves, which is not the optimal reflecting scheme when the receiver is not a planar array and is located in the near field of the RIS. In this paper, we consider two types of receivers in the radiating near field of the RIS: (1) when the receiver is equipped with a uniform linear array (ULA), we design RIS coefficient to convert planar waves into cylindrical waves; (2) when the receiver is equipped with a single antenna, we design RIS coefficient to convert planar waves into spherical waves. We then propose the maximum likelihood (ML) method and the focal scanning (FS) method to sense the location of the receiver based on the analytic expression of the reflection coefficient, and derive the corresponding position error bound (PEB). Simulation results demonstrate that the proposed scheme can reduce energy leakage and thus enlarge the channel capacity compared to the conventional scheme. Moreover, the location of the receiver could be accurately sensed by the ML method with large computation complexity or be roughly sensed by the FS method with small computation complexity.

eess.SP↗

arXiv2022

Reconfigurable Intelligent Surfaces for Wireless Communications: Overview of Hardware Designs, Channel Models, and Estimation Techniques

The demanding objectives for the future sixth generation (6G) of wireless communication networks have spurred recent research efforts on novel materials and radio-frequency front-end architectures for wireless connectivity, as well as revolutionary communication and computing paradigms. Among the pioneering candidate technologies for 6G belong the reconfigurable intelligent surfaces (RISs), which are artificial planar structures with integrated electronic circuits that can be programmed to manipulate the incoming electromagnetic field in a wide variety of functionalities. Incorporating RISs in wireless networks has been recently advocated as a revolutionary means to transform any wireless signal propagation environment to a dynamically programmable one, intended for various networking objectives, such as coverage extension and capacity boosting, spatiotemporal focusing with benefits in energy efficiency and secrecy, and low electromagnetic field exposure. Motivated by the recent increasing interests in the field of RISs and the consequent pioneering concept of the RIS-enabled smart wireless environments, in this paper, we overview and taxonomize the latest advances in RIS hardware architectures as well as the most recent developments in the modeling of RIS unit elements and RIS-empowered wireless signal propagation. We also present a thorough overview of the channel estimation approaches for RIS-empowered communications systems, which constitute a prerequisite step for the optimized incorporation of RISs in future wireless networks. Finally, we discuss the relevance of the RIS technology in the latest wireless communication standards, and highlight the current and future standardization activities for the RIS technology and the consequent RIS-empowered wireless networking approaches.

cs.IT↗

arXiv2022

Applications and challenges of Reconfigurable Intelligent Surface for 6G networks

Reconfigurable intelligent surface has attracted the attention of academia and industry as soon as it appears because it can flexibly manipulate the electromagnetic characteristics of wireless channel. Especially in the past one or two years, RIS has been developing rapidly in academic research and industry promotion and is one of the key candidate technologies for 5G-Advanced and 6G networks. RIS can build a smart radio environment through its ability to regulate radio wave transmission in a flexible way. The introduction of RIS may create a new network paradigm, which brings new possibilities to the future network, but also leads to many new challenges in the technological and engineering applications. This paper first introduces the main aspects of RIS enabled wireless communication network from a new perspective, and then focuses on the key challenges faced by the introduction of RIS. This paper briefly summarizes the main engineering application challenges faced by RIS networks, and further analyzes and discusses several key technical challenges among of them in depth, such as channel degradation, network coexistence, network coexistence and network deployment, and proposes possible solutions.

cs.NI↗

arXiv2021

AIRIS: Artificial Intelligence Enhanced Signal Processing in Reconfigurable Intelligent Surface Communications

Reconfigurable intelligent surface (RIS) is an emerging meta-surface that can provide additional communications links through reflecting the signals, and has been recognized as a strong candidate of 6G mobile communications systems. Meanwhile, it has been recently admitted that implementing artificial intelligence (AI) into RIS communications will extensively benefit the reconfiguration capacity and enhance the robustness to complicated transmission environments. Besides the conventional model-driven approaches, AI can also deal with the existing signal processing problems in a data-driven manner via digging the inherent characteristic from the real data. Hence, AI is particularly suitable for the signal processing problems over RIS networks under unideal scenarios like modeling mismatching, insufficient resource, hardware impairment, as well as dynamical transmissions. As one of the earliest survey papers, we will introduce the merging of AI and RIS, called AIRIS, over various signal processing topics, including environmental sensing, channel acquisition, beamforming design, and resource scheduling, etc. We will also discuss the challenges of AIRIS and present some interesting future directions.

eess.SP↗

arXiv2019

Deep Learning based Downlink Channel Prediction for FDD Massive MIMO System

In a frequency division duplexing (FDD) massive multiple-input multiple-output (MIMO) system, the acquisition of downlink channel state information (CSI) at base station (BS) is a very challenging task due to the overwhelming overheads required for downlink training and uplink feedback. In this paper, we reveal a deterministic uplink-to-downlink mapping function when the position-to-channel mapping is bijective. Motivated by the universal approximation theorem, we then propose a sparse complex-valued neural network (SCNet) to approximate the uplink-to-downlink mapping function. Different from general deep networks that operate in the real domain, the SCNet is constructed in the complex domain and is able to learn the complex-valued mapping function by off-line training. After training, the SCNet is used to directly predict the downlink CSI based on the estimated uplink CSI without the need of either downlink training or uplink feedback. Numerical results show that the SCNet achieves better performance than general deep networks in terms of prediction accuracy and exhibits remarkable robustness over complicated wireless channels, demonstrating its great potential for practical deployments.

eess.SP↗

arXiv2019

Beam Squint and Channel Estimation for Wideband mmWave Massive MIMO-OFDM Systems

With the increasing scale of antenna arrays in wideband millimeter-wave (mmWave) communications, the physical propagation delays of electromagnetic waves traveling across the whole array will become large and comparable to the time-domain sample period, which is known as the spatial-wideband effect. In this case, different subcarriers in an orthogonal frequency division multiplexing (OFDM) system will "see" distinct angles of arrival (AoAs) for the same path. This effect is known as beam squint, resulting from the spatial-wideband effect, and makes the approaches based on the conventional multiple-input multiple-output (MIMO) model, such as channel estimation and precoding, inapplicable. After discussing the relationship between beam squint and the spatial-wideband effect, we propose a channel estimation scheme for frequency-division duplex (FDD) mmWave massive MIMO-OFDM systems with hybrid analog/digital precoding, which takes the beam squint effect into consideration. A super-resolution compressed sensing approach is developed to extract the frequency-insensitive parameters of each uplink channel path, i.e., the AoA and the time delay, and the frequency-sensitive parameter, i.e., the complex channel gain. With the help of the reciprocity of these frequency-insensitive parameters in FDD systems, the downlink channel estimation can be greatly simplified, where only limited pilots are needed to obtain downlink complex gains and reconstruct downlink channels. Furthermore, the uplink and downlink channel covariance matrices can be constructed from these frequency-insensitive channel parameters rather than through a long-term average, which enables the minimum mean-squared error (MMSE) channel estimation to further enhance performance. Numerical results demonstrate the superiority of the proposed scheme over the conventional methods in mmWave communications.

cs.IT↗