arXiv subjects

Mengting Jiang

Publications and source records attributed to Mengting Jiang.

7 recordsLinked to original sources

arXiv2026

Twist Engineering for Reconfigurable Optical and Optoelectronic Devices

Reconfigurable optical and optoelectronic devices require compact tuning mechanisms capable of reshaping electronic, excitonic, polaritonic, and photonic responses without rebuilding the underlying nanostructure. Against this backdrop, twist has emerged as a powerful geometric degree of freedom that reconfigures interlayer coupling, momentum matching, symmetry, radiation channels, and chiral response by simply rotating adjacent two-dimensional layers or photonic lattices. In this Review, we survey twist-engineered optical and optoelectronic devices spanning van der Waals materials and photonic platforms. We first review the current landscape of twist-angle metrology, classifying existing characterization approaches into three complementary categories: direct structural imaging, methods based on moir\'e periodicity and morphological features, and techniques that infer the twist angle from spectroscopic or electronic responses. We then survey the principal technological routes for twist-angle control, including deterministic transfer and growth strategies, atomic force microscopy (AFM)-assisted manipulation, quantum twisting microscopy (QTM), microelectromechanical systems (MEMS), and emerging non-contact approaches, highlighting their respective capabilities, limitations, and prospects for programmable and scalable moir\'e photonic platforms. Finally, we discuss the future evolution of twist engineering from the fabrication of individual twisted structures toward dynamically reconfigurable, feedback-controlled, and manufacturable photonic systems. We further highlight MEMS-based rotation, piezoelectric actuation, and micro-LiDAR as representative enabling technologies and emerging applications within this broader landscape.

physics.optics↗

arXiv2026

Room-Temperature Noncolinear Ferroelectricity in van der Waals WO$_2$Cl$_2$ with a Wide Bandgap

Low-dimensional ferroelectrics are attractive for their promising prospects in nanoelectronics. Compared with widely-used ferroelectric perovskites, most low-dimensional ferroelectrics exhibit several inborn weaknesses such as small bandgaps (mostly <2 eV, i.e. semiconductors-like) or faint polarizations (e.g. $<1$ $\mu$C/cm$^2$ for sliding ferroelectrics even if their bandgaps can be large). Here we experimentally demonstrate the room-temperature ferroelectricity of van der Waals WO$_2$Cl$_2$ . The well-tested d0 rule inherited from ferroelectric perovskites leads to a large dipole (~3 e\AA) from the off-center displacement of W$^6+$ ion and a wide bandgap of 2.80 eV. Its ferroelectricity is proved by multiple characterizations including second harmonic generation, piezoresponse force microscopy, and ferroelectric hysteresis loops. More interestingly, the exotic noncollinear dipole order is directly observed at the atomic level by integrated differential phase contrast scanning transmission electron microscopy. Our work paves an alternative route for low-dimensional ferroelectrics to pursue excellent ferroelectric performance and distinct physics of polarity.

cond-mat.mtrl-sci↗

arXiv2026

In-Line Fiber-Integrated Photon-Pair Generation from van der Waals Crystals

Miniaturized quantum light sources that operate directly in optical fibers are an attractive platform for optical quantum technologies. However, most miniaturized spontaneous parametric down- conversion (SPDC) sources still rely on objective-lens-based free-space pumping and collection, which limits compactness, robustness, and direct compatibility with fiber-based systems. Here we demonstrate a lens-free in-line SPDC photon-pair source by integrating a van der Waals NbOI2 flake directly onto the end facet of an optical fiber. In this configuration, the generated photon- pairs are efficiently collected into optical fibers, eliminating the need for bulk free-space collection optics. Despite the limited numerical aperture of the single-mode fiber, efficient photon-pair collection with high purity, characterized by a coincidence-to-accidental ratio of up to ~4600, is achieved in an ultracompact configuration. These results establish van der Waals ferroelectric materials as a promising platform for fiber-integrated quantum light sources and provide a pathway toward compact, alignment-free quantum photonic devices.

quant-ph↗

arXiv2026

Probing mesoscopic nonlocal screening in van der Waals heterostructures with polaritons

Predictive optical modelling of van der Waals (vdW) heterostructures is critical for meta-optics, near-field photonics and quantum technologies. At their buried interfaces, charge transfer and spatially extended screening challenge local descriptions based on layer-by-layer stacking of fixed permittivity tensors. However, such nonlocal corrections have been established mainly for plasmonic systems at {\aa}ngstr\"om-nanometre scales and are often assumed negligible on optical-wavelength scales. Here we challenge this view by uncovering a mesoscopic nonlocal screening regime, extending up to ~140 nm, at buried charge-transfer interfaces in transition-metal dichalcogenide/{\alpha}-molybdenum trioxide (TMDC/{\alpha}-MoO3) phonon-polaritonic heterostructures. Using phonon polaritons as an ultrasensitive probe, we quantify charge transfer from polariton-wavelength shifts and find a thickness-independent saturated response as {\alpha}-MoO3 is thinned. Rather than merely complicating optical modelling, this nonlocal saturation turns a design-level correction into an opportunity by yielding a transferable cross-material metric. Across more than 120 devices, this metric scales linearly with the work-function difference between the TMDC and {\alpha}-MoO3. We further identify a lattice-mismatch-set energy threshold for charge transfer, revising Anderson-type band alignment for vdW interfaces.

physics.optics↗

arXiv2026

Air-stable bright entangled photon-pair source from graphene-encapsulated van der Waals ferroelectric NbOI2

Van der Waals (vdW) ferroelectrics are emerging nonlinear photonic materials that combine large second-order susceptibility \c{hi}(2) with heterostructure compatibility, offering an attractive route toward miniaturized spontaneous parametric down-conversion (SPDC) sources. However, vdW SPDC sources operating under continuous irradiation in air remain limited in low brightness and poor operational stability, as oxygen and moisture exposure, together with pump-induced heating, lead to material degradation and permanent damage. Here we demonstrate an air-stable, bright SPDC source based on ferroelectric NbOI2 enabled by graphene encapsulation. Graphene provides robust environmental protection and can effectively supress pump induced degradation by enhancing heat dissipation. We report a record photon-pair generation absolute rate of 258 Hz and a normalized brightness of 19,900 Hz/(mW.mm). Leveraging this stabilized platform, we further generate polarization entangled photon pairs with 94% fidelity with respect to the maximally entangled Bell states from graphene-encapsulated 90{\deg} twisted bilayer NbOI2. Our results establish a practical and air-stable vdW ferroelectric SPDC platform that overcomes key limitations of existing vdW quantum light sources and provides a viable pathway toward scalable, integrated entangled photon sources for on chip quantum photonics.

physics.app-ph↗

arXiv2022

A reduced-order model for dynamic simulation of district heating networks

This study concerns the development of a data-based compact model for the prediction of the fluid temperature evolution in district heating (DH) pipeline networks. This so-called "reduced-order model" (ROM) is obtained from reduction of the conservation law for energy for each pipe segment to a semi-analytical input-output relation between the pipe outlet temperature and the pipe inlet and ground temperatures that can be identified from training data. The ROM basically is valid for generic pipe configurations involving 3D unsteady heat transfer and 3D steady flow as long as heat-transfer mechanisms are linearly dependent on the temperature field. Moreover, the training data can be generated by physics-based computational "full-order" models (FOMs) yet also by (calibration) experiments or field measurements. Performance tests using computational training data for a single 1D pipe configuration demonstrate that the ROM (i) can be successfully identified and (ii) can accurately describe the response of the outlet temperature to arbitrary input profiles for inlet and ground temperatures. Application of the ROM to two case studies, i.e. fast simulation of a small DH network and design of a controller for user-defined temperature regulation of a DH system, demonstrate its predictive ability and efficiency also for realistic systems. Dedicated cost analyses further reveal that the ROM may significantly reduce the computational costs compared to FOMs by (up to) orders of magnitude for higher-dimensional pipe configurations. These findings advance the proposed ROM as a robust and efficient simulation tool for practical DH systems with a far greater predictive ability than existing compact models.

math.NA↗

arXiv2022

Stable and Solution-Processable Cumulenic sp-Carbon Wires: A New Paradigm for Organic Electronics

Solution-processed, large-area, and flexible electronics largely relies on the excellent electronic properties of sp$^2$-hybridized carbon molecules, either in the form of $π$-conjugated small molecules and polymers or graphene and carbon nanotubes. Carbon with sp-hybridization, the foundation of the elusive allotrope carbyne, offers vast opportunities for functionalized molecules in the form of linear carbon atomic wires (CAWs), with intriguing and even superior predicted electronic properties. While CAWs represent a vibrant field of research, to date, they have only been applied sparingly to molecular devices. The recent observation of the field-effect in microcrystalline cumulenes suggests their potential applications in solution-processed thin-film transistors but concerns surrounding the stability and electronic performance have precluded developments in this direction. In the present study, ideal field-effect characteristics are demonstrated for solution-processed thin films of tetraphenyl[3]cumulene, the shortest semiconducting CAW. Films are deposited through a scalable, large-area, meniscus-coating technique, providing transistors with hole mobilities in excess of 0.1 cm$^2$ V$^{-1}$ s$^{-1}$, as well as promising operational stability under dark conditions. These results offer a solid foundation for the exploitation of a vast class of molecular semiconductors for organic electronics based on sp-hybridized carbon systems and create a previously unexplored paradigm.

cond-mat.mtrl-sci↗