arXiv subjects

Mengxi Tan

Publications and source records attributed to Mengxi Tan.

At least 19 recordsLinked to original sources

arXiv2024

Photonic real-time signal processing

The simultaneous progress of integrated optical frequency comb (OFC) and radio frequency (RF) photonic signal processing technique have promoted the rapid development of real-time signal processing. Integrated optical frequency comb offer multiple wavelengths as a powerful source for RF photonic signal transversal filter. Here, we review development of real-time signal processing system consisting of integrated OFC and RF photonic signal transversal filter in chronological order, and focus on the applications of this system such as differentiator, integrator, Hilbert transformer, and image processor. We also discuss and present our outlook on more parallel functions and further integration of real-time signal processing system.

physics.optics↗

arXiv2024

Turnkey deterministic soliton crystal generation

The deterministic generation of robust soliton comb has significant meaning for the optical frequency combs to be widely used in various applications. As a novel form of microcomb, Soliton crystal holds the advantages of easy generation, high conversion efficiency, and excellent thermal robustness. Here, we report the turnkey deterministic generation of "Palm-like" soliton crystal with a free-running scheme. The robustness of the turnkey soliton crystal generation is also investigated in multiple aspects, including the success rate, the thermal robustness, and the long-term stability. The experiment results reveal our turnkey soliton crystal can achieve nearly a 100% success rate with a power variation less than 1.5 dB over one hundred trials of two samples, is insensitive to thermal effect, and is robust to the environment during four-hour laboratory time.

physics.optics↗

arXiv2024

Photonic RF Channelization Based on Microcombs

In recent decades, microwave photonic channelization techniques have developed significantly. Characterized by low loss, high versatility, large instantaneous bandwidth, and immunity to electromagnetic interference, microwave photonic channelization addresses the requirements of modern radar and electronic warfare for receivers. Microresonator-based optical frequency combs are promising devices for photonic channelized receivers, enabling full advantage of multicarriers, large bandwidths, and accelerating the integration process of microwave photonic channelized receivers. In this paper, we review the research progress and trends in microwave photonic channelization, focusing on schemes that utilize integrated microcombs. We discuss the potential of microcomb-based RF channelization, as well as their challenges and limitations, and provide perspectives for their future development in the context of on-chip silicon-based photonics.

physics.optics↗

arXiv2024

Photonic real time video image signal processor at 17Tb/s based on a Kerr microcomb

Signal processing has become central to many fields, from coherent optical telecommunications, where it is used to compensate signal impairments, to video image processing. Image processing is particularly important for observational astronomy, medical diagnosis, autonomous driving, big data and artificial intelligence. For these applications, signal processing traditionally has mainly been performed electronically. However these, as well as new applications, particularly those involving real time video image processing, are creating unprecedented demand for ultrahigh performance, including high bandwidth and reduced energy consumption. Here, we demonstrate a photonic signal processor operating at 17 Terabits/s and use it to process video image signals in real-time. The system processes 400,000 video signals concurrently, performing 34 functions simultaneously that are key to object edge detection, edge enhancement and motion blur. As compared with spatial-light devices used for image processing, our system is not only ultra-high speed but highly reconfigurable and programable, able to perform many different functions without any change to the physical hardware. Our approach is based on an integrated Kerr soliton crystal microcomb, and opens up new avenues for ultrafast robotic vision and machine learning.

physics.optics↗

arXiv2023

Microwave photonic filters via radio frequency bandwidth scaling based on soliton crystal optical micro-combs

We demonstrate high-resolution photonic RF filters using an RF bandwidth scaling approach based on integrated Kerr optical micro-combs. By employing both an active nonlinear micro-ring resonator (MRR) as a high-quality micro-comb source and a passive high-Q MRR to slice the shaped comb, a large RF instantaneous bandwidth of 4.64 GHz and a high resolution of 117 MHz are achieved, together with a broad RF operation band covering 3.28 to 19.4 GHz (L to Ku bands) using thermal tuning. We achieve programmable RF transfer functions including binary-coded notch filters and RF equalizing filters with reconfigurable slopes. Our approach is an attractive solution for high performance RF spectral shaping with high performance and flexibility.

physics.app-ph↗

arXiv2023

Maximizing the performance for microcomb based microwave photonic transversal signal processors

Microwave photonic (MWP) transversal signal processors offer a compelling solution for realizing versatile high-speed information processing by combining the advantages of reconfigurable electrical digital signal processing and high-bandwidth photonic processing. With the capability of generating a number of discrete wavelengths from micro-scale resonators, optical microcombs are powerful multi-wavelength sources for implementing MWP transversal signal processors with significantly reduced size, power consumption, and complexity. By using microcomb-based MWP transversal signal processors, a diverse range of signal processing functions have been demonstrated recently. In this paper, we provide a detailed analysis for the processing inaccuracy that is induced by the imperfect response of experimental components. First, we investigate the errors arising from different sources including imperfections in the microcombs, the chirp of electro-optic modulators, chromatic dispersion of the dispersive module, shaping errors of the optical spectral shapers, and noise of the photodetector. Next, we provide a global picture quantifying the impact of different error sources on the overall system performance. Finally, we introduce feedback control to compensate the errors caused by experimental imperfections and achieve significantly improved accuracy. These results provide a guide for optimizing the accuracy of microcomb-based MWP transversal signal processors.

eess.SP↗

arXiv2023

Applications of integrated optical microcombs

Optical microcombs represent a new paradigm for generating laser frequency combs based on compact chip-scale devices, which have underpinned many modern technological advances for both fundamental science and industrial applications. Along with the surge in activity related to optical micro-combs in the past decade, their applications have also experienced rapid progress, not only in traditional fields such as frequency synthesis, signal processing, and optical communications, but also in new interdisciplinary fields spanning the frontiers of light detection and ranging (LiDAR), astronomical detection, neuromorphic computing, and quantum optics. This paper reviews the applications of optical microcombs. First, an overview of the devices and methods for generating optical microcombs is provided, which are categorized into material platforms, device architectures, soliton classes, and driving mechanisms. Second, the broad applications of optical microcombs are systematically reviewed, which are categorized into microwave photonics, optical communications, precision measurements, neuromorphic computing, and quantum optics. Finally, the current challenges and future perspectives are discussed.

physics.optics↗

arXiv2022

Spatio-temporal isolator in lithium niobate on insulator

In this contribution, we simulate, design, and experimentally demonstrate an integrated optical isolator based on spatiotemporal modulation in the thin-film lithium niobate on insulator waveguide platform. We used two cascaded travelling wave phase modulators for spatiotemporal modulation and a ring resonator as a wavelength filter to suppress the sidebands of the reverse propagating light. This enabled us to achieve an isolation of 27 dB. The demonstrated suppression of the reverse propagating light makes such isolators suitable for the integration with III-V laser diodes and Erbium doped gain sections in the thin-film lithium niobate on insulator waveguide platform.

physics.optics↗

arXiv2022

Neuromorphic computing using wavelength-division multiplexing

Optical neural networks (ONNs), or optical neuromorphic hardware accelerators, have the potential to dramatically enhance the computing power and energy efficiency of mainstream electronic processors, due to their ultralarge bandwidths of up to 10s of terahertz together with their analog architecture that avoids the need for reading and writing data back and forth. Different multiplexing techniques have been employed to demonstrate ONNs, amongst which wavelength division multiplexing (WDM) techniques make sufficient use of the unique advantages of optics in terms of broad bandwidths. Here, we review recent advances in WDM based ONNs, focusing on methods that use integrated microcombs to implement ONNs. We present results for human image processing using an optical convolution accelerator operating at 11 Tera operations per second. The open challenges and limitations of ONNs that need to be addressed for future applications are also discussed.

physics.optics↗

arXiv2022

Recirculating Light Phase Modulator

High efficiency and a compact footprint are desired properties for electro-optic modulators. In this paper, we propose, theoretically investigate and experimentally demonstrate a recirculating phase modulator, which increases the modulation efficiency by modulating the optical field several times in a non-resonant waveguide structure. The 'recycling' of light is achieved by looping the optical path that exits the phase modulator back and coupling it to a higher order waveguide mode, which then repeats its passage through the phase modulator. By looping the light back twice, we were able to demonstrate a recirculating phase modulator that requires nine times lower power to generate the same modulation index of a single pass phase modulator. This approach of modulation efficiency enhancement is promising for the design of advanced tunable electro optical frequency comb generators and other electro-optical devices with defined operational frequency bandwidths.

physics.optics↗

arXiv2022

Phase-encoded RF signal generation based on an integrated 49GHz micro-comb optical source

We demonstrate photonic RF phase encoding based on an integrated micro-comb source. By assembling single-cycle Gaussian pulse replicas using a transversal filtering structure, phase encoded waveforms can be generated by programming the weights of the wavelength channels. This approach eliminates the need for RF signal generators for RF carrier generation or arbitrary waveform generators for phase encoded signal generation. A large number of wavelengths of up to 60 were provided by the microcomb source, yielding a high pulse compression ratio of 30. Reconfigurable phase encoding rates ranging from 2 to 6 Gb/s were achieved by adjusting the length of each phase code. This work demonstrates the significant potentials of this microcomb-based approach to achieve high-speed RF photonic phase encoding with low cost and footprint.

physics.app-ph↗

arXiv2021

Integral order photonic RF and microwave signal processors based on soliton crystal Kerr micro-combs

Soliton crystal micro-combs are powerful tools as sources of multiple wavelength channels for radio frequency (RF) signal processing. They offer a compact device footprint, large numbers of wavelengths, very high versatility, and wide Nyquist bandwidths. Here, we demonstrate integral order RF signal processing functions based on a soliton crystal micro-comb, including a Hilbert transformer and first- to third-order differentiators. We compare and contrast results achieved and the tradeoffs involved with varying comb spacing, tap design methods, as well as shaping methods.

physics.app-ph↗

arXiv2021

Frequency comb distillation for optical superchannel transmission

Optical frequency combs can potentially provide an efficient light source for multi-terabit-per-second optical superchannels. However, as the bandwidth of these multi-wavelength light sources is increased, it can result in low per-line power. Optical amplifiers can be used to overcome power limitations, but the accompanying spontaneous optical noise can degrade performance in optical systems. To overcome this, we demonstrate wideband noise reduction for comb lines using a high-Q microring resonator whose resonances align with the comb lines, providing tight optical filtering of multiple combs lines at the same time. By distilling an optical frequency comb in this way, we are able to reduce the required comb line OSNR when these lines are used in a coherent optical communications system. Through performance tests on a 19.45-GHz-spaced comb generating 71 lines, using 18 Gbaud, 64-QAM sub-channels at a spectral efficiency of 10.6 b/s/Hz, we find that noise-corrupted comb lines can reduce the optical signal-to-noise ratio required for the comb by ~ 9 dB when used as optical carriers at the transmitter side, and by ~ 12 dB when used as a local oscillator at the receiver side. This demonstration provides a method to enable low power optical frequency combs to be able to support high bandwidth and high-capacity communications.

physics.app-ph↗

arXiv2021

Highly tunable broadband RF photonic fractional Hilbert transformer based on a Kerr soliton crystal microcomb source

We demonstrate an RF photonic fractional Hilbert transformer based on an integrated Kerr micro-comb source featuring a record low free spectral range of 48.9 GHz, yielding 75 microcomb lines across the C-band. By programming and shaping the comb lines according to calculated tap weights, we demonstrate that the Hilbert transformer can achieve tunable bandwidths ranging from 1.2 to 15.3 GHz, switchable centre frequencies from baseband to 9.5 GHz, and arbitrary fractional orders. We experimentally characterize the RF amplitude and phase response of the tunable bandpass and lowpass Hilbert transformers with 90 and 45-degree phase shift. The experimental results show good agreement with theory, confirming the effectiveness of our approach as a powerful way to implement the standard as well as fractional Hilbert transformers with broad and switchable processing bandwidths and centre frequencies, together with high reconfigurability and greatly reduced size and complexity.

physics.app-ph↗

arXiv2021

Photonic single perceptron at Giga-OP/s speeds with Kerr microcombs for scalable optical neural networks

Optical artificial neural networks (ONNs) have significant potential for ultra-high computing speed and energy efficiency. We report a novel approach to ONNs that uses integrated Kerr optical microcombs. This approach is programmable and scalable and is capable of reaching ultrahigh speeds. We demonstrate the basic building block ONNs, a single neuron perceptron, by mapping synapses onto 49 wavelengths to achieve an operating speed of 11.9 x 109 operations per second, or GigaOPS, at 8 bits per operation, which equates to 95.2 gigabits/s (Gbps). We test the perceptron on handwritten digit recognition and cancer cell detection, achieving over 90% and 85% accuracy, respectively. By scaling the perceptron to a deep learning network using off the shelf telecom technology we can achieve high throughput operation for matrix multiplication for real-time massive data processing.

eess.SP↗

arXiv2021

Optical neuromorphic processing at Tera-OP/s speeds based on Kerr soliton crystal microcombs

Convolutional neural networks (CNNs), inspired by biological visual cortex systems, are a powerful category of artificial neural networks that can extract the hierarchical features of raw data to greatly reduce the network parametric complexity and enhance the predicting accuracy. They are of significant interest for machine learning tasks such as computer vision, speech recognition, playing board games and medical diagnosis. Optical neural networks offer the promise of dramatically accelerating computing speed to overcome the inherent bandwidth bottleneck of electronics. Here, we demonstrate a universal optical vector convolutional accelerator operating beyond 10 TeraOPS (TOPS: operations per second), generating convolutions of images of 250,000 pixels with 8 bit resolution for 10 kernels simultaneously, enough for facial image recognition. We then use the same hardware to sequentially form a deep optical CNN with ten output neurons, achieving successful recognition of full 10 digits with 900 pixel handwritten digit images with 88% accuracy. Our results are based on simultaneously interleaving temporal, wavelength and spatial dimensions enabled by an integrated microcomb source. This approach is scalable and trainable to much more complex networks for demanding applications such as unmanned vehicle and real time video recognition.

cs.ET↗

arXiv2021

Photonic Microwave and RF Channelizers using Kerr Micro-combs

We review recent work on broadband RF channelizers based on integrated optical frequency Kerr micro-combs combined with passive micro-ring resonator filters, with microcombs having channel spacings of 200GHz and 49GHz. This approach to realizing RF channelizers offers reduced complexity, size, and potential cost for a wide range of applications to microwave signal detection.

physics.app-ph↗

arXiv2021

High bandwidth temporal RF photonic signal processing with Kerr micro-combs: integration, fractional differentiation and Hilbert transforms

Integrated Kerr micro-combs, a powerful source of many wavelengths for photonic RF and microwave signal processing, are particularly useful for transversal filter systems. They have many advantages including a compact footprint, high versatility, large numbers of wavelengths, and wide bandwidths. We review recent progress on photonic RF and microwave high bandwidth temporal signal processing based on Kerr micro-combs with spacings from 49-200GHz. We cover integral and fractional Hilbert transforms, differentiators as well as integrators. The potential of optical micro-combs for RF photonic applications in functionality and ability to realize integrated solutions is also discussed.

physics.app-ph↗