arXiv subjects
Publications and source records attributed to Menno van den Hout.
Angular resolved digital holography is presented as a technique for real-time characterization of the full optical field (amplitude and phase) of space-division multiplexing components and fibers, here a 6-mode photonic-lantern is characterized.
The increase in capacity provided by coupled SDM systems is fundamentally limited by MDG and ASE noise. Therefore, monitoring MDG and optical SNR is essential for accurate performance evaluation and troubleshooting. Recent works show that the conventional MDG estimation method based on the transfer matrix of MIMO equalizers optimizing the MMSE underestimates the actual value at low SNR. Besides, estimating the optical SNR itself is not a trivial task in SDM systems, as MDG strongly influences the electrical SNR after the equalizer. In a recent work we propose an MDG and SNR estimation method using ANN. The proposed ANN-based method processes features extracted at the receiver after DSP. In this paper, we discuss the ANN-based method in detail, and validate it in an experimental 73-km 3-mode transmission link with controlled MDG and SNR. After validation, we apply the method in a case study consisting of an experimental long-haul 6-mode link. The results show that the ANN estimates both MDG and SNR with high accuracy, outperforming conventional methods.
A Kramers-Kronig receiver with a continuous wave tone added digitally at the transmitter is combined with a digital resolution enhancer to limit the increase in transmitter quantization noise. Performance increase is demonstrated, as well as the ability to reduce the number of bits in the digital-to-analog converter.
We propose a neural network model for MDG and optical SNR estimation in SDM transmission. We show that the proposed neural-network-based solution estimates MDG and SNR with high accuracy and low complexity from features extracted after DSP.
We propose a new four-dimensional orthant-symmetric 128-ary modulation format (4D-OS128) with a spectral efficiency of 7bit/4D-sym. The proposed format fills the gap between polarization-multiplexed 8- and 16-ary quadrature-amplitude modulation (PM-8QAM and PM-16QAM).Numerical simulations show that 4D-OS128 outperforms two well-studied 4D geometrically-shaped modulation formats: 128SP-16QAM and 7b4D-2A8PSK by up to 0.65dB for bit-interleaved coded modulation at the same spectral efficiency. These gains are experimentally demonstrated in a 11$\times$233Gbit/s wavelength division multiplexing (WDM) transmission system operating at 5.95 bit/4D-sym over 6000km and 9000km for both EDFA-only and hybrid amplification scenarios, respectively. A reach increase of 15% is achieved with respect to 128-ary set-partitioning 16QAM. Furthermore, the proposed 4D-OS128 is also compared to $\boldsymbol{D}_4$ lattice-based constellation and probabilistically-shaped 16QAM with finite blocklength via simulation.
We demonstrate 1 Tbit/s/$λ$ single-span transmission over a heterogeneous link consisting of graded-index 50 $μ$m core multi-mode fiber and 6LP few-mode fiber using a Kramers-Kronig receiver structure. Furthermore, the link budget increase by transmitting only three modes while employing more than three receivers is investigated.
We experimentally validate a mode-dependent loss (MDL) estimation technique employing acorrection factor to remove the MDL estimation dependence on the SNR when using a minimum meansquare error (MMSE) equalizer. A reduction of the MDL estimation error is observed for both transmitter-side and in-span MDL emulation.
Digital holography measures the complex optical field and transfer matrix of a device, polarization-diversity is often achieved through spatial multiplexing. We introduce angular multiplexing, to increase flexibility in the optical setup. Comparatively, similar values for cross-talk and mode-dependent loss are measured for a photonic lantern.
The capacity in space division multiplexing (SDM) systems with coupled channels is fundamentally limited by mode-dependent loss (MDL) and mode-dependent gain (MDG) generated in components and amplifiers. In these systems, MDL/MDG must be accurately estimated for performance analysis and troubleshooting. Most recent demonstrations of SDM with coupled channels perform MDL/MDG estimation by digital signal processing (DSP) techniques based on the coefficients of multiple-input multiple-output (MIMO) adaptive equalizers. Although these methods provide a valid indication of the order of magnitude of the accumulated MDL/MDG over the link, MIMO equalizers are usually updated according to the minimum mean square error (MMSE) criterion, which is known to depend on the channel signal-to-noise ratio (SNR). Therefore, MDL/MDG estimation techniques based on the adaptive filter coefficients are also impaired by noise. In this paper, we model analytically the influence of the SNR on DSP-based MDL/MDG estimation, and show that the technique is prone to errors. Based on the transfer function of MIMO MMSE equalizers, and assuming a known SNR, we calculate a correction factor that improves the estimation process in moderate levels of MDL/MDG and SNR. The correction factor is validated by simulation of a 6-mode long-haul transmission link, and experimentally using a 3-mode transmission link. The results confirm the limitations of the standard estimation method in scenarios of high additive noise and MDL/MDG, and indicate the correction factor as a possible solution in practical SDM scenarios.
Efficient nonlinearity compensation in fiber-optic communication systems is considered a key element to go beyond the "capacity crunch''. One guiding principle for previous work on the design of practical nonlinearity compensation schemes is that fewer steps lead to better systems. In this paper, we challenge this assumption and show how to carefully design multi-step approaches that provide better performance--complexity trade-offs than their few-step counterparts. We consider the recently proposed learned digital backpropagation (LDBP) approach, where the linear steps in the split-step method are re-interpreted as general linear functions, similar to the weight matrices in a deep neural network. Our main contribution lies in an experimental demonstration of this approach for a 25 Gbaud single-channel optical transmission system. It is shown how LDBP can be integrated into a coherent receiver DSP chain and successfully trained in the presence of various hardware impairments. Our results show that LDBP with limited complexity can achieve better performance than standard DBP by using very short, but jointly optimized, finite-impulse response filters in each step. This paper also provides an overview of recently proposed extensions of LDBP and we comment on potentially interesting avenues for future work.
We transmit probabilistic enumerative sphere shaped dual-polarization 64-QAM at 350Gbit/s/channel over 1610km SSMF using a short blocklength of 200. A reach increase of 15% over constant composition distribution matching with identical blocklength is demonstrated.
Two novel 5.5 bit/4D modulation formats are experimentally demonstrated to transmit over 9680 km of SSMF. A reach increase of 29.4% over the 6 bit/4D PM-8QAM is shown. Furthermore, increased nonlinear tolerance with respect to PM-8QAM is shown.
Using a novel geometrically-shaped four-dimensional modulation format, we transmitted 11x200 Gbit/s DWDM at 4.8 bit/4D-sym over 7,925 km and 11,700 km using EDFA-only and hybrid amplification, respectively. A reach increase of 16% is achieved over PM-8QAM.