arXiv subjects

Meysam Masoudi

Publications and source records attributed to Meysam Masoudi.

17 recordsLinked to original sources

arXiv2026

Holistic Energy Performance Management: Enablers, Capabilities, and Features

Energy consumption is a significant concern for mobile network operators, and to enable further network energy improvements it is also an important target when developing the emerging 6G standard. In this paper we show that, despite the existence of many energy-saving features in 5G new radio (NR) networks, activating them in isolation yields only suboptimal savings and often compromises other network key performance indicators (KPIs) such as coverage or latency. We first introduce a compact taxonomy that distinguishes hardware capabilities from higher-layer features. Features fall into two classes: (i) signaling and scheduling mechanisms that create idle windows, and (ii) features that utilize those windows to save energy. We then present a feature orchestrator as a logical node to coordinate between features to maximize the gain. Using a 3GPP-aligned simulator with product-realistic parameters, we show that coordinating lean NR, scheduling, and advanced sleep modes significantly reduces gNodeB (gNB) energy consumption with negligible throughput loss, compared to the uncoordinated scenario. We conclude by outlining open issues in observability, system dynamics, coordination, and intelligent automation for energy performance management.

cs.NI↗

arXiv2026

Collective Grid: Privacy-Preserved Multi-Operator Energy Sharing Optimization via Federated Energy Prediction

Electricity consumption in mobile networks is increasing with the continued 5G expansion, rising data traffic, and more complex infrastructures. However, energy management is often handled independently by each mobile network operator (MNO), leading to limited coordination and missed opportunities for collective efficiency gains. To address this gap, we propose a privacy-preserving framework for automated energy infrastructure sharing among co-located MNOs. Our framework consists of three modules: (i) a federated learning-based privacy-preserving site energy consumption forecasting module, (ii) an orchestration module in which a mixed-integer linear program is solved to schedule energy purchases from the grid, utilization of renewable sources, and shared battery charging or discharging, based on real-time prices, forecasts, and battery state, and (iii) an energy source selection module which handles the selection of cost-effective power sources and storage actions based on predicted demand across MNOs for the next control window. Using data from operational networks, our experiments confirm that the proposed solution substantially reduces operational costs and outperforms non-sharing baselines, with gains that increase as network density rises in 5G-and-beyond deployments.

eess.SY↗

arXiv2026

Asynchronous MultiAgent Reinforcement Learning for 5G Routing under Side Constraints

Networks in the current 5G and beyond systems increasingly carry heterogeneous traffic with diverse quality-of-service constraints, making real-time routing decisions both complex and time-critical. A common approach, such as a heuristic with human intervention or training a single centralized RL policy or synchronizing updates across multiple learners, struggles with scalability and straggler effects. We address this by proposing an asynchronous multi-agent reinforcement learning (AMARL) framework in which independent PPO agents, one per service, plan routes in parallel and commit resource deltas to a shared global resource environment. This coordination by state preserves feasibility across services and enables specialization for service-specific objectives. We evaluate the method on an O-RAN like network simulation using nearly real-time traffic data from the city of Montreal. We compared against a single-agent PPO baseline. AMARL achieves a similar Grade of Service (acceptance rate) (GoS) and end-to-end latency, with reduced training wall-clock time and improved robustness to demand shifts. These results suggest that asynchronous, service-specialized agents provide a scalable and practical approach to distributed routing, with applicability extending beyond the O-RAN domain.

cs.NI↗

arXiv2025

QoS-Aware Dynamic CU Selection in O-RAN with Graph-Based Reinforcement Learning

Open Radio Access Network (O RAN) disaggregates conventional RAN into interoperable components, enabling flexible resource allocation, energy savings, and agile architectural design. In legacy deployments, the binding between logical functions and physical locations is static, which leads to inefficiencies under time varying traffic and resource conditions. We address this limitation by relaxing the fixed mapping and performing dynamic service function chain (SFC) provisioning with on the fly O CU selection. We formulate the problem as a Markov decision process and solve it using GRLDyP, i.e., a graph neural network (GNN) assisted deep reinforcement learning (DRL). The proposed agent jointly selects routes and the O-CU location (from candidate sites) for each incoming service flow to minimize network energy consumption while satisfying quality of service (QoS) constraints. The GNN encodes the instantaneous network topology and resource utilization (e.g., CPU and bandwidth), and the DRL policy learns to balance grade of service, latency, and energy. We perform the evaluation of GRLDyP on a data set with 24-hour traffic traces from the city of Montreal, showing that dynamic O CU selection and routing significantly reduce energy consumption compared to a static mapping baseline, without violating QoS. The results highlight DRL based SFC provisioning as a practical control primitive for energy-aware, resource-adaptive O-RAN deployments.

cs.NI↗

arXiv2024

Telecom Foundation Models: Applications, Challenges, and Future Trends

Telecom networks are becoming increasingly complex, with diversified deployment scenarios, multi-standards, and multi-vendor support. The intricate nature of the telecom network ecosystem presents challenges to effectively manage, operate, and optimize networks. To address these hurdles, Artificial Intelligence (AI) has been widely adopted to solve different tasks in telecom networks. However, these conventional AI models are often designed for specific tasks, rely on extensive and costly-to-collect labeled data that require specialized telecom expertise for development and maintenance. The AI models usually fail to generalize and support diverse deployment scenarios and applications. In contrast, Foundation Models (FMs) show effective generalization capabilities in various domains in language, vision, and decision-making tasks. FMs can be trained on multiple data modalities generated from the telecom ecosystem and leverage specialized domain knowledge. Moreover, FMs can be fine-tuned to solve numerous specialized tasks with minimal task-specific labeled data and, in some instances, are able to leverage context to solve previously unseen problems. At the dawn of 6G, this paper investigates the potential opportunities of using FMs to shape the future of telecom technologies and standards. In particular, the paper outlines a conceptual process for developing Telecom FMs (TFMs) and discusses emerging opportunities for orchestrating specialized TFMs for network configuration, operation, and maintenance. Finally, the paper discusses the limitations and challenges of developing and deploying TFMs.

cs.NI↗

arXiv2024

Cell-Free Massive MIMO in O-RAN: Energy-Aware Joint Orchestration of Cloud, Fronthaul, and Radio Resources

For the energy-efficient deployment of cell-free massive MIMO functionality in a practical wireless network, the end-to-end (from radio site to the cloud) energy-aware operation is essential. In line with the cloudification and virtualization in the open radio access networks (O-RAN), it is indisputable to envision prospective cell-free infrastructure on top of the O-RAN architecture. In this paper, we explore the performance and power consumption of cell-free massive MIMO technology in comparison with traditional small-cell systems, in the virtualized O-RAN architecture. We compare two different functional split options and different resource orchestration mechanisms. In the end-to-end orchestration scheme, we aim to minimize the end-to-end power consumption by jointly allocating the radio, optical fronthaul, and virtualized cloud processing resources. We compare end-to-end orchestration with two other schemes: i) "radio-only" where radio resources are optimized independently from the cloud and ii) "local cloud coordination" where orchestration is only allowed among a local cluster of radio units. We develop several algorithms to solve the end-to-end power minimization and sum spectral efficiency maximization problems. The numerical results demonstrate that end-to-end resource allocation with fully virtualized fronthaul and cloud resources provides a substantial additional power saving than the other resource orchestration schemes.

eess.SP↗

arXiv2023

Energy Harvesting Maximization for Reconfigurable Intelligent Surfaces Using Amplitude Measurements

Energy harvesting can enable a reconfigurable intelligent surface (RIS) to self-sustain its operations without relying on external power sources. In this paper, we consider the problem of energy harvesting for RISs in the absence of coordination with the ambient RF source. We propose a series of sequential phase-alignment algorithms that maximize the received power based on only power measurements. We prove the convergence of the proposed algorithm to the optimal value for the noiseless scenario. However, for the noisy scenario, we propose a linear least squares estimator. We prove that within the class of linear estimators, the optimal set of measurement phases are equally-spaced phases. To evaluate the performance of the proposed method, we introduce a random phase update algorithm as a benchmark. Our simulation results show that the proposed algorithms outperform the random phase update method in terms of achieved power after convergence while requiring fewer measurements per phase update. Using simulations, we show that in a noiseless scenario with a discrete set of possible phase shifts for the RIS elements, the proposed method is sub-optimal, achieving a higher value than the random algorithm but not exactly the maximum feasible value that we obtained by exhaustive search.

eess.SP↗

arXiv2023

Amplitude-Based Sequential Optimization of Energy Harvesting with Reconfigurable Intelligent Surfaces

Reconfigurable Intelligent Surfaces (RISs) have gained immense popularity in recent years because of their ability to improve wireless coverage and their flexibility to adapt to the changes in a wireless environment. These advantages are due to RISs' ability to control and manipulate radio frequency (RF) wave propagation. RISs may be deployed in inaccessible locations where it is difficult or expensive to connect to the power grid. Energy harvesting can enable the RIS to self-sustain its operations without relying on external power sources. In this paper, we consider the problem of energy harvesting for RISs in the absence of coordination with the ambient RF source. We consider both direct and indirect energy harvesting scenarios and show that the same mathematical model applies to them. We propose a sequential phase-alignment algorithm that maximizes the received power based on only power measurements. We prove the convergence of the proposed algorithm to the optimal value under specific circumstances. Our simulation results show that the proposed algorithm converges to the optimal solution in a few iterations and outperforms the random phase update method in terms of the number of required measurements.

eess.SP↗

arXiv2022

Digital Twin Assisted Risk-Aware Sleep Mode Management Using Deep Q-Networks

Base stations (BSs) are the most energy-consuming segment of mobile networks. To reduce BS energy consumption, different components of BSs can sleep when BS is not active. According to the activation/deactivation time of the BS components, multiple sleep modes (SMs) are defined in the literature. In this study, we model the problem of BS energy saving utilizing multiple sleep modes as a sequential MDP and propose an online traffic-aware deep reinforcement learning approach to maximize the long-term energy saving. However, there is a risk that BS is not sleeping at the right time and incurs large delays to the users. To tackle this issue, we propose to use a digital twin model to encapsulate the dynamics underlying the investigated system and estimate the risk of decision-making (RDM) in advance. We define a novel metric to quantify RDM and predict the performance degradation. The RDM calculated by DT is compared with a tolerable threshold set by the mobile operator. Based on this comparison, BS can decide to deactivate the SMs, re-train when needed to avoid taking high risks, or activate the SMs to benefit from energy savings. For deep reinforcement learning, we use long-short term memory (LSTM), to take into account the long and short-term dependencies in input traffic, and approximate the Q-function. We train the LSTM network using the experience replay method over a real traffic data set obtained from an operator BS in Stockholm. The data set contains data rate information with very coarse-grained time granularity. Thus, we propose a scheme to generate a new data set using the real network data set which 1) has finer-grained time granularity and 2) considers the bursty behavior of traffic data. Simulation results show that using proposed methods, considerable energy saving is obtained, compared to the baselines at cost of negligible number of delayed users.

eess.SY↗

arXiv2022

Cell-Free Massive MIMO in Virtualized CRAN: How to Minimize the Total Network Power?

Previous works on cell-free massive MIMO mostly consider physical-layer and fronthaul transport aspects. How to deploy cell-free massive MIMO functionality in a practical wireless system is an open problem. This paper proposes a new cell-free architecture that can be implemented on top of a virtualized cloud radio access network (V-CRAN). We aim to minimize the end-to-end power consumption by jointly considering the radio, optical fronthaul, virtualized cloud processing resources, and spectral efficiency requirements of the user equipments. The considered optimization problem is cast in a mixed binary second-order cone programming form and, thus, the global optimum can be found using a branch-and-bound algorithm. The optimal power-efficient solution of our proposed cell-free system is compared with conventional small-cell implemented using V-CRAN, to determine the benefits of cell-free networking. The numerical results demonstrate that cell-free massive MIMO increases the maximum rate substantially, which can be provided with almost the same energy per bit. We show that it is more power-efficient to activate cell-free massive MIMO already at low spectral efficiencies (above 1 bit/s/Hz).

eess.SP↗

arXiv2021

Ultra-Low-Power IoT Communications: A novel address decoding approach for wake-up receivers

Providing energy-efficient Internet of Things (IoT) connectivity has attracted significant attention in fifth-generation (5G) wireless networks and beyond. A potential solution for realizing a long-lasting network of IoT devices is to equip each IoT device with a wake-up receiver (WuR) to have always-accessible devices instead of always-on devices. WuRs typically comprise a radio frequency demodulator, sequence decoder, and digital address decoder and are provided with a unique authentication address in the network. Although the literature on efficient demodulators is mature, it lacks research on fast, low-power, and reliable address decoders. As this module continuously monitors the received ambient energy for potential paging of the device, its contribution to WuR's power consumption is crucial. Motivated by this need, a low-power, reliable address decoder is developed in this paper. We further investigate the integration of WuR in low-power uplink/downlink communications and, using system-level energy analysis; we characterize operation regions in which WuR can contribute significantly to energy saving. The device-level energy analysis confirms the superior performance of our decoder. The results show that the proposed decoder significantly outperforms the state-of-the-art with a power consumption of 60 nW, at cost of compromising a negligible increase in decoding delay.

eess.SP↗

arXiv2021

Interference management for coexisting Internet of Things networks over unlicensed spectrum

The main building block of Internet of Things (IoT) ecosystem is providing low-cost scalable connectivity for the radio/compute-constrained devices. This connectivity could be realized over the licensed spectrum like Narrowband-IoT (NBIoT) networks, or over the unlicensed spectrum like NBIoT-Unlicensed, SigFox and LoRa networks. In this paper, performance of IoT communications utilizing the unlicensed band, e.g. the 863-870 MHz in the Europe, in indoor use-cases like smart home, is investigated. More specifically, we focus on two scenarios for channel access management: i) coordinated access, where the activity patterns of gateways and sensors are coordinated with neighbors, and ii) uncoordinated access, in which each gateway and its associated nodes work independently from the neighbor ones. We further investigate a distributed coordination scheme in which, devices learn to coordinate their activity patterns leveraging tools from reinforcement learning. Closed-form expressions for capacity of the system, in terms of the number of sustained connections per gateway fulfilling a minimum quality of service (QoS) constraint are derived, and are further evaluated using simulations. Furthermore, delay-reliability and inter network interference-intra network collision performance tradeoffs offered by coordination are figured out. The simulation results highlight the impact of system and traffic parameters on the performance tradeoffs and characterize performance regions in which coordinated scheme outperforms the uncoordinated one, and vice versa. For example, for a packet loss requirement of 1%, the number of connected devices could be doubled by coordination.

eess.SY↗

arXiv2019

Energy Efficient Power Allocation for Device-to-Device Communications Underlaid Cellular Networks Using Stochastic Geometry

In this paper, we study an energy efficiency maximization problem in uplink for D2D communications underlaid with cellular networks on multiple bands. Utilizing stochastic geometry, we derive closed-form expressions for the average sum rate, successful transmission probability, and energy efficiency of cellular and D2D users. Then, we formulate an optimization problem to jointly maximize the energy efficiency of D2D and cellular users and obtain optimum transmission power of both D2D and cellular users. In the optimization problem, we guarantee the QoS of users by taking into account the success transmission probability on each link. To solve the problem, first we convert the problem into canonical convex form. Afterwards, we solve the problem in two phases, energy efficiency maximization of devices and energy efficiency maximization of cellular users. In the first phase, we maximize the energy efficiency of D2D users and feed the solution to the second phase where we maximize the energy efficiency of cellular users. Simulation results reveal that significant energy efficiency can be attained e.g., 10% energy efficiency improvement compared to fix transmission power in high density scenario.

eess.SP↗

arXiv2019

Joint Functional Splitting and Content Placement for Green Hybrid CRAN

A hybrid cloud radio access network (H-CRAN) architecture has been proposed to alleviate the midhaul capacity limitation in C-RAN. In this architecture, functional splitting is utilized to distribute the processing functions between a central cloud and edge clouds. The flexibility of selecting specific split point enables the H-CRAN designer to reduce midhaul bandwidth, or reduce latency, or save energy, or distribute the computation task depending on equipment availability. Meanwhile, techniques for caching are proposed to reduce content delivery latency and the required bandwidth. However, caching imposes new constraints on functional splitting. In this study, considering H-CRAN, a constraint programming problem is formulated to minimize the overall power consumption by selecting the optimal functional split point and content placement, taking into account the content access delay constraint. We also investigate the trade-off between the overall power consumption and occupied midhaul bandwidth in the network. Our results demonstrate that functional splitting together with enabling caching at edge clouds reduces not only content access delays but also fronthaul bandwidth consumption but at the expense of higher power consumption.

cs.NI↗

arXiv2019

Device vs Edge Computing for Mobile Services: Delay-aware Decision Making to Minimize Power Consumption

A promising technique to provide mobile applications with high computation resources is to offload the processing task to the cloud. Utilizing the abundant processing capabilities of the clouds, mobile edge computing enables mobile devices with limited batteries to run resource hungry applications and to save power. However, it is not always true that edge computing consumes less power compared to device computing. It may take more power for the mobile device to transmit a file to the cloud than running the task itself. This paper investigates the power minimization problem for the mobile devices by data offloading in multi-cell multi-user OFDMA mobile edge computing networks. We consider the maximum acceptable delay as QoS metric to be satisfied in our network. We formulate the problem as a mixed integer nonlinear problem which is converted into a convex form using D.C. approximation. To solve the converted optimization problem, we have proposed centralized and distributed algorithms for joint power allocation and channel assignment together with decision-making. Simulation results illustrate that by utilizing the proposed algorithms, considerable power savings can be achieved, e.g., about 60 % for large bit stream size compared to local computing baseline.

cs.IT↗

arXiv2018

Optimized Resource Provisioning and Operation Control for Low-power Wide-area IoT Networks

The tradeoff between cost of the access network and quality of offered service to IoT devices, in terms of reliability and durability of communications, is investigated. We first develop analytical tools for reliability evaluation in uplink-oriented large-scale IoT networks. These tools comprise modeling of interference from heterogeneous interfering sources with time-frequency asynchronous radio-resource usage patterns, and benefit from realistic distribution processes for modeling channel fading and locations of interfering sources. We further present a cost model for the access network as a function of provisioned resources like density of access points (APs), and a battery lifetime model for IoT devices as a function of intrinsic parameters, e.g. level of stored energy, and network parameters, e.g. reliability of communication. The derived models represent the ways in which a required level of reliability can be achieved by either sacrificing battery lifetime (durability), e.g. increasing number of replica transmissions, or sacrificing network cost and increasing provisioned resources, e.g. density of the APs. Then, we investigate optimal resource provisioning and operation control strategies, where the former aims at finding the optimized investment in the access network based on the cost of each resource; while the latter aims at optimizing data transmission strategies of IoT devices. The simulation results confirm tightness of derived analytical expressions, and show how the derived expressions can be used in finding optimal operation points of IoT networks.

cs.IT↗

arXiv2017

Grant-free Radio Access IoT Networks: Scalability Analysis in Coexistence Scenarios

IoT networks with grant-free radio access, like SigFox and LoRa, offer low-cost durable communications over unlicensed band. These networks are becoming more and more popular due to the ever-increasing need for ultra durable, in terms of battery lifetime, IoT networks. Most studies evaluate the system performance assuming single radio access technology deployment. In this paper, we study the impact of coexisting competing radio access technologies on the system performance. Considering $\mathpzc K$ technologies, defined by time and frequency activity factors, bandwidth, and power, which share a set of radio resources, we derive closed-form expressions for the successful transmission probability, expected battery lifetime, and experienced delay as a function of distance to the serving access point. Our analytical model, which is validated by simulation results, provides a tool to evaluate the coexistence scenarios and analyze how introduction of a new coexisting technology may degrade the system performance in terms of success probability and battery lifetime. We further investigate solutions in which this destructive effect could be compensated, e.g., by densifying the network to a certain extent and utilizing joint reception.

cs.IT↗