arXiv subjects

Mi Yang

Publications and source records attributed to Mi Yang.

At least 19 recordsLinked to original sources

arXiv2026

Safety-Aware Forward Detection in Networked ISAC for Low-Altitude UAV Flight

Networked integrated sensing and communication (ISAC) exploits cooperation among multiple ground base stations (GBSs) to support safe uncrewed aerial vehicle (UAV) flight in low-altitude wireless networks (LAWNs). Existing studies mainly focus on communication enhancement or target parameter estimation, while the detection reliability of non-cooperative targets in the UAV forward region remains insufficiently investigated. To address this issue, this paper proposes a safety-aware forward detection design in networked ISAC, where multiple GBSs jointly support UAV downlink communication, state estimation, and non-cooperative target detection within the forward region of interest (ROI). First, the forward ROI is determined by the UAV position, velocity, and safe braking distance, and is voxelized to characterize target-existence states. Then, the Cram\'er-Rao lower bound (CRLB) for UAV state estimation and the forward-ROI miss-detection probability are derived, and their scaling laws are characterized: In detail, the UAV state-estimation CRLB approximately decreases as $\ln^{-2}J$ with the number of cooperative GBSs $J$, while the forward-ROI miss-detection probability follows an exponential-form scaling law as $\lambda_{t}D_{f}\ln^{-2}J$. Furthermore, a safety-aware resource optimization problem is formulated to jointly configure the sensing pilot ratio, transmit power, and beam direction, balancing UAV state-estimation performance and forward detection reliability under the communication-rate constraint. Simulation results show that, compared with the baseline scheme without forward detection, the proposed design reduces the average miss-detection probability and the corresponding sensing-induced collision risk by $17.05\%$, while introducing only limited state-estimation performance degradation, reflected by a $14.82\%$ increase in the average CRLB.

cs.IT↗

arXiv2026

PointNeRT: A Physics Aware Neural Ray Tracing Surrogate for Propagation Channel Modeling

Ray tracing (RT) has emerged as a key tool for propagation channel modeling and network planning. Conventional RT is based on electromagnetic (EM) wave theory and its application relies on detailed mesh-based environment representations and material properties. In realistic environments, limited environmental geometry and material uncertainties hinder its scalability to complex scenarios. In this paper, we propose a novel physics aware neural RT surrogate named PointNeRT to address these limitations. The proposed model directly takes point clouds as environmental input, and efficiently reconstruct multipath without explicitly constructing mesh models or manually defining EM interaction rules. PointNeRT adopts a hop-by-hop modeling strategy guided by physical interaction constraints. It supports sequential prediction of multipath propagation and power attenuation. Numerical results and experiments demonstrate that the proposed method implicitly captures surface normal characteristics and EM material effects. It further achieves robust generalization in mobility scenarios and provides a physics-guided neural modeling of multipath propagation.

eess.SP↗

arXiv2026

Channel Measurements and Modeling based on Composite Environmental Factor for Urban Street-Canyon Intersections

In urban environments, vehicle-to-everything (V2X) communications require accurate wireless channel characterization. This requirement is particularly critical at street-canyon intersections, where building blockage and rich multipath propagation can severely degrade link reliability. Due to its unique environmental layout, the channel characteristics in urban canyon are influenced by building distribution. However, this feature has not been well captured in existing channel models. In this paper, we propose an environment-related statistical channel model based on 5.8~GHz channel measurements. We construct a composite environmental factor to characterize environmental differences in intersections. Then, the factor is incorporated into 3GPP path-loss model and further linked to small-scale channel parameters. Finally, accuracy of the proposed model is validated using second-order channel statistics. The results show that the proposed model can effectively characterize propagation properties of urban street-canyon intersection channels with different building conditions. The proposed model provides a physically interpretable and statistically effective framework for channel simulation and performance evaluation in urban vehicular scenarios.

eess.SP↗

arXiv2026

Environment-Aware Channel Prediction for Vehicular Communications: A Multimodal Visual Feature Fusion Framework

The deep integration of communication with intelligence and sensing, as a defining vision of 6G, renders environment-aware channel prediction a key enabling technology. As a representative 6G application, vehicular communications require accurate and forward-looking channel prediction under stringent reliability, latency, and adaptability demands. Traditional empirical and deterministic models remain limited in balancing accuracy, generalization, and deployability, while the growing availability of onboard and roadside sensing devices offers a promising source of environmental priors. This paper proposes an environment-aware channel prediction framework based on multimodal visual feature fusion. Using GPS data and vehicle-side panoramic RGB images, together with semantic segmentation and depth estimation, the framework extracts semantic, depth, and position features through a three-branch architecture and performs adaptive multimodal fusion via a squeeze-excitation attention gating module. For 360-dimensional angular power spectrum (APS) prediction, a dedicated regression head and a composite multi-constraint loss are further designed. As a result, joint prediction of path loss (PL), delay spread (DS), azimuth spread of arrival (ASA), azimuth spread of departure (ASD), and APS is achieved. Experiments on a synchronized urban V2I measurement dataset yield the best root mean square error (RMSE) of 3.26 dB for PL, RMSEs of 37.66 ns, 5.05 degrees, and 5.08 degrees for DS, ASA, and ASD, respectively, and mean/median APS cosine similarities of 0.9342/0.9571, demonstrating strong accuracy, generalization, and practical potential for intelligent channel prediction in 6G vehicular communications.

cs.CV↗

arXiv2026

Closed-Loop Integrated Sensing, Communication, and Control for Efficient Drone Flight

Low-altitude wireless networks (LAWN) require drones to follow specific trajectories controlled by ground base stations (GBSs). However, given complex low-altitude channel conditions and limited spectrum and power resources, sensing errors and wireless link unreliability cannot be ignored, leading to trajectory deviations that threaten flight safety. To address this issue, this paper proposes an integrated sensing-communication-control (ISCC) closed-loop trajectory tracking approach, aiming to reveal the coupling mechanisms among communication, sensing, and control during drone flight. In detail, we incorporate sensing errors in trajectory state estimation, packet losses in control command transmission, and finite blocklength transmission effects into the closed-loop dynamics. First, through theoretical analysis, we identify the dominant role of the time-frequency resources allocated to control in ensuring system stability and derive a lower bound on the resources required to guarantee stable operation. Second, to minimize tracking error, we formulate a time-frequency resource allocation optimization problem for the sensing, communication, and control components, subject to constraints on communication rate and closed-loop stability. Accordingly, a solution algorithm based on successive convex approximation is proposed. Third, simulation results indicate that once stability is ensured, system performance is primarily determined by sensing accuracy, with the trajectory tracking error exhibiting an approximately linear dependence on the position error bound. Finally, it is shown that the proposed ISCC scheme avoids trajectory divergence under FBL transmission compared with ISCC designs ignoring control packet loss, and could achieve decimeter-level average tracking accuracy, reducing the error to only 17.37% of that observed in the baseline global navigation satellite system scheme.

cs.PF↗

arXiv2026

Deep Learning-Based Site-Specific Channel Modeling and Inference

Site-specific channel inference plays a critical role in the design and evaluation of next-generation wireless communication systems by considering the surrounding propagation environment. However, traditional methods are unscalable. Recently, satellite imagery has emerged as a valuable modality containing rich propagation information for AI-based channel prediction. However, existing approaches using these images are limited to predicting large-scale fading parameters, lacking the capacity to reconstruct the complete channel impulse response (CIR). To address this limitation, we propose a deep learning-based site-specific channel modeling and inference framework using satellite images to predict structured Tapped Delay Line (TDL) parameters. We first establish a joint channel-satellite dataset based on measurements. Then, a novel deep learning network is developed to reconstruct the channel parameters. Specifically, a cross-attention-fused dual-branch pipeline extracts macroscopic and microscopic environmental features, while a recurrent tracking module captures the long-term dynamic evolution of multipath components. Experimental results demonstrate that the proposed method achieves high-quality reconstruction of the CIR in unseen scenarios, with a Power Delay Profile (PDP) Average Cosine Similarity exceeding 0.96. This work provides a pathway toward site-specific channel inference for future dynamic wireless networks.

eess.IV↗

arXiv2026

A Hybrid Model-Assisted Approach for Path Loss Prediction in Suburban Scenarios

Accurate path loss prediction is crucial for wireless network planning and optimization in suburban environments with complex terrain variation and diverse land cover. This paper proposes a model assisted hybrid path loss prediction method that introduces an environment adaptive compensation on top of the classic close-in free-space reference distance (CI) path loss model. By jointly predicting the path loss exponent and a compensation term, the proposed approach dynamically adjusts the empirical trend. To improve the effectiveness of environmental representation, three environmental image organization schemes are constructed and evaluated. Experiments on measurement data collected in Pingtan Island show that the proposed method outperforms the CI model and a conventional model assisted baseline, achieving a test root mean square error of 4.04 dB.

eess.SP↗

arXiv2026

A Multi-Modal Channel Sounding System for Environment-Aware Channel Measurements in 6G Dynamic Scenarios

The deep integration of communication and sensing is widely recognized as a core 6G vision, underscoring the importance of comprehensive environment awareness. Accurate channel modeling forms the foundation of 6G system design and optimization, and channel sounders provide the essential empirical basis. However, existing channel sounders, although supporting wide bandwidth and large antenna arrays in selected bands, generally lack cross-band capability, struggle in dynamic scenarios, and provide limited environmental awareness. The absence of detailed environmental information restricts the development of environment-aware channel models. To address this gap, we propose a multi-modal sensing and channel sounding fusion system that enables temporally and spatially synchronized acquisition of images, point clouds, geolocation information, and multi-band multi-antenna channel data. The modular architecture facilitates rapid deployment in diverse dynamic environments. The system supports 10 MHz-44 GHz operation with up to 1 GHz bandwidth and 1 ns delay resolution, enabling multi-antenna measurements with a minimum switching interval of 8 microseconds. Moreover, it provides centimeter-level environmental sensing and meter-level positioning accuracy. Key metrological performance metrics, including an approximately 130 dB measurable propagation loss at 28 GHz, phase-coherent acquisition, calibrated channel response, LiDAR geometric correction, and bounded multi-modal synchronization margins, are validated through a vehicle-to-infrastructure measurement campaign. The established system provides a scalable experimental platform for environment-aware channel modeling, facilitating the development and evaluation of integrated sensing and communication technologies in future 6G dynamic scenarios.

cs.IT↗

arXiv2026

Artificial Intelligence Empowered Channel Prediction: A New Paradigm for Propagation Channel Modeling

This paper proposes a novel paradigm centered on Artificial Intelligence (AI)-empowered propagation channel prediction to address the limitations of traditional channel modeling. We present a comprehensive framework that deeply integrates heterogeneous environmental data and physical propagation knowledge into AI models for site-specific channel prediction, which referred to as channel inference. By leveraging AI to infer site-specific wireless channel states, the proposed paradigm enables accurate prediction of channel characteristics at both link and area levels, capturing spatio-temporal evolution of radio propagation. Some novel strategies to realize the paradigm are introduced and discussed, including AI-native and AI-hybrid inference approaches. This paper also investigates how to enhance model generalization through transfer learning and improve interpretability via explainable AI techniques. Our approach demonstrates significant practical efficacy, achieving an average path loss prediction root mean square error (RMSE) of $\sim$ 4 dB and reducing training time by 60\%-75\%. This new modeling paradigm provides a foundational pathway toward high-fidelity, generalizable, and physically consistent propagation channel prediction for future communication networks.

eess.SP↗

arXiv2025

Step-GUI Technical Report

Recent advances in multimodal large language models unlock unprecedented opportunities for GUI automation. However, a fundamental challenge remains: how to efficiently acquire high-quality training data while maintaining annotation reliability? We introduce a self-evolving training pipeline powered by the Calibrated Step Reward System, which converts model-generated trajectories into reliable training signals through trajectory-level calibration, achieving >90% annotation accuracy with 10-100x lower cost. Leveraging this pipeline, we introduce Step-GUI, a family of models (4B/8B) that achieves state-of-the-art GUI performance (8B: 80.2% AndroidWorld, 48.5% OSWorld, 62.6% ScreenShot-Pro) while maintaining robust general capabilities. As GUI agent capabilities improve, practical deployment demands standardized interfaces across heterogeneous devices while protecting user privacy. To this end, we propose GUI-MCP, the first Model Context Protocol for GUI automation with hierarchical architecture that combines low-level atomic operations and high-level task delegation to local specialist models, enabling high-privacy execution where sensitive data stays on-device. Finally, to assess whether agents can handle authentic everyday usage, we introduce AndroidDaily, a benchmark grounded in real-world mobile usage patterns with 3146 static actions and 235 end-to-end tasks across high-frequency daily scenarios (8B: static 89.91%, end-to-end 52.50%). Our work advances the development of practical GUI agents and demonstrates strong potential for real-world deployment in everyday digital interactions.

cs.CV↗

arXiv2025

A Geometry Map-Based Site-Specific Propagation Channel Model for Urban Scenarios

With the rapid deployments of 5G and 6G networks, accurate modeling of urban radio propagation has become critical for system design and network planning. However, conventional statistical or empirical models fail to fully capture the influence of detailed geometric features on site-specific channel variances in dense urban environments. In this paper, we propose a geometry map-based propagation channel model that directly extracts key parameters from a 3D geometry map and incorporates the Uniform Theory of Diffraction (UTD) to recursively compute multiple diffraction fields, thereby enabling accurate prediction of site-specific large-scale path loss and time-varying Doppler characteristics in urban scenarios. A well-designed identification algorithm is developed to efficiently detect buildings that significantly affect signal propagation. The proposed model is validated using urban measurement data, showing excellent agreement of path loss in both line-of-sight (LOS) and nonline-of-sight (NLOS) conditions. In particular, for NLOS scenarios with complex diffractions, it outperforms the 3GPP and simplified models, reducing the RMSE by 7.1 dB and 3.18 dB, respectively. Doppler analysis further demonstrates its accuracy in capturing time-varying propagation characteristics, confirming the scalability and generalization of the model in urban environments.

eess.SP↗

arXiv2025

Delay-Doppler Domain Channel Measurements and Modeling in High-Speed Railways

As next-generation wireless communication systems need to be able to operate in high-frequency bands and high-mobility scenarios, delay-Doppler (DD) domain multicarrier (DDMC) modulation schemes, such as orthogonal time frequency space (OTFS), demonstrate superior reliability over orthogonal frequency division multiplexing (OFDM). Accurate DD domain channel modeling is essential for DDMC system design. However, since traditional channel modeling approaches are mainly confined to time, frequency, and space domains, the principles of DD domain channel modeling remain poorly studied. To address this issue, we propose a systematic DD domain channel measurement and modeling methodology in high-speed railway (HSR) scenarios. First, we design a DD domain channel measurement method based on the long-term evolution for railway (LTE-R) system. Second, for DD domain channel modeling, we investigate quasi-stationary interval, statistical power modeling of multipath components, and particularly, the quasi-invariant intervals of DD domain channel fading coefficients. Third, via LTE-R measurements at 371 km/h, taking the quasi-stationary interval as the decision criterion, we establish DD domain channel models under different channel time-varying conditions in HSR scenarios. Fourth, the accuracy of proposed DD domain channel models is validated via bit error rate comparison of OTFS transmission. In addition, simulation verifies that in HSR scenario, the quasi-invariant interval of DD domain channel fading coefficient is on millisecond (ms) order of magnitude, which is much smaller than the quasi-stationary interval length on 100 ms order of magnitude. This study could provide theoretical guidance for DD domain modeling in high-mobility environments, supporting future DDMC and integrated sensing and communication designs for 6G and beyond.

eess.SP↗

arXiv2025

A Novel Site-Specific Inference Model for Urban Canyon Channels: From Measurements to Modeling

With the rapid development of intelligent transportation and smart city applications, urban canyon has become a critical scenario for the design and evaluation of wireless communication systems. Due to its unique environmental layout, the channel characteristics in urban canyon are strongly a street geometry and building distribution, thereby exhibiting significant site-specific channel condition. However, this feature has not been well captured in existing channel models. In this paper, we propose a site-specific channel inference model based on environmental geometry, the model is parameterized using sub-6GHz channel measurements. Multipath components (MPCs) are extracted and clustered according to geometric propagation, which are explicitly derived from the influence of canyon width, thereby establishing an interpretable mapping between the physical environment and statistical characteristics of MPCs. A step-by-step implementation scheme is presented. Subsequently, the proposed site-specific channel inference model is validated by comparing second-order statistics of channels, derived from the model and measurements. The results show that the proposed model achieves high accuracy and robustness in different urban canyon scenarios.

eess.SP↗

arXiv2025

Deep Learning Based Dynamic Environment Reconstruction for Vehicular ISAC Scenarios

Integrated Sensing and Communication (ISAC) technology plays a critical role in future intelligent transportation systems, by enabling vehicles to perceive and reconstruct the surrounding environment through reuse of wireless signals, thereby reducing or even eliminating the need for additional sensors such as LiDAR or radar. However, existing ISAC based reconstruction methods often lack the ability to track dynamic scenes with sufficient accuracy and temporal consistency, limiting the real world applicability. To address this limitation, we propose a deep learning based framework for vehicular environment reconstruction by using ISAC channels. We first establish a joint channel environment dataset based on multi modal measurements from real world urban street scenarios. Then, a multistage deep learning network is developed to reconstruct the environment. Specifically, a scene decoder identifies the environmental context such as buildings, trees and so on; a cluster center decoder predicts coarse spatial layouts by localizing dominant scattering centers; a point cloud decoder recovers fine grained geometry and structure of surrounding environments. Experimental results demonstrate that the proposed method achieves high-quality dynamic environment reconstruction with a Chamfer Distance of 0.29 and F Score@1% of 0.87. In addition, complexity analysis demonstrates the efficiency and practical applicability of the method in real time scenarios. This work provides a pathway toward low cost environment reconstruction based on ISAC for future intelligent transportation.

eess.SP↗

arXiv2025

Delay-Doppler Domain Signal Processing Aided OFDM (DD-a-OFDM) for 6G and Beyond

High-mobility scenarios will be a critical part of 6G systems. Since the widely deployed orthogonal frequency division multiplexing (OFDM) waveform suffers from subcarrier orthogonality loss under severe Doppler spread, delay-Doppler domain multi-carrier (DDMC) modulation systems, such as orthogonal time frequency space (OTFS), have been extensively studied. While OTFS can exploit time-frequency (TF) domain channel diversity, it faces challenges including high receiver complexity and inflexible TF resource allocation, making OFDM still the most promising waveform for 6G. In this article, we propose a DD domain signal processing-aided OFDM (DD-a-OFDM) scheme to enhance OFDM performance based on DDMC research insights. First, we design a DD-a-OFDM system structure, retaining the classical OFDM transceiver while incorporating DD domain channel estimation and TF domain equalization. Second, we detail DD domain channel estimation using discrete TF pilots and prove that TF domain inter-carrier interference (ICI) could be transformed into DD domain Gaussian interference. Third, we derive closed-form Cram\'{e}r-Rao lower bounds (CRLBs) for DD domain channel estimation. Fourth, we develop maximum likelihood (ML) and peak detection-based channel estimators, along with a corresponding TF domain equalizer. Numerical results verify the proposed design, showing that DD-a-OFDM reduces the bit-error rate (BER) compared to classical OFDM and outperforms OTFS in channel estimation accuracy with lower pilot overhead.

eess.SP↗

arXiv2025

Sensing-Enhanced Handover Criterion for Low-Altitude Wireless Network (LAWNs)

With the rapid growth of the low-altitude economy, the demand for cellular-enabled low-altitude wireless networks (LAWN) is rising significantly. The three-dimensional mobility of drones will lead to frequent handovers (HOs) in cellular networks, while traditional reference signal received power (RSRP)-based criteria may fail to capture the dynamic environment, causing redundant HOs or HO failures. To address this issue and motivated by the underutilization of sensing information in conventional HO mechanisms, we propose a novel HO activation criterion for drone systems that integrates both sensing parameters provided by integrated sensing and communication (ISAC) signals and RSRP. First, we construct an ISAC signal model tailored for low-altitude scenarios and derive the Cram\'er--Rao lower bound for sensing distance estimation. Subsequently, we propose a novel joint HO criterion that extends the conventional RSRP-based method by integrating sensing information from ISAC signals, enabling more reliable HOs in dynamic drone environments. Simulation results show that the joint HO criterion outperforms the baseline RSRP-based criterion under different signal-to-noise ratio (SNR) and sensing pilot ratio conditions. Particularly, when the SNR exceeds 0dB and the sensing pilot ratio is 20%, the proposed joint HO criterion reduces the average HO region length by 75.20% and improves the activation probability by 76.31%.

cs.IT↗

arXiv2025

Channel Semantic Characterization for Integrated Sensing and Communication Scenarios: From Measurements to Modeling

With the advancement of sixth-generation (6G) wireless communication systems, integrated sensing and communication (ISAC) is crucial for perceiving and interacting with the environment via electromagnetic propagation, termed channel semantics, to support tasks like decision-making. However, channel models focusing on physical characteristics face challenges in representing semantics embedded in the channel, thereby limiting the evaluation of ISAC systems. To tackle this, we present a novel framework for channel modeling from the conceptual event perspective. By leveraging a multi-level semantic structure and characterized knowledge libraries, the framework decomposes complex channel characteristics into extensible semantic characterization, thereby better capturing the relationship between environment and channel, and enabling more flexible adjustments of channel models for different events without requiring a complete reset. Specifically, we define channel semantics on three levels: status semantics, behavior semantics, and event semantics, corresponding to channel multipaths, channel time-varying trajectories, and channel topology, respectively. Taking realistic vehicular ISAC scenarios as an example, we perform semantic clustering, characterizing status semantics via multipath statistical distributions, modeling behavior semantics using Markov chains for time variation, and representing event semantics through a co-occurrence matrix. Results show the model accurately generates channels while capturing rich semantic information. Moreover, its generalization supports customized semantics.

eess.SP↗

arXiv2025

A CGAN-LSTM-Based Framework for Time-Varying Non-Stationary Channel Modeling

Time-varying non-stationary channels, with complex dynamic variations and temporal evolution characteristics, have significant challenges in channel modeling and communication system performance evaluation. Most existing methods of time-varying channel modeling focus on predicting channel state at a given moment or simulating short-term channel fluctuations, which are unable to capture the long-term evolution of the channel. This paper emphasizes the generation of long-term dynamic channel to fully capture evolution of non-stationary channel properties. The generated channel not only reflects temporal dynamics but also ensures consistent stationarity. We propose a hybrid deep learning framework that combines conditional generative adversarial networks (CGAN) with long short-term memory (LSTM) networks. A stationarity-constrained approach is designed to ensure temporal correlation of the generated time-series channel. This method can generate channel with required temporal non-stationarity. The model is validated by comparing channel statistical features, and the results show that the generated channel is in good agreement with raw channel and provides good performance in terms of non-stationarity.

eess.SP↗